Just F12 key increases the volume of the speaker?

Similar Questions

• How to make my f1 - f12 keys to the origin function

  My laptop is HP 431. On my keyboard here small image of f1 to f12. example like f5 has a picture of something like "the Earth", this means that if you click on it, it will open the 'internet' browser (for example, google chrome, etc.). Another computer f5 = refresh, but me f5 = open the internet browser. How to transform my f5 refresh like another computer? Clik fn, or what?

  Please answer me, I need your help. I use my f1 - f12 for another program and if I click on f5 it will open the web browser, and I can't play my program...

  There might be an easier way, but it varies depending on the PC manufacturers.

  Press the Windows key and the X key.  This will open the Windows Mobility Center - a utility you will find has been customized by HP.

  They may be provided an entry for "Function key behaviour" which allows to switch between the "multimedia buttons" & "function keys."  Then you might normally have quick access to the uses of these media keys but deliberately off it when you want to use those applications for which it is delicate.

  Similarly, while the keys are defined as multimedia keys, you should be able to press the Fn key with the key F1-12 to make it work like a normal F1-12 key.  And when they are ready to be normal F1-12 function keys, you could press Fn with F1-12 key to make them work as multimedia keys.  In other words, using the Fn key with the key function back everything is set up as its normal behavior.  Again, this varies with PC manufacturers, but is a fairly widespread ability then try to see if it applies to your PC.

• How to increase the speaker volume?

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  On Wednesday, April 10, 2013 23:21:42 + 0000, JRHoot wrote:

  Using Win 7 HP and the speaker volume has been up and is still too low. I used task to the max the speaker icon. Is there another place to perform a volume control?

  Have you set the physical volume on the speakers control
  themselves?

  Ken Blake

• The light yellow on the F12 key when I start my new HP computer

  Original title: not working f12 key...

  Dear Sir, I have purchase new computer hp laptop with OS back free... and I'm upgraded 8 victory... I am facing problem with the key f12... he had a small red light bulb and it is always on... I can't stop it... I do not use conection wifi wifi.disabled... but it does not stop... so please tell what to do now?

  .

  Hello Ben,

  Thank you for visiting Microsoft Community.

  According to the description, I understand that you bought a new HP laptop and Windows 8 is installed. Now when you start your computer the F12 key on the keyboard has a light that turns on automatically even when you are not using a Wi - Fi connection.

  New and most advanced laptops have OneTouch features. The F12 key with a yellow light on computers laptops HP are one of the main OneTouch for Wi - Fi. To turn on Wi - Fi, just press this button and it lights with a white light instead of orange (red) during a Wi - fi is disabled. Also when you turn on Wi - Fi even from network settings this turn key with white light.

  There is no problem with your laptop, it is the functionality of your new computer.

  For more information, you can view a conversation in a HP thread below:

  How can I activate (turn on) on my Envy laptop wireless?

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/how-do-I-enable-turn-on-wireless-on-my-envy-laptop/TD-p/858735

  Hope this information is useful. Feel free to write us again if you have any further questions or for any further assistance with Windows, we will be happy to help you.

• Function keys on the z500

  Hello

  The default behavior of the F1 through F12 keys on the z500 are assigned to the laptop computer functions like mute, turn sound or brightness up and down and so on.

  Is there a way to reverse the way F1, F2... F12 keys work as they work like on any other regular keyboard.

  I use the basic features of the F - keys all the time, when renaming files, research and so on and I want to be able to use them without having to press "fn" every time.

  Thank you!

  
  

• How can I increase the limit of chart bar flash 15 element

  Hi, I created a bar chart flash (with another series displayed in the chart) However, even if the number of items returned by SQL is greater than 15, it shows only the top 15. Is it possible that I can wear it - I tried to change the size of the chart and addition of scroll bars, but who just adjusts - without increasing the number of items.
  
  Thanks much for any help.
  
  Jenni
  
  Published by: Jenni on October 12, 2012 04:09

  Hello

  Edit your table attributes and go change the series in the chart.
  There you should find attribute 'Maximum lines'. Increase this value

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Why the F11 and F12 keys won't adjust the volume?

  I can't adjust the volume with the F11 and F12 keys on my iMac with el capitan.  Can anyone help?

  Thank you very much!

  Make sure that this block is not checked:

  

  If it is not checked, try check it out and then unchecking it.

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• Increase the overall Volume of film

  Hi - I have all audio levels fine for my film, and I want to just increase the overall volume of film. How can I do this? I thought I could use the audio mixer - but I put the top slider - but then it goes down again. I'm new so I don't know how everything works again. Thank you

  Yes, Audio Mixer works best as a monitor of audio mixer level, in my opinion.

  It is designed so that you can control the audio level that you play your movie. But this creates a large number of additional keyframes and can be quite messy.

  The method you use - in the line of scene - is probably the easiest way to increase or decrease the volume of an entire track.

  The best way to resolve the audio for individual items in montage mode is to drag the horizontal line that runs through the clamps upwards or downwards. (There are also more advanced methods, including standardization and keyframes, which I cover in my book.)

  But the key is to watch these counters in the Audio Mixer Panel! You don't want to overload your audio (or underload)!

• T60: Just installed windows, how do I fix my shortcut keys and the blue ThinkVantage button?

  Hi guys

  I just installed Windows Vista on my T60. Now, I have a problem to my keyboard shortcuts work, it's key to 'silent', ' + / volume "and the more important my blue ThinkVantage button.

  I've looked everywhere on lenovo.com, but he can't find anywhere?

  Another problem is that I don't know how to activate my wireless without using the blue ThinkVantage button.

  I had only my T60 for 2 months and don't know much about how it works.

  Help, please...

  Best regards

  I answered your question "in the face".

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• increase the volume creates high reverberation as pitch

  increase the volume creates reverberation as high tone sound, what happened all of a sudden andnothing I actually disappear unless I lower the volume. Windows Vista acer aspire 3680, no problem in three years of use.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  Then:

  Go to the Web site of the manufacturer of your computer laptop/computer/Sound card > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Keys to Smartphones Volume blackBerry playing music move to the next file!

  Has anyone seen this bug Dingo - play a song - you want to increase the volume - but by pressing the volume key moves me to the next song?  A way to solve this problem?

  Thank you.

  Don't holde buttons volume down. Rather give sunrise or volume keys quick click or tap. Hold him will change track.

• If I increase the volume his watch that the volume headphones but I am not connected to the headphones

  If I increase the volume on-screen display this volume headphones but am not connected to the headphones because of this I am unable to hear the caller's voice, how can I solve this problem

  The iPhone thinks there are headphones connected - you probably need to clean your helmet at the bottom of the iPhone.  There are many tips about this on Youtube.

  Clean using compressed air, q - Tip with most of the fuzz removed - do not use metal you can short-circuit the contacts in the port.

  Reboot your phone by pressing on ON / Off switch and also by pressing the Home button until you see the Apple logo reappear.

• When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  When I press the Apple and R keys at the start of my old iMac just boots to the old system rather than start to install new sound system. Help

  Command-r does not work on a 10.6.8 system, you would need 10.7 Lion or better to do. If you try to install a new system and that you have already downloaded, then go to your Applications folder and double-click "install OS X...". »