Justify last left - aligned line problem

Similar Questions

• BUG: Theme 25 pairs value attribute - model left-aligned report

  Theme 25 < b > value pairs attribute - model of left-aligned report < /b > definition before lines contains the substitution string "< tt > #REPORT_STATIC_ID # < /tt >:

  <ul class="vapList tableBased" #REPORT_ATTRIBUTES# id="report_#REPORT_STATIC_ID#">

  Must be < strong > "< tt > #REGION_STATIC_ID # < /tt >" < facilities >:

  <ul class="vapList tableBased" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#">

  Published by: fac586 on April 30, 2013 10:45
  
  Bump

  Thanks for posting on this bug, Paul. This is certainly a bug and I connected in our internal system of bugs so that we can monitor and fix it for the next release.

• Kerning in a left-aligned text column

  How do you get the text to go to the right-hand side of a text column when you have a left-aligned paragraph? When I adjust the tracking/kerning there seems to be a right auto dash that I can't work on the deletion of about 5mm.

  Image attached, shows what I mean... I want the first line to go further in all, but he's not going past the guide I put in place.

  

  Two possibilities: either you have "Lines balancing ragged" enabled (which will try to make each line the same length), or it is caused by the paragraph composer (which attempts to balance the amount of white space at the end of each line).

  Solution # 1: clear the balance of the jagged lines.

  Solution # 2: use the single line composer - who will fill each row until the scope before continuing with the next and the right side will not be as well inconsistent as it is now.

• Facebook ask for enable cookies when I already did. Page is white and blue just link on the left-aligned words.

  Facebook appears on white background and text, some with links left alignment.

  allowed, history, cookies, cache, everything I searched on google.

  cookies are already enabled.

  all other websites are ok except fb.

  pls help.

  Apparently, facebook could have updated their ads stuff that make my anti-ad on my phone does not not with facebook. fuck Facebook.

• Line problem vertical screen satellite 3000

  my laptop is Satellite 3000, it had vertical line problem now, I want to use an outdoor screen tube to replace the current damaged LED screen.

  I tried to use the swap FN + F5 key, but it's still doesn't work, I tried to log into the system to check, ((windows xp) system is normal), but I don't see anything because the screen is black, it will not be in the system even if I have in connected to the local network, because the configuration of mobile network function is forbidden to communicate with the internet , (I ghost before it has completely damaged), the question is:

  1, I have to configure something so she may use it outside the screen in windows XP? or just use the FN + F5 swap button?

  2, how am I going to do next step if I want to use the external screen?

  thx a lot

  Hello

  the first question you should ask is, if the machine works really well. This means that all THE drivers are installed and so on.
  The other thing is:
  When you connect the external monitor to your computer, you see something while turning on the machine? (Logo of Toshiba, Windows XP start screen, etc.).
  Usually, you should be able to work on an external display, and if all drivers and tools (such as FN + F5-> change device display tool) are installed, then the "display" button should be possible.

  Please answer and describe if you see something that we can do some better troubleshooting.

  Welcome them

• I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months. But since August the year last, I am facing problem and my device hung on several occasions.

  Dear Sir, almost a year I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months, I go to 8.1 and it worked very well. But since August the year last, I am facing problem and my device hung on several occasions. I restored the device, I tried to restored on the plant but no help. Is it possible if I replace win 8 for windows 7 because I feel very uncomfortable.

  Thanks & best regards,

  Hassan jamal Shah

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Muse of the drop down Menus - how LEFT align?  Everyone?

  I have a menu via the menu widget and I want to left-align the links in the menu dropdown.  This works if you set the menu on 'One size' option, but does NOT work if you set the menu on "uniform spacing.

  The button Align left does not work (only if a uniform spacing is chosen).  There must be a way to left-align the submenus, right?

  I searched the forum, and it was not a solution.

  Can anyone help?  I really need my submenus left-aligned.

  Thank you!

  -Brian

  You can try selecting the text element, and then via the text panel use dash.

