JVM 104 only on Simulator 81xx

Similar Questions

• JVM 104 - Illegal Argument Exception (wait, what?)

  Friends and enemies,

  I am the developer of a BlackBerry app that works very well for over a year.  All of a sudden, I'm going to run the Simulator, and I get an exception error Uncaght JVM (not on the launch, but medium-term), specifically, the JVM 104 illegal Argument Exception.  I did not any changes to the code in > 3 months, my last run of the application on the Simulator was a week ago.

  This is where it gets crazy... If I create a new project in Eclipse using the code EXACT EVEN the above request, the Simulator works perfectly.  What could have happened to my configuration of a project that builds an illegal Exception of Argument?

  I ran clean.bat on all my simulators. The only change I made on my test machine is to install Adobe Photoshop CS5 (shouldn't really affect anything).

  All the world has already seen this problem?

  Help, please

  JRT

  Oudu a few hours and several breakpoints, I found the problem. Apparently, update a GaugeField using .setValue (int) can throw an Exception of the illegal Argument? But only once a year. I don't know why it was a problem now, the code has been stagnant...?

  SOLUTION:

  try {}

  Update GaugeField

  }

  catch (IllegalArgumentException foo)

  {

  }

  BOOYA! FTW

• JVM 104 Exception on GaugeField progress implementing?

  Hello

  I use Eclipse for Java in BlackBerry plugin. I am fairly new to BlackBerry App development. I am trying to create a GaugeField that will show how to complete the year, nothing complicated. When I try to build the GaugeField with a variable as the percent it gives me "JVM 104". I tried to use setValue instead, but it gives me the same result... Any ideas?

  Thank you

  Ben

  Here are two examples of what I do, I put end to 50 for example.

  int Completion = 50;GaugeField percentGauge = new GaugeField("Percent: ", 1, 100, Completion, GaugeField.PERCENT);add(percentGauge);
  

  int Completion = 50;GaugeField percentGauge = new GaugeField("Percent: ", 1, 100, 0, GaugeField.PERCENT);percentGauge.setValue(Completion);add(percentGauge)
  

  The debugger gives you a "trace of the stack", which lists all the different methods that were called.  look towards the bottom of the list, that it gives you and you should understand which statement in your program has caused the problem.

  I wonder if you must set the minimum value of 0, to use it as a percent.

• Eception error 104 lifting on Simulator using catch (Throwable)

  
  

  This is the expected behavior when you use the BlackBerry Smartphone Simulator (to help identify potential problems).  Catch throwable may result in FMV 104 errors.  You can catch the Exception or error instead, which does not trigger the error of the JVM.

  This should not happen on a real Smartphone BlackBerry.

• JVM 545 error on Simulator 9950

  Hello

  Is there a quick fix for the JVM 545 error when I run the debug in the Simulator?

  Thank you

  have you tried runing "clean.bat" and erase the storage?

• Is it possible to buy Tecra A8-104 only with Linux as main OS

  Is it possible to buy the Toshiba Tecra A8-104 with Linux preinstalled, or without any OS? I like to use for the majority of free software, but I wouldn't pay for Microsoft OS.

  Hello

  AFAIK in the EMEA region (Europe, Middle East and Africa) something like that is not possible. I'm not 100% sure, but something like that is possible in the United States.

• only parts simulation

  I have a pretty complex circuit that contains a number of pieces that are there to allow the appropriate simulation (they create "external stimuli").

  How to mark all of these pieces so that they will NEVER be exported in the NetList.   I really don't want to remove them manually before going to the configuration of PCB, as if I should never need to review the design, I would need to remember what they were and re-add-the.

  This seems obvious, but I can't find it easily.

  TIA

  Dave

  Nevermind - I figured it - just put the imprint of the empty room.

• SE NetConnection.Call.BadVersion only in Simulator

  I have a small prototype application that pulls a few database on a MySql database via PHP using the ZEND libraries.  It works very well in the AIR on the desktop, but this dialog box is displayed in the Simulator:

  Send failed

  Channel.Connect.Failed error

  NetConnection.Call.BadVersion::url:

  'http://localhost:80/Map-debug/gateway.php '.

  The program is going very well, but does nothing with the data that I tried to recover.  When I watch my c:\XAMPP htdocs directory, I see map-debug/gateway.php here along the coast the swf so I know the desktop AIR properly there.   When I look at the content of the .bar file, I see the gateway.php file in the same directory as the swf file.

  Bright ideas?

  The URL, it tries to connect to is localhost, which is not going to work. The PlayBook is running in VMware and should be considered as a separate computer, it has its own IP address. Your server is obviously not the PlayBook itself.

