June-July 2013 video Assembly Hard Drive Configuration - ideas welcome!

Similar Questions

• Tecra M3 balck screen external TV Watch DVD or video to HARD drive

  I have a Tecra M3, being older, I have the device plugged into the widescreen TV.
  It is fine until I want to watch a DVD or video file.

  I get the office and the outline of the Media Player or Real Player but no video, just a black section on the screen where the DVD should be.

  However the video played on the laptop normally.
  Also how to get the equipment in place the program, is on the Panel, but clicking on it does nothing?

  Any help for this old ghostiano welcome

  Hello

  I had a similar problem and I could solve it.
  I tried to watch a DVD on the TV by using software WinDVD one always got a black screen on TV.

  You must appear FIRST on television; Don t start the applications DVD before you didn't switch to the TV. After the display has been set at the TV, you can start the DVD or movie from the HARD drive.

  Welcome them

• Optimal hard drive configuration for first Pro CS5 and Pro Tools

  I am in the process of upgrading a workstation is used mainly for multi-track audio recording in Pro Tools using the Adobe CS5 products following production of promotional videos in HDV (AVCHD for the web) as well as printouts of documents of marketing for groups and musicians: Premiere Pro, Photoshop, Illustrator, and Soundbooth.

  Since Premiere Pro is probably the most demanding application in the group, I studied the hardware configurations suggested on this forum with great interest, in particular the suggestions of PREJUDICE (including its generic guidance for the installation disc) to determine what drives in order to buy and the best way to configure them.

  I'm upgrading to a HP Z800 with 2.44 GhZ processors dual quad core with hyperthreading (16 virtual cores), 12 GB of memory and a GeForce GTX 470 overclockee.  Without the implementation of a RAID configuration (which I can't afford right now), I would use 4 bays for HARD drives available in the Z800 in the optimal way for the Premier Pro, using currently available drives.  Currently, I plan to buy a 300 GB VelociRaptor to use as my C drive because of the time of extended loading and demands placed on the disc of ProTools and plug-ins Waves associated.

  I would appreciate your suggestions to improve my next plan: C (300 GB WD VelociRaptor) for the operating system and programs; D (1 TB WD Black Caviar) media and projects; E (1 250 GB WD Caviar Black) for the swap file (approx. 18 GB) and media Cache; and E (2 TB WD Caviar Black) for Pro Tools, exports, and previews of audio files.

  I have great respect for the knowledge of the members of this forum and look forward to your suggestions.

  / Bill

  Bill,

  If the live band shots involve a lot of multi-camera editing, I suggest a raid0, otherwise, if the Assembly is a single camera only, I would use separate disks, one for the media and for exports. The risk of losing all the data in a raid0 configuration would not bother, because the intensive part of the disc reads media / FLV writes. It will not be a significant difference in performance between playback of a disc and writing to each other compared to R/W in a raid0.

• HP Pavilion s5570t desktop computer: single SATA hard drive configured as RAID in BIOS

  Our small computer lab has two offices of Pavilion Slimline s5570t that we have recently upgraded to Windows 10. I noticed that in the configuration of the BIOS for the SATA hard drive, it is defined as RAID. I don't know why. The thing that brought this to my attention, is that the software Intel Rapid storage technology constantly shows about 25% CPU use and there high usage of the disk when computers start first which makes them unusable until the software installs.

  My question is can I change the setting of the BIOS SATA AHCI with no problems and that will solve the problem? The Intel rapid storage technology software version is v9.5.7.1002. It is obviously old and I could update, but I wonder if the real issue is the BIOS setting.

  Thank you

  JohnD

  Thank you for the additional information.

  I'm not sure it tells you, but I changed these settings without having to reinstall the operating system.  I suppose it could be correct.

• (Redirected) T5810/hard drive Configuration Options

  Does anyone know the configuration specific to the hard drive bays T5810 with respect to the total capacity of the disks 2.5 and 3.5? Sale and manual doc is a bit ambiguous.  Plan would be to order with a G 256 SSD as boot drive, then add an additional 480 G SSD, plus 1-2 3.5 "drives of the machine spinning it would replace.  What I think, based on what I see, is the berries can accommodate up to 4 drives, either 2.5 or 3.5, but the specs say 2 3.5 drive bays only... It seems that one of the optical bays can maintain disks 3.5 or 2.5 (possibly with an optional adapter, I see not listed).  There are enough connectors SATA on the MB, and I'm not going to add a hardware RAID card.

  Also, if ordered with 1 single drive, the SATA and present for the full expansion of power connectors?  The configuration in order to specify a configuration of hard disk without also ordering the hard drives as well, that won't be necessary in my case.

  Thanks in advance.

  Thanks in advance...

  Hi snoylekim8,

  Please repost this in the forum faster assistance office.

  http://en.community.Dell.com/support-forums/desktop/

• Please help me to adjust my current HARD drive configuration

  I posted this at the end of 'Guidelines for best record Setup' badly yesterday, but I think that the thread can be so long and so old my question is simply lost in the mix, so I'll go ahead and create a new post here.

  I read damage on the guidelines for the best drive configuration and its position during the installation of overhead storage for editing systems, and I have a few questions...

  First of all, I have a TON of data, much of that which I could probably check on own things upward. Here's what I have right now, and maybe you can give me some recommendations to fix things so it'll work better (my PPBM5 shows significant slowdown in the disc-land). FWIW, all internal hard drives are 7200 RPM SATA2.

  I have a WD 250 GB enterprise storage disk for my OS/programs, and I think it contains the swap file... (although I have 12 GB of Ram, so I don't know how many times it is used). This one is full of about 50%.

  I have a WD 500 GB enterprise storage drive that contains all of my graphics, photos and audio, as well as other generic data files (think documents, PDFs, etc here) it is about 60% full.

  I have a 1.0 TB WD Caviar Black for my projects/Scratch/Previews drive. This one is full of about 40%.

  I have a 2 TB RAID - 0 (from WD Enterprise storage drives 2 x 1.0TB) which contains all my data in whatever format it is arrived (most are direct capture of HDV in the first, but there is a good mix of AVCHD, R3D and various SD stuff, too). This one is full of about 95 percent.

  I also have a backup of RAID-0 WD 4TB drive which is a little over 50% full and keeps a backup complete of all the drives in my system, less the OS and programs. (FW800)

  Then I have a second drive 2 TB of single disc that I use to maintain an offsite backup of whatever I am working on projects, more important things like photos and graphics. This one is full of about 30%. (FW800)

  Then I have a third disk single disk of 1 TB, which is a general backup drive and usually remains in place and is about 80% full. (USB 2.0).

  OK, so it's where things are now. From what I read, I think I might be better off by doing the following:

  250GB for OS/programs

  500 GB for the previews/Scratch/pagefile

  3 x 1.0 to drives (non-RAID) for my projects/media OR 1.0 TB RAID3/5 for projects/media (but I'll have to find a way to archive a bunch of stuff... BluRay?)

  I've got room in my system of adding a player more and I can probably get the approval for the purchase of a disk more if I asked my boss - so if I got a 2 TB drive, I could do a 2.0 TB RAID by using two TB 1.0 discs for interlacing and the 2 TB for parity, leaving me with an extra 1.0 TB? Or should I get a disk 1 to and a 2.0 to Raid with two disks of intertwining and two for parity? I'm really not upward on things like RAID, despite reading your article on Wiki and he...

  Also, I could separate my current RAID-0 and not lose the data on it?

  Just FYI, I use RAID on Board (using the motherboard ASUS P6T6 Server) and the purchase of a RAID controller is out of the question right now...

  I edit mainly HDV/AVCHD, but I have a little RED 4 k, and I'm hoping to upgrade my HDV for the JVC GY-HM700 camera soon.

  Thanks for your advice and your expertise!

  David

  Thank you, David, which makes it much clearer. At least a lot more understandable for my mind tired now.

  Given your options (no controller raid separated, possibly one or even two additional discs), I would go for this configuration:

  C: 250 G OS & programs

  D: project photos/graphics/audio-only 500 G, using Audacity / other documents & Pagefile

  E: 1 TB projects and outputs & media Cache

  F: 3 x 1 TB Raid0 for media and previews

  The reasoning is that currently you run lack of space on your 2 drive raid0, when editing your access to current content on D will be rather small, so move your swap file can be attractive and by using the E drive for media cache, next to projects you split the load between E and F. Your drive F is growing in quality and will be faster and backups are supported with the 4 TB and off site of 2 TB drives.

• Hard Drive configuration for CS5 master collection

  Dear all,

  I'm looking for advice on what drive configuration to use. I'm currently reformatting all readers for a new installation of cs5 and I have the following readers:

  1 WD Raptor 10000 RPM 150gig

  2 WD Raptor 10000 RPM 300gig

  3 Seagate 7200 rpm - 1.5 to

  4 Seagate 7200 rpm - 1.5 to

  I have read the various messages of forum, but need some clarification on what to install on this disk

  I have Windows 7 Ultimate 64 - bit with 6 gig memory and i7 processor

  I guess windows is best installed on one of the fastest WD drives. and my video projects on seagate drives.

  Where program cs5 files should be?

  I have raid options, but do not know a lot about the best set upward

  All welcome, advice would try to do things first!

  Concerning

  Chris Anderson

  Too bad to read on the http://forums.adobe.com/thread/662972?tstart=0 installation drive
  -Click on the image embedded in the message of prejudice to enlarge it to the size of reading

  Windows and all software on the startup disk

  #2 = Windows swap file disk

  Reader #3 = organization project files

  #4 player = video files

  HOWEVER, certain types of HD files work better via RAID because of the speed of data transfer requiement... but I edit AVCHD without raid, because it is more intensive CPU intensive disk

  You need to validate the type of the files you will use for someone to give advice on RAID or not

• Hard drive is IDE mode AHCI mode or during installation

  I have a SATA hard drive and I don't know if it has been set to IDE mode AHCI mode or during the installation of Windows XP.  I bought a new motherboard and when I connect it to the hard drive I get the fault of starting system if my hard drive is set to IDE mode as my motherboard is set to AHCI mode.  How will I know if my hard drive is set to IDE or AHCI mode?

  You can read this break new P67 chipset: http://www.pagestart.com/

  Also: http://social.answers.microsoft.com/Forums/en-US/w7install/thread/22704fcf-32db-4ae4-b969-21ba1f40043b

  First thing is to contact ASUS motherboard potential recall.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• How can I change my hard drives from IDE to AHCI in windows 7?

  Made me change in the BIOS but Windows 7 just gives the blue screen at startup.   Tried to boot from my Windows disk and run the Startup Repair.  Without success.   Windows could not do the repair.  Must return the BIOS IDE mode for readers.

  I have under5stand I have to AHCI to add any player to solid state.

  The material is as follows:

  Card mother Gigabyte GA-890GPA-UD3H, AMD Phenom II 965 6 GB DDR3 memory processor. Western Digital hard drive 1 TB, 1 TB hard drive SATA2 Baracuda SATA3.

  Appreciate any suggestions.

  See http://support.microsoft.com/kb/922976.

  The Msahci in Windows 7 driver is disabled if the initial installation was performed with the value native IDE BIOS. The Msahci driver must be enabled before changing the boot drive SATA/RAID mode.

• My computer has / had a hard drive of 250 GB in there, and after that I ran a full system back to factory settings restore it now appears as a 110 GB hard drive any idea why or how to fix this problem?

  My computer is running Windows Vista Home Premium Service Pack 2.

  I also checked in disk management and there are only two drive a C(110 GB) and D (15 GB) why so the other disappear from 125 GB and how to bring them back. This is something I have encountered when working with computers. Help, please!

  Thanks in advance.

  • What is the number and the model of the computer?

  Because you have restored to factory settings, you will need to contact the OEM (computer manufacturer) for assistance.

  Get in touch with them.

  Dell support

  HP support

  Acer support

  Lenovo support

  Support for Sony

  Toshiba support

• Conversion of Raid 1 configuration to 1 normal hard drive with Windows XP Professional

  I have a Dell Precision Workstation 380, which has been set up at the factory in Raid 1 with 2 Seagate 160 GB hard drives.  The operating system is Windows XP Professional.  I would like to delete the Raid 1 configuration and that the computer is a normal hard drive configuration 1.  Can someone help me with a step by step procedure to achieve this?

  Hi cbcenterplus,

  RAID 1 means that you essentially two drives separated with identical information. In order to break the RAID is simple. Start on the Intel RAID Option Rom utility (ctrl + I), replace two disks drives non-members, and then restart your computer.  The 2nd disc will receive a new drive letter, and you can get in shape by using the disk management and have extra space.

• Portege 7010CT - no hard drive recognized

  Hi all

  I have a Portege 7010CT, I want to use to drive my modeltrain, because it has a RS-232 connection. The problem is however it doesnot recognize the hard drive more. I bought a new one that works fine in another laptop but when I put it in Portege said with the installation of Windows that no hard drive is detected.

  Looking in the Bios, it also says that no hard drive is configured. I can't however in the Bios to change this. East - auto detection? What can I do to make the Portege recognize the hard drive? Thanks for help.

  Greetings Willem

  Hey, Willem.

  As far as I know this old notebook used hard drives with IDE interface. Normally, on all hard drives with this interface, you have a rider where you can switch between Master, Slave and Cable Select.

  I recommend you to check this. Set the switch to Master and try again.

• Easy to replace hard drive myself?

  Is it easy for the average Jane like me to buy a new hard drive and replace it by myself after an online video?   or, should I have an expert (in a store) to replace me?

  I know almost nothing about the hardware of the computer.  But I am a quick learner and am aware of some videoes DIY hard drive replacement on You Tube.  I was told that the only thing I need is the size of my hard drive and SATA III is the new version.  I want a cheap solution, but I also want to avoid future problems more.

  Some information about my computer problem: everytime I turn on my computer, it displays a message indicating the hard disk failure is imminent and suggested me to replace it.  I have already backed up all my data and tried to restore the computer to factory settings, but the same message appears.  So far, I have been pressing F2 and can continue to use my withou computer no problems so far.  But I'm determined to change my hard drive to avoid the problems that arise in the future.  After all, the computer has been used for about 5 years.  Also, I use a Presario SR5838HK PC.

  Help, please!  1 million thanks!

  It is made easy for anyone to replace the hard drive and RAM. As you said, you can follow HP on Youtube videos or if you open the computer, you will find instructions arrows to replace. Make sure that the HARD drive you buy is compatible with your computer.

• I need help finding this hard drive HP

  I'll try to find a second hard drive corresponding to buy for my laptop but I can't find it on the hp website. I have not spent one hour and no luck, geese. in any case, my laptop computer and a hard drive is:

  HP dv7-6c95dx

  750 GB HDD at 5400 RPM with HP ProtectSmart hard drive Protection

  I want to get another hard drive, exactly like the one above, so the two hard drives are a matching pair.

  Then I have to find the special cable for it, yes an another headache. any help would be a great guy, thank you...

  Maintenance & Service dv7 notebook guidehas the information you need. See the list of parts shown for the part number.

  From the Manual:

  Supports the following double hard drive
  configurations:
  ● 2 TB: (1 TB, 5400 RPM, 12.5 mm × 2)
  ● 1500 GB: (750 GB, 7200 RPM, 9.5 mm × 2)
  ● 1500 GB: (750 GB, 5400 RPM, 9.5 mm × 2)
  ● 1 TB: (500 GB, 5400 RPM, 9.5 mm × 2)

  Hard drive (2, 2.5-inch, SATA, does not include support, connection cable, Shield of Mylar or screw):

  1 TB 5400 RPM, 12.7 mm 638974-001
  750 GB, 7200 RPM, 9.5 mm 633252-001
  750 GB, 5400 RPM, 9.5 mm 634250-001
  640 GB, 5400 RPM, 9.5 mm 603785-001
  500 GB, 7200 RPM, 9.5 mm 608218-001
  500 GB, 5400 RPM, 9.5 mm 634932-001
  320 GB, 7200 RPM, 9.5 mm 634862-001
  320 GB, 5400 RPM, 9.5 mm 622643-001

  Hard disk hardware kit (not shown, includes support, connector cable, Mylar)
  Shield and screws) 665597-001

  You can order parts by parts HP online store. You can save some money by ordering identical pieces from another provider online.

• Test of running-in: hard drive short DST: FAILURE

  Hello world

  The laptop is a HP ENVY 4-1258sr Ultrabook and failed the Test of running-in.

  

  If I start the laptop computer West this defect report:

  

  I think that the hard drive has failed or? Unfortunately security is outdated. The data on the hard drive can be saved? I would be very grateful for the help!

  The data from the laptop:

  Series: [personal information]

  Product: D6W80EA #ACB

  Model: 4-1257sr

  Thank you!

  Markus

  The following indicates the type and the physical configuration of the hard drive.

  HARD drive configurations (7mm SATA 2.5 "):

  The hard disk must be at least 320 GB.

  None of the SATA drives on Newegg the following webpage will be enough.

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&IsNodeId=1&N=100007605%20600030595%20600030592%20600030604%20600003490%204814%20600458205