  Thank you

  Sanjit

• Paragraph on top of left-aligned paragraph Center

  Hello

  My question is relatively simple (I think) that I'm sure was answered here before I can't answer because I don't know how it the phrase in the search.

  In Dream Weaver, in design mode (don't know anything about HTML), I need to make sure there is a highlighted title "BOLD" directly above a left-aligned paragraph (no space between the two).

  What is the best way to achieve this? Everything I do it seems to group the title and paragraph together and align the same.

  -KiSS

  Not being able to work with HTML and CSS code is a huge obstacle to the success of your projects.

  I invite you to spend a weekend of basic learning.  You'll be glad you did.

  • http://www.html.NET/
  • http://w3schools.com/
  • http://www.csstutorial.NET/
  • http://phrogz.NET/CSS/HowToDevelopWithCSS.html
  • http://webdesign.tutsplus.com/sessions/Web-design-theory/

  Inline CSS used here by opportunism.  Ideally, these styles go inside your stylesheet.

  style = "margin: 0;" padding: 0; text-align: center; text-decoration: underline"> This topic is centered.

  This paragraph is aligned to the left

  And here's what it looks like:

  

  Nancy O.

• Left-aligned wrapping lines of text in lists

  I use RH9 on fully patched Windows XP.

  I'm having a problem a bit of tinkering with formatting finalize lists imported from FM. It took me a while to get the FM source book lists to import correctly, but now I have enough clean, except when the text in the lists is adjusted.

  Currently, if there is a second line that wraps, he justifies with the list item (number, letter, bulelt, etc.) on the left. However, I would like that it be justified to the left with the first sentence.

  I managed to fix this easily for programming natively in HR by adjusting the multilevel list styles. But I'm not clear on how to do it with the style of FM mapping > HR.

  I am mapping the original style of the FM to a HR paragraph style and indicating in the mapping of properties to "Convert AutoNumber RoboHelp list." I see the ability to change the properties of the list in the style of paragraph HR that I maps, but it does not go as deep in terms of the options as multilevel list style change dialogue. I know that you can add the paragraph with a multilevel list style, but it was such a nightmare to get this working as it is, I am remiss to do anything without some direction.

  Thanks in advance,

  Douglas

  Went ahead and should have followed my instincts with Binder the paragraph style to a multilevel list style. This method works.

• Divs in fluid grid div suddenly not left-align, right-most on each line travel down again

  Hey everyone, I need help! Last night my site worked perfectly well, and somewhere along the way, I made a change so that I can 't understand. There are all the divs on my site, the first two of the three are always aligned horizontally, but the third and last div is pushed back down again once. What baffles me the most, is that it is somehow changed on every page of my site, not just one, I'm working on. Could someone tell what could have caused it? As well, it seems still exactly how I want it to look mode live view, but as soon as I load in a browser, it is inconsistent, and I tried it in all major browsers with the same result. The body of the pages seems to be fine, it's only the divs that are crazy. I'm sure it's to have something to do with changing margins, but I don't know what part needs to be changed or what to put too exactly.

  King Karl wrote:

  What baffles me the most, is that it is somehow changed on every page of my site, not just one, I'm working on.

  Karl, this is expected behavior when you use a remote CSS style sheet that is linked to all of your HTML pages. While you can have your attention on an HTML page, any changes you make to the CSS will apply immediately to all pages using this CSS stylesheet.

  In rare cases where you want to apply a PAGE only FOR ONE single CSS rule, Insert rule in a style block in the head section of this page only, or you can even use a style inline on the unique element.

• Why FireFox looking for 'Chrom '.... "when I close the tag (last) left and report ' can not open...? I missed an option that it would send to my hom

  If I close the last tab (on the left) to go back to my office, firefox attempts to load the reports to me that it cannot find the server and google Chrome.

  Apparently, I missed an option in the help section that prevents this. Any ideas?

  Hello

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Image with my .iagonal 6 d line problems.

