JVM 104 Exception on GaugeField progress implementing?

Similar Questions

• JVM 104 - Illegal Argument Exception (wait, what?)

  Friends and enemies,

  I am the developer of a BlackBerry app that works very well for over a year.  All of a sudden, I'm going to run the Simulator, and I get an exception error Uncaght JVM (not on the launch, but medium-term), specifically, the JVM 104 illegal Argument Exception.  I did not any changes to the code in > 3 months, my last run of the application on the Simulator was a week ago.

  This is where it gets crazy... If I create a new project in Eclipse using the code EXACT EVEN the above request, the Simulator works perfectly.  What could have happened to my configuration of a project that builds an illegal Exception of Argument?

  I ran clean.bat on all my simulators. The only change I made on my test machine is to install Adobe Photoshop CS5 (shouldn't really affect anything).

  All the world has already seen this problem?

  Help, please

  JRT

  Oudu a few hours and several breakpoints, I found the problem. Apparently, update a GaugeField using .setValue (int) can throw an Exception of the illegal Argument? But only once a year. I don't know why it was a problem now, the code has been stagnant...?

  SOLUTION:

  try {}

  Update GaugeField

  }

  catch (IllegalArgumentException foo)

  {

  }

  BOOYA! FTW

• JVM 104 only on Simulator 81xx

  I am writing an application using the eclipse (3.4.1), the Blackberry JDE component 4.5.0.16 and the JDE 1.0.0.67 plugin. I ran my app on simulators and 83xx, 87xx and 88xx successfully (more on a 8310 Physics), but I get a JVM 104 Eception: IllegalArgumentException when you try to run my application on 81xx simulators.

  I've traced through my code with the debugger, and all goes well until running theApp.enterEventDispatcher ();

  At BorderBitmap.paint (Graphics, XYRext) line: 143 tab appears in eclipse with a message "Source not found."

  I don't have even a BorderBitmap.paint call in my code, so I guess that the problem is somewhere in the code RIM itself.

  Are there restrictions specific 81xx I need to know to avoid this problem?

  Thank you

  
  

  I've isolated the problem in commenting on several lines until the app ran itself.   I was creating a HorizontalManager and add several buttons:

  HorizontalFieldManager buttonManager = new HorizontalFieldManager (Field.FIELD_HCENTER);
                  
  buttonManager.add (previousMonth);
  buttonManager.add (previousDay);
  buttonManager.add (previousHour);
  buttonManager.add (today);
  buttonManager.add (nextHour);
  buttonManager.add (nextDay);
  /*
  buttonManager.add (nextMonth);
  */

  If I try and add a bit more to the manager, I get the unhandled exception.  I guess it makes sense since the BlackBerry 81xx have narrower than most displays.   But such situations should not be treated more strictly than to throw an exception?

• Exception in the progression of AppMerge flow

  Hi gentlemen

  
  

  During the deployment of ear on Weblogic 10.3.5.0 file. Following error is reported on this first page

  Cannot access the selected application.

  Exception in the progression of AppMerge flow

  Exception in the progression of AppMerge flow

  Problem of VALIDATION PROBLEMS FOUND: cvc-complex - type. 2.4: expected elements ' class servlet @ http://Java.Sun.com/XML/NS/JavaEE file jsp @http://java.sun.com/xml/ns/javaee'instead of' display-name @http://java.sun.com/xml/ns/javaee' here in the element servlet @http://java.sun.com/xml/ns/javaee: null> problem: cvc-complex - type. 2.4: expected elements ' servlet class @http://java.sun.com/xml/ns/javaee @http://java.sun.com/xml/ns/javaee jsp file'instead of' name display @http://java.sun.com/xml/ns/javaee' here in the element servlet @http://java.sun.com/xml/ns/javaee : null>

  
  

  No idea how to solve this error? It seems a problem in the Web.XML (I checked it twice there is no tag duplication as a filter mapping etc.)
  

  
  

  Regards

  Park

  In fact, these two tags are creating problem. When I delete it works. While with the display name they does not work

  AdminServlet

  Axis Admin Servlet

  org.apache.axis.transport.http.AdminServlet

  AxisServlet

  Apache-Axis servlet

  org.apache.axis.transport.http.AxisServlet

  Concerning

  Ali

• Error JVM 104, size of the cod file...

