KB2686509 repeatedly fails with ErrorCode 0x8007F0F4

Similar Questions

• KB2686509 cannot install with error 0x8007F0F4

  I tried to update the KB2686509 but fails with ErrorCode 0x8007F0F4

  Follow this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c>

  And stick to Susan Bradley

  UTC/GMT is 23:11 Thursday 10 may 2012

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  Run the automatic fix here and try again once the update manually by downloading it from HERE

• Update KB2183461 repeatedly fails with error 0x800736b3 on Windows 7 x 64. __

  This update has been now fails on my machine for at least a month:

  Cumulative Security Update for Internet Explorer 8 for Windows 7 for x 64-based systems (KB2183461).

  The error code is 0x800736b3.  Details below...  Does anyone know a solution to this problem?

  Log name: System
  Source: Microsoft-Windows-WindowsUpdateClient
  Date: 2010-08-23 08:44:46
  Event ID: 20
  Task category: Windows Update Agent
  Level: error
  Key words: Failure, Installation
  User: SYSTEM
  Computer: HKS - PC
  Description:
  Installation failure: Windows failed to install the following update with error 0x800736b3: Cumulative security update for Internet Explorer 8 for Windows 7 for x 64-based systems (KB2183461).
  The event XML:
  
   
     
      20
      0
      2
      1
      13
      0 x 8000000000000028
     
      82924
     
     
      System
      HKS - PC
     
   
   
      0x800736b3
      Cumulative Security Update for Internet Explorer 8 for Windows 7 for x 64-based systems (KB2183461)
      {34BD5FB0-047D-4786-B0F1-C4393CC67875}
      103
   
  

  Thank you!

  HKS

  SOLVED!

  Install this hotfix from Microsoft who fixed the instances on the failure of the automatic Windows Update on updates...

  http://support.Microsoft.com/kb/947821

• KB2310138 repeatedly fails with the error code 8004FF80

  Windows Vista 32-bit system:

  Windows repeatedly update fails when trying to install the KB2310138 updates.  Each failure is accompanied by an error code 8004FF80.  The problem is ongoing for more than 30 days.  Microsoft Security Essentials is obviously having a problem, even if the icon is green and the program reports that it is up-to-date.  All solutions?

  See if this FAQ makes things clearer for you-online http://answers.microsoft.com/thread/74e507b8-f6da-4eca-8ce7-d1aca7d3f1ba

  In these forums, you will find some support for Microsoft Security Essentials (MSE): http://answers.microsoft.com/en-us/protect/forum/mse

• KB948465 repeatedly fails with error code 0 x 80070490

  I got several error code 0 x 80070490 while trying to upgrade 32 bit Vista Service Pack 1 to Service Pack 2. Can anyone help?

  See: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/vista-error-code-0x80070490-cant-install-updates/e3dc2e16-1872-40ad-968e-45b209dffaee

• KB26865509 will not be installed, offered guard but fails with the 0xf0f4 error

  KB26865509 security update will not install on my system!

  KB26865509 is not a valid update or KB number.

  Assuming you meant KB2686509, you are not alone!

  See the RESPONSE of two 2 messages in this related thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

• KB2686509 install failed - no error code

  I was having repeated KB2686509 update installation failures. I have no error code after each attempt, just a message saying that it cannot be installed. What am I supposed to do?

  See this related, ongoing discussion-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

• kb2686509 updated Microsoft fails with the error code Ox8007FOF4

  original title: microsoft updates fails with the error code Ox8007FOF4

  My automatic microsoft update fails, I tried the manul update that also fails, I get an answer of (kb2686509) and an Ox8007FOF4 error code is their someone out there with an awnser

  http://support.Microsoft.com/kb/958051

• Replication fails with the-501 error

  Hi all

  My replica jobs suddenly all fail with error - 501 (I can't find any info one that means), but that's what shows the log to replicate:

  Replicate version1.3.0 generation R2

  From backup

  Folder lock target: /...