  Hello, my name is Lindy and I'm new to this forum. I had a problem with my Canon 6 d which translates some of my images appear with a diagonal black line in the upper left corner. I have seen this problem with my L 100mm lens and my 16-35mm lens. If anyone has had this problem before or have any idea what can be wrong?

  Thank you!!

  Hi Lindy.  You have a little 'dust' on your sensor (only in this case, it looks like a little hair).

  It is easily fixed.

  See page 279 of your manual owner who describges how to clean the sensor.

  I do, however, is recommended that before making an automatic cleaning cycle, you remove the lens and point it at the ground - it's that this bit of hair has a place to go when she falls... other than to find another location inside your camera.

  After cleaning, punch the camera a plain white wall (or ceiling) and take a photo (it doesn't even have to be developed).  Dust looks better to the high apertures (it'll be more blurry at the bottom diaphragms).

  Sometimes automatic cleaning is not sufficient and you need to do something more.  If this is the case, then see page 283 for "manual sensor cleaning.  This simply causes the camera to turn off the sensor, but open the shutter (and keep open) so that you can inspect and clean.  If you look inside, what you REALLY see are the two filters in front of the sensor.  The before filter is one that vibrates (using a piezoelectric effect) to "shake up" loose dust.

  I use a variety of techniques... the easiest and safest is to use a fan simple hand - squeeze (bulb) as a Giottos Rocket Blower.  I recommend that you use no compressed air cans, because the liquid propellant in the boxes can spray if the can is shaken or not held perfectly level and that leaves a residue on the filter (and the only way that come out is to wet - clean the filter).  Even air compressors spray water and oil.  A hand blower pressed is the safest option.

  If this does not work, I use a small, extremely soft brush.  They do actually brushes that plug in to release static electricity so that if something is stuck because of the electrostatic control will be released if all goes well.

  If this does not work, I use a range of sensor to inspect my sensor and get a better understanding of why he won't not always free (because usually there now) and wet then clean the sensor using photographic Solutions sensor swabs 'brand' and 'Eclipse', cleaning solution.  The solution is almost pure methenol which means it evaporates quickly and leaves no residue.

  My guess is a simple manual cleaning (with the camera pointed at the ground) - or - a hand blower pressed will probably do the trick.  If you use a brush, give this brush some good solid shots on the edge of a counter or table to shake the dust that could be on the brush - because you do not want to add to dust on the sensor you're trying to blow that hair.

  More 'real' camera records (company mainly to sell stores and material service photo - not large areas that are also sell cameras) offers sensor cleaning, but there is usually a charge related to that.  It is pretty easy to learn how to clean the sensor (which is why Canon has a section in the owner's manual) and it is something photographers have to do... only occasionally.

• Dell E1914h little black line problem

  Monitor Dell E1914h I have two problem has first the driver is not installed and showing the error shown in the picture, there are small black line on the right side of the screen, as shown in the last two photos below.  I have the solution to these problems as soon as possible?

  

  Hello

  Thanks for joining us.

  Let me answer your questions one by one

  1. the error message on the driver could be due to the compatibility of the OS, just checked the drivers available, there is no driver for Windows XP I see is the operating system you are running.

  You can close the popup and continue to use the PC as I do not expect the instructor to stop working without this driver.

  2. the downside seems to be a task or dead pixels. You can try this monitor on another PC or another monitor on this PC to confirm the problem is with the monitor.

  The fix for the problem 2 is to replace the monitor. Dell monitors to go with the standard warranty of 3 years. If during the warranty period, we can cover this issue.

  Thank you

• CP1525NW 2 sides print alignment Page problems

  Hi all.

  I recently "upgraded" color laserjet CP1215, in a CP1525NW.

  Many images color 2 faces (dvd booklet) removable, to print on 32lb Hammermill Color Laser glossy (using the Type of paper for HP Glossy presentation).

  Aside from the occasional minor skew, the old CP1215 was enough spot - one when he came 2-sided printing.

  The new CP1525NW... isn't.

  Now, the book images are technically landscape, but because the printer feeds the paper in a portrait orientation, I will be describing the portrait SEO problem.

