The just-in-time debugging

Similar Questions

• Just in time debugging error opens the box of

  original title: just in time debugging error__

  I get this error message all the time

  An exception 'Runtime error' has occurred in the Script

  The 'Just in time debugging' opens...

  "Possible Debuggers list."

  Only option I have for debuggers is the new instance of Microsoft Script Editor

  'you want to debug using the selected debugger' yes or no

  If I choose yes I get that 'impossible to crΘer the Application Data folder error message

  I don't know what else to try. Most tell me to change the settings of internet explorer but I use Firefox so that it is not very useful to me... Thanks for your help...

  Hi xrayjones,
   
  You have a version of Visual Studio installed on the machine, for example an express edition may at some point?
  If you have Visual Studio installed, but do not use it, you can uninstall programs and features.
   
  To avoid these messages, you can disable Just-in-Time debugging. Follow the instructions in the following link. http://msdn2.Microsoft.com/en-us/library/5hs4b7a6.aspx
   

  If it is little help, you can also change values in the registry.

  1. open the Start Menu.

   
  2. in the area of the white line (search), type regedit and press ENTER.
   
  3. click on continue in the UAC prompt.
   
  4. in regedit, go to:
   
  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows Script\Settings\JITDebug
   

  5. the value of REG_DWORD type must be set to '0' to disable debugging.

  
  6. close regedit.
   
  7 logoff and logon or restart the computer to apply the changes
   
  
  EDITING REGISTRY WARNING:
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  How to back up and restore the registry in Windows: http://support.Microsoft.com/kb/322756
  
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• just in time debugging problem in visual stidio

  a problem with visual studio just in time to listening to guard that happens and it ends everytimg I do

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums:

  http://social.msdn.Microsoft.com/forums/en-us/categories

• I get just in time debugging error helpp! Please

  I get just errors at the time when I try to open a program, I tried to turn off just in time debugger I a file missing in my missing registry file is dbgmanagedebugger.

  and I tried to find an answer to microsoft, they said go to the Tools menu and other things but I don't know what they mean by the tools they do explain where he is.    answer please if you know how to fix this thanks

  Hello

  · Are what program you referring?

  If the program uses Visual studio, you can post your request in the Sub forum: http://social.msdn.microsoft.com/Forums/en-US/vsdebug/threads

  You can also check: http://msdn.microsoft.com/en-us/library/5hs4b7a6.aspx

• How to make "just in time" debugging?

  I get a dialog referring me to the jit debugging when I try to run back to the top. I can't find more than a vague answer to the mod. suggesting that I go on debugging under 'tools '. No luck there.

  Hello

  1. What is the exact error message that you receive when you save?
  2. you perform an online backup?
  3. If so, then which browser do you use?

  Please provide us with some information so that we can help you solve the problem.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I can NOT SE get RID of a pop-up "Just in time debugger": "an exception 'Runtime error' has occurred in the Script. However, no debuggers are registered that can debug this exception. Cannot perform a JIT debugging. "Any advice would be great. Mohamed

  With the help of Firefox 4 on XP Pro SP3 2000 computer.

  See How to: "turn on/off the just-in-time debugging.

  • http://msdn.microsoft.com/en-us/library/aa187916.aspx - development tools and languages
  • http://msdn.microsoft.com/en-us/library/5hs4b7a6.aspx - just-in-time debugging

• get a debug just-int-time message

  get a just-in-time debugging message that says 'new instance of Microsoft Script Editor.  You want to debug using the selected debugger? "This box just keeps popping up.

  Control Panel > Internet Options > advanced. Check "Disable Script debugging (Internet Explorer)" and "disable (other) Script debugging." Apply/OK outside.

  If that doesn't take care of the issue, in the debugger itself:

  1. use the Tools menu, and then click Options.
  2. in the Options dialog box, select the Debugging folder.
  3. in the file debug, select just-in-time page.
  4. in the "enable just-in-time debug these code types" box, clear the check boxes next to Managed, native, and Script *. Click OK.

