Join TMS MCU fails with "no ip bandwidth...". »

Similar Questions

• Problems with allocation of bandwidth TMS on server TP

  I have questions, get MSDS to schedule a call 6 Mbps to a telepresence server.

  When I create a reservation on the server TP using TMS, I can choose any bandwidth (2560 Kbps, 4096 Kbps, 6144 Kbps etc.).  Regardless of bandwidth, I put the Conference, which is the rate of calls that TP server connects with, EXCEPT 6144 Kbps.  Whenever I put it to 6144 Kbps, the rate of appeal dates back to 1920 Kbps.

  If I dial a number from the server TP itself, everything connects to 6 Mbps OK (even with dial back in).

  Looking at the history of calls on the CV, the server TP requests only 1920 Kbps when off numbering of a TMS to the meeting request is set to 6144 Kbps.

  All bandwidth restrictions have been removed from the VCS, the end points of support 6 Mbps (as evidenced by the Ad - Hoc numbering work OK in each direction).  It seems that the TMS set the bandwidth of conference of 1920 Kbps (or, failing to set a bandwidth of conference at all) despite set to 6144 Kbps.

  VCS: 7.2

  TP server: 3.0 (2.24)

  TMS: 13.2

  Any help appreciated

  Hello

  It is CSCud72945, fixed the TMS 14.2.

  Kind regards

  Kjetil

• Good afternoon, to join the plan VIP but fails with this message: the invitation code is not valid

  
  
  Good afternoon, to join the plan VIP but fails with this message: the invitation code is not valid

  
  

  Did you check with your plan administrator?

• Microsoft SQL Server 2014 (SP1 - CU4) (KB3106660) query failed with error ORDER BY items must appear in the select list if SELECT DISTINCT is specified.

  Hello
  I use Microsoft SQL Server 2014 (SP1 - CU4) (KB3106660) Enterprise Edition (64-bit) on Windows NT 6.1 (Build 7601: Service Pack 1)

  SELECT DISTINCT A.PI_LOOKUP_CATEGORY_ID,
  REPLACE (REPLACE (UPPER (A.LOOKUP_CATEGORY_NAME), ' ', '_'), '-', '_') AS CATEGORY_TECH_NAME,
  A.LOOKUP_CATEGORY_NAME,
  A.LOOKUP_CATEGORY_DESCR,
  COUNT (B.PI_LOOKUP_CATEGORY_ID) AS USAGE_COUNT
  FROM [PI_LOOKUP_CATEGORY] A LEFT OUTER JOIN B [PI_INSIGHT_COLUMN] WE
  A.PI_LOOKUP_CATEGORY_ID = B.PI_LOOKUP_CATEGORY_ID
  A.PI_LOOKUP_CATEGORY_ID GROUP,
  REPLACE (REPLACE (UPPER (A.LOOKUP_CATEGORY_NAME), ' ', '_'), '-', '_').
  A.LOOKUP_CATEGORY_NAME,
  A.LOOKUP_CATEGORY_DESCR
  ORDER TO REPLACE (REPLACE (UPPER (A.LOOKUP_CATEGORY_NAME), ' ', '_'), '-', '_')

  above request is failed with error ' ORDER BY items must appear in the select list if SELECT DISTINCT is specified. " Microsoft SQL Server (SP1 - CU4) 2014 (KB3106660)

  same query works fine with older versions of SQL servers like (2008R2, or 2012)

  Please let me know the resolution of this problem...

  Thank you
  Touria

  Ask here:

  MSDN - SQL Server - Microsoft forums

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• This is how a SELECT query fails with ORA-1555 occur?

  11 GR 2/RHEL 6.2

  I would like to know exactly how a SQL fails with error ORA-1555.

  Please take a look at the following simple example.

  INVENTORY_DETAIL is a table that stores information about items in a store.

  For this DB UNDO_RETENTION is set to 3 600 (1 hour) and TUNED_UNDO_RETENTION Meanwhile 5400 (1.5 hours)

  At 15:00, there's 12 Logitek involved in inventory.

  ITEM_ID NOM_ELEMENT STOCK_LEFT

  --------- -------------------- ----------

  8432 LOGITEK 12 SPEAKER

  At 15:00 Session1, starts a SELECT large with several tables joins query. Something like

  Select id.item_id, id.item_name, su.supplier_price, su.supplier_code

  Su.batch_code...
  

  of INVENTORY_DETAIL id join in-house suppliers knew on (id.supplier_id = su.supplier_id)

  ...

