KB2286198 arouses computers to run slowly. Windows XP SP3 and Windows 7 64-bit.

Similar Questions

• is it possible to establish a direct connection between two computers, one running on windows xp sp2 and other running on windows xp sp3?

  Hello
  I connected two computers, one running on windows xp sp2 and others running on windows xp sp3 via com using RS232 port via link Modem DFM-562E ++.
  I am able to dial numbers from a PC successfully.
  But when I do a direct link between them (one as a host, the other guest) through the com port, I get error 777.
  Is this because the two PC's using different service packs?
  Help, please.
  Thank you & best regards
  Ravi

  It is not the service pack - although you should have installed sp3 now.

  Your message is not clear: have you been able to connect successfully computers using your modem D-Link?  How did you do that?  Will there be a modem in the second computer?

  What cable are you using to establish a direct connection between the com ports on both computers?  If you have purchased this cable online, please provide a link to the site where you bought it.

  Please describe the physical connection between the two computers.  For example, this is how you connect to the Internet by dial-up services:

  computer 1-{(9 broches) RS-232 serial port}-{RS-232 cable supplied with the modem}-{modem}-{phone cord (RJ-11 modular plugs at each end)}-{telephone wall jack}

• I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit.

  I'm having a problem with lightroom 5.7.1 running on windows 8 64-bit. Whenever we try to open the computer software crashes, we deleted the lock file and reset suggestions as suggested, without success. We have uninstalled and reinstalled the software without success, still the same problem of crash

  If all of the computer crashes, it's a hardware malfunction or a bad/corrupt/old video driver.

  First install/reinstall the latest driver for your graphics card. If this does not help, then you need run diagnostics on your hard drive, memory and also make sure that the fans are cooling the CPU correctly.

• Abobe Acrobat Pro XI (11.0.12) runs on Windows 10-64 Bit OS?

  Abobe Acrobat Pro XI (11.0.12) runs on Windows 10-64 Bit OS?

  Hi marcelm48082140,

  Yes, Acrobat XI has been tested by our team on Windows 10.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• HP LaserJet P1606dn Professional - do not Duplex correctly when running on Windows Vista 64 - bit OS

  I have connected this printer (via USB) to the PC running Vista 32-bit, Windows 7 32-bit and Windows 7 64 - bit, and the printer works fine double-sided printing. He behaves badly only when running under Vista Ultmate 64 bit (SP 2). "Misconduct", it's that it is not duplex correctly when you return to the long side of the book (the normal way you duplex)-it always falls on the short side of the book in any application I try on any type of duplex setting. I installed the latest drivers. I suspect that we have a problem of driver here.

  In one of the other HP forums, I noticed that this same issue existed on jet printers to all-in-one HP ink several years (and HP has released patches for those), but I couldn't find any announcement for my laserjet model. Can someone tell me a patch for my model on this issue?

  Hi SteveCT99,

  Since then, you indicate that the duplex works fine on all other computers except the computer Vista. Follow the steps below to uninstall and reinstall the printer.

  1. open Control Panel

  2. click on uninstall a program

  3 uninstall the 1606dn Laserjet list

  4 restart your computer

  5. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  6 download the drivers and full software functionality, and then reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-80329-8&cc=us&DLC=en&LC=en&OS=2100&product=4110410&sw_lang=

• Does anyone have SOF2 still run on windows 7 64 bit? __

  Here are the steps I've taken so far.

  Updated all the Nvidia drivers for my 9800 GTX +.
  Install Direct X 9 c - hoped this would help with OpenGl
  Configure the program to run as admin.
  Set the program to run in Windows XP SP2
  Set the program to run in Windows XP SP3

  When I start the program it's what I get Windows 7 64 bit
  Deal with the accident of application SOF2MP.exe
  Could not load SOF2MP.exe

  Sof2 ran when I had Vista Ultimate 64-bit.

  The game I was talking about is Soldier of Fortune 2 Double Helix soldier of fortune recovery not.

  I did the recommended settings and it help out but I can not load the game.

