just checked iTunes all the songs I had unchecked. No idea how I can prevent this from happening again in the future?

Similar Questions

• Computer has recently been corrected it now say windows is not genuine, go online to solve the problem. Windows validation does not any ideas how I can fix this

  Computer has recently been corrected it now say windows is not genuine, go online to solve the problem.  Windows validation does not any ideas how I can fix this

  Visit: http://www.microsoft.com/genuine/diag/> and click on "start the Diagnostics.

  IMPORTANT -online if you run Windows 7 or Vista 64-bit, you must Access the site via IE 32 bits only!]

  `~`

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx>

  `~`

  If you are still not able to validate your Vista installation, follow these steps:

  I. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062>

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  II. after running the tool, click on the button continue, and then click the copy button (to the Clipboard).

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  III. start a new thread in the following Microsoft Genuine Advantage forum and paste the results of the diagnosis of MGA tool in your post, and a clear description of your problem:

  >>

  >

  IV. A help desk specialist will analyze the data and recommend an appropriate solution.

  UTC/GMT is 21:28 Friday, December 2, 2011

• My computer has happened in a power safe mode and I cannot restore without rebooting. How can I prevent this from happening on the Vista operating system?

  My computer suddenly goes into safe mode of power and I am not able to restore in normal mode without rebooting the computer. How can I stop this from happening? My OS is Windows Vista Ultimate 64-bit.

  Thank you

  JO Ann

  Hello

  You should be able to solve this problem by activating the mode Hibernate in the command prompt. If she hibernates, it will save an image where you are on your hard drive and you will be in business once the power returns.
  You must also make sure that your power options would spend in hibernation mode when the power is lower at some point.
  1. Click Start and type 'CMD '.
  2. Right click on CMD and run as administrator.
  3. Click on continue when you are prompted.
  4. "Type in the command prompt" "" powercfg.exe /Hibernate on.
  5. Go to the options to be able to enter the control panel by typing in "Power Options."
  6. You will see the different power options. The one you have selected, that's what you are currently using. Click on "change plan settings".
  7. Click on "change power avancΘs."
  8. Scroll down to the battery and you will see the options of low battery and critical battery responses. Make sure they are set for the hibernation.

  I hope that after these steps, your problems. Please let me know if you have any questions.

• The TrustedInstaller user took possession of most of my WINDOWS files! How to restore my computer and how to prevent this from happening?

  I noticed that the user TrustedInstaller took possession of my PC. He is the owner of most of my Windows files. How to restart my computer and how

  prevent this happening again?

  I know that I can change of ownership and then each individual file permissions, but it would take two days or something, I can stop this in a simple way or how do I restart my computer?

  This user is logged on to Microsoft? I mean if this is the case, then I guess I don't have to worry?

  I would appreciate an answer so =)

  This is how it is supposed to be.

  TrustedInstaller is a built-in account that allows to modify Windows itself, for example during the installation of the updates.

  This is to prevent the Windows system files or inadvertently or maliciously crushed.

• My computer says that the battery is "plugged not charging" I just got a new. Any ideas how I can solve this problem?

  My computer says ' plugged not supported "I just got a new battery... How can I fix?

  Hello

  You should really be asking in the forums for your version of Windows. Click on the
  Appropriate forum in the Menu bar under the Logo of answers on the upper left on
  This or any page.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ---------------------------------------------------------------------------------------------------------------------

  Are you sure that the battery is compatible with your system?

  References to Vista also apply to Windows 7.

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  =================================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =================================================================

  Other information that might help:

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

  Battery saver
  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  What is the precise the battery meter?
  http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter

  ============================================================

  Try this - to make a Restore Point

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
  who will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

• When you select the print document, a box comes up to save the document as. How can I prevent this from happening every time?

  I want just the print page, will not record to it anywhere.

  I hope it's just a setting. I can't find to fix on my own. Thank you for your help.

  Sandy

  Depending on your printer, there may be a checkbox in the print dialog box to "print to file". Make sure the box is unchecked.

• my selection panel collapses with each change or adjustment - even though I have the item selected in the code - how do I keep this from happening?

  I first choose the relevant source in the code, and open it in the area of the selector Panel of CSS designer.  But once I try to make changes the selection panel collapses and turns off after the first change.  So, I have to select the source in the Sources pane again, reselect in the Panel of selectors and making another change. And so on...  What I am doing wrong?

  Mine doesn't show anything in the CSS designer panel when I make a selection in Code Vew. It will appear only the css defined for a given element, if I select this element in Design view first. If I navigate using the Windows Sources and selectors sub in the Panel CSS Designer itself, it works the same in both. I almost never use it but it does not have what you have explained in my version of CBWMS, so I would say that you have a slight corruption in the program.

  That is, does make a difference if you have the Live View running or not?

