K64F JavaME 8.1 - BindException when running proxy.jar

Similar Questions

• K64F JavaME 8.1: Connectivity issues

  Hello

  I tried to implement the K64F according to the quick Start guide (Windows 7). During the configuration of the USB-serial interface (see also https://mbed.org/handbook/USBSerial) without peripheral supplement has been detected by windows after you connect the second USB (K64F Mirco USB) cable.

  Even on Ubuntu USB that a device is listed when you connect the two cables. I missed something in the installation procedure?

  What COM Port must be selected in the device connection manager?

  At the moment to connect to OpenSDA Micro USB causes a permanent "State of connection '. Opens a connection via putty series fails.

  I also tested the ethernet connection, where the Commission obtains an IP address from the DHCP server. But establishing a connection by using the connection manager providing the IP also does not work.

  CLI tools saves the following statements.

  java-jar proxy.jar - socket 192.168.1.118

  Trying to open the socket with device connection: 192.168.1.118:2201

  [Connected to the Jack: Socket[addr=/192.168.1.118,port=2201,localport=41050]

  Open channel 8 with hash 0x7d87edff

  Channel 8 CLOSED-> OPEN

  notifyResponse AVAILABLE_RESPONSE on channel 8

  AVAILABLE OPEN-> 8 channel

  Open channel 9 with hash 0 x 0

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  I read in this forum that there are some problems with the static IPS (see definition IP static in Java ME 8.1 for Freescale MBED K64F). But in my case, I do not change the default setting (== > DHCP)

  Any help is appreciated.

  Thank you

  Thomas - a Java ME recruit on the bleeding edge.

  BTW - well documented Getting Started guide

  Hello

  You should be able to access the K64 console via USB. You only need the connector microUSB OpenSDA for this, and you must install the driver of series mbed USB under Windows. In my case, K64F console is so accessible that COM3 and the K64 displays network (DHCP address) on the market settings.

  For the connection via the channel of IP tools, please try the Device Manager SDK ME first (not the command line proxy) using the DHCP from the K64F address. This generally works reliably, but to eliminate possible problems with the Windows Firewall, don't forget to disable your Windows Firewall for testing purposes.

  Best,

  -Terrence

• Activity monitor close unexpectedly when running in the background on the left

  Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

  Activity monitor also using a lot of energy since the upgrade?

  Any help would be appreciated. Thank you.

  Model: MacBook Pro (retina, 13 inches, early 2015)

  OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

  Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

  If you have moved a previous version to a different location, it will not work.

  If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

• Unable to access Mac files when running in Windows.

  Applied Bootcamp, running El Capitan and Windows on MacBook Pro 9.2 10.  Fine.  This is all OK.   But...

  I want to access my files of Notes from the Mac side.   I can get to the Notes.app in the Applications folder when running in Windows.  I understand that I can read Mac files in Windows.

  I can't get to the actual Notes files indicated in the content of the Note.app folder in the Mac partition.  (Running in Windows 10.)

  Can someone help me with this please?

  Missing Manual instructions ok, so far, but are not real files to open.  ???

  Thank you, Mark

  Windows cannot write to the readers of Mac format.

• Satellite A60 freezes when running on batteries

  Hello
  I have a problem with my Satellite a60. I bought it a few months ago and he starts it freezes when running on batteries. I don't think it's a problem of software or memory. I did a few tests of memory...

  It usually occurs only minutes after startup, the keyboard is not working, the screen freezes (but you can still see the immagine!) and only the exit ramp button works... but it happens sometimes... like once a week maybe... anyone else had similar problems?
  Thank you for any response,
  Radek

  Hi guys

  It is very difficult to say what may be the problem. In my opinion, there are several reasons for this. In the boot process, there may be some conflicts with background programs and services or certain hardware components. May be overwhelmed with all this processor and simply give up.

  If you wish, you can try to disable some startup items in the system configuration utility or disable certain hardware components not used in Device Manager. I don't know if this can solve your problem, but it will be interesting to know is there some success.

  Radek did you have this problem if the laptop is connected to the power supply?

• Satellite A100: sharp wail high when running on battery

  Hello world

  my laptop is 24 hours old and yet I get this sharp wail from left hand side near the exit of the fan. I don't hear it at all when running on the main, only on battery power. No idea what it is and why this happens?
  Also, is it "normal"? I would not have thought so!

  Thanks in advance.

  Hello Adam

  I think there is no reason to panic. I think I know what mean you, but if I'm wrong please let me know.

  This noise is probably due to FL inverter. If the laptop is connected to the AC adapter, try to change the brightness level by using the FN + F6 key combination and tell me if this noise occurs after doing this. Change the brightness level, the voltage will be reduced at low level and the result is this noise.

  When you use laptops with laptop battery power will run automatically on the other profile saver (NORMAL) power and this power profile monitor, brightness is set at the lower level. When the laptop is running on battery use FN + F7 and upgrade the most high and this noise will disappear. Am I wrong?

