OpenGL driver for Toshiba Satellite C660-1J2?

Similar Questions

• Need help to find the driver for my Satellite C660 WLAN - 1 H 6

  I can't find this software please help.

  Atheros AR5B95 LAN wireless 802.11 a/b/g/n controller

  This is a laptop: Toshiba Satellite C660 - 1 h 6

  Hello

  All WLAN drivers, you can find and download from the Toshiba WLAN http://aps2.toshiba-tro.de/wlan/ Portal

  Simply download and install driver Atheros for operating system you are using.

• Need a driver for TOSHIBA SATELLITE 1620

  Please, I need a drivers for TOSHIBA SATELLITE 1620:
  Video: ATI3D-RAGE LT PRO
  Audio: CIRRUS LOGIC CS4281 AUDIO ACCELERATOR
  modem: ROCKWELL/CONEXANT SOFT MODEM K56

  or the image of the original CD.
  My e-mail is [email protected]

  Thank you

  Hi Milan

  The original CD image can be controlled only by the authorized service partner and cannot be downloaded. Drivers, tools and utilities can be downloaded from the download from Toshiba site.

  Good bye

• Need graphics driver for my Satellite C660 HD

  Can anyone help with a HD graphics driver that works with AutoCAD 14 and more. I have the latest driver for my laptop Toshiba and Intel and just AutoCAD site return to make web sites.

  I3 C660 64 bit, 8 GB of ram windows 7 Intel HD graph version8.15.10.2189

  Screen freezes when loading of Acad.

  Kind regards

  John

  Hello

  Usually the most recent graphics driver Intel HD can be downloaded directly from pilot site Intel.

  The Intel driver depends on the Intel CPU.
  So I wonder what Satellite C660-xxx you exactly and what CPU was installed in the laptop.

  Could you give some details?

• Hard drive for TOSHIBA SATELLITE 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 portable

  But he has only a 10 GB hard drive.

  The BIOS sees a 40 GB, 60 GB, 80 GB or 160 GB HDD?

  Is the IDE?

  Hello

  I doubt you could use bigger hard disks of 128 GB because of the 48-bit LBA.
  The laptop seems to bear an IDE controller but the 48-bit LBA is supported since 2001, defines the ATA-6 Ultra DMA/100 (also called Ultra DMA mode 5 or Ultra-ATA100)

  I think that your IDE controller support 28 bit and that is why you should choose less IDE 2.5 hard drives.

  See you soon

• Ethernet Controller Driver for Toshiba Satellite A205-S4777?

  Hi, I just installed Windows XP to my laptop (Satellite A205-S4777). I have all the drivers, I need except Ethernet controller and co-processor biometric.

  It would be very useful if I'm any help from you.

  Thank you.

  Hello

  Check on this page:

  [Here: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1757710& rpn = PSAF3U & modelFilter = A205-S4777 & SelCategorie = 3 & selFamily = 1073768663]

• How can I get the driver for Toshiba satellite pro M40X VGA

  My venus of toshiba with a Xp operating system I now changed to Windows 7.

  After you install the new windows, I found out today that my VGA is not driven. PLs, how can we drived by my VGA & were I can find it.

  The graphics card in your laptop is an Intel® Extreme Graphics 2, which is not supported by Intel for use with Windows 7. There is nothing you can do to change.

  The best operating system for your laptop is Windows XP...

• Need driver for my Satellite L300-1F8

  Dear Sir

  I need driver for Toshiba Satellite L300-1F8 portable
  I paid without CD Driver
  Please help me ASAP

  Hello

  Your Satellite L300-1F8 belongs to PSLBGE models and all drivers for Windows XP Home edition for your laptop model are available on the Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads.

  Please select your laptop model and all the drivers of Windows XP edition family appears here.
  Can you please let us know what your problem is exactly? I didn t understand what exactly do you mean with CD-driver.

• Satellite C660-1J2 - about speed of Wlan

  Hello
  I have a Satellite C660 1J2
  Win7 Pro 64 bit 8Meg Ram
  Driver Realtek rtl8188ce 19 wifi / 420/1005-2011-20/04/2011

  My setup is a router linksys wrt54gs + wre54g amplifier and the toshiba uses wifi, through the amplifier when I start the tosh every day, the connection is always big 5 bars, but speed is always moving between 18 to 36.

  The amplifier is 3 feet distance and in line of sight. If I push the disconnect and re connect speed to 54 and rest until I have shut the tosh at night.

  I got a sony vaio before and not issue however the wifi card was only the b - g card.

  Is it a no number or you think has something to do with the ariel is a reason for updating the driver in the latest version on the website of Realtek 28/1005-1006-2011?

  If you think an update is guaranteed can you confirm it is correct for my tosh and it says auto install, what I have to do something to install or

  can you suggest anything else.

  It seems as if the tosh cannot see the amplifier and when I do a disconnection and reconnection, he can see the amplifier.

