just installed a new monitor for photo work. It works well with all my photo programs, but all video programs just show a blank video section (audio controls, etc OK) .__Any suggestions? __screen is an EIZO CG22W__XP

Similar Questions

• I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  I have CS6 on old computer and that you have disabled it. I now want to install the new computer. Downloaded and Set UP wrote the serial number is valid but does not CS 6 show as a product available. ???

  Please have the link below to download correct application download Creative Suite 6.

  Please answer in a private message serial number that you use to activate it.

• HP 6500 scan high resolution works well with the solution Center HP; but is solid black w/imgage software for editing

  I got an OfficeJet 6500.

  If I try to scan a picture at a very high resolution, using an image of image editing software will come out black.

  I can scan the image using the HP solutions, at the same high resolution Center, and the image will scan very well.

  I think there is a setting for the Windows operating system that needs to be adjusted. I know because I had this same problem once before.

  I found the solution to my problem. but my computer crashed and I had to reinstall the full Windows operating system. I lost the changes I had made. It was in January 2011.

  I don't remember when I had the answer to my problem but I thought that I asked the question in the HP forum (it would have been some time in late 2010) and then someone answered with the solution to my problem. But I can't find the post I did then.

  -My operating system is Windows 7, with a 64-bit operating system.

  -The processor is an Intel Celeron 2 .50GHz.

  I would appreciate any help someone can offer.

  Hello JimTrail

  After watching this on the web, it seems that you is maybe to something. From what I found, GIMP uses a lot of resources, especially true for larger images. He isn't able to handle the scanning of an image as large as 4800dpi without additional RAM or virtual memory to compensate for the RAM.

  My suggestion would be to increase the size to the recommended or higher. Out of curiosity how much physical RAM have you? Microsoft recommends that virtual memory for no more than 3 times the amount of RAM installed. See article: change the size of virtual memory.

  You can also see the article below on the Tile Cache GIMP.org.

  How to set your Tile Cache

• The new version does not see my camera. But my cam works well with older versions. What should I do?

  The new version of Skype does not see my camera. But my cam works well with all older versions. And it works with any other programs as well.

  Try to uninstall the version 6.18 and install version Skype 6.14.0.104.

  You can use this download link for the 6.14.0.104 version:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Don't forget to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• I installed a new game for Pc windows 7 & I got the support of the United Nations, is at - it software to install to run all the games correctly?

  I installed a new game for Pc windows 7 & I got the support of the United Nations, is at - it software to install to run all the games correctly?

  All games (or programs) are compatible with Windows 7. See the Web site of the Publisher of games for compatibility information.

  Windows 7 has compatibility mode that peuvent leave some older games that would be otherwise incompatible for work. Please see:

  http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows .

  Very old games can contain 16 cold bits that will not work if you have 64-bit Windows 7 without Virtualization software.

  What is the name of the game?

  Are you using windows 7 32 or 64-Bit? *

  * To see if you're running 32-bit or 64-Bit Windows click:

  Start-> Control Panel-> system

  Then look at where it says, "System Type".

• I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  I'm trying to install Adobe PS CS3 for my boss on another computer. I put the program on a hard disk and copied to the other computer now, it does not open and said he needs the license. What can I do to make it work on this computer?

  Copy the program through a new machine will not work.   Install it using installation files and activate using the serial number assigned to the license.

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

• How to stop the bridge.exe active as to install the new application for example. Flash CC?

  How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?

  I can not install any new demand every time.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• I can no longer print Windows Photo Viewer printer works very well with all the other prog

  My Epson printer has always worked well with the Windows Photo Viewer that I prefer to use.
  A few weeks ago, I ran a computer cleaning prog that I didn't like, and so removed, now I can print from any program except Windows Photo Viewer
  I use Win 7 Home Prem 64 bit

  Hello

  Thanks for the reply.

  Method 1.

  Check that you are doing the default Windows Photo Viewer.

  Try the steps below; It could help us solve the problem.

  1. open default programs by clicking the Start button.

  2. click on Control Panel, and then click default programs.

  3. set your default programs. This option allows to choose the programs that Windows uses by default.

  4. Select Windows Photo Viewer in the list and click Set this program as default.

  5. try to access photo and check if it opens with the Windows Photo Viewer.

  Also access the link to know how to set and change your default programs: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default

  Method 2.

  I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  The "General" cloud requirements are quite low... so you have to ask in the forums of specific program for a special features used by individual programs

  For video editing Premiere Pro, go read it in community: Forum Hardware | Adobe Community

• MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

  Doesn't look like 4K is a good option.

