Kerning in a left-aligned text column

Similar Questions

• Centered and left aligned text

  I have several blocks of text that contain paragraphs 2 or 3. Paragraphs should be aligned to the left. However, they must also be centered horizontally in their respective text frames (as in the example on the right in the picture below). Each set of paragraphs has different lengths, so it would be tedious to have to change the withdrawal on each of them or to change the tabs for each group.

  Is it possible to do without having to manually position each in InDesign CS4?

  

  Jay fresno wrote:

  Peter,

  A table is a great idea. However, I don't think it will work in this case because of other considerations of page layout. I do a provision which consists of frames and text frames. Each photo frame and text block are grouped. On each page, I plan to have a large text frame that contains several groups of executives and executives of text. In the image below, there are 9 groups within a single text block. Large text frames that contain all groups spend another frame of large text on the next page, which also contains group photo series and blocks of text.

  The reason for such a provision is so that a user can insert a new picture/text frame group and all other groups will automatically move to the right. Or, if a group is deleted, all other groups will move to the left.

  On some pages, there will be a different presentation with a significant group in the lower part of the page (as in the lower image). Currently, in the bottom image, there are 3 groups in the top row, and there is only one group in the bottom row that contains 3 sets of groups of photo/image.

  I'm really struggling with this provision. How text aligns is a secondary factor. The main challenge is to know how make it easy for the user to insert and remove groups of photo/text frames, so that all groups take as they should.

  I hope I described it is understandable. I am open to any suggestions that will make this easier to use layout.

  

  

  Hi, Jay:

  Images are worth zillions of words, do you not hear?

  I'm not a designer or page layout production guy, so I'm just speculating. If I understand your need to add or remove one or more items from image caption / and I have to fill in other, horizontal threaded frames can operate. For the first page, three horizontal frames, threaded top-right to the center-left, middle, right to bottom-left. Remove any unit and other return flows; Add the entire building and other flows forward - you need for Smart Text Reflow is flowing to a new page.

  Something similar might work for the second presentation page.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Align to the left the text anchor point in After Effect

  Hello. Sorry if this question was very noovy, but I need left align multiple layers of text. So, I want to put my on board left the text anchor point. Because I need to be able to change the text and get the same effect, I would like to place the anchor point on the left edge by using an expression.
  

  I used something like
  

  x = 0;
  

  Y = this.sourceRectAt () .height/2;
  

  [X, Y]
  

  However, small, apparently random offset is throw me off. How can I align my text anchor point to the left edge?

  Thanks in advance!

  Yes... I created a font that has 0 left/right bearings, and it worked perfectly.

• I need to select all the blocks of text in a document and align text blocks in the back pages left frame margin and the text in the pages front to the right margin.

  Hello

  Am new to Java script.

  Can someone help me out here, I need to select all the blocks of text in a document and align text blocks in the pages back to the left margin frames and text in pages recto at the right margin.

  Thank you
  Harish

  Hi Harish,

  Try this.

  var doc =app.activeDocument,
      _pages = doc.pages;
  doc.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;
  for(var i =0;i<_pages.length;i++)
  {
          txfms = _pages[i].textFrames.everyItem().getElements();
          for(var j =0;j
  Kind regards
  Cognet
  		   

• Standard report - left align column not explicitly applied - bug?

  Hello
  
  I think that this post on the forum is very close to what I feel
  BUG: Standard - alignment of the column header problem report
  
  I have a theme which I think was originally based on theme2, using Apex 4.1.1 improved over time to 3.x.
  
  I've created a classic report using the standard template, and I have found that the data remain aligned in Chrome, but centered in IE8.
  
  When I look at the HTML code generated, the align property is added only when the property of the alignment of the column is set to the Center or right.

  <td align="right" headers="COST" class="data">$118.00</td>

  The model column is

  <th#ALIGNMENT# id="#COLUMN_HEADER_NAME#" class="header">#COLUMN_HEADER#</th>

  I would put this in the category "bug", but I understand that this seems to be a specific problem of the browser.
  
  All of the recommendations of the most elegant way fix this using CSS?
  
  Scott

  Scott.Wesley wrote:
  Hello

  I think that this post on the forum is very close to what I feel
  BUG: Standard - alignment of the column header problem report

  I have a theme which I think was originally based on theme2, using Apex 4.1.1 improved over time to 3.x.

  I've created a classic report using the standard template, and I have found that the data remain aligned in Chrome, but centered in IE8.

  When I look at the HTML code generated, the align property is added only when the property of the alignment of the column is set to the Center or right.

  $118.00
  

  The model column is

  #COLUMN_HEADER#
  

  There is a gap. A watch a td (table cell) element and the other a th (table header). Who is this?

  I would put this in the category "bug", but I understand that this seems to be a specific problem of the browser.

  Personally, I'm not really bothered about #ALIGNMENT # and oddities/bugs it. I always use CSS to align the columns (and I use a lot of named column templates where #ALIGNMENT # does not work in all cases).

  The attribute align on all elements of array is now illegal and should not be used. (APEX will have to catch up, but given the lack of attention Oracle gave to the HTML standards in their products over the years, I'm not holding my breath...)

