Flashing LED - delay microseconds

Similar Questions

• Xperia Z2 orange flashing led when it is connected to the magnetic charge lead

  Hey guys. I bought this phone off of a friend. His three months and works very well. But the other night, I accidentally put the magnetic port on the back and the phone is completely dead. I panicked and I tried every possible combination. I finally got a red when I plugged it into the microusb port. He turned in 10 minutes as usual.

  Now, whenever I have fix the magnetic cord (correctly) I get a flashing led orange and the unit charge at all.

  What is the flashing orange led average? Warranty covers the magnetic port? I hope someone can help me

  Hello everyone. I have problems with the magnetic charge on my Z2 port. He simply not to charge the device. He also was heat when he was in charge via USB. Sometimes, it would not even load!

  I was trying to just live with it until one day the phone turned off and never started upward for about a day.

  I knew at that stage he had no choice but to request an RMA number for these issues.

  When I called to tell them my problems, I told them specifically 'THERE IS a PROBLEM WITH THE MAGNETIC PORT', 'THE PHONE REFUSED to LOAD SOMETIMES' and 'THE PHONE HEATS DURING CHARGE'.

  The representative on the other end told me several times that he understands the problem and they will be addressed when he arrived at the repair shop.

  So, I packed the phone upward and expelled from Ontario (shipping cost me $40) and thinking that once he comes back, it'll work like it should.

  ---

  It's where I've never been more wrong.

  I'll be back on the phone today and it opens as soon as I could.

  First thing I did, is trying to turn it on. Absolutely nothing. No light, no low battery screen, nothing.

  So when I got home, I plugged the thing in a USB AC charger. The first 10 minutes, that there was only one red LED and nothing else.

  After 10 minutes, I could see the green of the battery on the screen.

  Again 5 minutes later, I was able to turn the phone on. He was sitting at 2%.

  What makes me believe that the phone was left or COMPLETELY discharged before shipping. These people in repair facilities don't know how harmful it is for a battery to be discharged to comepletely?

  ---

  The second and most outrageous of the thing is the main reason for the phone was sent he was not yet fixed!

  I tried to plug in the charger magnetic port (with a spare cord, as well as the docking station) and the phone does EXACTLY the same thing!

  In fact, it is an exact quote from that work says:

  "THE PHONE IS IN CHARGE AND WORKS WELL. "PLEASE SEND TO THE CABLE USB AND CHARGER IF PROBLEM P-<- they="" didn't="" even="" finish="" the="">

  "Software update, direct call, past quality control."

  I am so totally outraged and disgusted with Sony now.

• BlackBerry BlackBerry Curve Smartphones - missing icon and flashing LED

  Hi, I just got my BlackBerry Curve yesterday and have two questions that left me mouth gaping so far.

  (1) my menu has no icon "Settings and tools", I tried the option "Show all", still not there. How to do it?

  (2) I have retrieve email on my PC for the most and that you want to turn off the blinking red light because I get lots of emails and the light is constantly flashing and boring.

  Thanks in advance. Andi

  EDIT: Post was shared by another thread, edited title

  God_Graham wrote:

  You can turn off the red flashing notification by going to

  Messages > (key Blackberry) Options > General Options > display indicator new Message 'NO '.

  This will cause the unit to not display the red flashing LED and you will not see a red * click the e-mail until the upper part of the screen.

  The icon options should be on the device, if you are adamant that you can't find it then I would suggest that reload the software on the device.

  Sorry, but will not disable the led red LED, GRAHAM of GOD. Only, it will disable the indicator red star on the e-mail inbox.

  To disable the LED indicator, edit your profiles.

  1. Select the profiles icon

  2. a box will appear where you can quickly choose between Loud, vibrate, quiet, normal, phone only, and outside.