  /macbook-pro-retina-display-how-to-manually-switch-http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

  Graphics.html #extdisplays

  Built-in display:

  15.4 "Widescreen

  Native resolution:

  2880 x 1800

  Details:

  This model has a screen 15,4 "color widescreen LED backlit with IPS technology with a 2880 in native resolution from 1800 to 220 DPI (178 degrees viewing angle). It also supports of the resolutions on the scale of 1920 by 1200, 1680 by 1050, 1280 by 800 and 1024 by 640. See also: how can you 'strength' or 'hack' the Retina Display MacBook Pro models running at the native resolution or otherwise more on screen that adapt default?

  2 screen support:

  Double/mirror *.

  2nd Max Resolution:

  2560 x 1600 (x 2 *)

  Details:

  * This model supports a simultaneous maximum resolution up to 2560 x 1600 on two external displays via Thunderbolt. Alternatively, it can support a single screen up to 2560 x 1600 per Thunderbolt and one display up to 1920 x 1200 through HDMI. Although it can theoretically supply all the three external displays, such as confirmed by a useful player, it runs too hot with three connected screens.

  http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.7-15-early-2013-retina-display-specs.html

  Although I think I read some hacks to make 4 K @ 30 fps.

• PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  Is this the same computer (Windows XP?) as in that previous thread of yours? -Online http://answers.microsoft.com/en-us/windowslive/forum/messenger-signin/cant-sing-to-messneger/23775604-86f9-4bd0-8de8-cc39f10df40b

  ~~~~~~~~~~~~

  Related resources can include:

  MSN Solution Center
  (Registration required; Subscribers of MSN Premium only!)
  http://answers.MSN.com/

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784

• New type of font "Century Gothic" and works well with the 'live view', but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank y

  I downloaded my new "Century Gothic" font type and works well with live view, but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank you!

  I use and Filezilla to connect to our FTP site.

  I see on line 42 of style.css

  do-family: 'Courier New', Courier, monospace;

  I see on line 180

  do-family: "Helvetica Neue", Helvetica, Arial, sans-serif;

  and I see FontAwesome used in several places.

  I can only conclude that Courier New is the applied font.

  If you have a different version of style.css on your local system?

• Not found DVD Maker "DVD burner" message when DVD writer works well with other programs

  Hello

  I just created a DVD with AVS Video Converter and burned a DVD with no problems and created later a film with Windown Movie Maker, which worked well, it has exported to Windows DVD Maker, again not a problem, but when I click on burn, I get a not found message "DVD burner". How can I fix, I know the burner works very well because it works with other programs... And Windows DVD Maker was working fine until recently and outside a updated Windows Vista, I did not further updated or changes to the computer.

  Thanks for your help!

  Hi Froggie_UK,

  Since this problem you encounter began after that windows update, you can use the System Restore tool to return your computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Before you start Please back up your data

  To restore the operating system to an earlier point in time, follow these steps:

  ·         Click Start, type System Restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  ·         In the System Restore dialog box, click choose a different restore point, and then click on Next.

  ·         In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  ·         Click Finish.

  ·         The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  If it is an update, the best way to solve this problem is to apply only updates one at a time to determine which updates is causing this problem.

  Click on start-> all programs-> Windows Update, click on change settings in the left menu. Select download updates but let me choose whether to install them, click OK. When you are alerted to install a new update, in this window, click updates see, uncheck all updates and select one at a time, install it, restart your computer, test and update. Once you find the update either continue to ignore it, or look for it at http://support.microsoft.com/.

  We hope this resolves the issue and look forward to hearing back from you on your results.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Adobe Premiere Pro and After Effects works well with the merger?

  Hey everybody,

  I'm in the middle of a semester at the University and I use Adobe Premiere Pro and Adobe After Effects (Windows version). I was wondering if the merger would work well with these programs? I intend to the latest update of merger next week.

  The mac I use is an iMac in August 2008 (running 10.5.6). 3.06 Ghz, 4 GB RAM, 1 TB HD, and a Nvidia GeForce 8800. I also install Windows XP Pro edition and the value of using two processors and 2-3 GB of RAM.

  I will also put it on a new account make sure that practically nothing is running while im current merger.

  I use this for my final college.

  Edit: I forgot to mention. I use CS3. My school has not yet updated in CS4.

  In addition, you think that a 64-bit version of Vista will work best and then 32 bit XP on this partition?

  I love Fusion as much as anyone here and use it a lot. But, in saying that...

  You use this something really important - your final college. You need to perform at its best performance with as few problems as possible because you don't have a lot of time in your semester left (in the grand scheme of things).

  My advice - do not experiment. Work around the merger (as heretical as it may seem on this forum) and first and AfterEffects in a punt in native mode Windows XP OS that is on a BootCamp partition. Video editing will focus on i/o and graphics of your system performance - and nothing works better for this than the native access to the system.

  Running two processors in a virtual merger with computer on a machine with 2 hearts can lead to better performance and is not recommended.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!