Installation of WIN 10 stuck at 99% of all night

How to solve this?  It's the 5th attempt.  I'm afraid to stop because this could result from downloading and installing again.  Installation failure last time I checked install chose updates in WINDOWS 7, which did not.  When to stop I got the message do not feed delivery - installation of updates.  I finally had to force quit as updates are not installed.   I can not even find the list now to ensure that these are checked is no longer

Always problems I had 85% today but I was working also I minimized inadvertently the page again and then download disappears and does not get completed.   Moderator Gerry C J Cornell suggested I download Windows Media 10 ISO creation tool and make a place in upgrading but don't know how to proceed.  Requires that I use a DVD (and what type?) I find this to be too much for me because I am not computer savvy

Before I try and move forward with this ISO do I need to complete all updates failed in WINDOWS 7 that has failed?   I did a Windows Update hotfix and found and listed errors corrected registration for the Service is missing or corrupt RESOLVED installation issues recent updates FIXED

NO CORRECTION error 0x0800F081F I googled this error and the site found at day-error-0x800f081f https://windowsinstructed.com/fix-windows-mise / in Win 7 where was supposed to solve this Said, it was fixed, but when you click on additional information it shows is not fixed.  What is the origin of the problem? Also what I need to go back and try and do all updates of WIN 7, which dates back to April which failed to install.  This issue of update seems to have been common

If I don't need to do updates so I want to try to use the WIN 10 Upgrade Wizard again - as all these other means seem too difficult for me

MS should try to get this working properly.  Windows needs to extend the deadline for the free upgrade if they cannot even solve all these problems installation.

If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

Disable your anti-virus software so that the upgrade.

I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

Download the update of Windows Media Player 10 tool creation build 10586:
http://www.Microsoft.com/en-us/software-download/Windows10

How to download an ISO using media tool:
http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

How to make a upgrade in Place using method 1:
http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

If this does not work please provide more information for your issue to be diagnosed.

Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

For assistance OneDrive see paragraph 9.3:

http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

Tags: Windows

Similar Questions

  • BSOD after fresh installation of Win 7, failure of page in the nonpaged area. Win 7 will not install

    A day at the start of a program on my computer that I used for years without incident, the computer suddenly fell down, restarted, and I got the infinite loop of system repair. No change in hardware/software, don't know if a recent Windows Update has been installed. Once again, CPU, mobo, Vid, RAM are the same for the past 4 years.

    After much frustration, I decided to just reinstall Win 7. So I deleted my partition, re-created a new partition and installed Win 7

    In the last step of the process of installing Win 7, it says Setup cannot complete. It is then stuck in a loop of reboot with a BSOD page fault in non paged area.

    I tried F8 on startup and choose Safe mode, but then he says that the installer cannot boot mode safe because the installation of Win 7 did not finish.

    I tried to reinstall Win7 by removing the disc again, but I get the same results.

    What can I do?

    HI - finally got the job. I had the computer to use only the GPU on board BIOS and was able to install. Somehow the graphics driver conflict when Windows is first installed and it kept crashing.

    Thanks for your help.

  • How long does take to install Adobe Standard?  My installation appears to be stuck at 2%

    My installation appears to be stuck at 2%

    complete the installation (using the mac activity monitor or task manager to win), restart your computer and run the Setup again.

  • Question about the installation of Win XP on Satellite Pro P200

    Hello

    I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
    Last problem: vista give no right to copy my USB hd protable with xp files.

    Finally, I lost all hope and want to go back to xp.

    Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
    Are there concerns as none have some drivers, things that do not work or problems with sata hd.

    Thank you

    Luke

    Hello

    It's a difficult topic-> XP on Vista machines.

    First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

    Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

    If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

    Welcome them

  • Installation of Win 7 RC on HP Pavilion DV6-1130sa

    I have the following questions regarding the installation of Win 7. The disc is currently containing the Vista partition and the recovery partition. I want to install then I 7 RC as a new installation on drive C with the possibility to go back to Vista if you need and have the laptop works on the original factory configuration.

    (1) if I do a fresh install of Windows 7 on the hard drive with Vista Home pre. 32 bits (including the recovery partition), the recovery partition will stop working (IE from the trunk F11 option included)?

    (2) if the recovery partition does not work afterwards, if I use my restore dvd copy I ve created, it will create the restore disk partition hard like it was form the factory? and let me go back to vista home Prem

    Please let me know if there is anyone out there who have tried the above with their HP laptops.

    Thank you for your time to help me.

    Ruwsoft

    Hello

    First make the Vista backup. How all the information here.

    (1) If you leave parition your recovery there is work.

    (2) so it does not restore partition, it will automatically recover your system.

    You might also be interested in dual boot.

    This way you will have the possibility to use the two system on a laptop computer.

    How dual boot Windows Vista and Windows 7 (Vista installed first) information here

  • Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

    Hello!
    I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
    I do the following:

    1. install Windows 7 x 64 SP1.
    2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
    3. install all updates of Microsoft Windows
    4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

    Here is the log for the first test (win7update.log) file:

    12\28\2011 update started at 21:11
    TVALZ_O.inf installed
    E/s installed & memory access driver
    driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
    util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
    Updated at 21:29

    After the restart I've run it again and the result is:

    12\28\2011 update started at 21:38
    Toshiba Bluetooth stack has already been installed.
    Toshiba value added package has already been installed.
    Updated at 21:40

    Any help is appreciated!
    Thanks in advance!

    Stand by.
    What are you doing exactly?
    You try to install own OS?

  • Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

    Failed to start installation of Win XP PRO SP2.

    After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

    After this computer hungs in black screen.

    QOSMIO F20-141 for the Federation of Russia
    M/N: PQF20E-02801YRU

    Hello

    Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
    As far as I know the recovery procedure is very easy to use and it should work without any problems.

