just keyboard damaged or more? T520 beer at the keyboard
Hello! First excuse my bad English im from the Germany.
Two days ago I droped beer on the keyboard of my t520 (not much about 5 cl), the notebooke worked after it is normal. When I tried to boot up the laptop the next day nothing happened when I pressed the powerkey. I removed the keyboard and inside is all dry, so I guess that happened without water inside. A few hours later the laptop starts but I wasn't able to write my password it comes the sound you hear when you have an empty Word document and press the BACKSPACE key. I removed the keyboard again and tried to clean it with a wet towel and dry overnight. Now, it starts and stops over and over a few seconds. Without pressing the powerbutton. Can someone tell me if it's just the keyboard and if I change everything goes well or can it be some critical damage.
Thanks for your help and best regards
Hi, I just wanted you to know, that it was really just the keyboard ! A new is now installed and everything works perfectly. I'm very happy about it!
Tags: ThinkPad Notebooks
Similar Questions
-
I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.
See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA
Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009. This support now will cost $59 us $ (or more) per incident.
Good luck!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Original title: C:\windows\system32\icacls.exe
For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection. Whenever I do; try to download something or download something, I get the following error:WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.
C:\windows\system32\icacls\exeI have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.
Any suggestions? I really need to download Trend Micro.
Thank you
AmySee the article below:
ID of the KB Article: 2588679.Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened."Check the following settings:
Right-click on the downloaded file. Select Properties.
Click the Unlock button.Check the suggestions the following threads:
http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826Let us know if that helps.
-
I have windows 7 and that you have not knowingly changed parameters. When I try to download something or play sims # I get a message that says your internet security setting preventing one or more files being opened.
Hi facions.
What browser do you use?
If you use Internet Explorer, you can optimize Internet Explorer and check if the problem persists. For more information, follow this link: How to optimize Internet Explorer
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I followed aid guidelines that provided me by windows, but it does not solve my problem,
I'll click on Device Manager and I get this error message which is "Can't open these files", "your internet security setting prevented one or more files being opened.
I have tried everything that windows told me to do but without success!
I click on options internet and changed levels of security around but yet once, without success! Does anyone have an idea?
Thank you very much for the support, I thought of a solution, I bought Windows 7, I installed it on a partition again and fortunately I no longer receive errors
-
How can I replace an editor Adobe Photoshop Elements 9 "damaged"?
I have been using this program for years and all of a sudden - its damaged!
I have not the CD more if that's how I got it in my Mac.
I tried to retrieve the serial number through Adobe, but... the account I "had" with Adobe for years has been under a name of ID that I don't remember years ago. None worked.
I therefore restored a new account to be able to communicate with Adobe with this name for what to do.
So, what should I do?
I need this program.
You can download the installation program:
Download Photoshop Elements products | 9, 8, 7
Your serial number issues will have to be developed with support, so call them.
Mylenium
-
Until recently, I could get a preview of the text in a message board thread by scrolling on the thread binding. Earlier, this feature has stopped working. Now when I run the wire, a small box appears under the cursor, but no text.
Just a reminder:
I see tooltips in the disboards link you gave with Fx 3.6.12 under XP.
You don't see them with the same versions.
Many people say that this problem can be caused by the Google toolbar.
I don't have Google toolbar.
You do.
But if you disable the Google toolbar you still see the problem.I googled a bit and can't find any other because of this. Now, my suggestion is to uninstall the Google toolbar and see if the problem goes away. If that doesn't work try safe mode as described here:
http://support.Mozilla.com/en-us/KB/basic+troubleshooting#Troubleshoot_extensions_and_themes -
Can someone help me please, I don't know how to use a computer I was googlen 4 days! When I opened my computer it always tells me that the file is damaged and unreadable. Please run the Chkdsk utility... I searched my computer for "chkdsk utility" and can't find that. Help, please!
From what you say, you are probably unable to start Windows.
In this case, when you start the computer, keep tapping the key "F8" on the keyboard until the Advanced menu comes up. Then choose "Safe Mode".
You will see something like your ordinary, here to enter office "chkdsk volume: /f" (replace with your hard drive volume, in most cases, it's 'c') at the command prompt.
For reference:
http://support.Microsoft.com/kb/315265
Hope this helps
Post back if necessary
____________________
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
New tab page to view the 15 links. Now it just shows 3. How to bring back the rest?
You can zoom the subject: newtab page to resize tiles and tiles most enter on the page.
- View > Zoom > Zoom out; CTRL and -
'Zoom text only' should not have a tick
This will affect all elements of the page, text so get more smaller institutions.
Make sure that a tab with the subject: newtab page is open when you change the zoom of the page.
Toggle the pref browser.newtab.preload false on the topic: config page in case of problems with remembering the zoom on the page of the on: newtab page.You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.See also:
- New tab tools: https://addons.mozilla.org/firefox/addon/new-tab-tools/
- View > Zoom > Zoom out; CTRL and -
-
Hi, I have just reset my Firefox and he lost ALL the TABS at the top. Bookmarks, history, leadership, Edit and Options tabs are GONE. I don't know that I named all right, but they ARE GONE. Please tell me how to get back them. Thanks, Chris
Edit: removed your email address from the public view, since the only thing that will attract are spambots. you will be notified by email whenever someone replies to the thread, because of a bug in the forum unfortunately with a slight delay. (philipp)
The toolbars are still on display in your browser?
If you still have the address bar, right click on any part that is not a text box or the icon, or if you do not like that of any space right click on the three horizontal lines on the right side of the address bar window. This should show some options, click on 'Menu Bar' and the tabs you are missing should appear.
As a side note, usually if these options are missing, your icon of firefox in the upper left corner of the window should look different (being a rectangular button itself as opposed to an icon), and the 'file', 'Edition', 'Bookmarks', etc., are found after clicking on this button.
Hope that helps.
-
Question
I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?To open the window to customize the toolbar, do one of the following:
- Firefox button > Options > toolbars
- Press ALT or F10 to temporarily show the Menu bar and choose from there (view > toolbars > customize)
- Hold DOWN the ALT key while pressing the VTC keyboard letters
See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36
Regarding the new button tab, you see the end a '+' after the last tab or the right of the tab bar? This is the icon of the new tab.
- CTRL + T will open a new tab
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
Problem "there could be a problem with one or more network adapter on the computer?
Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?
Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.
Hello:
If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.
-
Can transfer easily to be run more than once on the receiving system?
Can transfer easily to be run more than once on the receiving system?
I installed Win 7 on a separate XP drive and I am able to switch between them starting from their respective readers.
I made an easy transfer between them and now intend to install it and test my programs on Win 7. Once I've got everything working properly, and that all migration issues are resolved, I would like to make a clean second run Easy Transfer of XP just before the final switch to Win 7.
"Clean run" I mean I want all the Win 7 system to be completely replaced by the new data and the parameters of the XP system.
Easy transfer will do that?
What I would recommend that you do, is create a new account user in Windows 7, then restore the backup Windows Easy Transfer in the new account and delete the old account that you created in the first place.
-
My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either. What can I do next?
Buy an inexpensive wired USB mouse for less than $5 and see if it works. As far as I'm concerned wireless mice are more trouble than they are worth. YMMV :-)
Good luck.
-
I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file). When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it? I use DreamWeaver 2004 on a PC.
You will need to correct the links that begin with "file".
Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.
Click on the yellow folder on the property inspector, and then select the target page.
If your site is small, you can edit the links manually (remove the part in red)
content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/
It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.
Maybe you are looking for
-
Can I install a graphics card to my z370?
I really want to install a graphics card in my laptop which runs on these graphs shared at present. Need help Specifications:I3-2330 m cpu 2.20 ghz8 GB ramWindows 7 64 bit
-
How to disable text-to-speech (TTS) on moto cliq 2.1.5
Good so I was sleeping with my settings and see TTS, figured hey what's - do this, installed the voice synthesizer app and then implemented. After I received a phone call from a friend and the TTS began to say the name that is not what I want at all
-
Hello. Just noticed today while he was trying to take a timed shot. No timer on the camera app, which I see as a basic function I had in smartphones from 7-8 years. And I mean, camera, camera of Motorola. Please do not ask me to go to the Google came
-
Someone else never put in a bigger HD (upgrade from 500 GB to 1 TB) and uses the recovery discs? (POS compared to a real OS disk. - thank you Micro shit) I intend to do a dual boot at the last Ubuntu if I find out that the drivers all work with the H
-
I have a problem with my wireless
I went and changed to configure windows, but now it says wireless in range... but I have internet wireless... I know I'm missing something please help