  ..

  03:02, Session1 reads the block that stores the line with item_id = 8432 and learns that he has 12 Logitek left speakers.

  15:10, Session2 delivers the next UPDATE and he agrees immediately.

  Update inventory_detail set stock_left = 7 where item_id = 8432;

  commit;

  The UNDO data for Session2 transaction are stored in the measure of cancellation remaining, and the UNDO data gets debusquees at 04:40 when the TUNED_UNDO_RETENTION of 1.5 hours is crossed at 16:40.

  Because of the bad of e/s, query SELECT of Session1 manages to retrieve all the records only from 17:00.

  But session1 notice this line with item_id = 8432 changed. Now, there's only 7 Logitek speakers which is inconsistent with what he learned at 15:02 (who was then at 12). Because of this incompatibility SO not able to recover data UNDO on this gap, ORA-1555 is thrown. My assumptions are good?

  3:10PM                             4:10PM                          4:40PM                       5:00PM

  |===================================|-------------------------------|-----------------------------|

  UNDO_RETENTION = 1 HR retention Undo Tuned = 1.5 h finishes of request for enforcement

  Martin, you asked, "are the correct on the circumstances that led to ORA-1555 my explanations?  The answer is no.  Oracle does not notice at the end of the query that changed a line he read.  Instead, each read line is at the same point in time.  When Oracle sees that a row has changed Oracle reads the UNDO segments to find the version of the data corresponding to the query start time.  If these data cannot be found the ORA-01555 error is raised.

  - -

  HTH - Mark D Powell.

• Automatic failover with Transport and apply Lag fails with ORA-16798

  Hello
  I configured a physical database maximum Performance, accelerated failover mode standby. I set FastStartFailoverLagLimit to 3 hours (10800 seconds).

  If I understand the Oracle documentation, Fast-Start failover should work with Max Performance, as long the Transport timeout is whithin the FastStartFailoverLagLimit.

  
  So I started a few scripts, generated some loading, so I have a Transport and apply the shift of 3-4 Minutes.
  Then I killed pmon to cause an automatic failover.

  Failover failed with ORA-16798.

  I know, there is Note 846087.1 , which describes the problem, but I thought that automatic failover should work in this configuration.
  Is this a bug or am I wrong?

  Thank you very much in advance.

  
  Configuration Data Guard standby:
  -----------------------------------------------

  Role: STANDBY PHYSICS
  State of destination: apply
  Transport delay: 3 minutes 3 seconds (calculated two seconds ago)
  Apply the Lag: 3 minutes 26 seconds (calculated 0 seconds ago)
  Apply the rate: 23,52 MB/s
  Real-time query: OFF
  Occurrence (s):
  ...

  Properties:
  ...
  LogXptMode = "async".
  DelayMins = '0'
  Binding = "optional."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "15"
  RedoCompression = "DISABLE."
  ...

  State of the database:
  SUCCESS

  Fast failover configuration:
  -----------------------------------------------

  Fast-Start Failover: ENABLED

  Threshold: 180 seconds
  Target: < Targetname >
  Observer: < servername >
  Offset limit: 10800 seconds
  Primary closure: TRUE
  Auto-Rétablir: TRUE
  Reconnection of the observer: (none)
  Substitution of the observer: FALSE

  ...

  
  Messages of the DG - Log:
  -----------------------------------------------
  FAILOVER TO < DB >
  Starting failover to the < DB > database
  Notifying Oracle Clusterware to disassembly for the FAILOVER database
  02/02/2015-13:38:04
  Error running SQL = 604, sql = [ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FI
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-00283: cool cancelled due to errors
  ORA-16171: RECOVER... FINISHING not allowed away for thr 1, seq 34-37
  Failed to retrieve Terminal.
  Database error resource SetState (16798)
  02/02/2015-13:38:08
  Command FAILOVER < DB > completed with error ORA-16798

  
  

  The FastStartFailoverLagLimit property specifies the amount of data, in seconds, during which the standby database target can

  delay on the main database on the recovery plan applied. If again applied Eve point database notes that many

  seconds of the primary database redo point generation, accelerated tipping is allowed.

  Errors show a gap for sequences 34-37, which is not optimal for a fast failover.