  * On a client computer with this problem, I was not able to delete any of these items (can't remember which), but other areas of compensation took care of the issue. MS - MVP - Elephant Boy computers - don't panic!

• Problem of Studio - just-in-time debugger Visual

  After starting my windows xp machine, I now get a window that appears, says top tab "Visual Studio Just-in-Time Debugger" indicates the error... The 32 exception unhandled victory occurred (program) [1756] just-in-time debugging this exception failed with the following error: no installed debugger has Just-in-Time debugging active. In Visual Studio, Just-in-Time debugging can be enabled from Tools/Options/Debugging/just-in-time. Search the index of the documentation for more information, just-in-time debugging errors. ...... I deleted the Visual Studio 2008 out of my computer because I was not using it. I can not as up-to-date Microsoft essentials. Anyone else having a problem with that?  It is whenever I start my computer.

  Thanks in advance,

  Diane

  Hi deards,.

  Try the step below and check if it helps.

  (a) open Internet Explorer. Go to tools, Internet Options. Click the Advanced tab and make sure below mentioned options enabled.

  ·         Disable Script debugging (Internet Explorer)

  ·         Disable Script debugging (other)

  (b) click on apply and Ok.

• Just in time debugger error

  Whenever I start my computer, I get the following error message, new instance of Microsoft Script Editor tries to run. I check the box and click Yes to use it, but it keeps popping back up. I have to click No two or more times to bring them up to this one. How can I stop this from happening?

  Hello

  1. do you have a version of Visual Studio installed on the machine, for example an express edition may at some point?

  If you have Visual Studio installed, but do not use it, you can uninstall programs and features.

  To avoid these messages, you can disable Just-in-Time debugging. Follow the instructions in the following link. http://msdn2.Microsoft.com/en-us/library/5hs4b7a6.aspx

  If it is little help, you can also change values in the registry.

  1. open the Start Menu.

  2. in the area of the white line (search), type regedit and press ENTER.

  3. click on continue in the UAC prompt.

  4. in regedit, go to:

  HKEY_CURRENT_USER\Software\Microsoft\Windows Script\Settings\JITDebug

  5. the value of REG_DWORD type must be set to '0' to disable debugging.

  6. close regedit.

  7 logoff and logon or restart the computer to apply the changes

  EDITING REGISTRY WARNING:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.Microsoft.com/kb/322756

• I get the message "just-in-time (JIT) debugging" whenever I have access to the program to my server