  File recovery is «...»

  P2P connection to the nas-xy-xy (distance RN102)

  X cannot connect to the nas-34-xx-yy (local RN104)

  X the connection - 501 error code

  X please verify the network connection between the devices

  This worked very well for months since the last update 6.5.1 I'm not aware of any changes that I made in each of the configurations.

  Both RN do not appear in ReadyCloud, Replicate sees the two RN in the network tab but when starting a job to replicate my local RN on the RN remote I get the above fault message.

  I am very reluctant to upgrade to 6.5.2 that it worked very well on 6.5.1 for so long and I did not really pleasant experiences for the latest updates...

  Someone at - it similar experiences (I'm inclined to think that the issue is on the server to replicate as it happened before that jobs has failed for a period, but succeeded after a few days without any changes on my side.

  Any suggestion that means this error - 501 (and how to fix it)?

  And if all fails, I'm getting a little tired of the repeated questions, someone at - it an installation of certificates SSH on the RN to activate RSYNC over SSH?

  Any comment is very appreciated!

  Yes, just tried it and got that job, turns out that apart from the source and target parameters that needs to be identical to the old job, also the name of the work is essential, it must be exactly the same as the lost job. (on the target files side are stored in a folder named after the name of the task, found that rather confused, but either way, once you are aware of it...)

  Don't have that and I got my old RESUME jobs where they left, it looks like I'm back in business.

  Thanks for your support!

• HPDM deployment fails with the error code: 14031022

  Hello everyone,

  I ve a strange problem with a new repository of child I ve created two weeks ago. Following situation:

  We have a master and (until now) repository repository a child for two locations. Capture and deployment on each side works fine. Now we're getting a third place, so we need another hpdm gateway and a child repitory to this place.

  I've added and configured as one worked and insert the IP address of the gateway again to a thin client to the new location. When I deploy an image on this client, I get the following error in the console of hpdm:

  2014-12-16 11:02:09 Assign repository: repository child name repository
  2014-12-16 11:02:13 synchronized correctly Completed.
  2014-12-16 11:02:14 task sent to the device management gateway
  2014-12-16 11:02:17 task has been retrieved from the agent.
  2014-12-16 11:02:58 deploy the image ready using the repository: repository child name guard.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed.
  2014-12-16 11:02:58 running common-task failed.
  2014-12-16 11:02:58 Errorcode: 14031022, error details: download the file (s) failed

  Agent of Thin Client Gateway: 4.5.3660.18502

  HPDM bridge officer: 4.5.3660.19.503

  agent update task works.

  I ve configured the shared folder and FTP access. Both are available from thin client. Configuration of the repository the two test passed successfully.

  Repository of child synchronize all the data from the master repository with success.

  Usually, I use FTP in IIS services, but filezilla I ve installed (disabled FTP IIS) for the best connection.

  Connects to the deployment task:

  000027) 16.12.2014 11:02:27 - (not connected) (10.32.2.52) > connected on port 21, sending the welcome message...

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > USER test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > 331 password required for the test

  16.12.2014 (000027) 11:02:27 - (not connected) (XX. XX. X.XX) > PASS *.

  16.12.2014 (000027) 11:02:27 - test (XX. XX. X.XX) 230 > connected

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > FEAT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > QUIT

  16.12.2014 (000027) 11:02:28 - test (XX. XX. Goodbye > 221 X.XX)

  16.12.2014 (000027) 11:02:28 - test (XX. XX. X.XX) > disconnected.

  Next, I get the above error HPDM. The server log HPDM said next.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  2014-12-16 11:11:35 [line 2] WARN Util - revertNumericString fail: k.A.

  Mhh not a lot of information.

  I Don t really get what could be the problem. You have an idea? Do you need more information (newspapers, error message TE) for assistance?

