Problem of Studio - just-in-time debugger Visual

Similar Questions

• Visual studio just-in-time debugger error a WIN32 unhandled EXCEPTION has OCCURRED in EXPLORER. EXE [3167]

  "This exception failed with the following error in the debugger, just-in0time im get an error reading": no installed debugger has just-in-time debugger enabled, then close the windows and restarts when I try to open documents on drive c or when I try to open the files on my external hard drive. MY QUESTION, WHICH I GUESS IS WHERE TO GET A DEBUGGER OR HOW TO FIX THIS ERROR? THANK YOU GUYS

  Hi MICHAEL68VR,
   
  Follow the suggestion given in the post below to resolve this issue:
  Disabling Visual Studio 'Just In time Debugger"

• Just in time debugger error

  Whenever I start my computer, I get the following error message, new instance of Microsoft Script Editor tries to run. I check the box and click Yes to use it, but it keeps popping back up. I have to click No two or more times to bring them up to this one. How can I stop this from happening?

  Hello

  1. do you have a version of Visual Studio installed on the machine, for example an express edition may at some point?

  If you have Visual Studio installed, but do not use it, you can uninstall programs and features.

  To avoid these messages, you can disable Just-in-Time debugging. Follow the instructions in the following link. http://msdn2.Microsoft.com/en-us/library/5hs4b7a6.aspx

  If it is little help, you can also change values in the registry.

  1. open the Start Menu.

  2. in the area of the white line (search), type regedit and press ENTER.

  3. click on continue in the UAC prompt.

  4. in regedit, go to:

  HKEY_CURRENT_USER\Software\Microsoft\Windows Script\Settings\JITDebug

  5. the value of REG_DWORD type must be set to '0' to disable debugging.

  6. close regedit.

  7 logoff and logon or restart the computer to apply the changes

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.Microsoft.com/kb/322756

• I can NOT SE get RID of a pop-up "Just in time debugger": "an exception 'Runtime error' has occurred in the Script. However, no debuggers are registered that can debug this exception. Cannot perform a JIT debugging. "Any advice would be great. Mohamed

  With the help of Firefox 4 on XP Pro SP3 2000 computer.

  See How to: "turn on/off the just-in-time debugging.

  • http://msdn.microsoft.com/en-us/library/aa187916.aspx - development tools and languages
  • http://msdn.microsoft.com/en-us/library/5hs4b7a6.aspx - just-in-time debugging

• just in time debugging problem in visual stidio

  a problem with visual studio just in time to listening to guard that happens and it ends everytimg I do

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums:

  http://social.msdn.Microsoft.com/forums/en-us/categories

• I get just in time debugging error helpp! Please

  I get just errors at the time when I try to open a program, I tried to turn off just in time debugger I a file missing in my missing registry file is dbgmanagedebugger.

  and I tried to find an answer to microsoft, they said go to the Tools menu and other things but I don't know what they mean by the tools they do explain where he is.    answer please if you know how to fix this thanks

  Hello

  · Are what program you referring?

  If the program uses Visual studio, you can post your request in the Sub forum: http://social.msdn.microsoft.com/Forums/en-US/vsdebug/threads

  You can also check: http://msdn.microsoft.com/en-us/library/5hs4b7a6.aspx

• The just-in-time debugging

  I get an error message on my screen every five minutes. It says 'a runtime exception error has occurred in the Script' he also said possible debuggers - new instance of Editor Microsoft Scrpt. whichever option I choose the message reappears constantly. any help?

  Hi andrew-wolfman-wyrsta,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you have Visual Studio is installed on the computer?

  See the link below and try the steps to change the registry entry at disableJust in time debugging on the computer.

  The just-in-time debugging can always be activated even if Visual Studio is no longer installed on your computer. When Visual Studio is not installed, you cannot disable debugging from the Options of Visual Studio Just-In-Time dialog box. In this case, you can disable debugging by editing the Windows registry just-in-time.

  To disable the debugging by editing the registry just-in-time

  http://msdn.Microsoft.com/en-us/library/5hs4b7a6.aspx

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Just in time debugging error opens the box of

  original title: just in time debugging error__

  I get this error message all the time

  An exception 'Runtime error' has occurred in the Script

  The 'Just in time debugging' opens...

