Video call Tango for Atrix came out :-)

Similar Questions

• TP, video call Cube for the Cube

  Hello world

  I need some advice,

  I have two side;

  First; CCM 6.1.5 + CTMS (Cisco telepresence Multipoint Switch) + Telepresence Cisco 3845 (c3845-adventerprisek9_ivs - mz.124 - 22.YB8.bin) of 1000 +.

  Second; CTMS + TP + CCM 8.5 1000 + 3945 (3900-universalk9-mz. Spa.150 - 1.M4.bin).

  I tried video call on the cube for the cube. I did some configs but will try tomorrow J.

  I need some answers:

  • 3845 router has not mpov, mpov it mandatory for cube calls?
  • 3845 router is it need license for cube?

  Here's the configs;

  3945 router config-

  voice, send rtp-received

  !

  voip phone service

  allow sip to sip connections

  Fax protocol t38 ls-redundancy hs 0-redundancy help 0 no

  SIP

  binding control source-interface GigabitEthernet0/0.21

  bind media source-interface GigabitEthernet0/0.21

  offer-early forced

  !

  voice class codec 1

  Aacld of preference profile 1 Codec 1

  Profile of h264 codec video 2

  !

  !

  interface GigabitEthernet0/0.21

  encapsulation dot1Q 21

  address IP CUBE3945 I_WANIP

  !

  !

  IP forward-Protocol ND

  !

  IP http server

  no ip http secure server

  !

  !

  !

  !

  aacld profile 1 codec

  fmtp "fmtp:96 profile-level-id = 16; streamtype = 5; mode = AAChbr; config = B98C00; sizeLength = 13; indexLength = 3; indexDeltaLength = 3; constantDuration = 480.

  !

  !

  Codec h264 profile 2

  fmtp "fmtp:112 profile-level-id = 4 d 0028; apors-parametersets = R00AKAmWUgDwBDyA, SGE7jyA =; radio-mode = 1.

  !

  !

  Dial-peer voice 1 voip

  Description to_CCM85

  service logon

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  session protocol sipv2

  session target ipv4: CCM85_IP

  incoming called number 10...

  codec voice-class 1

  DTMF-relay rtp - nte

  !

  Dial-peer voice 2 voip

  Description to_CCM615

  service logon

  destination-model 7...

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  session protocol sipv2

  session target ipv4: 3845cube_wanIp

  codec voice-class 1

  DTMF-relay rtp - nte

  !

  3845 router config-

  voip phone service

  media stream-autour

  allow sip to sip connections

  SIP

  binding control source-interface GigabitEthernet0/1.21

  bind media source-interface GigabitEthernet0/1.21

  offer-early forced

  !

  !

  !

  voice class codec 1

  Aacld of preference profile 1 Codec 1

  Profile of h264 codec video 2

  !

  !

  !

  interface GigabitEthernet0/1.21

  encapsulation dot1Q 21

  address IP CM6_wanIp

  !

  aacld profile 1 codec

  fmtp "fmtp:96 profile-level-id = 16; streamtype = 5; mode = AAChbr; config = B98C00; sizeLength = 13; indexLength = 3; indexDeltaLength = 3; constantDuration = 480.

  !

  Codec h264 profile 2

  fmtp "fmtp:112 profile-level-id = 4 d 0028; apors-parametersets = R00AKAmWUgDwBDyA, SGE7jyA =; radio-mode = 1.

  !

  !

  !

  Dial-peer voice 1 voip

  Description to_CM8

  service logon

  destination-model 10...

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  codec voice-class 1

  session protocol sipv2

  session target ipv4:3945_wanIp

  DTMF-relay rtp - nte

  !

  Dial-peer voice 2 voip

  Description to_CM6

  service logon

  RTP payload type cisco-codec-fax-ind 110

  RTP payload type cisco-codec-aacld 96

  RTP payload type cisco-codec-video-h264 112

  codec voice-class 1

  session protocol sipv2

  session target ipv4:CM6_IP

  incoming called-number 7...

  DTMF-relay rtp - nte

  !

  Best, thank you...

  Barris salvation,

  Try adding the following configuration:

  voip phone service
  RTP ssrc multiplex
  address - hide
  allow sip to sip connections
  SIP
  midcall-signalling passthru
  tcp transport session
  passage of Header error-passthru
  amp content sdp
  rel1xx disable

  Thank you

  Paul

• SAMSUNG GALAXY Y video called for SKYPE?

  Hi guys,.

  I just want to know if SAMSUNG GALAXY is supports video calls on Skype? Please help me on this. Thank you.

  Android (Google Play) market shows suported video call Skype for Android Samsung Galaxy Y:-2.3.6 (Gingerbread). But in fact it only supports voice calls. The reason is that Galaxy Y has no front camera and 832 MHz processor (low speed). But I must say the quality of voice calls and experience is pleasant. I share information on voice calls based on my experience of call Skype Voicemail with 2G network.

  Kitenge
  Developer | Technology Evangelist
  kperisetla.blogspot.com | http://kartikp.WordPress.com | http://www.Facebook.com/Kartik.peri

• I've upgraded to IE9, how can I improve the quality of my picture of the webcam for video calls?

  I've recently updated to IE9.  The quality of my web cam image is dark and resolution of RL is unrecognizableand similar to the shadow.  How can I improve the quality of the image during video calls, for example over Skype or yahoo?   I have a Toshiba door 'ge'.

