KB2596856 failed 80070641

Similar Questions

• Invite command repeated to install KB2596856 (a security update for the 2007 Microsoft Office suite) and the installation fails.

  Original title: update of security for Microsoft Office 2007 suites KB2596856.

  Windows Vista. Update of security for Microsoft Office 2007 suites KB2596856. Update since August 15, 2012, repeatedly fails. Error reported are not. I tried Microsoft Fixit.  Reports, he agreed, but didn't. Tried to disable the firewall in Kaspersky. No effect. Can anyone help?

  I just received my post of October 8, taken over by you on 5 December and assume that your answer could not transmit. Thanks for the attempt and I would be grateful if you can get your answer for me. The current situation is that I stopped the repeated update and had no problems so I can live with the status quo. It may be that quite simply, the update did not apply to me or Microsoft have resolved anyway. Thanks again.

• updates fail with code 80070641?.

  19 updates that keep a failure, and I get the error 80070641 and 641 code which is listed as an unknown error code and can't find any info in the help section of windows.

  Hi, Cheryl1969,

  Try this:

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.

  2. to command the prompt type the following command and press enter:

  3 stop msiserver net

  Note: This will effectively stop the Windows Installer service. This service charge demand manually stop it does not alter the computer.

  4. start Windows Update, and then try to install the updates previously failed.

  -Jared - M

  How to troubleshoot incidents to update your installation of Office on the Office Update Web site

  http://support.Microsoft.com/kb/304498

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-GB

  Run this tool

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  Restart Windows Update

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Get Code 80070641 KB2596785 installation, installation fails - any solution

  Get Code 80070641 installation KB2596785 "Security update for Microsoft Office 2007 suites", installation fails - any solution

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run Windows Update to convenience store and check if it helps.

  Open the Windows Update troubleshooting tool:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  How to fix problems connecting to Windows Update or Microsoft Update:

  http://support.Microsoft.com/kb/818018

  For more information, see the following Microsoft article.

  http://support.Microsoft.com/kb/304498

  Hope the information is useful.

• Windows Update fails to install KB974234 and returns the error code 80070641

  Previous issues with the installation of the updates or with those who just do not had are released on 11/10, but cannot install KB974234 (published on 10/13).  Update returns the error code 80070641.

  I am running Vista Home Premium with Office 2007 SP2.  Diagnostics Office finds no problem.

  Following further discussions, I have (among other attempts): stopped the Service Windows Installer (returns this message "the Windows Installer service is not started"), tried the Patch Registration Cleanup Tool (wouldn't not - said "a productcode must be determined"), downloaded manually updated.

  Any help would be appreciated!
  Dave

  Hi Dave,http://support.microsoft.com/default.aspx/kb/818018/

  http://support.Microsoft.com/kb/304498

  Hope this can solve your problems,

• Windows update fails with error Code: 0 x 80070641 and 0 x 641

  All critical updates are now not to install.  I usually get two Error Codes:

  Error code: 0x80070641Error Code: 0 x 641

  The system ask you to send me the considerable detail of Microsoft on these errors, but I don't know where these files are stored.  I think that I am submitting is done anonymously, so I've never heard anything back.  Help, please!

  Check out my answers here (http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-fails-even-after-running-fix/e1cd6c26-d1b2-4116-8c41-1c22a1d0b543). I think that I have found a workaround.

• Windows update Setup fails with error code 80070641.

  my laptop will not install updates. How can I install updates?

  I tried all the things that windows says to do but none of it works

  have now 19 important updates that it will just install, any help would be greatly appreciated!

  Thank you

  Original title: Vista-error code 80070641 641

  See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/updates-not-responding-error-code-80070641/446c108b-3222-46f9-ad2c-05dd231fd071

  J W Stuart: http://www.pagestart.com

• Failed to update 80070641

  Hello

  Are you logged in as administrator - you run the patch by clicking right - RUN AS ADMIN (if possible) tool
  and it is also possible that you don't need the patch tool.

  Some of these updates may not be necessary either - you can control panel - Windows Updates - right click
  on and HIDE. And sometimes updates will offer the wrong version, so don't forget to download the right pair
  for your Windows and the software installed.