  3. If you want to change the notification of messages assigned for device applications, and then select the last option, advanced options

  4. Select the profile you want to change. (Loud, vibrate, quiet, Normal (default), phone only, Off)
  Note: on the 8100, 8800 and 8300 models: do not click on the trackball. Instead of this, click on the menu button to the left of the trackball).
  Note: The profile that is in use will tell: (active)

  5. you will now see a list of all applications that can have an assigned tone (browser, calendar, level 1 Messages, Messages ([email protected]), Messenger, MMS, phone, SMS, job ect..)

  6. Select the application you want to change the tone / in this case, notification Messages, or your specific e-mail address

  7. you can now edit the tones of the case and Holster / notifications.
  (a) select between: none, Tone, vibrate, vibrate + tone
  (b) select the range that you want to use
  (c) Select Volume (the options are mute, low, medium, high, climbing)
  (d) to select the number of beeps (the options are 1, 2, 3)
  (e) select Repeat Notification (options are None, flashing LED)
  (f) if value vibrator or vibrate + tone and select number of Vibrations (the options are 1, 2, 3)

  8. repeat a to e for each of the applications set out in number 5 above

• BlackBerry Smartphones flashing led

  How to turn signal flashing led?

  The answer to this depends on what color it flashes.

  If it is red, it's for messages. Go to profile profiles/advanced/active / and change 'Notification to repeat' to none. You will need to do this for each email, sms, mms, telephone, etc...

  If it is green, go to Options/screen & keyboard/light cover and change it to off.

  If you want to disable the blue for bluetooth connection, go to Options, Bluetooth, Menu, OPtions and change LED indicator connection disabled

  Amber is for low battery, either disable or load the BB

  That's all I can think about, but I feel that I'm leaving something... If I did, I'm sure someone will jump in and help.

• Satellite Pro 6100 will not turn on - flashing LED

  Hello

  I have a probelem big, my Toshiba Satellite Pro 6100 lights so I decided to buy a new motherboard @ ebay.

  I have to build in and all I get is an orange error code. So I decide to make me buy a testet PCB (Powerboard) on Ebay, then the same thing! Then I bought a second Geforce but the same error code! So I all exchanged but the processor and I'm ascendant to buy a second to test or do you know Whata´s evil?
  I don't think that the new parts are broken!

  The error, the code of the orange Led is 01000011 or short, long, short, short, short, short, long, long and I did not see what maybe the problem!

  Sorry for my broken English I come from Germany!
  Hope for answers and greetings

  problemman

  Hello

  How do you know what the flashing of led said you? You are a sort of technician? How can you know that the "blink" (long, short) are 0 and 1.
  Do you know how to assemble the circuit board and don't you know that the things you have take care? Who PCB´s that you have exchanged?
  You said:

  Hand and VGA

  but the powerpcb too? And how do you know that the PCB´s are ok? Because why someone is selling you that with the 'work' of description?

  Would appreciate some feedback from you

  Welcome them

• Re: Portege M100 - does not start, second orange flashing LED

  My trusty M100 has developed a serious boot problem. It will not run games just the bios the second (on/standby) LED flashes orange and throw the fan. The RAM and CMOS battery tested OK (of a 2nd machine). By pressing ESC, F1 or F12 just gives a beep. No way to access the Bios Setup. All thoughts

  Hey,.

  Nice work you have tested other RAM modules in your laptop Portege because that would be my first suggestion other testing modules RAM :)

  In my opinion it s a serious as the motherboard or the CPU but without diagnosis hardware malfunction special tools it of not possible to say more on this subject in particular on this virtual path. If you need to contact an authorized service provider and ask for help. The guys have good diagnostic tools and can help you get rid of this.

  If you don t know where the closest to the ASP's, take a look at the Toshiba page!

• Satellite Pro L300 starts flashing led no-battery

  Hello world

  My Satellite Pro L300 stopped working suddenly: nothing terrible happened, such as fall or other accident, so I can't explain what went wrong.

  The situation is: I have the laptop with the battery inside and connected to the power cable. I press the power button and battery led 5 times with the orange light just flashes. It doesen't start, not even the fan, just stay still. Same thing if I disconnect the power cable.

