JQuery plugin for before and after the cursor

Similar Questions

• I'd like to produce consistent spacing before and after the section headings in the table of contents

  Hello

  I am trying to create a style for the entries of table of contents for the titles of the books section. I would have a little more vertical space between these securities and two other section titles or sub-section titles, like so:

  Section 1

  Paragraph 1 a

  Paragraph 1(b)

  Section 2

  Section 3

  and so on. To do this, I can easily add a space before and after the space for the section title style. The problem comes when there are two titles with no intermediaries paragraphs, such as 2 and 3 in the example above. Then, the space between these titles is double. If I set is a nonzero value space before or after the space, but not both, then the titles won't be correctly spaced in areas where it has paragraphs either below or above a section title. Does anyone know how to get a uniform spacing?

  Thanks in advance for any advice!

  Make a third style for the case where there are two titles of section together.

• By comparing the photos before and after the adjustments

  Hi all

  I'm about to go through the Canon DPP to Camera RAW software.

  In DPP, it is possible to divide opinion in order to compare the same RAW image with different adjustments. This possibility is very valuable to me.

  Is it possible to split view in Camera RAW?

  If this is not the case, how can you compare the original image with that you get after doing the settings?

  Thank you for your replies,

  Cédric

  Each adjustment Panel in ACR has of a preview box you can check or uncheck to display the settings in this Panel.

  Alternatively, you can simply switch the 'p' button to see the difference in your image before and after the adjustments. But in both cases, this before/after comparison is limired for adjustments that are made only in the Panel in which you are currently working.

  However, if you switch to the Panel settings predefined and toggle the 'p' button, this will show you the difference between the image that it was initially opened in ACR and after all adjustments in all panels.

• Can we call a method before and after the operations of export in ADF 11 g

  Hello
  My problem is that I have to run a method before and after the export operation. Is this posible in ADF 11 g
  
  Kind regards
  Felix

  Hello

  in response to a post of similatr of yours, I said

  1 drop af:exportCollectionActionListener on a command button
  2. set the control knob to display = false
  3. in your Java code, call

  ActionEvent ae = new ActionEvent (button);
  AE.queue ();

  Everything you put in front

  ActionEvent ae = new ActionEvent (button);
  AE.queue ();

  will be like a before trigger fires, everything that follows as a trigger of post

  Frank

• GREP: How is it possible to place a (for example) "*" before and after the text in bold with GREP?

  Hello.

  I have a string of text as such:

  

  I want to use GREP to insert a "*" (asterisk) before and after each "BOLD" part. I can do it with GREP?

  (if the asterisk is a problem, I can use a different character)

  Any help would be appreciated.

  Hi Schmaltzkopf,

  Try this:

  

  Have fun

• Before and after the Question

  Why do the front and after the opinion does not seem to take into account the cropping?  The only way I can see my version of before harvest is to reset the input image.  I would like the picture to the file of origin before and the after version after all edits including crops.  Any suggestions on how to do it?

  I am happy that before / after does not remove the culture so that I can zoom/drag on the same area and have the same point of view.  I proposed that there is a switch on the crop tool similar to the rest of the panels and tools that allows you to turn in culture on and outside.  It seems to be the only one who did not.  This is particularly useful when you perform tasks when the spot source out of the cropped area and you want to adjust.  Its probably a design decision because I think many of the cursor are fit and are biased to the data in the cropped part of the picture.

• Before and after the split-screen view

  Its possible for itself before and after without split-screen? Just pass before and after.

  Not to be confused with the key slash?

• How to prune a white space before and after the bookmarks?

  Hello

  I hope that someone can help me with some JavaScript to remove the spaces before and after my favorites. I know I have to use regular expressions which I think would be ^ [\t]+| [\t]+$ and I also found a code on the internet but it is related to not favorite channels.] How would change this code work for bookmarks? Thank you.

  // Trim
  function trim(stringToTrim){
  return stringToTrim.replace(/^\s+|\s+$/g,””);
  }
  

  First of all, for this code to work, you must use standard double quotes, not the ones you currently have it.

  For use on a bookmark, you can do something like this:

  var bkm = this.bookmarkRoot.children[0];
  bkm.name = trim(bkm.name);
  

• before and after the shows difference in white balance even if the photo is not published

  My present Lightroom (white balance) differences between before and after images of the same file, even when the image was published not (the front of the image seems greener). I already checked my import settings and there is no editing during import. The two images, before and after should look exactly the same, but they don t. I have amd using a PC and my files is Nikon Raw or jpeg, it is not serious, the same product no matter the file type.

  

  This is probably due to a faulty monitor profile.

  Windows 10 is known to install the manufacturer profiles, which are often of poor quality.

  Troubleshooting, as well as a temporary fix, try to set the monitor to sRGB profile.

  I have this solves the problem, ideally you should calibrate your monitor with a standard material.

  Press the Windows key + R, type colorcpland press ENTER.

  Add the sRGB profile, and then set as default profile. See screenshot (from Windows 7) below.