  "Possible Debuggers list."

  Only option I have for debuggers is the new instance of Microsoft Script Editor

  'you want to debug using the selected debugger' yes or no

  If I choose yes I get that 'impossible to crΘer the Application Data folder error message

  I don't know what else to try. Most tell me to change the settings of internet explorer but I use Firefox so that it is not very useful to me... Thanks for your help...

  Hi xrayjones,
   
  You have a version of Visual Studio installed on the machine, for example an express edition may at some point?
  If you have Visual Studio installed, but do not use it, you can uninstall programs and features.
   
  To avoid these messages, you can disable Just-in-Time debugging. Follow the instructions in the following link. http://msdn2.Microsoft.com/en-us/library/5hs4b7a6.aspx
   

  If it is little help, you can also change values in the registry.

  1. open the Start Menu.

   
  2. in the area of the white line (search), type regedit and press ENTER.
   
  3. click on continue in the UAC prompt.
   
  4. in regedit, go to:
   
  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows Script\Settings\JITDebug
   

  5. the value of REG_DWORD type must be set to '0' to disable debugging.

  
  6. close regedit.
   
  7 logoff and logon or restart the computer to apply the changes
   
  
  EDITING REGISTRY WARNING:
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  How to back up and restore the registry in Windows: http://support.Microsoft.com/kb/322756
  
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• get a debug just-int-time message

  get a just-in-time debugging message that says 'new instance of Microsoft Script Editor.  You want to debug using the selected debugger? "This box just keeps popping up.

  Control Panel > Internet Options > advanced. Check "Disable Script debugging (Internet Explorer)" and "disable (other) Script debugging." Apply/OK outside.

  If that doesn't take care of the issue, in the debugger itself:

  1. use the Tools menu, and then click Options.
  2. in the Options dialog box, select the Debugging folder.
  3. in the file debug, select just-in-time page.
  4. in the "enable just-in-time debug these code types" box, clear the check boxes next to Managed, native, and Script *. Click OK.

  * On a client computer with this problem, I was not able to delete any of these items (can't remember which), but other areas of compensation took care of the issue. MS - MVP - Elephant Boy computers - don't panic!

• I get the message "just-in-time (JIT) debugging" whenever I have access to the program to my server

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Data.SyntaxErrorException: Syntax error: operand missing after "ayu" operator.
  at System.Data.ExpressionParser.Parse)
  to System.Data.DataExpression... ctor (DataTable table, String expression, Type type)
  at System.Data.DataTable.Select (String filterExpression)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateUser (Object tvParentNode, String Refcompte, String GroupName)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.frmUserGroupPermission_Load (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18444 built by: FX451RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
  ----------------------------------------
  CGSoft_Management_Console
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoft_Management_Console.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 10.0.0.0
  Win32 Version: 11.0.50938.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  CGSoftSVComponentServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVComponentServices/v4.0_1.0.0.0__bcc94e894d7d6067/CGSoftSVComponentServices.dll
  ----------------------------------------
  CGSoftSVDataServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVDataServices/v4.0_1.0.0.0__8b330c8f9a19eee2/CGSoftSVDataServices.dll
  ----------------------------------------
  CGSoftSVCrystalReportServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVCrystalReportServices/v4.0_1.0.0.0__2eec9c26545771f4/CGSoftSVCrystalReportServices.dll
  ----------------------------------------
  CGSoftSVUIServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVUIServices/v4.0_1.0.0.0__df7cc3d2c28dda8c/CGSoftSVUIServices.dll
  ----------------------------------------
  System.Data
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
  ----------------------------------------
  CGSoftSVTransactionServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVTransactionServices/v4.0_1.0.0.0__9d63caca3e70a9af/CGSoftSVTransactionServices.dll
  ----------------------------------------
  CGSoftSVIntuitiveHelp
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVIntuitiveHelp/v4.0_1.0.0.0__33d3177752e863ae/CGSoftSVIntuitiveHelp.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.DirectoryServices
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.DirectoryServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll
  ----------------------------------------
  CGSoftAFAccessControl
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Access/CGSoftAFAccessControl.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Transactions
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
  ----------------------------------------
  System.EnterpriseServices
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
  ----------------------------------------
  System.Numerics
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
  ----------------------------------------
  System.Web
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18446 built by: FX451RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
  ----------------------------------------
  CGSoftUGMaintenances1
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoftUGMaintenances1.DLL
  ----------------------------------------
  CustomMarshalers
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/CustomMarshalers/v4.0_4.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I get the message "just-in-time (JIT) debugging" whenever I start my computer