  Even if FastStartFailoverLagLimit is set to 3 hours, there is too much data loss for the standby site because newspapers are not available on the backup server and the Broker cannot activate the Pb of the day before.

  I recommend to to lean on increase the bandwidth network.

  Concerning

• patch p11879896_112020_Generic failed with the missing req for error computer

  Hello
  Apply the fix for issue on Linux 32 with
  
  opatch apply - invPtrLoc /u01/app/oraInventory/oraInst.loc
  
  has failed (with message
  Patch 11879896 : Required or missing components: [oracle.sysman.console.db, 11.2.0.2.0]),
  
  debugging follows below. Any idea?
  
  Thank you.
  
  Anatoliy
  
  _osArch is
  /u01/app/oracle/product/11.2.0/home11gR2/jdk/bin/java -mx96m -cp /u01/app/oracle/product/11.2.0/home11gR2/OPatch/ocm/lib/emocmutl.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/OraInstaller.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/share.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/srvm.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/orai18n-mapping.jar:/u01/app/oracle/product/11.2.0/home11gR2/oui/jlib/xmlparserv2.jar:/u01/app/oracle/product/11.2.0/home11gR2/OPatch/jlib/opatch.jar:/u01/app/oracle/product/11.2.0/ home11gR2/OPatch/jlib/opatchutil.jar:/U01/app/Oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchprereq.jar:/U01/app/Oracle/product/11.2.0/home11gR2/OPatch/jlib/opatchactions.jar:-DOPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2-DOPatch.DEBUG=true-DOPatch.RUNNING_DIR=/u01/app/oracle/product/11.2.0/home11gR2/OPatch oracle/opatch/OPatch apply - invPtrLoc /u01/app/oraInventory/oraInst.loc
  Citing O Patch 11.1 .0.6.6
  
  Setup Oracle interim Patch version 11.1.0.6.6
  Copyright (c) 2009, Oracle Corporation. All rights reserved.
  