• Is it possible to indicate an application runs only on Simulator?

  Hello

  I am developing an application running on a simulator, so that it can avoid the code signing.

  How to indicate in build.xml when bb-ant-tool?

  Thank you.

  as mentioned in the main() jonberry, you can check...

  if(!DeviceInfo.isSimulator())
      return false;
  

• Error JVM 104, size of the cod file...

  
  

  problem solved,

  I change the code with netbeans and prverify and compile it with JDE.

• Runtime Exception while simulating sms send device/network CDMA

  I'm trying to simulate the sending of a sms of my application. Since the device during the simulation simulates CDMA network, I use DatagramConnectionBase to send sms.

  Whenever my application tries to send a text message it throws JVM 104 error: Runtime Exception.

  I use Eclipse to develop the application and we tried to simulate this on different Blackberry JDE pluggins, including v5.0, v4.7.0, v4.6.0 and the result is always the same. Just this part crashes me to begin to test my application.

  Thank you.

  The section of the code of the application that sends sms is:

  DatagramConnectionBase _connection = null;
  DatagramBase _sms = null;
  Try
  {
  _Connection = (DatagramConnectionBase) Connector.open ("sms: / /: 0");
  _sms = (DatagramBase) _connection.newDatagram (_connection.getMaximumLength ());
  _sms.setAddress ("sms: / /" + _mobileNumber);
  _sms. Write (_smsContent.GetBytes (), 0, _smsContent.getBytes () .length);
  _Connection.send (_sms);
  _Connection.close ();
  }
  catch (IOException e)
  {
  System.out.println ("' sending Txt Message on CDMA network Exception:" ")
  + e.getMessage ());
  }

  OK... I found the way to make it work.

  Thank you all.

• bb10 Simulator in chrome still exist?

  There's only native Simulator http://developer.blackberry.com/html5/download/

  Simulator of html bb10 (CRX package for chrome) still exist?

  I think I need to download .crx file and add to chrome

  or

  BlackBerry has removed the option of the Simulator in chrome?

  Your comments welcome

  At the bottom of the download page, you can click on the user interface that asks you if you want to access WebWorks 1.0. This will show tools WebWorks 1.0 that includes ripple. That said, we have not updated ripple WebWorks 2.0, so if you have moved to WebWorks 2.0 you will not be able to work with ripple

• JDE Simulator error "reload software: 552".

  Hi, I use Blackberry JDE version 4.7 with Simulator 4.6.0.150 bold 9000. Everything works fine an hour ago.

  It just started to show "reload software: 552" all of a sudden. He have no importance how to start the simulater, JDE debuger, or simply run the Simulator booth along.

  There is a solution to a real device for this error message, but what it means for a Simulator?

  Thanks for your help.

  Chimera

  If you run your 4.7 on a "BOLD" device software, you run the risk of "bricking" of the device, then do not.

  The JDE 4.7 has only a simulator of the storm, because the storm is the only device which manages 4.7 OS.

  If you want to target the "BOLD", then use the 4.6 JDE or more LOW (no more).

• Another question of Simulator

  Hello

  I have a purchase order in my application and when I press the keyboard back button it automatically ask this question

  "Chages made!

  and with the three buttons options

  "Save", "Throw", "Cancel".

  My question:

  1 is happening only on Simulator or a real device as well because at the moment I don't have camera with me.

  2 If yes how can control this message, either stop it or change it.

  1. This will lead also in real aircraft.

  2. to avoid this message override onSavePrompt() in your screen. As:

  protected boolean onSavePrompt()
  {
    return true;
  }
  

  Concerning

  Bika

• Deploy the ADF - BC on different JVM (not a cluster) and update the same row

  Hi experts,
  
  I have a question for the locking of ADF BC. Suppose I have a web application that you want to add using add-British Colombia. And the web service interface is enabled for ADF - BC. In this case, what happens if I try to deploy as follows
  
  Deploy the web application ADF with add - bc on a JAVA virtual machine and the other JVM deploy only the Add-bc with active web service. In this case how the locking of the database will work. Incase if I change the line in the ADF, faces and then try to update the same line using the web service in the another JVM. Framework will lift the ADF line locked by an other user error? Or the locking works only if both are on the same virtual machine JAVA or deployment in the cluster?
  
  Thank you

  It depends on how you define your lock mode to work in British Colombia of ADF - but assuming you are using optimistic locking - it will be work well since the ADF BC lock will check whether the data in the DB has changed and then throws an exception in letting you know on the subject.
  http://docs.Oracle.com/CD/E24382_01/Web.1112/e16182/bcstatemgmt.htm#BABHBIAB