  If I remove the battery it doesn't blink even led orange.

  Does anyone know what could have happened?

  Thank you very much and sorry for my bad English!

  Silvia

  Hello Silvia

  I can't say for sure, but power led flashing is typical when there is a problem with power supply and electronic power supply.

  If you cannot start the laptop with AC power only (remove battery) then you need professional help with this.
  Sorry, but I m afraid there is nothing you can do about it.

• Satellite Pro M30 is suddenly off - flashing LED orange

  Hello

  suddenly, my cell phone is turned off. He wasn't on battery, not on the DC - cable.Now, I can't turn it on and the DC adapter does not help, it is not recognized. The 400 p LED flashes orange 8 times in the following code: long-short-short-short-long-long-long-short.

  Which means, that I am I supposed to do now?
  Can I use another DC-cable from any other laptop to check if it works then? Or it will cause more trouble?

  Thanks for the help!

  Jana, Germany

  HI Jana,

  Code orange flashing is an indication of error which can be diagnosed by an authorized Service partner. It usually indicates an error (hardware) in a component in your laptop. I do not think that you will be able to fix it yourself, but you can try a few things like the re-allocation of places the HDD, RAM etc modules.

  Good luck

• Tecra M9 - will not power on and flashing LED

  Can someone tell me where I can find a list of what means the various sequences of flashing of LED on a Tecra M9?

  I have one that will not be running at all and the power light flashes a particular model of amber.

  Toshiba Tecra M9
  PTM91E-04R03TEN

  Hello

  I think that such a list of error codes for the LEDs are not available. I've never seen such lists on the Toshiba site, I guess they are no longer available to the authorized service provider.

  But you can try this: remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start the laptop.

  If it doesn t work an ASP needs to ask for help. They can give you professional help and fix it.

• T420s no power, flashing Led power - does not start

  My 2 month old T420s refuses to boot from this morning.

  After pressing the power button, it starts flashing Alternatively the light of the power button and the LED fingerprint reader.

  Nothing else happens, no fan starts to run, or anything else.

  I have not changed anything since yesterday when it is started without any problems.

  Anyone know what this could be?

  
  

• Flashing LEDS with digital control

  Hello

  I want to do a simple program that goes like this. I have 2 digital controls and 2 comparisons. 1 digital will compare if the number if there is less than 50. Second comparison if it is longer than 50. If less than 50, according to this number LED is blink your eyes upward and will stay on. If the second number is greater than 50 the LED belonging to this number is then blinking and will remain lit. NOW...

  If one OR both of these lights light up, a THIRD light should BLINK automatically. If the two first two traffic lights are off, then the third should stay off.

  I tried using shift registers and a deadline for the delay, but I'm stuck.

  Any help would be great. Thank you!

  Thuba25

  First, you must modify your code for an interactive real state machine. Your code is inside-out.

  Currently, the controls are read once at the beginning of the program and then never.

  • Do not use internal loops. Use a single outside WHILE loop that encompasses all of the code.
  • Get rid of the stacked sequence, she is useless and obscures just the code.
  • The case structure belongs inside the loop and not vice versa.
  • Read the commands with each iteration and decide depending on their value.
  • ...

  See how far you get... Good luck.

• Simple simulation Flip Flop. Flashing LED problem

  Hello!

  I have a problem on the simulation of a circuit simple flip flop. The output is connected to a LED for the indication of the output. However, the lights just keep blinking which gives me the impression that the output is not stable (which from my analysis, the production should be stable). I'll post a picture and the file multisim for you to see the circuit. Thank you!

  I don't have a Multisim, so I can't comment on the issues of simulation directly.

  I was about to raise the issue of V/15 V 5.  As well, a typical LED work to 1.6 to 3 V according to color (and thus the composition of semiconductor). Try LEDs by car directly from the output of a 4011 will cause problems (in a physical circuit). The current Ioh source for the 4011 is 8.8 my typical and 3.4 my minimum at 15 V, assuming the Voh = 13.5 V.  A typical LED voltage current could rise to 32 my (~0.5 dissipation W!) until the device goes up in smoke! But with tension that low, the logic of feedback will not work because the output voltages will always be below the other door entries.