  CmdLineParser::initRuntimeOptions()
  Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ StringArguments
  A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ StringArguments
  There are 7 fields defined in this class.
  Add option "fp".
  Add option "dp".
  Add option "fr".
  Add option "dr."
  Add option "mp".
  Add option 'phbasedir '.
  Add option 'phbasefile '.
  Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ BooleanArguments
  A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ BooleanArguments
  There are 2 fields defined in this class.
  Add option 'delay_link '.
  Add option "cmd_end.
  Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ IntegerArguments
  A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ IntegerArguments
  There are 2 fields defined in this class.
  Add option 'integerarg1 '.
  Add option 'integerarg2 '.
  Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ StringtegerArguments
  A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ StringtegerArguments
  There are 5 fields defined in this class.
  Add option 'stringtegerarg1 '.
  Add option 'stringtegerarg2 '.
  Add option "ps".
  Add option "mp".
  Add option "xmlinput.
  Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ DoubleArguments
  A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ DoubleArguments
  There are 2 fields defined in this class.
  Add option 'doublearg1 '.
  Add option 'doublearg2 '.
  Audit on the class oracle.opatch.opatchutil.CmdLineOptions$ RawStringArguments
  A list of the fields defined in the class oracle.opatch.opatchutil.CmdLineOptions$ RawStringArguments
  There are 1 fields defined in this class.
  Add option "cmd".
  CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchutil.OUSession".
  option string initialization 0, fp
  initialization of string option1, dp
  initialization of string option 2, en
  option during initialization of channel 3, dr
  4, MP initialization string option
  initialization string 5 option, phbasedir
  initialization string 6 option, phbasefile
  does init. String argument.
  initialization of the Boolean option 0, delay_link
  initialization of the Boolean option 1, cmd_end
  does init. Boolean argument.
  initialization option to the integer 0, integerarg1
  the initialization of the whole number 1 option, integerarg2
  does init. Integer argument.
  initialization of StringTeger option 0, stringtegerarg1
  initialization of option StringTeger 1, stringtegerarg2
  initialization of StringTeger option 2, ps
  initializing StringTeger option 3, mp
  initialization of StringTeger option 4, xmlinput
  does init. SringTeger arg
  the initialization of the Double option 0, doublearg1
  the initialization of the Double option 1, doublearg2
  does init. Double argument.
  initialization of RawString option 0, cmd
  does init. RawString arg.
  CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchutil.OUSession", actually.
  CmdLineParser::initRuntimeOptions()
  Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ StringArguments
  A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ StringArguments
  There are 3 fields defined in this class.
  Add option 'phbasedir '.
  Add option "patchids.
  Add option 'phbasefile '.
  Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ BooleanArguments
  A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ BooleanArguments
  There are 2 fields defined in this class.
  Add option 'booleanarg1 '.
  Add option 'booleanarg2 '.
  Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ IntegerArguments
  A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ IntegerArguments
  There are 2 fields defined in this class.
  Add option 'integerarg1 '.
  Add option 'integerarg2 '.
  Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ StringtegerArguments
  A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ StringtegerArguments
  There are 2 fields defined in this class.
  Add option 'stringtegerarg1 '.
  Add option 'stringtegerarg2 '.
  Audit on the class oracle.opatch.opatchprereq.CmdLineOptions$ DoubleArguments
  A list of the fields defined in the class oracle.opatch.opatchprereq.CmdLineOptions$ DoubleArguments
  There are 2 fields defined in this class.
  Add option 'doublearg1 '.
  Add option 'doublearg2 '.
  CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchprereq.PQSession".
  initialization string 0 option, phbasedir
  the initialization of the option channel 1, patchids
  initialization of string option 2, phbasefile
  does init. String argument.
  the initialization Boolean option 0, booleanarg1
  the initialization of the Boolean option 1, booleanarg2
  does init. Boolean argument.
  initialization option to the integer 0, integerarg1
  the initialization of the whole number 1 option, integerarg2
  does init. Integer argument.
  initialization of StringTeger option 0, stringtegerarg1
  initialization of option StringTeger 1, stringtegerarg2
  does init. SringTeger arg
  the initialization of the Double option 0, doublearg1
  the initialization of the Double option 1, doublearg2
  does init. Double argument.
  CmdLineHelper::loadRuntimeOption() for the class "oracle.opatch.opatchprereq.PQSession", actually.
  reqVer to use getEnv() = 10.2.0.4.0
  curVer = 11.2.0.1.0
  Worm of the current later that required? : true
  Current ver is equal to required? : false
  Checking the EMDROOT using the API of YES...
  CmdLineParser.processOPatchProperties () starts
  Ends of CmdLineParser.processOPatchProperties)
  OUIReplacer called::runEnvScript()
  SystemCall:RuntimeExec(cmds,_runDir): GOING to start to thread to read the input stream
  SystemCall:RuntimeExec(cmds,_runDir): Started thread to read the input stream
  SystemCall:RuntimeExec(cmds,_runDir): GOING to start to thread to read the error stream
  ::Run() ReaderThread: Stream InputStream about to be read
  SystemCall:RuntimeExec(cmds,_runDir): Started thread to read the error stream
  SystemCall:RuntimeExec(cmds,_runDir): ENTER process.WAITFOR()
  ::Run() ReaderThread: ErrorStream stream being read
  ::Run() ReaderThread: Stream InputStream finished reading
  ::Run() ReaderThread: reading stream ErrorStream completed
  SystemCall:RuntimeExec(cmds,_runDir): process.WAITFOR() is ON
  SystemCall:RuntimeExec(cmds,_runDir): Wire flow error joined with success
  SystemCall:RuntimeExec(cmds,_runDir): Input stream thread joined with success
  OUIReplacer called::setKeyValue()
  OPatchSession::main()
  Environment:
  OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
  oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
  Oracle.Installer.oui_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
  Oracle.Installer.library_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui/lib/Linux
  Oracle.Installer.startup_location=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
  OPatch.PLATFORM_ID =
  OS. Name = Linux
  OPatch.NO_FUSER =
  OPatch.SKIP_VERIFY = null
  OPatch.SKIP_VERIFY_SPACE = null
  oracle.installer.clusterEnabled = false
  TRACING. ENABLED = TRUE
  TRACING. LEVEL = 2
  OPatch.DEBUG = true
  OPATCH_VERSION = 11.1.0.6.6
  Delivered OPatch property file = properties
  Minimum version of YES: 10.2
  OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
  Independent House: false
  
