Just openning LabVIEW and causing 99% CPU usuage
Hi people,
I just opened LabVIEW 8.2.1 and later, he finishes its initialization, while on the start-up screen LabVIEW uses 99% of CPU.
I tried to restart and repair the installation, but nothing helped. Someone has experienced this problem?
Thanks in advance!
One thing to try: start in safe mode. I think that LabVIEW should always run in safe mode, although no service will operate. I would be very interested to know if the CPU usage is still attached.
Tags: NI Software
Similar Questions
-
Satellite A300 DVD tray will not open and cause high CPU utilization peaks
Hello
I have a laptop Toshiba Satellite A300 - 1 MM and I have a problem with the optical drive (Mat * un DVD Ram Uj880as):
DVD - RAM plateau sometimes refuse to open. The LED lights up briefly, but still nothing. Windows recognize the drive but the plateau of refuses to open. Eject commands the position of work and management of the computer-> disk management will not work. I can open the tray manually but the optical drive will not read any cd/dvd. No error code in return.
When that happens it cause peaks of high utilization of the processor (from 60 to 100%) in the System Idle Process. Just stop and restart it solve. After that, the laptop also runs fine and the optical drive.
I replaced Win7 32-bit with a 64-bit version and the problem persist.
Help, please. Thank you.
I have the same machine with Win7 32 bit and use several players. Everything works perfectly. On this virtual path, it is not easy to say what may be the problem. The configuration of your laptop is not known to us, and we don t know how you set up your operating system and additional applications are preinstalled.
Maybe stupid advice now, but you must install recovery image original Vista that you got with the functionality of your laptop and test with the factory settings. If the same problem occurs we can chat about it.
-
Have old Dell Dimension 32/bit with Win XP Prof 2002. I installed the security suite CA from my ISP, which is a huge program and uses 100% CPU on starting and stopping, slowing everthing at a snails pace. I deleted evrything I need not using 30 days free Revo Unistaller Pro, but when I try to access the CA firewall to add programs to the exemption, it opens, then freezes tabbed Firefox and nothing else. Can not even stop from the start menu. I want to get rid of all (even if it's a good program, it's too big) and return to my Win Firewall(or another better free firewall that's good for more than 30 days trial) and some other internet security free program that is easy, runs in background and does not all my resources and is not just a 30 day free trial until you purchase the program. I also try to install a wireless adapter, so I can drop my ISP and use the free city/county signal as no work for 20 months!
This has happened
A few times a week
== Trying CA security firewall access Suite
I am the original poster, and I got rid of CA Security Suite & and loaded the Avast! who has some interesting features, even on the freeware. No more crashes or freeze & yes I think there is a problem with CA & Firefox, but don't know what it is. It was a big big time eater. I also got rid of my ISP and installed an Intellinet Wireless G PCI Card & am now entirely wireless on my PC. More quickly by far than what I was paying $50 / month for & I use my Windows Firewall.
-
I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?
You need to activate the phone. There is nothing that the phone can not be activated.
-
Hello guys, I have a 32 GB IPad 3 with an operating system of ios 9.2.1 this problem has never happened before and what happened, it's just a normal day and the iPad was running smooth as always until there was suddenly a notification when I opened my iPad from YouTube, so I opened it and all of a sudden when I opened the application crashed and I was on the home screen and all records have were missing, though safari and app store were in a folder so they disappeared in Buthan, I went to the settings and all applications have plaseeeeeeee someone tell me how to solve this problem
Try to keep the sleep/wake and the "home" button until the Apple logo appears. -AJ
-
I have the iphone 6, since yesterday it does not open a lot of apps, they look just as they open you and then it comes out of the application itself, and I need information in my apps so I can just remove them and reinstall
Have what troubleshooting you done? Surely you have tried something before posting here, Yes?
Hold power and home until is buttons restarts.
-
Original title: redirection
When I type in a search on the web for anything whether it's IE, eBay or Facebook my PC just redirects research and opens another page, how can I rectify this
Hi Mark,Your computer is probably infected by a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guideIt contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.Brian -
Just opened a new vista Windows upgrade disc and my computer does not recognize it? My computer always tells me to put a disc in when it is already. I can't my PID because I can not install the program. I can't get help from microsoft because I do not have my PID. Help please
Your optical disc drive must be able to read the DVD to install Vista.
See you soon. Mick Murphy - Microsoft partner
-
Windows Update causes high CPU AND not let me install Windows 10
Windows 7 update has several issues:
1 Windows Update Service causes the CPU usage high - CPU usually works 50% or more with a single SVCHOST.exe running. I click with the right button on the SVCHOST entry in Task Manager-processes and saw all the services that SVCHOST is still running. One at a time, I stopped and restarted them. Finally, when I stopped the Windows Update service, the cpu immediately fell to almost nothing. I rebooted and tested several times, and each time, it was Windows Update service that was causing the high CPU.
2. Windows 10 Upgrade Advisor says I could upgrade to Windows 10, and get the icon Windows 10 is in the toolbar. But it has failed to install several times. Now, after stopping and restarting the service of updating (and I checked, it is started), the window get Windows 10 rises, is empty and goes.