  All of the recommendations of the most elegant way fix this using CSS?

  The elegant CSS to do this is to use an attribute selector:

  /* ID selector for the column header */
  th#COST,
  /* Attribute selector for cells with the header attribute "COST" */
  td[headers="COST"]  {
    text-align: right;
  }
  

  If this does not work in IE8, then a compatibility mode is, or models in the legacy of 3.x theme pages do not contain the necessary rendering trigger Standards mode DOCTYPEs. IE does support attribute selectors in standards mode.

• Presentation of the bulletin, by aligning the columns, paragraph breaks, and lines of text

  Hello

  I've never drawn a newsletter before.

  It's annoying me because I try to be as meticulous as possible with my alignment, but I noticed there are all things that don't align.

  I have a paragraph style, with a space before and after. I have three columns. When I look at a line of text across all columns of three, they are not aligned. May they line up if I had all the text directly and no image wraps, but the envelopes of the image and the beginning of a new paragraph in column 2, throws the alignment in column 3.

  What is the best way to align things with the least possible effort?

  Are there tutorials on good bulletin of the layout-design? Presentation of the grid?

  Thank you

  Stan

  Learn about the starting grids.

  Bob

• Title, title, line-Align multi-column Tables

  File under: trouble Frame, with a little hacky work-around

  In the format of two columns we work routinely, we often need a table that is on the scale of the column, but maybe take in several columns.

  The problem is that the title suite (TableTitle, if used) and never align with the departure of position/title. That's because continuations are starting at the top of the column, while the table itself begins (default "Anywhere") under the anchor line (supposed to be 'in the column' for this discussion)...

  OK, what happens if we change Table > start [Basic] table designer to:

  • Top of the column: Oops, which becomes the top of the Next column, leaving the anchor text column-widower (but it gave me an idea).
  • Top of the Page: Oops, who becomes top of the Next page, leaving the anchor text page-widowed.
  • Float: no effect

  OK, what happens if we change the anchor text Format > paragraph > Format by Designer [paging] to:

  • [Paging] in all of the columns (AAC): Oops, table appears only in the left column on all pages, or;
  • Spacing between lines, including negative and space [base] values seems to have no effect. Using a tiny police only minimizes the problem and he's not healing.

  I thought that I had found how to solve this problem at some point, but did not remember it. I'm writing this in part to seek a simpler solution. Web research has found only one candidate, solid solution, and it was, of course, 404. Perhaps chassis versions have at least the FM7/Win and FM7.1/Unix that I regularly use improvements to this address.

  We normally just to work around the problem by using an AAC format and a table that spans the page, with a gutter of fake Center, simulating a stream of multiple column. In a recent case, I wanted a real wide single-column table of length variable (due to the conditional lines and expected future growth), but I wanted the items to align columns. The table raised on one page, which is a limitation of the next cut.

  Hack: This example requires a text block and page 2-column normal which is 7.5 in wide with a gutter in 0.24 (3.63 in. columns) and a table do not require more than one page. It works for both the provisions 3 and 4 columns.

  1. Use an AAC anchored text frame line.
  2. Create a frame of width (7.5 in.) anchored full page (which may be low, the top of the pass, as you wish).
  3. Create a block of text inside the anchored frame. This framework is:
     one more than your standard page (3-column for this example)
     Same size gutter (0.24 in. for this example).
     Initially pull the block of text to fit inside the frame anchored, so you can get it easily.
  4. Make sure that the default paragraph format (anchored table) of the first column is "in the column".
  5. Use graphics > properties of the object to set the text block inside:
     The value of width: your total width of the text frame standard most 1 column and 1 gutter (11,37 in. for this example).
  
  Set Offsets: from 0 to 0 (this will push the column at the right out of sight for the moment).
• Insert your table as soon as the text table anchored inside the text frame.
• In the table designer, the value Start: top of the column (this pushes the table beginning in column 2).
• Select the internal text block again.
  The value offset: left: negative column + a gutter (in-3,87 for this example).
• Now, the table seems to start in the page one column and flows to the additional columns with the alignment of the position.

It worked perfectly for my recent requirement. In fact, I used a 3 columns (4 real) for the block of text inside the anchored frame. A bit of math is required, sorry .



> ... a table and column that spans more than one column...

> Not quite--I have a table of unique, equal or less than a wide column column,
> flowing (continuous) in several columns.

That's what I meant... but misspelled "covers" instead of "flow".  Oops... I just noticed a mistake. To the step #2, I said give a table a value space above 12.0 pt. There should be a negative space above (pt-12,00).

Above is an example of a view of what I get.

• Facebook ask for enable cookies when I already did. Page is white and blue just link on the left-aligned words.

  Facebook appears on white background and text, some with links left alignment.

  allowed, history, cookies, cache, everything I searched on google.

  cookies are already enabled.

  all other websites are ok except fb.

  pls help.

  Apparently, facebook could have updated their ads stuff that make my anti-ad on my phone does not not with facebook. fuck Facebook.