  When printing images, they are set to be centered on the page.

  However, when it actually prints, the margin (the first edge coming out of the printer) superior of the printed side is clearly superior to the bottom margin.  So the images on each side do not align correctly... pretty much a difference 0.25 "or so.  Left and right margins seem perfect, give-or-take the usual teensy bit of obliquity.

  I printed more than enough to know that this alignment is 100% compatible, even on different types of paper and different software.

  It seems to me that he is clearly a hardware or driver problem.

  Possible workaround I tried turning one of my images before printing, so that I must return the orientation of page around before recharge of the sheet.  This actually fixes the alignment of up/down (and also just confirmed the consistency of the problem)... BUT... It also showed that the left/right alignment was not as centered as it appeared.  The difference does not seem to be * very * bigger than up and down, but is pretty close to the same thing.

  I tried to dig through the properties of the printer, the Toolbox... and I can't find anything that will allow me to adjust the alignment page...

  I was pleased with the quality of overall impression on this model, but if can't solve this alignment problem fairly quickly, this thing will eventually be returned to anything else.

  EDIT:

  Failed to include any other info on my system.

  This forum works on Windows XP SP3.

  The main source of print is Adobe Acrobat, but the problem occurs with everything I print since.

  After having worked with chat support technicians online this weekend thanks to this, I got an email today, which suggests that the use of the print driver PCL more-up-to-date, rather than specific to the model 1 + years driver universal, should solve the problem of alignment.

  Unfortunately, although I strongly suspect that this can indeed solve this problem, I was unable to confirm this.

  My specific situation really need a more immediate solution - as well as the availability of a decent policy hassle [back - I've already turned the printer on the place of purchase and exchanged for a product not HP that could meet the current needs.]

  That being said, I am still very fond of HP products, and I was very pleased with the overall quality of this specific printer, without the duplex alignment problem.

  I have no doubt that this printer will cross my path again in the near future.

• PS JS script image alignment to Center, left-align.

  Hi, I have a PS script that replaces an image layer in the PSD file with an external PNG file. and saves it newly created as a new PNG image.

  
  At the present time, how it works, it aligns the image in the Center within the limits of the previous image.

  What I would like is that it aligns left within the limits of the previous image, instead of Center aligning.

  Here is the code that I use I think the Center aligns the limits-

  
  

  [code]

  pasted_bounds = psdDoc.activeLayer.Bounds;

  flag_width = Number(pasted_bounds[2]-pasted_bounds[0]);

  flag_height = Number(pasted_bounds[3]-pasted_bounds[1]);

  
  

  psdDoc.activeLayer.translate (original_bounds [0] - pasted_bounds [0] + ((original_width-flag_wid th)/2), original_bounds [1] pasted_bounds [1] + ((original_height-flag_height)/2));

  [/ code]

  
  

  Looking forward to the community. Thank you.

  In addition, I miss community PS-Scripts and Mike

  Here's the complete code in case someone wants to watch-

  PS it also replaces a text image using list1.txt, which works very well and I do not understand code for it.

  [code]

  var repertoire_de_travail = "" / files/work-C / ";"

  var image_txt = "list2.txt";

  var display_name_txt = "list1.txt";

  //----------------------------------COMMON HOUSEKEEPING---------------------------------------------------------

  var strtRulerUnits = app.preferences.rulerUnits;

  var strtTypeUnits = app.preferences.typeUnits;

  app.preferences.rulerUnits = Units.INCHES;

  app.preferences.typeUnits = TypeUnits.PIXELS;

  app.displayDialogs = DialogModes.NO;

  //---------------------------------------------------------------------------------------- --------

  -GUIDE OPEN PSD FILE-

  guide_file = new File (working_directory + "guide.psd");

  If (! guide_file.exists) Window.alert ("not found guide.psd in the working directory");