  Original title: salvation when windows starts, there is amessege came I, but it in body provide clarification

  Salvation during the windows startup this messege is coming

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.FormatException: The String was not recognized as a valid DateTime.
  at System.DateTimeParse.Parse (String s, DateTimeFormatInfo dtfi, DateTimeStyles style)
  to libTMachInfo.CMachInfo.GetFirstBootDate (DateTime & dtFirstBoot)
  to the SST. TSSForm.ReadSettings)
  to the SST. TSSForm.TSSForm_Load (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  to the SST. TSSForm.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4206 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
  ----------------------------------------
  ToshibaServiceStation
  Assembly version: 2.0.3378.30769
  Win32 version: 2.0.0.5
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/ToshibaServiceStation.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  PluginLib
  Assembly version: 2.0.3378.30753
  Win32 version: 2.0.0.1
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/PluginLib.DLL
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  libTMachInfo
  Assembly version: 2.0.3378.30753
  Win32 version: 2.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/libTMachInfo.DLL
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  y3fsuaxk
  Assembly version: 2.0.3378.30753
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  7zlwwoit
  Assembly version: 2.0.3378.30753
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  The error is in the Toshiba Service Station program. Try unininstalling and download the latest version

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/download.jsp?CT=DL&soID=2460122&ref=EV

  Or just uninstall it if you do not need.

  Or uninstall and get email update notifications by registering via this Web page.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=communicate&SN=false

• Expert area a upd just my time of 3 months audit can help anyone?

  Expert area a upd just my time of 3 months audit just after ive got rid of my play slip, it is unacceptable that I can't access my rewards for another month now, can anyone help?

  Hello

  You should directly contact ExpertZone as answers has no method to provide direct assistance.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What happened to the question/problem, that I just posted? You meet serious accidents on your servers that removes messages?

  I can't find the post I recently set up here. Have you had an accident which deleted all recent messages?
  I wanted to write comments to a suggestion that I got here, which was the use of Acronis as a backup manager...
  Manufactured by MowGreen - thank you for your comments.
  But you might have some use of the comment, what I am to do - I actually tried on the backup program you suggested; Acronis.
  I don't know if you have ever tried to restore a backup? You said that you never 'had to' restore...
  I tried to make a backup of my fresh without Norton and all windows and then tried to restore the backup.

  For me, Acronis 2010 ATI seems pretty useless!

  He could not read that a backup of my discs Inter Raid 5 - OK, can be forgiven.
  But he could not read from a SATA vanilla which contained a backup.
  And when I tried the last option to put a backup on a DVD, the program crashed when trying to read the DVD that contains the backup.
  So you better hope that you never have any of your backups - you will never be able to read from this backup.

  On the problem using Windows Update.
  You said that Norton 360 v2 Online is totally incompatible with Windows Vista (or Windows Update?). I am running Windows XP - is the same true for XP?
  Is this true for the Norton 360 Version 3 too? All products current Norton is not compatible with Windows?

  Here is the text that has been deleted on the Forum server:

  More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
  I created backups worthless - MS removes automatically after 90 days...

  But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
  famous error when update .NET Framework 1.1 Service Pack 1 and many others
  Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!

  While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
  need a large number of fixpacks installed via Windows Update.
  Such a group of patches is called KB930494 and the full name is:

  .NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition

  Windows Update gave a brief error msg that this update has failed and I have tried to run this update
  manually when it produces the following error message: (note he's telling the truth when it)
  claims that "Windows may not work correctly")

  ---
  KB930494 Setup error

  Error while updating your system.
  Windows XP has been partially updated and may not work properly.