  Thanks for any help

  Tony Miller

  > Is it a no number or you think has something to do with the ariel is a reason for updating the driver in the latest version on the website of Realtek 28/1005-1006-2011?

  I recommend you update the WLan driver if new version is available.
  It is possible that the compatibility between different routers and modems would improve with new version

  However, I also recommend to check the power of Win 7 options and disable WLan Card to save energy.
  This power save can save the battery, but affect the WLan functionality.

• Re: Driver ATI Installationsur Satellite C660 1 - EF

  Greetings!

  I have a problem installing the ATI vga driver. I know that only drivers from the Toshiba site may be used, but they do not work yet. I have a Toshiba Satellite C660 laptop 1 - EF with ATI HD5470 and Windows 7 SP1 x 64 installed. I bought without OS, so I did not all discs.

  After I installed it (clean install) of the OS, I have seen that some devices had been installed with the drivers built into windows (or not yet installed). So I decided to download the proper drivers. The first problem is that I couldn't find the driver ATI for W7 x 64 on the Toshiba site for this type of laptop. I tried to find a similar notebook that has the same graphics card. At least I could find a driver. But when I tried to install it, it was closed. He did nothing, just closed.

  Since then, I've tried several drivers (most of them that I downloaded from the Toshiba site), but the result was the same.

  What should I do?

  Hello

  It's good for Win7 64 bit ATI display driver.
  Can install you it?

• Drive HARD on Satellite C660 failure

  Hello, I have a problem.

  I am owner of laptop Toshiba Satellite C660, I bought it two years ago, but I did not extend my warranty.

  Unfortunately, six months after my warranty expired, my HARD drive failed. One day he started making weird sounds and the computer was not able to start. I find that my HARD drive is broken and I need a new.

  So I ordered a new one, put it in my laptop, installed Windows 7 above (I'm a student and my University give us Windows for free). But there's this problem:

  Resolution of my laptop can be changed to two possible options: 800 x 600 and 1024 x 768. I don't remember what the resolution that I had before, but I'm 100% sure that it was better, and, what is more important, it is 16:9, not 4:3.

  Another problem is that my function key (Fn) are not. So I'm not able to activate my WiFi or Bluetooth, or make my laptop into hibernation.

  Can you help me? What should I do?

  Thank you very much.

  Hello

  At first please be so nice model number and post accurate of your laptop (C660-xxx). I don't know if your laptop comes with preinstalled OS but if yes does I m wondering really you do not have original recovery image.

  In any case, after the new installation of the operating system, you must install all the necessary drivers and tools and utilities.
  Thanks for posting as soon as possible the model number and can check the Toshiba download page and help you install drivers, tools and utilities.

• On Satellite C660-1J2 keyboard problems

  I have 2 laptops from Toshiba, type Satellite C660-1J2 used by 2 different people and we both have the same problem.
  The problem is with typing, many times it jumps a letter and sometimes a letter not to show, and then when you hit it again you get 2 letters and sometimes just get 2 letters to hit once.

  We tested it and it's a real big problem for us, because we use it for school...

  Help us please!

  Update the BIOS this will certainly solve!
  There are a lot of discussions on this issue and the update of the BIOS helped to address this problem.

  In addition, I found this article in the knowledge base:

  + * Keyboard issues with the Satellite and Satellite Pro L670 & C660 series notebooks * +.
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  Welcome to all :)

• How to get on Satellite C660-1J2 factory settings?

  I have the Satellite C660-1J2
  some can tell me how to reset this computer to when we bought at toshiba, does not create a recovery disk, I don't remember how to do it from computer.

  I did once?

  Thanks for the help
  Tony

  Hi Tony

  This should not be so problematic. Start your laptop and the pres F8 several times. When you enter advanced boot options choose option to fix my computer.

  Just follow the menu on the screen.

  More details you can find on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  Good luck.

• Can satellite C660-1J2 - I use a laptop recovery disk

  Is it legal to use another laptop to create a recovery DVD and use it on the laptop of another of the same model.
  Satellite C660 1J2

  Hello

  Purchase of a Toshiba laptop with Windows 7 preinstalled system, you are automatically a Win 7 license.
  For example, you can use this Win 7 on a laptop.

• Problems with hard drive on my satellite C660

  Hi my name is Lisa and I'm new to the forum, I hope that someone can help you. When I turn on my Toshiba Satellite C660 I get a message saying cannot load files with this information...

  File Boot\BCD

  Status-oxcoooooof

  Info - an error has occurred trying to read the boot configuration data of you.

  When he continues to try to load the next message goes something being changed and said something on the hard drive or the CD-ROM drive I think it was the CD-ROM drive even when...

  I'm going to be able to solve this problem or am I likely to replace the hard drive or something...

  Thanks in advance for any help/support and advice xx xx Lisa

  Did you create the recovery disk?
  If yes try to start and check whether the HARD disk access is possible.

  Before you try this BIOS setting defaults.