  This is visible on each laptop model, and it is normal.

• Screws disappear from the windows taskbar when running

  Hello!

  It is a strange happening in the world when running LabVIEW 2014 or 2015 on Windows 7.  When the VI property-> the appearance of the window-> Custom-> customize-> box 'allow to minimize the user window"is unchecked the VI disappears from the taskbar when running.  It is moderately annoying, anyone know if there is a good reason for this behavior without papers?  Other than to keep the box checked, is there another way to prevent that from happening? I don't really feel like swapping through all possible combinations. :-)

  Thank you!

  C

  In fact, it's documented behavior.  Access the help file for this dialog box properties.

  There is a note that says:

  

• Add items to the combo box when running

  In my program, I want to add int '34' "43", "17"... and let the user choose one of them to the drop-down list box. How can I add items to the combo box when running. Create a property node 'String [] '? I try that, but its screen is "3443". I want to display as "34".

  43

  17

  See attached extract

  

• error 7: when running EXE

  Hello

  I am getting below error when running exe. But when running in the development environment, it works fine. Help, please

  Reference VI opened in PRJA2871_Firmware_LoadVI.vi:70002-> PRJA2871_Firmware_Parameter Download.vi-> PRJA2871_MCRL main Screen.vi
  Path of the VI: test\EXE\MCRL_VCR\MCRL C:\LabVIEW new Code\Code VCR.exe\Ethernet\PRJA2871_Download_Ethernet.vi V2.1

  Built Application or shared library (DLL): ensure that all loaded screws dynamically were correctly included in the specification for the application or a shared library build.

  LabVIEW Real-time: screw built into executables are not accessible via VI Server calls. Use the Source Distributions dynamically call screws on real-time targets.

  Hi James,

  In fact, it was my mistake. I used a VI for the purpose of debugging. But that VI was not within the project. That's why he was throwing the error

• How to create a reference in the schema when running?

  Hello

  I make a program and I would like to create references to objects at run time, y at - it a function in labview that lets do?

  Thanks in advance!

  It of maybe just me, but what do you mean by "cluster objects"?

  What is a cluster as terminal? If this is the case, then just to let you know, that a cluster cannot change the size/number when running, you need a table for this.

  Where are you what to change the visibility for?

  If it's a 'high-level' orders/lights vi you what to change the visibility on a Subvi, then you must provide the sub - vi with an array of references to the controls/indicators.

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• I have a 512-ES1-P84G with a handle leak when running Firefox

  I have Windows 10

  When you use Forefox version 45, 46 47 4th, even in safe mode, the number of handles for Firefox coults upwards forever.

  I have the factory Intel HD Graphics driver 10.18.10.4276 version

  There is a much more recent graphics driver available.

  1. someone else with Widnows 10 has a handle leak when running Firefox?

  2A enyone has resolved and how?

  3. has anyone upgraded to the last jerking of Intel's Intel HD graphics and there it works well?

  Thank you

  I stopped the handle leak.

  It was actually caused by BitDefender, my AV software and not Firefox.

  I stopped it by disabling "Active control of threat" in BitDefender.

  Thank you

• When running sfc/scannow, it says: error system3_.exe

  Original title: error system3_.exe

  When running sfc/scannow, it is said

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Administrateur > cd\

  C:\>sfc/scannow
  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.
  ].

  any suggestion?

  Thank you

  We need to back up a bit and get more information...

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  What is the problem you are experiencing that you think that sfc/scannow will correct?

  See if the remote procedure call (RPC) Service is running.   If it is not executed, it should run and many other things will not work if the RPC Service is not running.

  To do this, click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services applet.

  Locate the remote procedure call (RPC) Service and see what he says in the status and Startup Type columns.

  If the RPC Service is not running (it must be), right click, choose Properties and see if you can start and change the type of start to 'automatic '.  If you make adjustments, click the OK button to save your changes, restart and make sure the settings "stick."

• What happens to your computer when you compress your old files when running disk clean

  What happens to clean your computer when you compress your old files when running disk?

  Why is it you would compress the files while running a cleaning disc?  http://www.help2go.com/Forum/computer-help/105414-compressing-old-files-disk-cleanup.html

• Java will not add/remove programs uninstall. When running java get error (java script false) when trying to uninstall get error message (error application of transformations

  When running java get error (java script false) when trying to uninstall get error message (error application of transformations. Went to sunmicro systems, but can not find help. Also having problems with script errors. I'm debugging the scripts not controlled. Using windows xp IE8.

  I think I need some type of uninstaller or need assistance.

  TYVM

  Connie Pitre

  E-mail address is removed from the privacy *.

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the steps in the link below of the Java Support to solve the problem with the error application transforms during the uninstalling of Java.

  Error application of transformations

  http://Java.com/en/download/help/error_applying_transforms.XML

  Method 2:

  To fix problems with the Script in Internet Explorer error click the link below.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260