  
  

  problem solved,

  I change the code with netbeans and prverify and compile it with JDE.

• Runtime Exception while simulating sms send device/network CDMA

  I'm trying to simulate the sending of a sms of my application. Since the device during the simulation simulates CDMA network, I use DatagramConnectionBase to send sms.

  Whenever my application tries to send a text message it throws JVM 104 error: Runtime Exception.

  I use Eclipse to develop the application and we tried to simulate this on different Blackberry JDE pluggins, including v5.0, v4.7.0, v4.6.0 and the result is always the same. Just this part crashes me to begin to test my application.

  Thank you.

  The section of the code of the application that sends sms is:

  DatagramConnectionBase _connection = null;
  DatagramBase _sms = null;
  Try
  {
  _Connection = (DatagramConnectionBase) Connector.open ("sms: / /: 0");
  _sms = (DatagramBase) _connection.newDatagram (_connection.getMaximumLength ());
  _sms.setAddress ("sms: / /" + _mobileNumber);
  _sms. Write (_smsContent.GetBytes (), 0, _smsContent.getBytes () .length);
  _Connection.send (_sms);
  _Connection.close ();
  }
  catch (IOException e)
  {
  System.out.println ("' sending Txt Message on CDMA network Exception:" ")
  + e.getMessage ());
  }

  OK... I found the way to make it work.

  Thank you all.

• Persistent object Null pointer exception

  Hi all! This is my first time that you try to use persisted data and, as a result of the Bberry tutorial, I'm a JVM 104 "NullPointer Exception" when you try to synchronize and "setContents' in a new Bank persistence (so basically my"PersistentObject"is Null (as confirmed by the debug), which I suppose that logic since I have not stored all the data it again.) I guess I'm just curious as to why I get this error (and cannot just write something on the value "null"). Here is a code...

  public static PersistentObject levels = PersistentStore.getPersistentObject (0x3e1f605d47578703L);

  ...

  String [] level_info = {'0', '1'}; just to test

  Synchronized (levels) {//this is where I get the error of debugging of "NullPoint Exception", where levels = "null"

  levels.setContents (level_info);
  Levels.Commit ();

  }

  Thank you in advance for your help!

  I solved the problem by displaying the 4.6 JDE 'samples' tutorial persistentstoredemo...

  You can find it here on your PC:

  C:\Program search in Motion\BlackBerry JDE 4.6.0\samples\com\rim\samples\device\persistentstoredemo

  Thank you

  -Jordan

• ChangeListener to a new screen

  Hello

  I'm trying to get a button when you press to move to another screen.

  I have a button with a ChangeListner attached to it.

  Listener button1Listener = new Listener();
          button1.setChangeListener(button1Listener);
  

  The listener class is as follows:

  public class Listener implements FieldChangeListener{
      public void fieldChanged(Field field, int context){
          ButtonField button = (ButtonField)field;
          final String label = button.getLabel();
          UiApplication.getUiApplication().invokeLater(new Runnable(){
              public void run(){
                  Status.show(label + " was pressed");
                  page1 page1 = new page1();
                  page1.pushScreen(page1.screen);
                  page1.enterEventDispatcher();
                  }
              });
      }
      }
  

  Page 1 is the next page, I want to go, but when I press the button1 on the other screen I get a "error JVM 104 Eception: RuntimeException.

  All solutions? N ' not hesitate to change what I did!

  Thank you!

  With out being rude here, if you learn Java on BlackBerry, I suggest you use some other resources that are around, especially the sticky thread on this forum:

  Useful links for beginners and experienced programmers
  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=13264

  My personal favorites of this are:

  Getting started
  http://NA.BlackBerry.com/eng/developers/started/

  Labs
  http://NA.BlackBerry.com/eng/developers/resources/developer_labs.jsp#tab_tab_jde

  And I would say especially since see you the development Guide and the examples provided with the JDE - there is lots of really useful stuff you use no wait on someone to fix your code so that maybe you do not understand and therefore cannot maintain.