  
  Environment:
  OPatch.ORACLE_HOME=/u01/app/oracle/product/11.2.0/home11gR2
  oracle.installer.invPtrLoc=/u01/app/oraInventory/oraInst.loc
  Oracle.Installer.oui_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
  Oracle.Installer.library_loc=/U01/app/Oracle/product/11.2.0/home11gR2/Oui/lib/Linux
  Oracle.Installer.startup_location=/U01/app/Oracle/product/11.2.0/home11gR2/Oui
  OPatch.PLATFORM_ID =
  OS. Name = Linux
  OPatch.NO_FUSER =
  OPatch.SKIP_VERIFY = null
  OPatch.SKIP_VERIFY_SPACE = null
  oracle.installer.clusterEnabled = false
  TRACING. ENABLED = TRUE
  TRACING. LEVEL = 2
  OPatch.DEBUG = true
  OPATCH_VERSION = 11.1.0.6.6
  Delivered OPatch property file = properties
  Minimum version of YES: 10.2
  OPatch.PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin:/u01/app/oracle/product/11.2.0/home11gR2/bin:/u01/app/oracle/product/11.2.0/home11gR2/OPatch
  Independent House: false
  
  
  
  Oracle home: /u01/app/oracle/product/11.2.0/home11gR2
  Inventory Center: / u01/app/oraInventory
  from: /u01/app/oraInventory/oraInst.loc
  OPatch version: 11.1.0.6.6
  YES version: 11.2.0.1.0
  YES location: /u01/app/oracle/product/11.2.0/home11gR2/oui
  Location of the log file: /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch2012-01-19_04-10-13AM.log
  
  History of patch file: /u01/app/oracle/product/11.2.0/home11gR2/cfgtoollogs/opatch/opatch_history.txt
  
  OUISessionManager::instantiate()
  lockCentralInventory(): OUISessionManager::lockCentralInventory() retries 0 times with every 120 seconds to get a lock of the inventory.
  Try OUISessionManager::lockCentralInventory() round # 1
  OUISessionManager::setupSession()
  OUISessionManager::setupSession() instantiates an OUIInventorySession obj.
  OUISessionManager::setupSession() init. the session
  OUISessionManager::setupSession() implements READ ONLY session
  OUISessionManager::setupSession() done
  OUISessionManager::lockCentralInventory() configure session OK
  reqVer = 10.2
  curVer = 11.2.0.1.0
  Worm of the current later that required? : true
  Current ver is equal to required? : false
  ApplySession::process()
  ApplySession::process(): loading object patch.
  ApplySession::loadAndInitPatchObject()
  PatchObject (patchLocation)
  PatchObject::PatchObject looking for file /u01/app/oraInventory/etc/config/actions.xml actions
  PatchObject::PatchObject looking for the file /u01/app/oraInventory/etc/config/inventory.xml inventory
  parserXMLFile: start
  parserXMLFile: start
  
  Bugs fixed by this patch 11879896 :
  11879896: SMPSSE: OVERVIEW OF THE PERFORMANCE OF DATABASE DOES NOT WORK ON MAC/LINUX
  
  PatchObject::setPreReadMeAction: readMeFile = /u01/app/oraInventory/custom/pre.txt
  noOp = true
  fileContent =
  PatchObject::setPreScriptAction: [PreScriptAction:-]
  no - op = true, fileLoc = / u01/app/oraInventory/custom/scripts/pre
  [Pre script is not present.-]
  
  PatchObject::setPostReadMeAction: readMeFile = /u01/app/oraInventory/custom/post.txt
  noOp = true
  fileContent =
  PatchObject::setPostScriptAction: [PostScriptAction:-]
  no - op = true, fileLoc = / u01/app/oraInventory/custom/scripts/post
  [Post script does not exist.-]
  
  PatchObject::setInitReadMeAction: readMeFile = /u01/app/oraInventory/custom/init.txt
  noOp = true
  fileContent =
  PatchObject::setInitScriptAction: [InitScriptAction:-]
  no - op = true, fileLoc = / u01/app/oraInventory/custom/scripts/init
  [Init script does not exist.-]
  