  Concerning

  Martin

  After the coup of controller.conf and the screen of the dialog editor repository that you set, your master repository was not configured this way:

  ReposPath has the value "C:\Inetpub\Ftproot\HPDM" in controller.conf (assume C:\Inetpub\Ftproot is the root directory of the FTP server)

  In the Master repository Editor dialog box:

  Implement FTP path to ftp: / //HPDM - he WS ftp: / /<>/. your screenshot.

  This is the reason that all of your linked FTP task failed with the same error code.

• Repeated failed installs Ko 977074, 978506, 978506. O/s of hanging in the journal began or pass the user's request.

  OK, here's my story:

  Windows 7 Home Premium, solid running, since 13/10/09
  History of failure of 974431 update that the next day, he managed without my taken part troubleshooting.  No complaints since more about 1 week ago got a BSoD outside no where while my child is on a restricted user account using IE.  Has not returned since, but suffice it to say.
  So now it's 26/01/10 and an update to install Windows Defender K915597 with success.  Cool deal.  It end tonight here and he says it is to install the updates and then stops.  Next day:
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  1/27 - office Live add-in 1.4 successful
  1/27 - KB976972 failed
  1/27 - driver update successful
  1/27 - KB977074 failed
  1/27 - KB976972 failed
  1/27 - KB978506 failed
  1/27 - KB977074 failed
  See a pattern here?  So I should also mention that all of a sudden if I click log off or switch users while one of these updates says waiting and not pass/fail it hangs on Please wait... I waited about 10 minutes (normally it's about 10 seconds for the newspaper and immediate to change user) then have to restart the computer or force the feeding cycle.  So I decided to uncheck the Group of updates and just try one at a time through the automatic updates.

  Wait what he...

  1/28 - KB976972 successful

  1/28 - KB978506 successful

  1/28 - KB977074 successful

  1/28 - KB915597 successful (Windows Defender again)

  Hooray! life is good again!

  It end tonight here and he said please wait... Configuration of windows or something like this.  Odd.  Given that all of the updates succeeded and I had no updates available message.  Well it stops down.

  On the morning.  Please wait while windows configures (or other) updates failed returning changes.  What updates?  They managed you cursed!

  29/1 - KB976972 failed (what  Wait.  What?)

  1/29 - KB978506 failed (what  Wait.  What?)

  1/29 - KB977074 failed (what  Wait.  What
  ?)
  1/30 - KB976972 failed
  1/30 - KB978506 failed
  1/30 - KB977074 failed
  1/30 - KB978506 failed (me trying just the update to the compatibility mode)
  1/31 - KB977074 failed (my download and try to install the update manually)
  So there is some sort of timeline for what it's worth.  So basically three updates repeatedly failing and play with my head.   Here are the error codes for each of them:
  Update for Internet explore 8 Compatibility View List for Windows 7 (KB978506)

  Installation status: failed

  Error details: Code 80004004

  Update for Windows 7 (KB977074)

  Installation status: failed

  Error details: Code 80004004
  Update for Windows 7 (KB976972)

  Installation status: failed

  Error details: Code 80004004

  More potentially useful data.  I have manually install a (977074), said she is successful and I want to reboot, Yes, please wait windows configuration, stops, comes up, please wait configuration updates, no error, log, look at the history of the update, says "pending" 977074 next, I reboot on mine, please wait windows configuration, stop , rises, please wait for configuration updates, UPDATES COULD not return changes, allows me to connect... She does it every time.

  So I think I'll just deselect all and hide updates, screw it right?  I don't really have the situations these difficulty going home anyway.  So all deselected.  No found update, green check in Windows doesn't update.  Everything is cool.  Stop this night here, please wait windows configuration, stops, appears, wait for updated configuration to update, UPDATES FAIL back.

  And yet, he is suspended when the logoff or switch user thing.

  Seriously.  What is going on?

  Hello
   
  First, install the system tool using the link provided: http://support.microsoft.com/default.aspx/kb/947821
   
  Then, run boot.
   