  I tried to install Direct x 9 c but I don.t think it worked. That's what the game initially provided with.

• Can I get my old Intellipro MS to run on Windows 7 64 bit?

  I have an older Microsoft keyboard and Intellitype software, which was fine on my older PC. I have now run Windows 7 64 bit and I would like to resurrect this keyboard very uncomfortable for all the useful functions that comes with it. When I connected the keyboard it automatically updated the driver, but I need to install the software to get the full functions. I'm an "old chook" not terribly savy with technology. Help!

  Hello

  What is the model number of the Microsoft Keyboard?
  I suggest you try to install software keyboard for the link and using control of it.
  http://www.Microsoft.com/UK/hardware/download/download.aspx?category=MK
  Hope this information helps

• Cannot get the Adobe PDf printer to run on windows 7-64 bit

  Has anyone solved how do the Adobe PDf printer in windows 7-64 bit. During the installation it aligns it with LPT1 printer port. other discussions/solutions, it was suggested to add new printer with port existing use: Documents\ * .pdf (Adobe PDF) selected.

  This port option does not appear in the list of existing ports well. can someone help with this problem? Thanks to a witness of anomaly. Mike was soon

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• LDS library 2009 run on Windows 7 64 bit?

  LDS library 2009 installs but does not not on Windows 7 64 bit. Troublshooter does not resolve the problem. Progams works well on Windows 7 32 bit.

  There are instructions on their website for win7 64 bit users (although the download failed on my pc)

  http://www.ldspocket.com/lds2005.html

• Windows runs slowly immediately during Installation and quickly deteriorates

  Windows 7 (Home Premium 64-bit) was running slower and slower, until I noticed that I barely used it.

  Microsoft helped me to do a clean install, which went well.  However, I noticed in the next few days, he slowed down once again, to the point where he could not load pages after that one or two sites were consulted.  He started producing pop up messages that it couldn't detect an Internet connection.  I'm supposed to get 105 Mbps, but speedtests always varies considerably, from 10 Mbit/s to 80 MB/s.  I had my ISP check it out.  They reported a weak signal.  Redone, they were unable to get above 30 Mbps speeds.  They checked with other laptops, which has always produced 80 MB/s.  They conduct research on why they do not have 105 Mbit/s, but I still believe that my PC should work without problems with 30 Mbit/s.

  It's not something obvious like defrag or chkdisk.  I have Norton Internet Security 2012 with updates that are still very current.  It is set to auto-protect, including regular malware checks and defrags.  I did some defragments, who report the system is usually 1% fragmented.  I came across an article from Microsoft on unnecessary software on startup.  Unfortunately, it did not provide any indication as to which programs to remove the starter, so I removed what I considered unnecessary at startup.  Files such as Cyberlink and iTunes have been removed from the start-up.  The files checked for updates were moving start after a delay.  Although the boot files may have contributed to the problem, I don't think that they are the main problem because the PC increasingly slows down after it starts.

  I use three browsers: IE9; Chrome; and the opera.  The behavior is the same on all three.  I also had the same problem on the same PC.  I doubt it is cluttered with RAM because the problem starts so quickly and I have four GBS.

  HP Pavilion Slimline s3750t

  • Processor Intel Core 2 Quad Q8200 [2.33 GHz];
  • Memory SDRAM 4 GB DDR2 800 MHz [2 x 2048];
  • Hard drive 640 GB 7200 RPM SATA 3 Gb/s;
  • 512 MB NVIDIA GeForce 9500GS & tuner TV [DVI, HDMI, VGA adapter];
  • LAN port on motherboard (10/100Base-T), no wireles LAN.

  I'm about to backup and do a clean install, even if I did a month ago.  If anyone has any suggestions, or it may suggest a diagnosis of program that already has and specifically addresses this problem of Windows 7, I certainly appreciate it.