  Open (guide_file);

  psdDoc = app.activeDocument;

  flagLayer = psdDoc.artLayers.getByName ("ChangeMe2");

  shapeLayer = psdDoc.artLayers.getByName ('form 1');

  flagLayer.moveAfter (shapeLayer);

  flagLayer.move (shapeLayer, ElementPlacement.INSIDE);

  Window.Alert (psdDoc.artLayers.Length);

  Window.Alert (shapeLayer.Kind);

  for (i = 0; i < psdDoc.artLayers.length; i ++) {}

  psdDoc.artLayers [i] .visible = false;

  }

  flagLayer.visible = true;

  original_bounds = flagLayer.Bounds;

  psdDoc.trim (TrimType.TRANSPARENT, true, true, true, true);

  original_width = Number(original_bounds[2]-original_bounds[0]);

  original_height = Number(original_bounds[3]-original_bounds[1]);

  original_resolution = Number (psdDoc.Resolution);

  original_ar = original_width/original_height;

  psdDoc.close (SaveOptions.DONOTSAVECHANGES);

  -PSD FILE CLOSE GUIDE-

  txtfile_text = new File (working_directory + display_name_txt);

  Window.Alert (txtfile_text. Open ('r')? ('LIST1:OK': ' list the file not found: names ');

  txtfile_image = new File (working_directory + image_txt);

  Window.Alert (txtfile_image. Open ('r')? ("LIST2:OK": "file not found: image list");

  While (pic_file = txtfile_image.readln ())

  {

  flag_name = txtfile_text.readln ();

  File2 = new File (working_directory + pic_file);

  Open (file2);

  var picDoc = app.documents.getByName (pic_file);

  app.activeDocument = picDoc;

  picDoc.trim (TrimType.TRANSPARENT, true, true, true, true);

  flag_bounds = picDoc.activeLayer.Bounds;

  flag_width = Number (picDoc.Width);

  flag_height = Number (picDoc.Height);

  flag_ar = flag_width/flag_height;

  flag_resolution = Number (picDoc.Resolution);

  diff_width = Math.ABS (original_width * original_resolution-flag_width * flag_resolution);

  diff_height = Math.ABS (original_height * original_resolution-flag_height * flag_resolution);

  picDoc.resizeImage (Number (flag_ar) * Number (original_height), original_height, original_resolution);

  } else {}

  picDoc.resizeImage (original_width, ((original_width) Number / flag_ar), original_resolution);

  }

  picDoc.resizeImage (original_width, original_height, original_resolution);

  picDoc.selection.selectAll ();

  picDoc.selection.copy ();

  picDoc.close (SaveOptions.DONOTSAVECHANGES);

  -GUIDE OPEN PSD FILE-

  Open (new File(working_directory+"guide.psd"));

  psdDoc = app.activeDocument;

  flagLayer = psdDoc.artLayers.getByName ("ChangeMe2");

  psdDoc.activeLayer = flagLayer;

  psdDoc.selection.selectAll ();

  psdDoc.selection.clear ();

  psdDoc.selection.deselect ();

  psdDoc.paste ();

  pasted_bounds = psdDoc.activeLayer.Bounds;

  flag_width = Number(pasted_bounds[2]-pasted_bounds[0]);

  flag_height = Number(pasted_bounds[3]-pasted_bounds[1]);

  psdDoc.activeLayer.translate (original_bounds [0] - pasted_bounds [0], original_bounds [1] - past ed_bounds [1]);

  the vertical alignment

  psdDoc.activeLayer.translate (0, original_bounds [1] pasted_bounds [1]); commented 14/01/2009-ISSUE2

  psdDoc.activeLayer.translate (original_bounds [0] - pasted_bounds [0] + ((original_width-flag_wid th)/2), original_bounds [1] pasted_bounds [1] + ((original_height-flag_height)/2));

  [/ code]

  To left justify, using just the first table number in each layer limits:

  var leftBoundsOrig = origLayer.bounds[0]
  var leftBoundsNew = newLayer.bounds[0]
  newLayer.translate(leftBoundsOrig-leftBoundsNew,[enter your code for if you want the height centered here])