  Fix provisional application '11879896' ApplySession to OH ' / u01/app/oracle/product/11.2.0/home11gR2'
  ApplySession::processLocal()
  OPatchEnv:
  ["OPatchEnv: OracleHome="/u01/app/oracle/product/11.2.0/home11gR2 ", force = false, value = false, mod. inv. = true, the system mod. = true, local mode = false, all the lsinv = false, lsinv detail = false, lsinv patch = false, nolink = false, Retry = 30, delay = 120, CallerName = OPatch, CallerVersion = 11.1.0.6.6, SessionType = apply, JdkLoc=/u01/app/oracle/product/11.2.0/home11gR2/jdk, JreLoc=/u01/app/oracle/product/11.2.0/home11gR2/jre/1.4.2] , OracleHome via-oh = OracleHome via env.=/u01/app/oracle/product/11.2.0/home11gR2, via the response file OracleHome =, OPatch recognized InvPtrLoc=/u01/app/oraInventory/oraInst.loc, InvPtrLoc=/u01/app/oraInventory/oraInst.loc is specified by the user, without re-creating a link = false, Patch ID used in Rollback =, Patch ID with OPack timestamp =, PreOpt =, PostOpt =, OSName = Linux, is = false,.patch_storage=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage , .patch_storage / < ID > =/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/ entire Patch is saved to=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//original_patch, backup restore path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//backup backup for Rollback path=/u01/app/oracle/product/11.2.0/home11gR2/.patch_storage//files, FilesMap info from=/u01/app/oracle/product/11.2.0/home11gR2/inventory/oneoffs/ < patch_id > [, PatchLoc = / u01/app/oraInventory, SyntaxErrorMsg =]
  Process InitReadMeAction()
  InitReadMeAction::catFile() is a no - op
  InitScriptAction::process() is a no - op
  Checking prerequisites 'CheckApplicableProduct '...
  
  PrereqAPI::checkApplicableProduct
  PrereqAPI::checkStandAloneHome())
  PREREQ checkApplicableProduct spent
  OPatch checks if the patch is applicable to this type of product home
  ApplySession::setupPatchStorage()
  ApplySession::processLocal() load inventory
  OracleHomeInventory::createInventoryObj()
  OracleHomeInventory::createInventoryObj() gets OUIInventorySession object
  Locker: lock()
  call of lockCentralInventory()
  OUISessionManager::getInventorySession()
  Details of the appellant:
  Name calling: OPatch calling Version: 11.1.0.6.6 requested access read-only: false Oracle Home: /u01/app/oracle/product/11.2.0/home11gR2
  OUISessionManager::instantiate()
  lockCentralInventory(): OUISessionManager::lockCentralInventory() retries 30 times with every 120 seconds to get a lock of the inventory.
  Try OUISessionManager::lockCentralInventory() round # 1
  OUISessionManager::setupSession()
  OUISessionManager::setupSession() instantiates an OUIInventorySession obj.
  OUISessionManager::setupSession() init. the session
  OUISessionManager::setupSession() put in place the session of READING / WRITING
  OUISessionManager::setupSession() done
  OUISessionManager::lockCentralInventory() configure session OK
  OUISessionManager::register()
  Record of the appellant: OPatch
  Locker::Lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage does exist, no need of mkdir.
  Locker::Lock(): /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free exists, will delete the file.
  Locker: lock() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
  OracleHomeInventory::createInventoryObj() gets OUIInstallAreaControl object
  OracleHomeInventory::createInventoryObj() gets OUIInstallInventory object
  OracleHomeInventory::createInventoryObj() gets OUIOracleHomeInfo object
  OracleHomeInventory::createInventoryObj() built
  OracleHomeInventory::load()
  OracleHomeInventory::load() Gets a vector of all categories of products
  OracleHomeInventory::load() Gets a vector of all the unique entries
  OracleHomeInventory::load() starts to process the raw data of the YES to accumulate the primitive classes OPatch
  RAC::GetInstance()
  initializing racType
  RAC::getClusterNodes()
  call OiiOracleHomeInfo::getNodeList()
  OiiiOracleHomeInfo::getNodeList() returned 0 items.
  RAC::getClusterNodes() returns a list of items from 0.
  The user has not used - no_inventory, then why clusterNodes are empty?
  clusterNodes is null or empty, set racType to NO_RAC
  checkIfSidAddition()
  OracleHomeInventory::load()
  OracleHomeInventory::load() Gets a vector of all categories of products
  OracleHomeInventory::load() Gets a vector of all the unique entries
  OracleHomeInventory::load() starts to process the raw data of the YES to accumulate the primitive classes OPatch
  ApplySession::processConflict()
  PrereqAPI::checkConflictAgainstOHWithDetail()
  
  Number of Oneoffs in the Oracle home: 0
  PrereqAPI::checkConflictAgainstOH()
  
  List of patches on which runs the prereq InterConflict are:
  11879896
  OneOffEntry::getBugIDsFixed()
  OneOffEntry::getBugIDsFixed() returns 1 bugs.
  