    Good bye

  • My original OS 7 Home Basic Edition (purchased): problem of Installation of Win 10

    Windows has AUTOMATICALLY upgraded to Win Ultimate who, as the replies received from your good end, has been described as false.

    To date, I had downloaded (free) Win 10, but when installing, I received a msg stating putting touches of the original VER of Win 7 Home Basic Edition (which I bought) and then click Refresh.

    Please notify: (a) I would require to REINSTALL my house 7 the CD database (since upgraded Ultimate is false since it was produced Acer OEM - SLP Win 7 Ultimate, and mine is customer built Gigabyte motherboard) before Win 10 could be installed.

    (b) if I didn't need to REINSTALL WIN 7 Home Basic, then how and where to insert the product keys (for Win 7 home basic) to allow the installation of win 10?

    Windows 7 can not auto-level to a ultimate edition. He must intentionally upgraded or a non-genuine Windows 7 Ultimate product key has been used for the Express upgrade.

    Your best option is to reinstall Home Basic, reactivate and then upgrade.

    Or, if you have basic Windows 7 Home Edition product key, you can use it to perform a new installation:

    How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

    Resources:

    How to download official Windows 10 ISO files

    How to: perform a clean installation of Windows 10

  • During the installation of Win - xp pro vmware error 10 as mentioned below

    During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

    I think you'd have better luck if you go to the website of VMware support.

    http://www.VMware.com/support.html

  • Trying to regenerate my installation of WIN 8

    I am trying to update my installation of WIN 8. I have problems of pilot (optical drive and virtual disks) and I hope that this will help with.

    When I try to WIN 8, it says that some files are missing, and I need to insert my media. It is a download and I have no disc to be inserted.
    When I try to run the original downloaded file (Windows8 - Setup.exe), she prays for my product key. When I give him the key, it tells me that the key is an upgrade, and I can't move forward.
    What I have going on here?

    Thank you, Mary Therese K... With the help of another forum, I managed to get a new product code. With that, I used my previously downloaded file to renew my program to WIN 8. By doing this I have now all my back drivers where they belong and everything seems to be fine.

  • email nach neu installation von win 7 software download as photoshop 8

    email nach neu installation von win 7 software download as photoshop 8

    Direct download links for Adobe software

    Mylenium

  • My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

    My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

    In fact, it can be easier...

    If you have the old drive connected as, say, drive E, go to:

    E:\Users\username

    Then click in the address bar and paste it after this and press ENTER to open it:

    \AppData\Roaming\Mozilla\Firefox\Profiles

    Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

    If you find multiple profile folders, look inside to find the most recently updated backups.

    To restore the backup files, see: restore bookmarks from a backup or move them to another computer

  • How do you change installation date file name IE 20130618_293.jpg to all IMG293.jpg

    How do you change installation date file name IE 20130618_293.jpg to all IMG293.jpg

    If it's just a personal folder, and then right-click on the file, select Rename , then change the name to what you want and press enter. Avoid changing the file extension (.jpg in this case) as it may cause problems with it being recognized as the wrong file type.

  • I don't have a default on installation of creative cloud, but it appears not all options / navigation

    I don't have a default on installation of creative cloud but it appears not all options, and I can't access my programs. Is this a problem of blocking information? I can send a screenshot to illustrate.Creative Cloud.JPG

    Hello

    Please refer to the threads below where this issue has been addressed:

    Creative cloud is empty window why?

    Cloud Desktop App is empty?

    New application Cloud Creative unusable: it is empty!

    Re: Empty opening creative cloud app

    Kind regards

    Sheena

  • Stuck on 'Building in waiting' all night :(

    I am trying to use the phonegap for the first time build service. I have not built a fancy app again, I just wanted to test so I just got something really simple for now. However, I went through all the steps and I was stuck on 'Building in waiting' all night.

    I'm running out of ideas on what I am doing wrong - grateful for any help!

    Thank you

    Hi Yue_Hong,

    If you use Dreamweaver CC 2014, then you should not see this question.

    If you are using older versions, then follow the below mentioned steps

    There are two ways to solve this problem.

    1. by default, PhoneGap Build uses 3.3.0 version. If you want to continue using this version, once you experience "Build queued" State, quit Dreamweaver and restart.

    On the restart, you'll be able to see the status of success or failure of the applications of the different platforms

    2. If you're ok with older versions of PhoneGap construction, then you can put the number of version 2.9.0.

    Notice that Dreamweaver adds a ProjectSettings and also a config.xml file to the root of the site. To change the version number, open the config.xml file and add the following line, save the file, and rebuild the project...

    Let me know if you face problems more.

    Thank you

    DBC

Maybe you are looking for

  • Server PowerEdge R720 Imaging problem

    Hi guys,. We have a Poweredge R720 I am trying to use imaging software to restore a server that must be upgraded to a Poweredge 2950 server. I've tried Acronis, Paragon HDM 12 and Todo Easus and each of them do not detect hard drives. I have set up t

  • Cell Renderer Madness - Renaun if you see this please chime

    Who needs March Madness when you can have Cell Renderer Madness...

  • Windows 7 freezes or crashes when on google chrome

    trouble with freezes & crashes when I go on the internet with google chrome...

  • removed the cloud creative assistance in the wrong way?

    so I didn't have to uninstall it from the application, I sent the file to the trash and empty the trash. now im stuck with the app list but not records.I tried to re - download but it won't download because the file is already in my computer.Help?

  • How can we request Tune

    Hi allI use Oracle 11iI have a query that takes too much time and its very high cost as well, I need to optimize or grant under query, no idea how can I solve this...Select concept_Un, raw_concept_a, relation_name, concept_b, raw_concept_bof discover