  In this case, you must understand that, to move from one screen to the next you push and pop screens - examine the samples to see this in practice.

• Steps to locate BlackBerry Apps

  Hi all

  I went through the developer for the localization of applications guide. But its quite confusing. I followed following steps

  In BlackBerry JDE

  1. I tried to create the files .rrc and .rrh by right-clicking on the project-> create a new file. But when I try to open that. I get the error "expected; or. ». I guess we cannot create like this.

  2. as the option above did not. I tried to create the new project-> Selected Language Resource type-> name of the input file. We get the files .rrc and .rrh (I can add value key here) with Resources.java file (in which they explain how to use the beam). But an interface in which the BUNDLE_ID and BUNDLE_NAME etc. are defined is not visible not sure why? (As mentioned by Johnathan Fisher in location Article) . I tried to create a screen in this project and use resources. I am able to compile that. But it is not visible in the downloads. Not sure if it's because of the Type of project - language resource.

  3. then, I tried to decompile the generated Interface class above and use in a HelloWorld project. Where I manually added the interface code to the file HelloWorld. And then it worked. But if we have to manually add the code for the interface, then it is not a good practice and automatically its does not work in step 2.

  In Eclipse with the JDE Plugin.

  1. I create New-> other-> resource-> .rrc and .rrh file file is created. I manually add the interface file. It compiles successfully. But gives error 104 JVM (resource Exception) when running in the emulator. Don't know what the problem is.

  If the steps are not clear.

  Can someone give me please clearly the steps how this should work.

  Thanks in advance,

  Sandeep

  You must create a file CRR and HR that matches your application name. If your application is MyApp names, your files must be MyApp.rrh and MyApp.rrc. If you add languages that they must be added with "_countrycode", for example MyApp_de.rrc

  This is enough to work in the JDE. If you want to use variables within eclipse (without the plugin) or another IDE, you must create a dummy interface called MyAppResource.java that contains a long BUNDLE_ID and a string BUNDLE_NAME. do NOT add this interface in your jde project, it is used only to post the resources within the IDE.

• CheckboxField [] and fieldChangeListener.

  Hello

  I need a dynamic number of checkboxes for a project I'm working on. My code example is as follows. Somehow, I get an jvm stackoverflow exception.

  public class abc() extends screen implements {FieldChangeListener}

  CheckboxField [] boxField;

  public abc() {}

  .

  .

  .

  the length is variable.

  boxField = new CheckboxField [length];

  VFM VerticalFieldManager = new VerticalFieldManager();

  for (int i = 0; i)

  boxField [i] = new CheckboxField();

  boxField [i] .setChangeListener (this);

  VFM. Add (boxField [i]);

  }

  Add (VFM);

  }

  Sub fieldChanged (field field, int context) {}

  Hardcode for now. The intention is to loop through and uncheck all

  except one who was just ticked.

  chkBoxField [0] .setChecked (false); StackOverflow exception

  }

  }

  Help?

  In this way:

  chkBoxField [0] .setChecked (false);

  You set the value of the checkbox, prompting to advise its FieldChangeListener, which is to set the value of the box, which advises the FieldChangeListener... I could go on.   Until what I stack overflowed of course.

  Although there are many ways to stop this, I think that you should be aware of using the context provided to the fieldChanged method.  To check

  FieldChangeListener.PROGRAMMATIC

  If it matches, then the change was made by a program and not by the user, in which case you should ignore the change.

  For example:

  Sub fieldChanged (field field, int context) {}

  If (context == FieldChangeListener.PROGRAMMATIC) {}

  Only to process user changes to checkboxes

  return;

  }

  .....

  Hope it makes sense.

  Edit: this has been creating during the validation of RexDoug, my apologies for the repetition.

• Poblem to persistence storage

  Hi all

  In my application, I use the persistence store object to store the array of objects of the class defined by the user. But whenever I run my application it showed me the error 'Error JVM 104 NonPersistableObjectException' 7 stucks execution.

  In the integer part of the persistence object & all what I have try-catch instructions & I also tried with execution clean.bat hundreds of times. But I didn't come to any solution.

  Is there be no problem by storing the array of objects of class user-defined?... Please help me...