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.Data.SyntaxErrorException: Syntax error: operand missing after "ayu" operator.
  at System.Data.ExpressionParser.Parse)
  to System.Data.DataExpression... ctor (DataTable table, String expression, Type type)
  at System.Data.DataTable.Select (String filterExpression)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateUser (Object tvParentNode, String Refcompte, String GroupName)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateGroup (object tvParentNode, String Refcompte, String GroupParent)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.ugPopulateDataAccount (Object tvParentNode, String AccountParentID)
  at CGSoftUGMaintenances1.frmUserGroupSecurity.frmUserGroupPermission_Load (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  at System.Windows.Forms.Form.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18444 built by: FX451RTMGDR
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
  ----------------------------------------
  CGSoft_Management_Console
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoft_Management_Console.exe
  ----------------------------------------
  Microsoft.VisualBasic
  Assembly version: 10.0.0.0
  Win32 Version: 11.0.50938.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/Microsoft.VisualBasic/v4.0_10.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
  ----------------------------------------
  System
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Core
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  System.Runtime.Remoting
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Remoting/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
  ----------------------------------------
  CGSoftSVComponentServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVComponentServices/v4.0_1.0.0.0__bcc94e894d7d6067/CGSoftSVComponentServices.dll
  ----------------------------------------
  CGSoftSVDataServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVDataServices/v4.0_1.0.0.0__8b330c8f9a19eee2/CGSoftSVDataServices.dll
  ----------------------------------------
  CGSoftSVCrystalReportServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVCrystalReportServices/v4.0_1.0.0.0__2eec9c26545771f4/CGSoftSVCrystalReportServices.dll
  ----------------------------------------
  CGSoftSVUIServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVUIServices/v4.0_1.0.0.0__df7cc3d2c28dda8c/CGSoftSVUIServices.dll
  ----------------------------------------
  System.Data
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll
  ----------------------------------------
  CGSoftSVTransactionServices
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVTransactionServices/v4.0_1.0.0.0__9d63caca3e70a9af/CGSoftSVTransactionServices.dll
  ----------------------------------------
  CGSoftSVIntuitiveHelp
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/CGSoftSVIntuitiveHelp/v4.0_1.0.0.0__33d3177752e863ae/CGSoftSVIntuitiveHelp.dll
  ----------------------------------------
  System.Xml
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  System.DirectoryServices
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.DirectoryServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll
  ----------------------------------------
  CGSoftAFAccessControl
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Access/CGSoftAFAccessControl.dll
  ----------------------------------------
  System.Configuration
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  System.Transactions
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll
  ----------------------------------------
  System.EnterpriseServices
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
  ----------------------------------------
  System.Numerics
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll
  ----------------------------------------
  System.Web
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18446 built by: FX451RTMGDR
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/System.Web/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Web.dll
  ----------------------------------------
  CGSoftUGMaintenances1
  Assembly version: 1.0.0.0
  Win32 Version: 1.0.0.0
  Code: file:///D:/CGSoft/Program/CGSoft%20Management%20Console/CGSoftUGMaintenances1.DLL
  ----------------------------------------
  CustomMarshalers
  Assembly version: 4.0.0.0
  Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
  Code: file:///C:/Windows/Microsoft.Net/assembly/GAC_64/CustomMarshalers/v4.0_4.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I get the message "just-in-time (JIT) debugging" whenever I start my computer

  Original title: salvation when windows starts, there is amessege came I, but it in body provide clarification

  Salvation during the windows startup this messege is coming

  See the end of this message for details on the call
  just-in-time (JIT) debugging instead of this dialog box.

  The exception text *.
  System.FormatException: The String was not recognized as a valid DateTime.
  at System.DateTimeParse.Parse (String s, DateTimeFormatInfo dtfi, DateTimeStyles style)
  to libTMachInfo.CMachInfo.GetFirstBootDate (DateTime & dtFirstBoot)
  to the SST. TSSForm.ReadSettings)
  to the SST. TSSForm.TSSForm_Load (Object sender, EventArgs e)
  at System.Windows.Forms.Form.OnLoad (ByVal e As EventArgs)
  at System.Windows.Forms.Control.CreateControl (Boolean fIgnoreVisible)
  at System.Windows.Forms.Control.CreateControl)
  at System.Windows.Forms.Control.WmShowWindow (Message & m)
  at System.Windows.Forms.Control.WndProc (Message & m)
  to the SST. TSSForm.WndProc (Message & m)
  at System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  at System.Windows.Forms.NativeWindow.Callback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