  There is no conflict/supersets.
  PREREQ checkConflictAgainstOHWithDetail Passed
  Run all the prereqs associated with apply.
  
  Prior running check...
  
  Checking prerequisites 'CheckForInputValues '...
  PrereqAPI::checkForInputValues()
  Input values is present for all the shares of the given patches.
  
  Checking prerequisites 'CheckSystemSpace '...
  PrereqAPI::checkSystemSpace()
  
  Find the total space required...
  
  Space required for patches are total: 11865356
  
  Checking if a space is present on the disk...
  
  Amount of required space is available on the disk.
  PREREQ checkSystemSpace Passed
  Enough space system is available.
  
  Checking prerequisites 'CheckPatchApplicableOnCurrentPlatform '...
  PrereqAPI::checkPatchApplicableOnCurrentPlatform()
  Read the platforms for patch11879896
  
  Genereic 0est platform ID specified for the patch: 11879896
  All the given patches are applied on the current platform.
  
  Checking prerequisites 'CheckSystemCommandAvailable '...
  PrereqAPI::checkSystemCommandAvailable()
  Rules: shouldSearchOrInvokeFuser()
  the user did not OPATCH_NO_FUSER but executable list is null or empty, return false.
  
  PatchObject: Patch will need of following commands:
  --------------------------------------------------------------------
  Archives of fuser need do sqlplus ptlpatch mkpatch
  false false false false false false
  --------------------------------------------------------------------
  Do the sqlplus ptlpatch Archives of fuser mkpatch
  true true true true true true
  
  
  All the required commands are available.
  PREREQ checkSystemCommandAvailable Passed
  All required system controls are present.
  
  Checking prerequisites 'CheckActiveFilesAndExecutables '...
  PrereqAPI::checkActiveFilesAndExecutables()
  
  Fuser invoking the executable list...
  getCommandInPropertyFiles(): command search 'fusion' in the file properties "properties."
  Path in the real estate records merged: / sbin: / usr/sbin: / usr/local/sbin
  check on "/ sbin/fuser unit.
  found ' / sbin/fuser unit.
  getCommandInPropertyFiles(): command search 'fusion' in the file properties "properties."
  Path in the real estate records merged: / sbin: / usr/sbin: / usr/local/sbin
  check on "/ sbin/fuser unit.
  found ' / sbin/fuser unit.
  
  There is no executable assets.
  PREREQ checkActiveFilesAndExecutables Passed
  None of the executables is active.
  
  Checking prerequisites 'CheckApplicable '...
  PrereqAPI::checkApplicable() check whether each Action is applicable
  PrereqAPI::checkComponents()
  PrereqAPI::checkComponents search required components.
  OracleHomeInventory::haveComponents()
  There are 1 items to check.
  Patch (component to check) Component is "oracle.sysman.console.db", "11.2.0.2.0", required = "true".
  OracleHomeInventory::haveComponents(): installInventory.getCompInvEntries () on 'oracle.sysman.console.db', '1' = homeIndex returns 1 components.
  
  Installed process component 'oracle.sysman.console.db', version '11.2.0.1.0 '.
  Installed control product: name = "oracle.sysman.console.db', version = '11.2.0.1.0'
  Installed Comp > < Patch Comp:
  Installed the Comp Version later than Patch Comp = false
  Installed model can replace Patch Comp = false
  Install the Comp Version is equal to or later than the Comp Patch: fake
  Comp. req. not in the inventory OH: oracle.sysman.console.db, 11.2.0.2.0
  Patch 11879896 : Required or missing components: [oracle.sysman.console.db, 11.2.0.2.0]
  PrereqAPI::checkComponents search option components.
  OracleHomeInventory::haveComponents()
  OracleHomeInventory::haveComponents() Gets an empty list. Nothing to do, returns a list return empty.
  The prerequisite checking 'CheckApplicable' failed.
  The details are:
  Patch 11879896 : Required or missing components: [oracle.sysman.console.db, 11.2.0.2.0]
  System intact, OPatch will not attempt to restore the system
  Locker: release()
  OUISessionManager::unRegister()
  Registration not calling: OPatch
  Locker: release() removes /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_locked
  Locker: release() creates /u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_free
  Cleaning of the directory: ' / u01/app/oracle/product/11.2.0/home11gR2/.patch_storage/patch_unzip '...
  