  The product code is usually on the bottom or rear of your machine - they can also get it for you
  as it is the system, and I wouldn't change it. It is very possible that the manufacturer of the system uses a production «»
  Code"when they put Windows on your system.

  Vista product key
  http://www.Vistax64.com/tutorials/85023-product-key-number.html

  Magic Jellybean Product Key Finder see Web site for many products.
  http://magicaljellybean.com/KeyFinder/

  Finder Windows product keys
  http://www.rjlsoftware.com/software/utility/winproductkey/

  Window Vista and product keys Microsoft Office - WinGuggle
  http://unlockforus.blogspot.com/2008/01/WinGuggle-get-your-Windows-Vista.html

  How to see the Vista product key
  http://www.Vistax64.com/tutorials/85023-product-key-number.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

  Rob,

  Thank you very much for all your help, much appreciated.

  However, since the execution of all these weird and wonderful packages that I seem to get more funnies on my system. Trying to download pictures from my camera photo using my usual Center solutions HP Officejet and the copy just would not work. I tried Ulead Photo express and the package supplied with my Pentax camera and no force... to receive very strange messages. When I try to run some software, I get a message indicating that a previous installation of Windows Office 2007 did not finish successfully. It would seem that I have installed or uninstalled a few or other software that causes incompatibilities with existing software. Thinking it may be that PhotoImpact, the software provided with a slide scanner and film I bought recently and not could not get to work with the HP photo on the same system software. I used Revo Uninstaller to remove the program and the option to clean up the registry entries of the remains of... Now, I suspect that my registry me am a bit messed up.

  Result is, I think I'm going to try to restore my computer to a backup (hopefully) until I started having all these funnies... keeping my fingers crossed!

  Thanks again

  Piet

• Help, please! error 641, 80070641, code 80070490 fail 76 updates

  Hello

  try to install updates 76 and I get three error codes
  Thanks in advance!

  Hi thadjones,

  Follow the troubleshooting steps in the links below to resolve the error 641 and 80070490 uses this document.

  Reset the Windows Update components

  System analysis tool

• How to fix error 80070641 and 641?

  To the right,.

  I have a few annoying problems with windows Vista [to know, update and install]. Whenever I try to install ANY update, it [windows update] fails and spits out 2 641 and 80070641 error codes.
  Which is annoying, is that most of the errors is failures of installation for MS Office 2007 and 2003 features [I do not use any that OpenOffice is used]. I tried to uninstall using the Add/Remove Programs Control Panel and the walkthrough [which includes the removal of keys from registry and iinstaller module, but in vain.
  I tried to stop and start the Windows update service, nothing helps.
  I tried to re-register the DLLs, nothing helps.

  There is no work around for this problem?

  Advice or assistance which may be made will be VERY appreciated [in other words, help me, please and thank you!]

  Hello Not_Richard_B_Riddick,

  Welcome to the Microsoft Answers Forum!

  Please provide us with more information.

  (a) may I know what updates fail?

  I suggest you to check the updates are at the origin of the problem. Please check in windows update history to verify.

  Click Start > type of search box in windows update > windows update-click > click View history of update (left) and search for updates.

  I would say as reset you windows update components and then try to install updates and check if that helps you.

  Please see the link below to fix:

  http://support.Microsoft.com/kb/971058

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

• error code 80070641

  updates not responding error 80070641 code

  Hello

  Google the question arises a lot of possible corrections

  Updates Windows 80070641
  http://www.Google.com/search?hl=en&q=Windows+updates+80070641&start=10&SA=N

  Also, you can start a free Incident report

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  How to get help from the MS Support

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Support for Windows Update:
  http://support.Microsoft.com/GP/wusupport

  For more information about how to contact your local Microsoft subsidiary
  for security update support issues, visit the International Support Web site:
  http://support.Microsoft.com/common/international.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update, error: 80070641, Security Update for Microsoft Office system 2007: 2289158 KB

  I had some trouble installing the above update (security for 2007 Microsoft Office system update: KB 2289158). When the update fails, the error I get says:

  Code 80070641 Windows update encountered an unknown error

  When I click on the link below the error that says "get help with this error, a Windows Help and Support window opens with this in the search box:

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"

  I did some research and it seems that this error indicates a problem with the installer, but I tried several proposed fixes and none of them work.  Defective patches include:

  -modification of the parameters of service by Windows install to start automatically and then start it manually, and then try to update

  -With the help of the (Administrator) command prompt to manually start windows update, and then try to update

  -Use of the (Administrator) command prompt to manually stop the windows update, then try to update

  -With the help of the (Administrator) command prompt manually update windows, then rename the files that have been damaged (sorry, I don't know more than what files), and then try to update

  -Disable UAC, then try to update

  -Use of the Download Center Microsoft to download the specific update and try to install.

  What's weird, is that it is the only update with the problem, I can and have installed every update that was shown to me.  Recently manually, I started Setup of windows with the command prompt, then run the update. Later, I tried to stop the service and restart, but the service was already stopped. It seems that the installation of windows service is stopped during the update.

  I'm running a Windows Vista x 86 machine.

  Any help will be appreciated.

  You receive one or more of the following error messages:
  http://support.Microsoft.com/kb/818018/en-us#appliesTo

• Windows 7 - error Code: 0 X 80070641 (cannot install the Office updates)

  Hello

  I had problems with updates of Office 2007 security for some time.

  the error is usually:

  Log name: System
  Source: Microsoft-Windows-WindowsUpdateClient
  Date: 2010-09-17 12:09:01
  Event ID: 20
  Task category: Windows Update Agent
  Level: error
  Key words: Failure, Installation
  User: SYSTEM
  Computer: Odin1
  Description:
  Installation failure: Windows failed to install the following update with error 0 x 80070641: update of security for Microsoft Office Outlook 2007 (KB2288953).
  The event XML:
  
   
     
      20
      0
      2
      1
      13
      0 x 8000000000000028
     
      254092
     
     
      System
      Odin1
     
   
   
      0 x 80070641
      Update of security for Microsoft Office Outlook 2007 (KB2288953)
      {B142AE09-D79A-47D3-9DD6-4AE3FC3FAF69}
      100
   
  

  Yesterday an Open Office installation failed and starts a BSOD on Microsoft Office Accounting 2009 is no longer.

  The problem is reported as being:

  Signature of the problem:
  Problem event name: OfficeAccounting2
  Signature of the problem 01: 4.0.3610.0
  Signature of the problem 02: BadImageFormatException
  Signature of the problem 03: reminder
  Signature of the problem 04: .ctor
  Signature of the problem 05: b35d386f
  Signature of the 06:809 problem
  Signature problem 07: 1
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 2057

  More information about the problem:
  LCID: 2057

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Microsoft Office Accounting gives only the option to uninstall (reinstall is greyed out).

  I tried to repair Office 2007, but it fails.

  The system is Windows 7 Pro 64 bit.

  I searched high and low but have been unable to find out very useful on error 0 x 80070641.

  I'm starting to think that a repair (or full) install is necessary.

  Help!

  PS:

  It does not help:
  MSIEXEC /Unregister
  MSIEXEc/regserver

  Slaughter of the Windows Installer Service does nothing.

  Suspension of Kaspersky Internet Security does not seem to do anything.

  Hello

  It seems that there is a problem with the update of Windows. Click on the link below.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Follow the steps mentioned in the article below.

   

  Method 1:

  I suggest to reset the Windows Update components and then try to install the update on the system and check if you are able to install it or not.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Method 2:

  I suggest you download the update from the Microsoft site and then install it on the system, but before that, uninstall any old version of the update is installed on the system (KB2288953) and then I you suggest to the clean boot the system and then install the update on the system.

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Step 1:

  I suggest do a clean boot and check if you are able to install windows updates. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Download the update from the link below.

  Update of security for Microsoft Office Outlook 2007 (KB2288953)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=6009d507-135C-4CE8-A830-925134f214dc&displaylang=en

  For more information on the update click on the link below.

  MS10-064: Description of the update of security for Office Outlook 2007: 14 September 2010

  http://support.Microsoft.com/kb/2288953

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error code: 80070641 (cannot install updates)

  window update error 80070641... keeps failing three updates, I tried one at a time, in different orders etc.

  See, it's that this thread is relevant:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f9774eae-0d84-44B8-B23F-a053754fc4a7

  TaurArian [MVP] 2005-2011 - Update Services