  You might try to clear the configuration cache/program staff record: removing a corrupt cache file

  Or restore preferences if the cache does not do the trick: restore preferences | Dreamweaver CS4, CS5, CS6, CS5.5http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html

• my computer keep updateing the same ie kb2789643 as well as other updates how to stop this from happening.

  my computer Dungeon set to day the same updates ie kb2789643 as well as others, how can I prevent this from happening. I did it for the last four days, the center of update of windows has installed to them all, but more and more again please help me what should I do to stop this?

  Hello

  Thank you for keeping us posted.

  It seems that the update of .NET Framework is getting damaged.

  You can download the .NET Framework repair tool and check.

  Reference:

  Microsoft .NET Framework repair tool

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  Hope this information helps.

• I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  I used him copy / paste to add several checkboxes on my form, but now in preview mode when I check the first box it automatically checks all the boxes.  How can I stop this from happening?

  For later use, it happened because your fields have the same field name, and fields with the same name automatically have the same value.

  So all you had to do was so each had a unique name and it would have worked, but using the command create several fields is preferable because it renames the fields for rename you them.

• One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is in Chrome and do not hap

  One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?

  Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.

• How to check that all the options enabled in Oracle Database EE

  Hello
  
  I'm new on OTN.
  
  How to check that all the options enabled in Oracle Database EE?
  
  Thank you
  Vincent

  Hello

  Select decode(detected_usages,0,2,1) nop,
  name, version, detected_usages, currently_used,
  to_char(first_usage_date,'DD/mm/YYYY') first_usage_date,
  to_char(last_usage_date,'DD/mm/YYYY') last_usage_date
  of dba_feature_usage_statistics
  order by nop, 1, 2
  Or

  v$ option view

  Thank you
  LaserSoft

• I have problems to install the Microsoft 2007 12 updates. They all invariably fail with the following message details: ___Error error: Code 8007006E___Any ideas on how I can fix this? ___I have Microsoft Vista.

  I have problems to install the Microsoft 2007 12 updates.  They all invariably fail with the following error message:

  Error details: Code 8007006E

  Any ideas on how I can fix this?

  I've got Microsoft Vista.

  Hi 1proudmama
  Welcome to the Microsoft Answers Forum!
  We would like to know are these updates on Office 2007

  I recommend the methods are:
  Method 1:
  Step 1:
  Uninstall the update failed, if she is found in the installed updates, follow these steps
  i. open Control Panel from the start menu
  II. Select programs and features
  III. click Show on the installed update.
  IV. uninstall the update failed
      
  Step 2:
  Reset the component of windows update and then try to install updates, check if the problem is resolved. It has Fix tool link below will help you with the same
  How to reset the Windows Update components: http://support.microsoft.com/kb/971058

  Step 3:
  Install the stand-alone package containing the updates. You can download the stand-alone version of the link with the number of KB below: http://www.microsoft.com/downloads and check if the problem is resolved.

  Method 2:
  Run the SFC (System File Checker) on the computer scan to fix system errors to the file on the computer.
  To run a SFC scan, follow these steps:
  Open an elevated command prompt. To do this,
  i. Click Start,
  II. click principally made programs,
  III. click Accessories, right-click command prompt,
  IV. and then click Run as administrator.
  v. If you are prompted for an administrator password or a confirmation, type the password, or click on allow or continue.
  VI. at the command prompt, type sfc/scannow and press ENTER. Once the scan is complete, restart the computer so that the changes take effect

  Below link for reference: http://support.microsoft.com/kb/936212

  Thank you, and in what concerns:
  Samhrutha G S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  I've recently upgraded to El Capitan - biggest problem is timing removed all the entries in my previous ical. Any ideas how I can track down the file containing these essential documents and install in the new program?

  All calendars are enabled in the sidebar?

• How to hide all the future updates to the Windows Mail Junk e-mail filter?

  Is it possible to automatically hide or ignore all future updates for Windows Mail Junk e-mail filter?

  I don't have, and never plan to use Windows Mail, and I'm not sure that I could never be convinced that I should, someday.

  Therefore, all the updates of Windows for this are very very little, but the update system keeps their important marking - so I have to hide them every time.

  Is there a technique to automatically remove this update until it is important to my system?

  I use Windows Vista Home Basic SP2.

  No, you can not hide all the future updates Windows Mail Junk Email Filter. But here is a workaround:

  1 configure automatic updates for the 'updates but let me choose... '. "setting.

  2. when an update of the Windows Mail Junk e-mail filter is available for your approval, thereafter, hide it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When I use dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  When I use Dreamweaver cs6 browser Checker to find pages, it creates another page starting with the letter T. And he added this page to my folder. How can I prevent that from happening. I use a Mac.

  Are you spotted with temporary files?  In Edition > Preferences > Preview in browser.

  Nancy O.