3. I ran the Update Diagnostic and got 1 error:
Windows Update error 0 x 80070003(2016-04-04-T-04_56_09P)
the Details of the Diag Windows Update window said:
RootCause: RC-DataStore
Error code: 0 x 80070003
4. I tried to launch the 'Fixit' for update, but it did nothing.
5. I tried to update Windows Update WindowsUpdateAgent30 - x 64 .exe Agent,
but it fails with this message:
"Windows Update Agent Installer has met a fatal error"
6. when I try to start Windows Update-check for updates, it displays the dialog box "check for Updates" and activity indicator green runs and runs and runs for more than 10 minutes but nothing happens. And when I check the view update history, it shows no updates, even though I know that I've run a LOT of updates in recent years.
7. I thought to reinstall Windows 7. I went to download from Microsoft, and when repair installation it activated my key it says that it wasn't a retail version, so check with the supplier (in this case HP). I checked with HP and they said that this machine was is no longer supported.
8. on the way I've renamed the folder C:\Windows\SoftwareDistribution-Windows SDOLD, force it to create a new (probably why it does not find the old updates). IT did not help.
So it seems to me this machine is expandable to 10 Windows (it meets the specifications and the Advisor to update Windows-10 said yes and installed the toolbar). But something is wrong, probably with Windows Updater, and now nothing will be update or upgrade. And I can't get a new copy of Windows 7.
So, any thoughts? I'm out of ideas.
All I can say is to ensure that you have the latest Net framework installed manually 4.6.1
https://www.Microsoft.com/en-US/Download/details.aspx?ID=49982And the most recent client update
https://support.Microsoft.com/en-us/KB/3138612Also manually install it kb3136000
-
* Original title: Quick heal installed in windows
I installed quick heal antivirus in my laptop and I installed the software manufacturer third, software flashing just opened for a short time and not close access. problem occurs on Win 7 and XP.
(Moved to install, upgrade, and activate)
Uninstall Quick Heal and see if the problem resolves.
Try another Antivirus utility:
-
I just opened my Acrobat 9 Pro and received an error message indicating that my license had expired with number (148: 3). What is c?
Restart your flexnet licensing service, http://techie-buzz.com/how-to/fix-adobe-error-code-148-3-licensing-issue.html
-
I have just the creative application of cloud on my mac than its opening upward and said 'impossible to arrive on the Adobe servers. Please check your firewall settings and try again in a few minutes. I keep trying and it still happens?
Hello
Please make sure that there is no Proxy setting on your network and also check that you are logged into admin and not as mobile admin. You can also try to connect the MAC to a Wi - Fi network to different/open or Mobile Hotspot and disable all antivirus on MAC titles and try to check if the creative cloud app works.
Thank you.
-
Hello
We just opened a new office in Paris and we want to ensure our residents a suite creative cloud a s the one we have in our offices. Must we agree a new?
Hi Vincent,.
Yes, you can buy subscriptions.
You may well want to read on creative cloud for teams, will surely be of great help to you.
Plans: pricing plans and membershipcreative cloud | Adobe Creative Cloud
Creative cloud for teams:-https://helpx.adobe.com/creative-cloud/faq/teams.html
Hope this helps
-
I try to open photoshop and a pop just indicating my trial has expired and I need to sign up. I am registered until February 2016. How can I fix it?
Maybe
Launch of creative products of Cloud in test on non-English operating systems. CC
or
Creative Cloud applications unexpectedly back in the test mode. CS6, CCM
-
I use Adobe Reader and Adobe Acrabat (if there is no difference) and I have been a Sony tablet. I use a PDF file as a lesson plan, normally to just open the document and it moves automatically to 'recent' in 'my documents '. But when I close this document in particular I need to find it in my downloads and open again in Adobe, but the changes I made are not here obviously? How can I move an item in the recent myself? Help, please!
Hello
What is the operating system on your Sony Tablet? Windows or Android? What is the version of the operating system?
Your documents are stored on your device or on the cloud (Cloud Document Adobe, Adobe Creative Cloud) storage.
Please note that the recent section displays the local and cloud the documents you have open/read recently. Player does not physically move/transfer local or documents to the recent Division of clouds.
Maybe you are looking for
-
How can I make firefox my nrisew I do not know where to go mto
went inti apps and disabled globe is correct THST and I want to fire fox as aid default broser
-
We have a very old Presario, connected to a 4550 old CRT display and we can also find a functional printer with old shaped connectors. There are two USB ports on the back of the tower - could connect us a more modern screen and a printer to this tour
-
Games for Windows Live (GFWL) log: error 80131509
Problem: Unable to connect to GFWL Symptom: Immediate sign in error displaying the error code; «To connect error» Unable to connect. Please try again later. Code: 80131509 " At a couple of old OS (Windows 7 Pro x 64), with all updates. What I tried:
-
How to use SavitzkyGolayFiltering
Hi all I'm trying to find the maxima of crest of a noisy input signal. Using the search returns simple threshold (peaks exceeding a certain width and amplitude) according to some estimates, but I have data that have very broad peaks against the noise
-
application spoolsv.exe error.
I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this. Help, please. *