  OPatch failed with the error code 74

  Well its quite obvious, isn't?

  Check installed product: name="oracle.sysman.console.db", ver="11.2.0.1.0"
  ...
  Patch 11879896: Required component(s) missing : [ oracle.sysman.console.db, 11.2.0.2.0 ]
  

  11.2.0.1 vs 11.2.0.2

• Cannot convert win2k server - fails with the boot.ini on the version 3 and 4 error!

  Hello

  I am trying to convert an old win 2000 Server on an esx server, and I'm having a little trouble.  I am trying to run the converter and version 3 already tried with no luck.  On version 3, it manages at the end, think 97% I think and fails.  When I look in the logs of the converter, it seems to resemble a mistake with the boot.ini file.  I left the server for some time and today I have just spotted that the new version of the converter is out and although I'd give it a try.

  Unfortunately, I will have a chance to convert the server again.  It is not the last step.  Ive joined the output of the converter v4 logs.

  Here are the contents of the boot.ini file:

  boot loader

  Timeout = 0

  default = multi (0) disk (0) rdisk (0) partition (2) \WINNT

  "multi (0) disk (0) rdisk (0) partition (2) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  I would appreciate any advice or tips that I've been struggling with this and I have to get the server took off the old hardware that crack, on which it is running.

  Thanks, much appreciated

  "multi (0) disk (0) rdisk (0) partition (1) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  Error 1450 (hive loading error: insufficient system resources exist to complete the requested service (1450)) temporary loading hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE under the name of the mntApi181664643429986496 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE, error 0x5aa.

  23202 error when you open the software hive

  Cannot read the news of the OS on the system disk: 23202

  You must increase the size limit of the registry on the source. For more details, see: Conversion failed with 1450 PlatformError under Windows 2000 or NT (1005979).

  Please award points if that's the right answer.

• Exit 11 topic: config fails with the error analysis

  No problem after installing version 11 until they tried to use
  Subject: config which failed with the following message.

  XML parsing error: undefined entity
  Location: subject: config
  Line number 59, column 1: key = "& focusFilter.key;" modifiers = "accel" oncommand = "document.getElementById('textbox').focus ();" / > "
  ^

  The problem was caused by Prefsearch addon. I have notified the
  Developer.

• ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  Hi all

  I'm looking for information on the guide follow error

  ORA-27300: OS dependent operating system: CreateThread failed with status: 8

  ORA-27301: OS Error Message: not enough memory is available to process this command.

  ORA-27302: an error occurred at: ssthrddcr

  Thank you
  Waqas

  Please don't be crazy on me, but in my opinion, this is the wrong place for your question. The fact is that Toshiba doesn't support Windows 2003 server for mobile computing. If you have problems try again with Microsoft.
  As a manufacturer of operating system, they should be able to offer an explanation for each error message. Sorry, but I see no connection between the problems described and Toshiba as a hardware manufacturer.

• Firefox install fails with WIN ME

  I tried to install Firefox 3.5 and 8 on a Win ME - both system fail with "Setup causes an error in the Setup program. Firefox 2 was OK. Firefox messages suggest an update is necessary, but I can not because the installation program does not work.
  I also can not provide FEEDBACK - because it suggests, I need "Last version" which I can't install "simply" as it says on the feedback page. It's a probplem with ME - like the other browsers like IE and Chrome latest versions do not appear to it either... am I stuck with older versions?

  You can try KernelEx for versions of Firefox 3 + to work, but they might be very slow with an old PC less 750 Mhz and RAM.

  http://sourceforge.NET/projects/kernelex/

• Can't do dmg file in the folder - "operation failed with status 1"

  I have a 1 TB hard that often went around. There are some personal files here although I am trying lock creating a DMG using disk utility and turning on encryption. However, whenever I try to do that, I always get an error code - status 1 to be exact. Note that it only does on some records. I had about 15 cases work this way with success, but I get this error a LOT... probably about 40% of the time. "Whenever I try too search ' operation failed with status 1," nothing appears! So frustrating! Any help at all is greatly appreciated! Please see the photos to see more. Thank you! Information... Files in JPEG areinformation1st picture2nd photophoto 3

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray