KB2556532 update and KB2563227 failure

Similar Questions

• Install failures - KB973565 (error code 80004005) security update and Office 2007 Ultimate UPG. (1935 & 1310 error codes)

  COMPUTER: CPU & BIOS: Intel Core 2 CPU * address email is removed from private life *; The version of the BIOS/date: American Megatrends, INC. 1101, 07/02/2007
  System name: POLY595695; MFG: ASUSTek Computer INC.
  Memory: 4 GB
  HDD: RAID 5 with Intel RAID Controller: Intel ICH8R/ICH9R/ICH10R / / PCH SATA RAID Controller version 8.8
  ROM: version 6.0.0.1017
  3 Seagate 320 GB hard drives
  SYSTEM MODEL: P5B - E

  DUAL BOOT SYSTEM: Windows Professional XP & VISTA ULTIMATE SP2, Build 6002 6.0.6002 worm

  The RAID system is a failed drive so it's currentl status "degraded".  I installed two new discs and got a replacement 3rd on the way after the latest RAID driver ver. 8.9 to 8.8 for the Intel of current top technical issues site. According to the Intel site, we reported recurring and random disk failure with version 8.9, which they have not been able to reproduce in their laboratory, but say that returning to version 8.8 has solved the problem for users with this problem.

  WINDOWS UPDATE: Follow-up of the troubleshooting steps, but no information on the given error code, 80004005.  This security update is not constantly in the 2 months prior to the update of the change on hard drives or RAID driver.

  OFFICE 2007 ULTIMATE INSTALLATION: Installation product without incident until about 85-90% full, then stops citing Error 1935.
  Error Msg: "Error 1935. During the installation of the component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E} HRESULT: 0x800736B5. »
  System says then it restores changes and then gives the error messge "Error 1310."

  There is no answer to the 1935 specific or code for the 0x800736B5 to HRESULT error messages, but there are thousands of results for the 1935 error messages or 1310 General.  The actions proposed by these results are one) uninstall all earlier versions of Office, including the eligible upgrade software, I've done through uninstalling program and manually; (b) for .NET Framework 1.1 to repair or reinstall 1.1 or install version 2.0.  All THE proposed solutions have been tried, as the software was received on 08-11-09, but all have failed.

  RRBldrs,
  Not knowing all the things you've tried so far is a few things to get started.  Let me know if you did the or not.

  Check your list of installed updates and check that the update does not already installed.

  Clean boot of your PC, then try the update.

  Download the KB directly on your desktop and then try to install.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive message and installation failure error code trying to update wireless driver

  Have tried to update the driver for my latitude d600, Dell wireless 1350 WLAN Mini-PCI Card from the website of dell and installation fails with the error 0xC0000135 code. After the second failure, (update the driver), I uninstalled the driver and reinstalled the driver to gain Dells web site. tried to update and cannot install the update again. The Mini-PCIcard could be defective or is - this software?

  Install .NET

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  MD MOEEN AJAZ KHAN - MCP, N +, A +.

• Windows update errors and install failures - 800706BE

  OPS 32-bit Vista - while trying to install KB947821 - get error code 800706BE I also have norton 360 installed.  Since installing the update for internet explorer 8, with that I started to have some few issues updates, optional and important. Please advise, thank you very much!

  Comment: Probably Norton causing the problem.

  "Make sure your anti-virus is disabled and try the update again, if it still does not try to update in a clean boot environment:

  Test in a clean boot environment to see if the problem is related to other services or programs-

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Click Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  On the general tab, click Selective startup.

  Under Selective startup, clear the Load Startup items check box.

  Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  Click OK.

  When you are prompted, click restart.

  Log on to your account.

  ---------------------------------------------------

  Click on start-> all programs-> Windows Update and reinstall the update/s.

  ---------------------------------------------------

  To restore your Normal startup:

  Click Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

  On the general tab, click Normal startup.

  When you are prompted, click restart. »

  TaurArian [MVP] 2005-2010 - Update Services

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• Firefox can not be updated and do not be installed (no action after unpacking the file or the program update)

  Hi all

  I was unable to update Firefox since Version 17.0, each update attempt failed. The automatic update feature still reported that the update has been without success/failure, then download the new version of Firefox and then try to install it simply leads to inaction after unpacking (running the file). Now, I tried to address this problem by uninstalling firefox and then install the new browser. However, I'm back to where I was decompresses the file and then nothing happens. I am very frustrated as I like the browser and I can't use it anymore. Before, Version 17.0 worked well for me, I simply couldn't be updated. I checked my firewall (windows) and my anti-virus (avast free) program and the program is not blocked, so I simply do not know why I can not update and (re-) install. I would appreciate any solution

  Disconnect for security. Use the SafeMode clean Windows, but from the F8 key. See if you can install Firefox.

  • http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I wonder if somehow, security software is always blocking the installation. Consider temporarily uninstall if necessary security software. No doubt other .exe files run (or I doubt you could do a lot with the computer) and this isn't a problem with file associations have been corrupted.

• HP Pavilion 15-ab150sa: HP Notebook System BIOS update (and processors)

  Hi, I bought the HP Pavilion 15-ab150sa last weekend and have had many problems since getting it. Kept freezing and condensation WiFi shortly after logging in.

  I found there were 6 updates that need running that are not automatically showing until I scanned for them in HPSA.

  Its took me 4 days to get the updates for the most part actually fill and it seems to work a lot better now, however, I have an update for HP Notebook System NIOS update (AND processor) keeps a failure...

  Any ideas?

  Please keep it simple, I'm not very good with technical information. :-)

  Greg

  Hi Greg,.

  Try the following.

  If the update of the bios still work in HPSA, click the Stop button.

  Close HPSA, restart the computer, and then download the update of the Bios from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75199.exe

  Once the download is complete, close other open windows and programs, then open your download folder and double-click the installer to start the process.  The real flash will occur when you restart the machine - do not interrupt it somehow, even if nothing seems to be happening for a while - when it is finished, the machine will load in Windows as usual.

  Note:  If the update option arises as being 'blocked on this device', you will need to contact HP in this regard.

  Kind regards

  DP - K

• How to install this update and resolve problems of USB and the touchpad?

  I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
  Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

  The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

  The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

  This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
  Driver revision history:
  Twinhan VP704A Driver Release Notes
  -------------------------------------------------------------------------------
  Note:
  1. in the event that the system hangs when running with VP704A, please install ULI
  Host USB 2.0 in \ULiUSB20Driver driver

  2. for XP/SP1, please update with the patch in
  

  3. in XP/SP1, update driver will crash the system, while the new facility is ok.
  The trick to update driver XP/SP1 is illustrated in the following steps,
  a. uninstall the driver
  b. disconnect and reconnect the USB device
  c. install the driver
  4 to support the controller remotely, please launch Agent.exe in \Agent.
  Further details at \Agent\Readme.txt

  Known issues:
  1 multi-instance is not supported
  2 remote wakeup is not supported
  3. strong use of the processor from analog video/audio capture
  4. bad Signal using color YUY2 format IST
  5 AV sync if audio captured the wrong filter.
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
  6. noise with analog TV and FM Radio
  (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

  Driver revision history:
  -------------------------------------------------------------------------------
  2005-10-24, version: 1.0.2.8
  Bugs fixed and new features:
  1 is not correctly configured.
  -------------------------------------------------------------------------------
  2005-10-21, version: 1.0.2.7
  Bugs fixed and new features:
  1. the firmware version read FLASH OK!
  -------------------------------------------------------------------------------
  2005-10-14, version: 1.0.2.6
  Bugs fixed and new features:
  1.MUtil - access driver empty part lower part of screen when IST!
  2.MUtil - access HCT pilot check fix crash!
  -------------------------------------------------------------------------------
  2005-10-07, version: 1.0.2.5
  Bugs fixed and new features:
  1 tuner turns off when S-Video, Composite.
  -------------------------------------------------------------------------------
  30/09/2005, version: 1.0.2.4
  Bugs fixed and new features:
  1.agent.exe update for repeat bug!
  2.TI5150 sign up to fix video Format!
  -------------------------------------------------------------------------------
  2005-09-29, version: 1.0.2.3
  Bugs fixed and new features:
  1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
  Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
  2 reset TI5150 when a new frequency is defined
  -------------------------------------------------------------------------------
  2005-09-27, version: 1.0.2.2
  Bugs fixed and new features:
  1. difficulty I2C unstable access on some devices.
  -------------------------------------------------------------------------------
  2005-09-23, version: 1.0.2.1
  Bugs fixed and new features:
  1. analog TV becomes sometimes darker.
  -------------------------------------------------------------------------------
  15/09/2005, version: 1.0.2.0
  Bugs fixed and new features:
  1. difficulty of installation INF for Windows 2000.
  2 FM scan radio policy changed!
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.9
  Bugs fixed and new features:
  1 USB string serial number not visible with USBView, updated firmware required.
  2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
  -------------------------------------------------------------------------------
  13/09/2005, version: 1.0.1.8
  Bugs fixed and new features:
  1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
  -------------------------------------------------------------------------------
  12/09/2005, version: 1.0.1.7
  Bugs fixed and new features:
  1. improve the performance of check channel lock status
  2 pinnacle INF Fix.
  -------------------------------------------------------------------------------
  2005-09-09, version: 1.0.1.6
  Bugs fixed and new features:
  1. Add an audio initialization function.
  -------------------------------------------------------------------------------
  2005-08-31, version: 1.0.1.5
  Bugs fixed and new features:
  1 separation of PAL and NTSC resolution mode.
  -------------------------------------------------------------------------------
  2005-08-30, version: 1.0.1.4
  Bugs fixed and new features:
  1.AvgTimePerFrame.
  2 frame drop.
  3 pinnacle inf file HCT chkinf fail.
  -------------------------------------------------------------------------------
  2005-08-22, version: version 1.0.1.3
  Bugs fixed and new features:
  1. add remote control interface in digital source filter.
  2.A new remote test tool that contains of the source code in \Test_RC.
  -------------------------------------------------------------------------------
  2005-08-16, version: 1.0.1.2
  Bugs fixed and new features:
  1. Pinnacel & Twinhan driver & file reorg.
  2.VP704A_BDA_Test tool, add a test to the system code.
  3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
  4 firmware update
  -------------------------------------------------------------------------------
  2005-08-15, version: 1.0.1.1
  Bugs fixed and new features:
  1 serial number feature is lost when the audio volume of the TV control
  2.RC6A support CIR
  (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
  The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
  EEPROM must be flashed with \Firmware\M9207.bin)
  3 Serieal, MAC address and name of device OEM taken in charge.
  Please see for more details on the \Firmware\readme.txt.
  4 Ioclt example source code included.
  -------------------------------------------------------------------------------
  08/08/2005, version: 1.0.0.10
  Bugs fixed and new features:
  1. increase audio volume analog TV.
  -------------------------------------------------------------------------------
  04/08/2005, version: 1.0.0.9
  Bugs fixed and new features:
  1. analog TV Video mode failed.
  -------------------------------------------------------------------------------
  2005-08-03, version: 1.0.0.8
  Bugs fixed and new features:
  1.off - centerf frequency scan + / 125Khz
  2 difficulty program a copy scanned in MCE.
  -------------------------------------------------------------------------------
  02/08/2005, version: 1.0.0.7
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.6
  Bugs fixed and new features:
  1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
  2. improve the stability of I2C communication.
  3 unify signaling resistance & quality as a THBda ioctl interface.
  4 capture filter lock state control.
  -------------------------------------------------------------------------------
  2005-07-28, version: 1.0.0.5
  Bugs fixed and new features:
  1. the same strength & quality signals as VP7046.
  2 debug build pilot
  -------------------------------------------------------------------------------
  2005-07-21, version: 1.0.0.4
  Bugs fixed and new features:
  1. put the INF update.
  -------------------------------------------------------------------------------
  2005-07-20, version: 1.0.0.3
  Bugs fixed and new features:
  1 improve performance in PCM4
  2 passage of the analog TV Mode to FM Mode failure
  -------------------------------------------------------------------------------
  2005-07-04, version: 1.0.0.2
  Bugs fixed and new features:
  1. production tool FM test OK!
  --------------------------------------------

  And here is the Readme file from the other file in the update?

  ************************************************** ************************************************
  ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
  ************************************************** ************************************************

  ----------------
  INTRODUCTION
  ----------------

  This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
  and Windows XP.

  -------------------------
  CONTENTS OF THIS DOCUMENT
  -------------------------

  1. installation instructions
  2. uninstall instructions

  ----------------------------
  1. installation instructions
  ----------------------------

  (Windows 98SE & Windows ME)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files in your Windows system, and then restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver files to your Windows system, then turn off your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows 2000)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller"and install the driver.

  (Windows XP)
  ULi USB 2.0 Controller has strapped on the system
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -Click "NEXT".
  -This program will install and load the driver and you do not have to restart the
  computer.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.
  -This program will install and load the driver and you do not have to restart the
  computer.
  B.If any ULi USB 2.0 on the system controller
  1. install the driver USB 2.0 ULi
  -Run the Setup program.
  -This program will copy the driver in your Windows system files, before turning itself off
  your computer.
  -Fix the ULi USB 2.0 computer controller card and restart your computer.
  2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
  Host Controller', proceed with the installation.
  -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
  Hub. " Please select "Install the software automatically (recommended)" and then
  Click 'Next' to continue the installation.

  Notice:
  If you can not configure driver successfully. Please restart your system, then follow
  steps to reinstall driver above.

  ------------------------------
  2. uninstall instructions
  ------------------------------

  1. open the "Control Panel" folder.
  2 call the "Add/Remove Programs" icon
  3 choose the "ULi USB2.0 Driver" section.
  4. click on the "add/delete" button to remove drivers.

  -----------------------------------
  Change list:
  -----------------------------------
  1.74
  1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
  2. support all USB2.0 Host Controller.
  1.73
  1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
  2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
  3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
  4 solve problem as wirless lan will disconect when the plug in usb device.

  1.72
  1 fix that system crash when HD USB copy large files.

  1.71
  1. improve the management of power in Win98 / Me.

  1.70
  1. improve the devcie detection function.

  1.62
  1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

  1.61
  1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

  1.60
  1. in support of functions power management when a HUB with the USB plug in device
  a root HUB.

  1.57
  1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
  2. fix audio problem that can not display smooth when peripheral USB connect to the system.
  3. fix system cannot detect DVICE USB when the USB device attached to the system in
  suspend mode.
  4 fix when root USB HUB have a full load, USB HD sometimes
  failure of the transaction.

  1.56
  1 fix that device of DVD decoder cannot display correctly.

  1.55
  1. fix OTI USB 2.0 drive hand cannot detect question.
  2. attach the USB mouse cannot be used after the resumption of hanging.

  1.54
  1. to improve the safety of the driver.

  1.53
  1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
  2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

  1.52
  1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
  automatically fix file system errors
  2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

  v.1.51
  1. to improve the compatibility of USB 2.0 card reader.
  2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

  v1.50
  1. improve the transfer block

  v1.48
  1. difficulty of installation of the USB 2.0 LAN driver hangs up
  2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
  3. fix some laptops starting hanging Win98SE

  v1.47
  1. improve the performance of bulk transfer.
  2. fix the failure of USB 2.0 Preview in bulk webcam.

  v1.46
  1. support USB 2.0 and 1.1 devices isochronous
  2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
  3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
  4. improve the capacity of the device detection in Win9X / ME

  v1.45
  1. fix system hang up when the mode standby ACPI.
  2. attach the mouse sometimes does not disappear when it is unplugged.
  3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

  v1.44
  1. composite crutch
  2 improve the detection of devices

  v1.43
  1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
  2 difficulty at high peripheral speed detected as full-speed device
  3. fix some problem of failure detection USB mouses
  4. fix some problem USB 2.0 Hub failure detection
  5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

  v1.42
  1. fix PC Card eject hang up in Win98 / ME
  2 difficulty of interruption/resumption hang up in Win98
  3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
  4. fix some failure detection of PC Card USB 1.1 devices

  v1.41
  1. Add new feature that system can install the driver ahead of the device is plugged in.
  2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

  v1.40
  1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
  2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

  v1.32
  1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
  If the path of the OS is not c:\windows.
  2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

  v1.31
  1. Fix problem that driver cannot install on Windows 2000.

  v1.30
  1 fix than Win9X / shows ME no USB 2.0 hub.
  2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
  3 Fix problem that sometimes when you click on "search the hardware changes.
  for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
  file is not found.
  4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
  verison of ULi EHCI controllers devices are connected and disconnected.
  5 install the driver support for several features of controller EHCI ULi existing on
  system at the same time.
  6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

  v1.20
  1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

  ULi Coporation. (ULi) web sites:
  http://www.Uli.com.tw/ (Taiwan)

  CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

  I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

  It is said above 2 relevant and 1 right ANSWER available...

  I'm new here, so anyone could direct me to these answers?

• Apple TV (3rd generation) software update is a failure

  Apple TV (3rd generation) software update is a failure.

  • The software version is 6.0 (6646.65).
  • Model MD199LL/A
  • When I go to settings-> General-> software updates. It shows that there is an update of software available.
  • When I select "Software Update" and then "download and install" on the next screen, it is said to "Estimated time remaining", and then displays the message "the update has failed. The update to the Apple TV could not be downloaded right now. Try again later. »

  6 iPhone and Macbook Pro screen mirror does not work and I guess that's due to outdated software.

  Please help on how to fix this or how tr.

  Restore option does not as well... It gives the same error.

• missing loops in Logic 10.2.1 and download failure

  question of part 2...

  QUESTION 1: WHERE ARE MY MISSING LOOPS? HOW CAN I FIND THEM, RETRIEVE THEM, DOWNLOAD THEM?

  (1) my logic Pro 10.2.1 (updated 20/01/16) is missing a bunch of loops from the loop browser.  They are grayed out and will not play.

  For example, these loops are grayed out:

  "Amazing" spoken

  'Attention' spoken word

  Asian gamelan 01

  Asian gamelan 02

  03 Asian gamelan

  04 Asian gamelan

  Asian gamelan 05

  Asian gamelan 06

  but Asian gamelan 07 thru 21 are NOT grayed out, they are beautiful!

  I know that these missing loops were working in Logic 9. Recently, I deleted Logic 9 since I haven't used since getting Logic Pro X in November of 2015.

  I probably have these missing on my Time Machine backup loops if all the missing loops were present in Logic 9.

  But in the last days (before the release of 10.2.1) I made sure I had downloaded all additional content for Logic Pro X. And it showed as "installed".  Then after getting 10.2.1 today, I tried to download ANY extra content again. IT all downloaded fine, except for "" Download All Additional sounds '... "  (See Question 2).   So question 1 is: WHERE ARE THESE MISSING LOOPS?  IF YOU DOWNLOAD ALL THE ADDITIONAL CONTENT FOR 10.2.1 SHOULDN'T ALL MY LOGIC LOOPS 9 (IN PARTICULAR THOSE LISTED ABOVE) APPEAR AND WORK?

  QUESTION 2: WHY DOES "Download All Additional sounds" (only 18.3 MB) systematically omitted, 5 seconds remaining, with a fake message "check your internet connection"?

  After graduating 10.2.1 I made sure I downloaded all the extra content. It shows installed, with a

  exception: when I try to "Download All Additional Sounds", it downloads right up to the mark of 18.3 MB, (which is the total size to download).

  with 5 seconds left, but then always (tried 10 times) fails with this message: "Logic Pro X could not complete the download. Check your internet connection and try to download again. "The internet connection is fine and not at all abandoned.  I checked all options 'go to sleep' are on 'Never', and I ran check permissions and repair permissions in disk utility.

  I see in the release notes that the programming to download additional content has been changed to 10.2.1.   I can't help being suspicious

  There is a kind of too aggressive code that is causing this failure of the download.  But I can always try again in the morning.  It is only

  18.3 MB for the "Complete Sound Library", all the other many GB of extra content download OK, they all show "installed".  I'm only

  of the problems (that I can't fix) with the option 'Download All Additional sounds.

  Thank you so so so to help them with my missing loops and download failure.

  Wade Cottingham

  Dallas, TX

  I had grayed out like many loops "re-index all loops" in the menu at the top of the loop browser it cured me.

• I need to update and get error code80072EFE

  Please advice what to do like pc runs very slow and have to restart several times a day because of the above error

  Please advice what to do like pc runs very slow and have to restart several times a day because of the above error

  Hey josief

  Download update and scan with the free version of malwarebytes anti-malware in safe mode with networking

  http://www.Malwarebytes.org/MBAM.php

  You can also in safe mode with network download and run rkill to stop the problem before you download and scan with malwarebytes process

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that didn't he corrects not reposting in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Is windows update causes the failure of the system?

  I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

  No, do not keep your computer fully patched all the time causes more problems.

  4 steps to protect your computer
  http://www.Microsoft.com/security/pypc.aspx

  NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

  The above has applied to WinXP SP1 computer your aunt since October 2006.

  For you and your aunt...

  HOW to get a computer WinXP SP1 or SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Download updates and turn off

  It seems every other day or so, if I look at my Start button, there is a flag and the note 'download' updates and stop.  Sometimes, I would like to know what are the updates, most of the time I'm not particularly excited about stopping.  When I click, it always says something like "update, do not close or disconnect.  "Download 1 of 21 updates... etc.  It seems that its updates always 21, several times a week.  Can it actually be that many updates?  Why always 21?  Is it always the same 21, but there is indeed an applicator of failure and really not take updated the last time?  I'm on Build 6, SP2, Vista.  Y at - it somewhere that I can go see those updates in a dated list so I can check that they are actually downloading and installing?
  Control Panel of configuration/security/windows update/view history update, the list shows dozens and dozens of attempts updates, for most successful before mid-December ' 09, and almost exclusively chess after then, with error code 80070490.
  On www.microsoft.com/communities/newsgroups/...etc, there is a list long and painful things to do to repair the engine update or reinstall Vista.  I don't really do either, it comes to my work computer, don't want a lot of downtime.
  Help?

  Updates are normally downloaded and installed on the second Tuesday of each month; with the exception of very serious security updates; who are rare.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

  Read how to change your settings to update to the above link:

  Change the settings of Update Auto Update for 'check for updates but let me choose etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For Windows Update issues:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Qualcomm wireless update and now wireless not work grrrrr

  Today, HP said that it is an important update for my wireless adapter and did an update via the HP Support and now have a red triangle with a! inside her and now my wireless died refuses to find any wireless router and the failure of any attempt to make it work.

  Name of product: notebook PC HP Pavilion g6

  Product number: C6M50EA #ABU

  8.1 Windows 64-bit

  Qualcomm-Atheros Driver Installation Program - Qualcomm-Atheros - 10.0

  Qualcomm Atheros Extensible Wireless LAN device - Qualcomm Atheros Communications, Inc. driver.  -10.0.0.264

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01 hardware ID

  Any ideas how can I fix?

  Thank you for the information. Based on this information, I have a few troubleshooting steps more than I can suggest:

  1. I would like you try ping on your router. Information on how to perform this task are described here: How to Ping the router of network Windows.

  2 take note if there is no packet loss, or if you are able to accomplish this task.

  3. Once this is done, I would like to that use you HP Support Assistant to test the capabilities of this computer network. To do this:

  -Open HP Support Assistant and click on "Internet and security.

  S ' ensure you are on the Internet tab, then click on "HP network Check."

  -It can generate a confirmation screen; Simply click "Next".

  -This diagnosis checks certain conditions and variables. Ultimately, results will be posted. Please take note of any errors and the potential causes (you can click the arrow next to root causes for more information).

  I need this information if the problem is not resolved. As an additional troubleshooting step, I suggest that you perform a system restore. I say this because you said that the problem occurred after an update. For more information about how to perform a system restore, please see this Microsoft Web site: How to refresh, reset or restore your PC

  Please note: a system restore will return the computer to Windows 8. While in Windows 8, all of your Windows updates and install all the necessary drivers (drivers Windows 8 on this computer are found here: drivers PC laptop HP Pavilion g6-2213sa). Please check if the computer can connect to a wireless network at this point.

  Once you have verified this, you can return to the 8.1 Windows computer if you wish. Please provide all your results.

  Mario

• Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

  I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

  1 PC is powerful enough with i7 and 16 GB chip.

  2. new SSD this week.

  2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

  3 Ran install successfully and signed using my Microsoft Account.

  4 tried Windows Store for Windows 8.1, but said I need updates.

  4 Ran Windows Update in Control Panel.

  5. Windows update found 127 updates and they failed with error code 80248007.

  I don't understand how I can get these failures with a new facility.

  Any help will be greatly appreciated. Thank you all in advance!

  Hello

  Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

  They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...