• Muse of the drop down Menus - how LEFT align?  Everyone?

  I have a menu via the menu widget and I want to left-align the links in the menu dropdown.  This works if you set the menu on 'One size' option, but does NOT work if you set the menu on "uniform spacing.

  The button Align left does not work (only if a uniform spacing is chosen).  There must be a way to left-align the submenus, right?

  I searched the forum, and it was not a solution.

  Can anyone help?  I really need my submenus left-aligned.

  Thank you!

  -Brian

  You can try selecting the text element, and then via the text panel use dash.

  Thank you

  Sanjit

• Is it possible to use tabs to align text right in Muse, as you can in InDesign?

  Can I use tabs to align text right in Muse, as you can in InDesign?
  I have a beauty treatment, followed of a prize and I want to right-align the price, keeping the treatment to the left of the text box.

  Thank you!

  Tabs are not supported by the real browsers.

• Paragraph on top of left-aligned paragraph Center

  Hello

  My question is relatively simple (I think) that I'm sure was answered here before I can't answer because I don't know how it the phrase in the search.

  In Dream Weaver, in design mode (don't know anything about HTML), I need to make sure there is a highlighted title "BOLD" directly above a left-aligned paragraph (no space between the two).

  What is the best way to achieve this? Everything I do it seems to group the title and paragraph together and align the same.

  -KiSS

  Not being able to work with HTML and CSS code is a huge obstacle to the success of your projects.

  I invite you to spend a weekend of basic learning.  You'll be glad you did.

  • http://www.html.NET/
  • http://w3schools.com/
  • http://www.csstutorial.NET/
  • http://phrogz.NET/CSS/HowToDevelopWithCSS.html
  • http://webdesign.tutsplus.com/sessions/Web-design-theory/

  Inline CSS used here by opportunism.  Ideally, these styles go inside your stylesheet.

  style = "margin: 0;" padding: 0; text-align: center; text-decoration: underline"> This topic is centered.

  This paragraph is aligned to the left

  And here's what it looks like:

  

  Nancy O.

• Left of the columns

  Hello
  
  I tried property setting of alignment to left for a column of table (number and Date columns) in rtf but still good aligned in the excel output.
  I tried both ways:
  (1) setting the property Left in MS-WORD (rtf)
  (2)..? Ss alignment: Horizontal = 'Left' ss:Vertical = 'Left '? > coding like this
  
  Y at - it something wrong, can someone let me know what I did wrong by setting the alignment on the left of a column?
  
  
  Thank you
  Ratan
  
  Published by: 808712 on January 17, 2012 19:07

  Please use it in the corresponding columns

• Alignment of columns

  I have a document in Word that has different heading styles.  In DSM, the document is a single column.  I send the document in the ID that is set up for a three column layout. The lines of text align more column to column:

  

  How talented ID people to deal with this?  Should I get rid of the styles and recreate their ID vertically spacing that will equalize or what? Someone smarter than me who uses every day ID for long documents must have understood something.

  Thank you very much.  BTW: so far, Adobe guys, this version is excellent compared to the first, which was good for people to design short documents, but did not have a lot of people like me who create longer.

  It is the position of the baseline of the first line of text in a frame. You can find it in the text frame Options dialog box.

• Problem of matrix report with model RTF - text columns

  I have problem with matrix necessary report...

  I did it before using the pivot function in rtf export then the stylesheet xsl fo... model

  My problem here is in this case, the desired column (value - the center column) is the text column, and the pivot is based on the aggregate (sum or count) function that I don't want in my case.

  Attached my XML, and sample to in the excel sheet...

  and to understand the business, it's for quality module in EBS... The user can take 3 samples in the same sample for the same item, I want to show the name of tests alongside its results grouped by the number of the sample.

  any help would be much appreciated...

  This can be achieved through custom PivotTable.

  I created the RTF template for your condition.

  PFA (model and output)

• Copy of Acrobat Reader text columns

  I know that you can use the ALT key while selecting a text box with the mouse and therefore manually copy and paste the player text columns in separate columns of text in Excel, but it's quite tedious.

  Highlighting a section in an entire page that is displayed as columns and then paste into Excel will most likely result a single column with all the text in a line in a single cell. Text of the columns is separated by a space instead of a tab or a coma.

  Player is clearly able to format text in columns on the screen so that the information must be stored in the file so that it can interpret the provision in such a manner.

  Then why can't I copy that it's on the screen and paste into several columns of text in Excel?

  I did several searches on this and have not met anyway to do this using the player.

  There is no such thing as spaces or "column breaks" in the PDF files. Each word, each character, you see is placed on the page regardless of everything above. When you export to Excel (or any other format) attempts of application of "guess" what the file structure should be and convert it into a usable format, but it does not always succeed because it is an extremely complex operation and there are a lot of factors involved.

  For example, the spacing between the columns in the screenshot above is not the same. Whose to say that the text in the second column is not actually part of the third, because they are very close to one another? To the human eye, it's easy to see that they are separated because there is a line between them and because the second column contains numbers and the third argument contains text, but for a computer algorithm which is a very difficult decision to come to.