  

• Before and after the problem - Module Development - Windows 7, 64-bit - Lightroom CC v. 2015.5 - camera raw 9.5

  I use Windows 7 64-bit, Lightroom CC 2015.5 Camera Raw 9.5 and the module development on a feature photo ' before and after ' does not work.

  He shows me the image changed, but not the original (I don't know exactly what another image "edited", it shows me).

  In the screen shot, you can see the pictures "before and after" and the one original overxposed.

  I hope I am clear enough.

  Any suggestion?

  

  Thank you :-)

  Click with the RIGHT button ON the import step in HISTORY (do click NOT just what this will change your photo AFTER) and select "copy history step settings to before.

  "

• OIM11g: Event Notification, before and after the data elements

  Hello
  
  I have several notification events currently working properly. I would, however, create a new event notification containing the front and after the a modified attribute value.
  
  For example: If the user's e-mail address changes, the notification should be similar to:
  
  It is a notification that your email address has been updated correctly in the system. Old value: [email protected] new value: [email protected].
  
  Notifications appear to not be pulled as handlers process events, process tasks and scheduled tasks, is it possible to have both the front and after the data sets available for notification of each of these tasks?
  
  Thank you.

  If it's on a field of the user object, you can check if the attribute you are looking at is contained in the orchestration.getParameters (). If it is found, you can remove the old value out of the following:

  HashMap eventDataHashMap = orchestration.getInterEventData ();
  Identity currentUserState = eventDataHashMap.get ("CURRENT_USER") (identity);

  Then you can generate the notification by email/but you want to.

  -Kevin

• Java plugin for Oracle hangs after the last update

  As part of the requirement of the Oracle, we run JRE 1.7.60
  To update firefox this morning and now the plugin is constantly crashing.

  Hello

  Thanks for your reply, but I doubt that flash player is related to do with Java.

  And the Java applet crashing in my browser, I guess, should not be linked to my graphics driver, especially since the only update that took place was an update of firefox.

  In any case, Firefox for some reason any launches 2 additional tabs when executing the Java Applet (IE does not work). In the past, I'm used to close the first tab, since it contains nothing except an Oracle logo.
  However, it seems that after the last update of firefox, if this tab is closed, it cause Java to crash.

  Therefore, do not close the additional tabs by the Java Applet. However, this has never happened before, do not know what has changed in the latest version of Firefox to make it happen now?

  Thank you

• El Capitan sign of a sudden in the last days (before and after the upgrade to 10.11.4 too)

  Hello

  El Capitan signed all of a sudden and then requires the password, it occurs usually once a day. This problem started last weekend before spent 10.11.4 and remained after the upgrade).

  I noticed that this happens usually when I play videos with VLC's .flv and the system is unable to show that the video itself only plays the sound, and after a few minutes that she signed all of a sudden. (I have a MacBook Pro (15-inch, mid-2015, retina, 2.5 GHz Intel Core i7))

  You have noticed the same problem?

  I'm looking forward to your kind help, thanks in advance!

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process (WindowServer or loginwindow).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Save the data before and after the occurrence of a Trigger Condition.

  Hello

  I am worrking on an application that acquires data from 64 channels and performs many analyses.

  Necessary to implement something is recording the data in the event of alarm condition.

  I've implemented datalogging in many previous applications, but this one is difficult.

  I need to save data for a few seconds before and a few seconds after the alarm has occurred in a single file.

  I thought constantly write data to a file PDM and at the same time deleting the old data, until the alarm trigger occurs.

  but I was not able to do, since I have no blocks to remove data from a PDM file.

  I'm looking for the ideal approach to this recording.

  Any help will be appreciated.

  What I have to do this in the past, use of a queue with loss as a circular buffer.  When you get the relaxation, dump you the data in the queue to your file and then save however many data you want after the outbreak.

  For the purposes of the memory allocation, do not use the queue to rinse.  Use rather a Dequeue element inside a conditional FOR loop with a 0 timeout (reading the queue stops when you have a timeout or you read X samples).

• Temporary black screen before and after the connection

  I have a Dell Studio XPS running on Windows 7 Home Premium. Recently, I rebooted it after he was infected by malicious software, but now I'm having problems with a black screen that appears. After the windows logo appears, there is a black screen that shows about 20 to 40 seconds. My cursor is visible, I can move it around the screen, and at times, the waiting/loading wheel blue appears. I can connect then wait 40 seconds and my computer seems fine other than that. (Although it seems to take a little longer than expected to load my desktop however). As I mentioned, it started again just so there is no main programs installed that may take a while to load. I used the mode without failure to start my computer and the black screen seems to appear there as well.

  Any help would be greatly appreciated, thank you.

  Hello

  I suggest you to disconnect all external devices and check if that helps.

  Step 1:

  I will suggest you to do material clean boot and check to see if you encounter the same problem.

  a. right-click on computer-> Manage

  b. Hardware tab Device Manager->

  c. right click the sound card, video card and NIC, one by one, and then click on turn off

  d. restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

  Step 2:

  After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.