  Any help would be appreciated...

  Concerning

  Please note that all the objects that you want to store in the persistent store must be an instance of the class that implements the Persistable.

  In addition, all areas inside these objects must be an instance of the class that implements the Persistable.

  If the container object implements the Peristable interface, but there is a field that is not persistent, you get problems.

  Another point is that if you have an instance of Vector field, check this vector elements.

  All objects in this vector (or another container as an instance of the Hashtable object) must be an instance of the class that implements the Persistable.

• IllegalArgumentException uncaught in BB 8300

  Hello

  I eception java.lang.IllegalArgumentException When you run a Midlet application in the Simulator.

  I use

  plugin Eclipse 1.0.0.67

  JDE 4.5.0.16

  8300 Simulator

  The application is a midlet this was successfully performed in another phone (Sumsung).

  In the BB Simulator it gives me an error as soon as I run it.

  Error JVM 104

  I added some try/catch anywhere in the program and I still have the exception.

  I have also a System.out.printout in the constructor of first class and he never reached this point, it seems.

  I don't know what to do to find the problem. The debugger does not work in eclipse (at least mine does not).

  I thought to look at the files .dmp or .bug. There are tools to read?

  What other files should I look?

  I wonder if the fact that the javaME application uses all the interface user of BB and it is compiled into a Midlet creates problems.

  MIDlets using standard JavaME must run in BB, right?

  How will I know if the error is in my code or my loading code?

  Thank you

  Anna

  Hello

  I found the answer here:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=4945

  In the project properties for the eclipse pluging, I changed the name of the midlet to

  'package.classname '.

  and finally, it worked!

  Thanks for all suggestions.

  Anna

• Packege optionally update problem

  Hello
  
  My environment is WebLogic 10.3.5.
  Anyone who has never managed to update an optional package that is covered by other applications or libraries?
  When I try to do in the administration of WLS console by pressing the button "Refresh" on the deployment page, a product error that says:
  
  Cannot access the selected application.
  Exception in the progression of AppMerge flow
  Exception in the progression of AppMerge flow
  [J2EE:160112] Error: The directory, + "directoryname" + does not contain a valid module. If the directory represents an ear file, it must contain a META-INF/application.xml file. If the directory represents an ejb - jar file, it must contain a file META-INF/ejb - jar.Xml. If the directory represents a war file, it must contain a WEB-INF/web.xml file. Make sure that the source directory is a valid module and try again.
  
  The last message is totally useless as my optional package is a simple jar file.
  Maybe this can be done by wlst command or wldeploy ant task, which I do not know.
  
  Help, please!
  
  Kind regards
  Kenji
  
  Published by: Kenji Imamura on 16/06/2011 07:15

  When you update an optional package you will need to provide different specifications and versions of implementation
  in the file 'manifest. MF' in the META-INF directory. Then, you deploy the version next to the former and
  Change the reference in the application to use the new version of the library.

  Some notes on the use of the optional package can be found here: http://m-button.blogspot.com/2010/05/shared-libraries-versus-optional.html

• When I send an email-error message says cannot save in the folder

  do not save my emails sent in the sent folder. When I click on send a new email... I get an error message that says: it can not save to the sent folder. Just started using TB yesterday.

  I have a similar problem, except that my progress bar never stops. The last thing I should read is message saved in the sent folder. If I close the window, the message does not appear in the sent folder. I must tell you that I've been using Thunderbird for several years now. Since yesterday, it was working fine. Now it isn't and that left me scratching my head.

  stevecc

• X 3 elite: display tools while it is plugged?

  Love the device X 3 elite. With the exception of the bad implementation of Double-tab-to-Wake and the second apparently defective SIM tray, the device is great. Good size (not too small), fantastic and audio screen.

  One thing that I miss my Lumia devices and also seen on my Note 7 son's screen look.  While the viewing tools works very well when it is connected to the counter of dock and running a monitor, I love it when it is just plugged.

  Is there a way to do this?

  This is my 950xl and Note 7 sons.

  

  Hello

  You can always manually run tools display when you have your connected device.  I pinned it to my homepage so I can launch quickly.