  The simulation does not reflect accurately the limits of current and voltage outputs.

  When I put in place a fast simulation of logic in LabVIEW, I find that there are some unstable States. This logic includes a delay effect, but assume ideal logic levels.

  Lynn

  

• Pavilion DV7: Flashing LED to the AC port

  Hi, my laptop has recently closed down and will make is no longer on. The battery level is zero, but when I plug in the power cord, the indicator light flashes red and white and the battery does not charge. I tried the hard reset without success, someone has any ideas before you start putting money in my machine?

  Thank you

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP
   
  It seems that you are not able to turn on the laptop and tried to solve the problem
   
  Please perform steps listed to find out if it is a hardware or software problem below:
  1. remove all cables and devices, disconnect them and try to turn on the device
   
  2. check the LED light situation and ensure the action of the spring button / stop is normal
   
  3 Exchange with a well known power cord and the AC adapter
   
  4 Pack no adapters are available, check if the power adaptor is slightly warm
  Note: This will give us an indication that the power adapter could be good
   
  5. do you know if the laptop was in battery or power adapter when you used the last time
  Note: Make sure that there is no spill of liquid or cutting
   
  6. check if the Port of the AC adaptor is loose/broken
   
  Note: If the laptop is not lit even with a well known power adapter this confirms the hardware failure with the system board or power DC Circuit
   
   
  Hope this helps, for other queries in response to the post and feel free to join us again
   
  * Click on the button white Thumbs Up on the left to say thank you *.
  Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem.
   
  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• What two measns of flashing LED?

  I have problem with my E1-530.

  yesterday when plug-in adapter, then the power led and battery led start blinking and no charge battery. Now I have the AC adapter / CC pluged and still not in charge and running on battery power. Without battery will not start.

  I don't know about the flashing lights, but based on what you say, it looks like you need a new power adapter.  If you decide that out, then it is possible, the converter of power on the motherboard may be bad.

• Flashing LED and black screen HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  HP Pavilion dv7 - 3111ea Notebook PC/entertainment

  Processor i5

  4 GB OF RAM

  NVIDIA Geforce 2 GB VGA

  OS: WIndows 7 64 - bit

  I have a BLACK SCREEN (NOT SURE if IT REALLY TURNS ON or not) once I turn it on. The NUMBER of CAPS & LOCK lights flash three times with three second window and automatically shutsdown and turns on automatically. The LEDs blink with three seconds apart, keeping the machine on constantly.

  After checking according to this link

  http://h10010.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01732674&product=1132551

  Checked

  Adapter CA / CC -works great

  BATTERY - does not load

  IT worked well had no warning on the battery (after a few days after the above mentioned problem I realized the battery does not charge)

  Interpreted Power Reset

  RAM (Memmory modules) -replaced New One (4 GB)

  It is based on the sequence of flashing of LED Memmory module errors. Reseating the modules memmory (2 GB + 2 GB) doesn't seem to work so I replaced it with a new (4 GB).

  I hope that this has nothing to do with the battery. This does not solve the problem.

  Appreciated if someone could help. Thanks in advance

  Hello

  Unfortunately the "blink" codes are not always an accurate indication of the actual error, so this may be one hardware failure of another component on the motherboard.

  Try the following.

  Shut down the laptop, unplug the AC adapter and remove the battery.  Follow the procedure begins on Page 52 of your Interview Guide & Service to remove the battery from the RTC.

  Press and hold power for 30 seconds and then leave the laptop for 15 minutes.

  Exchange your module memory 4 GB in the other available slot.  Reinsert the RTC battery, replace the cover, plug the power adapter ( Let the main battery at the moment ) and try to start the laptop.

  Any change?

  Kind regards

  DP - K