  Loading assemblies *.
  mscorlib
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4206 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
  ----------------------------------------
  ToshibaServiceStation
  Assembly version: 2.0.3378.30769
  Win32 version: 2.0.0.5
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/ToshibaServiceStation.exe
  ----------------------------------------
  System.Windows.Forms
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
  ----------------------------------------
  System
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  System.Drawing
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
  ----------------------------------------
  PluginLib
  Assembly version: 2.0.3378.30753
  Win32 version: 2.0.0.1
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/PluginLib.DLL
  ----------------------------------------
  System.Xml
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
  ----------------------------------------
  libTMachInfo
  Assembly version: 2.0.3378.30753
  Win32 version: 2.0.0.0
  CodeBase: file:///C:/Program%20Files%20(x86) /Toshiba/TOSHIBA%20Service%20Station/libTMachInfo.DLL
  ----------------------------------------
  System.Configuration
  Assembly version: 2.0.0.0
  Win32 Version: 2.0.50727.4016 (NetFxQFE.050727 - 4000)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
  ----------------------------------------
  y3fsuaxk
  Assembly version: 2.0.3378.30753
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------
  7zlwwoit
  Assembly version: 2.0.3378.30753
  Win32 Version: 2.0.50727.4205 (VistaSP2GDR.050727 - 4200)
  Code: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
  ----------------------------------------

  JIT debugging *.
  To enable just-in-time (JIT) debugging, the .config file for this
  application or computer (machine.config) must have the
  jitDebugging value set in the system.windows.forms section.
  The application must also be compiled with debugging
  permit.

  For example:

  
     
  

  When JIT debugging is enabled, an unhandled exception
  will be sent to the JIT debugger registered on the computer
  rather than be handled by this dialog box.

  The error is in the Toshiba Service Station program. Try unininstalling and download the latest version

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/download.jsp?CT=DL&soID=2460122&ref=EV

  Or just uninstall it if you do not need.

  Or uninstall and get email update notifications by registering via this Web page.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=communicate&SN=false

• I just publish my Muse on Adobe site, and now when I do a search and get a return on research, it contains the name of the site several times. It is in the properties of the page?

  I just published my Muse on Adobe site, and now when I do a search and get a return on research, it contains the name of the site several times. is it in the properties of the page?

  You mean search Google search? or you use any search module in your site and the keywords shows same subject several times on the page?

  Please elaborate more, indicate the url of site.

  Concerning the use of keywords, description, etc, you can add on your page using the page properties > metadata section.

  http://Muse.Adobe.com/strategies-for-SEO.html

  Thank you

  Sanjit

• The relay through time and Total flow control

  Hi all

  I'm relatively new to Labview and have worked on a great program from lately, which uses a Module with my cDAQ-9178 OR relay SPST 9481 to open and close the 3 different solenoids. The program should open at a specific time and leave it open until a certain amount of flow is passed through them. I already finished the programming to record the total flow through the valves, and after many hours past the forums I found a way and changes in the code that turns on the relay based on the amount of time spent searching, however it turns on the relay and leave them on until the 'period' are filled then pass on the next round. I need to change this option further so that it lights when my "Cycle Start Time" is reached, turns off when reaching the set amount of flow for this cycle and then continues to wait until the next "Cycle Start Time" occurs.

  I imagined a way to proceed would be; by eliminating where departures from the clock a new cycle each run and just have it constantly by comparing the time of "Initial start (run)" 'Start' time sequence (when I push the start sequence and actually start to opening the relay). Then change the "delay" to 'Cycle start time' and the (> =) function to a function (=). So now, it begins after the elapsed time is equal to the start time of Cycle. Certainly, this opens the questions, because currently, at the beginning of the cycle the command of the relay begins. So I need make my comparison outside the case 'Cycle' or move the control relay in the case of 'true/false '. However, then I run the question of how to get the software to change the case once he saw to stop the relay.

  As you can see, I have about 1 million different things in my head that I played with. Advice or assistance to get me on the right track, or you know of examples would be great! My code is attached below, and I'll post a photo after this post about how I'm taking care to record the total flow. Thank you for your time and help!

  Hi M_Blaylock,

  You mentioned that you are relatively new to LabVIEW. Are you familiar with some of the debugging tools?

  http://www.NI.com/getting-started/LabVIEW-Basics/debug

  Turning on climax execution should allow you to see the data flow through your schema. Also, probing the wire just before the input case structure should allow you to see what data is actually trying this case selector. If you get unexpected data, you can probe the front steps to see source these unexpected data.