  Ok
  ---

  So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
  Lots of things off, lots of BSOD...

  Og - of course I should have used the system restore and created a backup that I should come back...!
  I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
  a valid system by restoring such a backup. Probably because half the file system matches the other.

  The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
  This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?

  So guys, what is the best utility backup/restore partition there?

  Rgds. E. Ben

  ---

  Have you checked on the KB930494.log that is in the WINDOW to see where the installation is a failure?
  
  On a clean install of MCE should no problem by installing the SYSTEM .NET Framework 1.0 Service Pack 3 WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Edition Tablet PC less than security software interferes with the installation and/or corrupt .NET update package.

  In addition, it can be an order of updates for .NET 1.0 SP3 installation which will avoid the problem your system knows. You install updates in the order they are presented by automatic updates?

  See also:

  More detailed for .NET Framework 1.0 SP3 and 1.1 SP1 failures troubleshooting ideas
  Questions I've seen so far with the installation of .NET Framework 1.0 SP3 and 1.1 SP1

  As for the backup and restore utilities: http://www.google.com/#hl=en&safe=off&q=Disk+backup&aq=f&aqi=g10&oq=&fp=1&cad=b
  I use Acronis image on my MCE box, but have never had to restore it... yet.

  MowGreen MVP Data Center Management - update of safety Consumer Services

  ---
  Thank you for your response.

  I didn't know about the log file, but watching her (she is very large) it seems is it can only be useful to those writing or working with
  updates...?
  You want to send me the file here? (Probably too big). Or you want I send you the file to watch?

  Only say unique error Code I find gives the following:
  Windows XP has been partially updated and may not work properly.
  29.641: Update.exe extended error code = 0xf070

  Interesting piece of info about security SW, because I have Symantec Norton 360 v2 online riddled with bugs, but I'm not
  optimist that disable Norton 360 Windows Update would do the trick, especially since I had so much
  problems with most of the time updates .NET Framework - it seems that this Windows component is full of problems...

  On the question of the "order of Installation" I initially let Windows Update handle this the way he wanted to.
  After that giving the briefest mention that only KB930494 had failed, I then tried to revive this one update.

  Do you think the system can be restored using the REPAIR, or whatever, or I have to reinstall all windows
  from scratch?

  Kind regards

  ---
  Ben,

  There is no need to send or post the log, because the whole .NET updates installation and OS stability problems are caused by Norton 360.
  Suggest you clean boot Vista as being expected to eliminate all processes and services of Norton to interfere with the installation of the update.
  In fact, you'd be much better off dumping Norton 360 and installing a Windows-compatible antivirus software.
  Then launch their removal tool for Norton ensure all remnants no longer stay or run this tool (AppRemover) as she removes a long list of security products.
  Then download and install one of the free AVs that work well with Windows Vista, Avast or Antivir .

  You can probably repair the OS running sfc/scannow from an elevated command prompt .
  If that can't do the job, then perform an upgrade on the spot .

  MowGreen MVP Data Center Management - update of safety Consumer Services
  ---

  I can't find the post I recently put up here...

  Your history of validation can be found here: http://social.answers.microsoft.com/Forums/en-US/user/threads?user=errbebe

  Always reply to your original thread, please.
  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Hello... I'm having a problem with ps cc ever time that I create a layer mask

  Hello... I'm having a problem with ps cc ever time I create a layer mask and choose the brush in a first time, he began to remove the areas IM brushing away then stopped. After pressing X button was able to brush the image and then he kept repeating the process of pressing X and it pixlelated areas of the image. And now the masks brush and layer don't work at all whenever I start a new project.

  Hi dtain,

  Can you please try reset tool.

  To reset a tool, you must first have the selected tool. Then Ctrl-click (Windows users: right click) the button tool preset in the Tool Options bar.

  

  When you click this button, you will see a small menu and you can select Tool Reset to reset the current tool to its default value or reset all tools to deliver all the tools to its default value. Once selected, the tool will act as the first time you have used it.

  

  Using this simple method to reset your tool with a single click, you can quickly remedy any situation where the tool does not correctly and to maintain the flow of creativity going.

  ~ Jitendra