  To help troubleshoot error messages and other issues, you can try to troubleshoot this issue with a clean boot to see if we can identify a program or driver causing the problem you are experiencing.
  A clean boot to start Windows with some programs and drivers off or on selection. By doing this through trials and errors we can hopefully identify a specific cause of this problem. Here's how to solve problems with a clean boot:

  Clean clean boot.

  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved, make sure what third-party program is at the origin of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135
   
  Reset the computer to start as usual.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
   
  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. on the general tab, click the Normal startup option, and then click OK.
  3. When you are prompted to restart the computer, click on restart.
   
  If you are still experiencing a problem, try the following:
   
  I suggest to download the update manually and install it. Use the link below to download the update.
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=6711bec7-130F-4244-A13C-675bd9e42298&displaylang=en
   
  If this does not resolve the issue, I suggest you to reset windows update by following the steps listed in the article below:
   
  How to reset the Windows Update components?
   
  http://support.Microsoft.com/kb/971058
   
  You can also use the "Fix it" described in the article above solution.
   
  For more information on August 2009 Windows Vista and Windows Server 2008 Application Compatibility Update, follow this link:
   
  http://support.Microsoft.com/default.aspx/KB/972036

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• How can I fix KB2686509 repeated update of chess

  KB2686509.log]
  3.110: ================================================================================
  3.110: 23:49:48.421 12/10/2012 (local)
  3.110: c:\a7d9342dbcaddc87483e826506e26dac\update\update.exe (version 6.3.13.0)
  3.156: DoInstallation: GetProcAddress (InitializeCustomizationDLL) returned: 0x7f
  3.156: hotfix started with following command line:
  3.156: in function GetReleaseSet, line 1211, RegOpenKeyEx failed with error 0x2
  3.156: in function GetReleaseSet, line 1240, RegOpenKeyEx failed with error 0x2
  3,188: CreateUserInterface: GetProcAddress for DefineInstallCustomUI failed: 0x7f
  3.531: return value of IsMachineSafe = 0
  3.531: IsMachineSafe return 506628
  3.531: condition in Prereq.IsMachineSafe.Section failed with the fist
  3.531: Check condition for 1 line of prerequisite returned FALSE
  3.547: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3.547: KB2686509 Setup has encountered an error: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  3.594: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
  3.594: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  14,500: message displayed to the user: Setup cannot continue because one or more prerequisites required for the installation of KB2686509 failed. For more details, check the c:\windows\KB2686509.log log file
  14.500: user input: OK
  14.500: Update.exe extended error code = 0xf0f4
  14.500: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

  Hi LC253,

  Thank you for writing to Microsoft Communities. The problem description, I understand that you are not able to install the update (KB2686509). Before you start the troubleshooting steps, I need the required information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state from the link to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You can also see this article for more information.

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of Windows.

  If please follow the methods and let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Vista updates repeatedly fails to install (error 800b0100 code and 80073712)

  original title: Vista updates repeatedly fails to install

  I get 80073712 and 800 b 0100 error codes when you try to update for Windows Vista (KB968389),

  Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 86, and update for Windows Vista (KB975467) ISecurity. I tried the patch but no luck.  How can I download these updates?

  Download and run the system update tool.

  (http://support.microsoft.com/kb/947821/)

  Try to install updates again.

  Note After you run the tool, the Checksur.log file is located in the following location:

  %SystemRoot%\Logs\CBS\

  In a default installation of Windows Vista, this file is located in the following folder:

  C:\Windows\Logs\CBS

  A general solution, *IF* is no malware problem, would be to run the system update tool.

  (When was the last time you checked your system for malicious programs?)

  In addition to using an anti-virus, as Malware/spyware scan:

  http://www.Malwarebytes.org/products/malwarebytes_free>

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  In addition, scan with the free Version of

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update error 80073712 error code.

  08/15 / 1104:45: 22 am UTC