  Thank you
  Lou Messina
  Bel Air, MD

  Hello

  Follow these methods and check if that helps:

  Method 1:

  Step 1:

  Check if you have the similar problem in safe mode, otherwise you can try to put your computer to a State of clean boot in normal mode and check if it works:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:

  Follow the article to perform the clean boot on the computer:

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

  Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

  Method 2:

  I suggest you to optimize windows 7 for better performance and check if it helps:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  CHKDSK warning:

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  Method 3:

  Follow the steps in troubleshooting from this link and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

   

  See also: http://windows.microsoft.com/en-US/windows7/Why-is-my-Internet-connection-so-slow

• is there a driver for a canon Lazer MF3240 printer out there? That wil run on windows 7 64 bit?

  Updated 7-64, SP2 from XP - 32 and the driver is not compatible. Tried to run the program compatibility XP from Windows 7, but so far no results

  In order to use Windows 10 with her because they offer me free.

  Go here:

  They seem to have the necessary drivers.

  Canon MF3240

• Older version of the windows application does not run on Windows 7 64 bit

  I replaced my PC which had Win 7 32 bit with a new one running Win 7 64 bit.   Tried to run my application on the new PC, but without success with the message box 'version of this file is not compatible with the version of Windows you are using.  It worked fine on my previous PC.  How can I overcome this.

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to run programs on the new computer.

  I will definitely help you with this.

  I suggest you go through the link below:

  Refer to the suggestion given by Marilyn O replied on September 20, 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/this-verison-of-this-file-is-not-compatible-with/0c6a4c8e-1416-47a5-b6b4-6d10a82942da

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Windows Defender expires when you try running under windows 7 64-bit

  My environment is as follows:

  • Win7 64 bit running on a generation of Corsair
  • Microsoft Security Essentials.
  • Windows Firewall is also running

  I see Windows Defender not upward, so I click on: "click here to turn on."

  • This operation returned because the time limit has expired. (Error code: 0x800705b4)

  Windows Defender is still down.

  Someone has an idea of what is happening and how to fix this?

  Thank you

  John

  MSE stop Defender in W7 if it replaces.

  More info here - http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/windows-defender-and-microsoft-security-essentials/5309cb8d-02e1-40e8-974f-0dcedb9ab9fd

• run on windows 7 64-bit vb6 applications

  Dear programmers,

  I use Windows 7 SP1 32 - Bit.
  I developed with VB6.0
  I develop a database application with my OS, it works on my OS.
  When I install on Win 7 32 Bit (no SP1), and also an OS Win 7 64 - Bit (no SP1), it won't work. Rather, it will return a runtime as error message:
  "Class does not support Automation or does not support expected interface."

  The error message is generated by the two types of BONE.
  Please what should I do to make my application running on all windows regardless of their version? And what should I do to fix this?

  Thank you.

  Hello

  The question you have posted will be well suited in the MSDN Forums.

  Microsoft forums are supported on the current releases of Visual Basic as well as assistance on migration to the .NET platform through the following forums:

  · Visual Basic Interop and upgrade (Update the VB6 code to .NET)

  · Général Visual Basic (General questions VB.NET)

  · Visual Basic Power Packs (controls, components, samples and tools that are part of the battery of VB)

  · Visual Basic language (Language VB .NET - compiler, DURATION, the language keywords)

  · Visual Basic IDE (IntelliSense, debugging, ErrorCorrect, code snippets, colorization, smart tags, etc.).

  These forums don't support Visual Basic 6, however, there are many third-party support sites that do. If you have a VB6 question please visit these popular forums:

  · VB Forums

  · VB city

  There are also many other technical resources and sites for Visual Basic 6 developers such as:

  · Required for VB 6 developers training videos

  · Visual Basic 6.0 on MSDN Library

  · MSDN Visual Basic 6.0 Resource Center

  · VB Helper

  · CodeGuru

  · Draft code

  · Planet Source Code

  Reference link: where to post your VB 6 questions

• Photoshop 5 (32-bit) runs on Windows Vista 64-bit?

  Original title: operating system 64-bit and 32-bit programs

  My machine is running Vista 64-bit. Photoshop 5 will work HIM on this version that PSLE is a 32-bit application?

  they run 32-bit applications on 64-bit in 32-bit mode.  You should check with Adobe to find out if PS5 don't.