  Hello

  1. What is the number of brand and model of the computer and the webcam?

  2. What is the operating system installed on the computer?

  Try to uninstall then install web camera drivers and check if the problem is solved or not.

  Uninstall or change a program

  Note: this article applies to Windows Vista and Windows 7

  Also check out the following link:

  http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly (Applicable to Windows Vista and Windows 7)
   
  Let us know if the problem is solved or not.

• Start a video call is grayed out in Live messenger

  With the help of Live Messenger 2011 (build 15.4.3502.922). To start a video call is greyed out, but the camera is seen if I go through the audio and video Setup. I can also receive a video call by someone else and the camera works fine. Using the Microsoft Lifecam Cinema with the current drivers. Imagine what we could be... If we could imagine. Daniel A. Galant

  Hi Daniel,.

  The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.

  http://windowslivehelp.com/solutions.aspx?CategoryID=07042916-d29c-4cac-8657-e700a4866c47

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• What does PS vs HQ for the cam action SONY in video resolution?

  What does PS vs HQ for the cam action SONY in video resolution?

  in AS100 - nothing. It doubles the framerate - 60-30 NTSC and PAL of 25-50

• Why should I use a 3rd party for video calling?

  I downloaded the latest version of Skype, and he says that I use for Skype BtvStack.exe. It cannot make video calls to my office. How can I change this! Thank you.

  Thank you very much! It fixed my problem!

• No camera or share a video call on my iPhone 5.

  Hello
  
  Me and a friend tried to start a video call on our iPhone 5. We all have the latest version of Skype, but I can't share my video, just my friend. I see my friend perfectly, but my friend can not. I first thought that maybe FaceTime should be turned on, because my friend has it. But he seems to have nothing in common. I also tried to toggle camera during the video conference session when it's on, but the camera does not illuminate. Typed on/off camera, but nothing happens. I am naïve and I really want this to work. I appreciate any suggestions!

  Hi there, you can do one of the many things... If you see your sef on your screen then the problem is probably the end of your friend, if you do not see yourself try to switch to the rear camera and see what happens, if it does not work try to use facetime to reach your friend and put end facetime and Skype.

  If this does not uninstall Skype and reinstall.

• Skype is the best software for video call

  Skype is the best software for video call

  I want your opinion please answer Yes or no

• for video calls

  Hi I have an alcatel 985n 800 MHz prosesser 2.3 Android mobile phone. I give the floor only phone calls. do not see the video option in the option. pl me advice what I do for face-to-face video calls

  Nice

• Someone at - there a way for me to open an IFO file, so I can copy it? I shot a video on my Hitachi DVD camera and need to change.

  Someone at - there a way for me to open an IFO file, so I can copy it? I shot a video on my Hitachi DVD camera and need to change.

  Hello Mjcj1,

  Thank you for your message.  To change an IFO file, you'll need 3rd party software.  Click HERE for an example.
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I can't invite a contact to view my camara for a video call

  My loptop has a web camara but when I wanto, make a video call, I can't used to leave me one icon it shows this is a messege video don't know why?

  Hello

  I suggest you try to update the latest drivers for the webcam and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• How to fix my webcam for video calls on Skype

  I need help to fix my built in webcam for Skype video call

  Hello

  Because the problem is with Skype I suggest you contact the Skype support team. However, you can have a look at the following articles that might help you.

  To make a video call

  http://www.Skype.com/intl/en-us/support/user-guides/video-calling/

  Video calling

  https://support.Skype.com/en-us/category/VID_CALLING/

• No sound for video calls

  During a video call through Windows Live Messenger, I can see and here the other party, however, the other party can see me but not here me.  I have a Dell laptop Studio 17 (1727).

  Thank you for visiting the Microsoft answers community site.

  The question you have posted is related to Windows Live Messenger and would be better suited in the Windows Live Solution Center.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/forums.aspx?ProductID=2

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Requirements for video calls between two companies with Ex90

  Hello

  where can I get information in the order two video calls Ex90 defined between the two companies, each company has its own server CM 8.6 and Ex90 phones.

  for the momment I know just we need video communications server, but I would like to get info on how about Communications Server config and whether a specific config is required in CM server.

  concerning

  If we assume that both companies want to stick to a Cisco solution, then you will need to use a control VCS Cisco and VCS Expressway (VCS-E). You can also remove this with a solution of VCS StarterPack (according to the needs for scalability and other design objectives). The two entities should have a solution in place.

  At a high level, you would have a SIP trunk of the AAU to VCS. VCS has a relationship of peering with VCS-E and the VCS - E is sitting in your public DMZ. The VCS-E to Cust A can communicate with the VCS-E to Cust B. You can do this in fact through a peering model (commissioning on both devices of VCS - E) or you can simply use DNS and URI component to facilitate the call installation introduction.

  You will of course face the network aspect (IP addressing, the rules of firewall, etc.). You need a coordination "numbering plan" according to which (if any) the URI dialing rules have been established by organizations. With versions of the CUCM prior to 9.x, you shouldn't that numbering URI has a little support limited. CUCM 9.0 adds some improvements of numbering URI. Not that you must be about 9.0 or version later to do what you want, just that you have a different set of parameters to function as with the pre - 9.0 version.

  The above is pretty generic, but it can give you a point of reference to start with.

  HTH.

  -Bill (http://ucguerrilla.com)