  I hope this helps and good luck with your code!

• REMOVE the past two times

  We are on DB Oracle 10.1.0.4 and recently did an update of a simple PACKAGE, which uses only one cursor to identify records in a table, and then as it moves through these records, it removes each via a second SQL statement, essentially as
  

  declare
    cursor csr is select * from table where <date criteria are true>;
    row table%ROWTYPE;
  begin
    open csr;
    fetch csr into row;
    loop;
      if csr%NOTFOUND then
        exit;
  
      else
  
        delete from table 
        where primary_key_field1 = row.primary_key_field1
          and primary_key_field2 = row.primary_key_field2;
  
      end;
    end loop;
    close csr;
  end;

  It turns out that each 1 of 10 (we deletions rollback 53K each time, because we are still troubleshooting program) tent the same line is attempted to remove, as if the first deletion "did not". At first I thought that we were not ALL inclusive of the fields participating in the primary key of the DELETE statement. But this isn't the case.
  
  I can literally sitting there with the same block anonymous PL/SQL that runs the PACKAGE and then just run it on & more & more and eventually it breaks when he tries to 'double - delete' the same record. We even checked the deletion repeat by issuing the: old. ROWID BEFORE Trigger LINE of the table. He appeared 2 times in a row, under the error condition.
  
  The other strange thing is that it breaks on different lines. We have added an ORDER BY on the slider, assuming we get to break in the same place every time. It did not help. 1 out of every 10 executions still broken on a different line.
  
  When we change the structure of encoding to use for the UPDATE... and WHERE CURRENT OF csr then everything works fine.
  
  Someone at - he heard of this type of behavior before?
  Thank you
  -= Chuck

  chuckers wrote:
  With the help of a debugging utility, we built in the original code, we found that the PACKAGE with the DELETE statement has not received the focus between the subsequent firing of the trigger for the ROWID even (so there is no way to reset this variable).

  You can try to develop more on what your real problem is in your application?

  According to your description my understanding so far is the following:

  1. you perform a delete in a loop - each iteration of the loop trying to delete a single row with a primary key (composite)

  2. you have defined business rules in the triggers - however in this specific case that you want to use the "short-cut" of triggers mode which is activated by setting a package variable in your session

  3. after the assessment of the package variable trigger resets this package to NULL variable. Why you set the null of the trigger package variable? Why not run the loop with the 'shortcut' active permanently and turn off when the loop is complete?

  4 given to (in your case doubtful) restarting the DML, the same line-level trigger is returned several times to the same line. Because the package variable is set to null in the first execution of the trigger, it will now be NULL in subsequent runs for the same line

  So, what happen exactly to your application trigger logic in case the package variable is NULL?

  Or is there another problem with your application? Perform any non-transactional operation which then gets pulled several times (as shown / explained by Tom Kyte)? Note that any transactional operation in the trigger is supposed to get restored and restarted so all business logic you have made in the triggers in the same transaction should get restored and re-applied with the reboot. This should have no problem in terms of replay.

  As I've mentioned before, your approach is wrong in general since Oracle can raise row-level triggers several times to the same line, reset the package in the trigger variable is a no-go if it breaks your logic in the following possible executions of the trigger for the same line. You can't avoid this and you don't have control over that - quite simply, it can happen (I still wonder why it seems to be happening in your particular case, has shown with single user einreihig deletions).

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  Co-author of the book "OakTable Expert Oracle practices":
  http://www.Apress.com/Book/view/1430226684
  http://www.Amazon.com/Expert-Oracle-practices-database-administration/DP/1430226684

• iPhone cannot connect to the Internet via time capsule

  I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

  I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

  I don't know what the cause of the problem. Any help will be appreciated.

  He has worked in the past and now could not or never worked?

  Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

  If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

  Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

  (leave the security for a few minutes and see if that makes a difference).

  For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  Tell us which modem cable, you have, make and model please?

  The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.