keep more and more 2538242 installation

Similar Questions

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  I got a new macbook pro and I want to spend my Adobe Creative Suite: Production Premium programs on it. I have no more the installation disc. I have my product code and the serial number for the facilities so. How can I do?

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• Again - the EULA allows to keep Windows XP after the installation and activation of a retail upgrade to Windows 7

  The EULA allows to keep Windows XP after installation and activation of a retail upgrade to Windows 7?
  I understand that the EULA (EULA) prohibits the USE of the operating system upgraded - must also be removed from the system?

  I intend to upgrade a pre-installed Windows Media Center 2006 on a Gateway computer to a level of detail to Windows 7 Pro 64 - bit.  I am adding a new hard drive, as this case nears end of life... and plan to install the operating system upgraded to the new HD - because I have XP 32 bit to Win7-64 bit... and a "custom" installation is necessary, anyway.

  This will result in an operating system XP on the old hard drive and the new OS Win7 Pro 64 - bit on the new drive.  There have been suggestions that the answer to this question is simply to remove the "old" operating system, after activating the 'new' Windows 7.  However - I see that any installation (or REINSTALLATION) of the operating system upgraded to Win 7 requires the previous XP to be "present on the computer.

  QUESTION: as long as I don't 'USE' the BONE replaced/implemented to date, I am in compliance with the EULA?  Alternatively, do I install "over" this Windows Media Player OS - on the old, due to lack of hard drive?

  The Media Center EULA States: «...» "15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After you upgrade, you can no longer use the software upgrade of. ... ', but is silent (as far as I can find by reading the EULA on the question of if software upgrade HAVE to be 'destroyed'.)

  (See: http://download.microsoft.com/Documents/UseTerms/Windows%207_Professional_English_7bb89e9f-20ea-4555-892f-394539ec1090.pdf "")

  Thanks for your review (a reference to the appropriate Microsoft documentation would be nice too)
  John

  You said above, «...» "You will be able to upgrade to Windows XP, it is a qualification license... »

  And I assume you are talking about my software Windows XP Media Center Edition (currently installed), as being a "qualification licence".

  That is right.

  Are we in agreement that a copy preinstalled OEM of Windows XP Media Center Edition IS extendable with a 'detail' update the license for Windows 7?

  His qualification, but you can't make a real room upgrade, you can do a custom installation. See the previous post on how to migrate from Windows XP to Windows 7. An upgrade maintains the personal files, settings and installed applications.

  I understand the ban on using the OEM OS software OR the upgrade replacement software on one computer other than the one on which it was originally installed by the OEM.

  I also understand that I cannot use the "improved" XP Media Center software, once the upgrade of Windows 7 has occurred.

  The rest to determine if it NEEDS to be deleted or replaced... you have no guidance on this issue?

  Well, when you perform a custom installation, in essence, it is deleted or replaced. Then, it is part of the upgrade license. It's like it becomes a mind is more tangible, but always there as a base to which the upgrade license may exist on your system.
  ------------------------------------------------------------------------------------------------
  On the original thread, Stuart W J replied 10 September 2012-
  "....

  "New - the EULA allows you keep Windows XP after the installation and activation of a retail upgrade to Windows 7?

  "..... No it does not preserve / using XP after the upgrade... »
  -----------------------------------------------------------------------------------------------
  Although I can't find the ban against the "continued" it any where in the EULA.

  Thanks again,
  John

• Booted XP went into the mode options regurly of open windows, or knowledge last configuration or safe mode. No matter what I choose, keeps restart and return to this page

  Original title: frozen configuration page

  My laptop running windows xp pro was fine, when I went to bed last night, but this morning I woke and went to use the lt and it started as usual but then in a mode options regurly windows open or to last working configuration, or 3 safe mode options. And no matter what I choose, it keeps restart and return to this page and has continually repeated the same steps over and over again... someone can please help me with this?

  It seems that your XP hangs for some reason any...

  Why do we know almost nothing about your system (except a laptop with XP Pro)?  I know this isn't your fault...

  Please answer these questions and to implement the following:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• HP Pavilion 15 laptop: product number of pc pavilion notebook 15 JOB41EA #ABU keep dimming and brightening.

  My laptop keep dimming and it brighten the screen of the day I bought it if its on battery or charger. He didn't have any video card installed with the exception of one intel inside. Tell me if it is problem software or hardware one? and tell me what to do...

  HI @ABDREH

  Welcome to the HP Forums!

  This is a wonderful place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your display continuously fades and brightens.  Does so you are running on battery or AC power.

  Did you run HP Support Assistantto help update the drivers?

  Have you tried to use the troubleshooter in Windows?

  Here are two links that can help.

  Troubleshooting display dim (Windows 8, Windows 7 and Windows Vista)

  Solving problems with the screens (Windows 8, Windows 7)

  If you connect an external monitor did the same thing?

  Alternatively, you can contact HP support for help that they can access your system remotely to determine and solve the difficulties.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• Satellite A100-225 keeps freezing and crashing with the new HARD drive

  Hi all

  I have a Satellite A100-225 with a 100 GB SATA Hitachi drive I int it that recently started showing bad sectors. Then I bought a Hitachi 320 GB SATA II drive to replace it. I tried the drive and it was recognized right away, so I didn't need to change the SATA speed. I ran the restore a disk installed newest. The problem I have is that the computer keeps freezing and crashing with the new drive. It takes a lot of time to load up when turned on and there is a noticeable to untermittant delay when you drag the cards around solo.

  I tried to run the Hitachi drive test and it comes back fine. I also tried to turn the SATA speed of the drive down from 300 to 150 via the firmware, and although I saw a slight improvement, it is still not right.

  I talked to Hitachi and they say that he could not be 100% compatible, so the problems. Someone at - it else sucessfully set up a replacement for this notebook drive and if so what make and model. Has anyone else had simular problems?

  Thank you

  Years ago, I've updated yet more former Satellite M70 with SATA HDD (270 GB if I m remembering well) and everything was fine.
  In my view upgrade with SATA HDD normal shouldn't be a problem. Do not SATA II because it will not work faster.

  I can't say for sure, but there must be a compatibility problem.

  Let's see if someone else had better luck with the upgrade of the disk on the Satellite A100.

  Have you checked this forum with advanced search option? Maybe you can find some old NET on upgrade the HDD on A100.

• IM playing final fantasy 8 on pc and using my xbox controller but in the game that the cursor just keeps scrolling and don't know what can not please help

  IM playing final fantasy 8 on pc and using my xbox controller but in the game that the cursor just keeps scrolling and don't know what can not please help

  Hello

  Xbox articles:

  http://forums.Xbox.com/xbox_forums/b/default.aspx

   

  For more information:

   

  Contact Xbox support:

  http://support.Xbox.com/en-us/

   

  Xbox LIVE Support:

  http://support.Xbox.com/en-us/Xbox-Live/browse?XR=shellnav

   

  Games for Windows LIVE errors:

  http://support.Xbox.com/en-us/Games/PC-games/games-for-Windows-errors-messages

   

  Management of the Windows Live ID:

  http://supportuat.Xbox.com/en-us/pages/Xbox-Live/how-to/Xbox-Live-account-management/manage-Live-ID.aspx

• trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  Hi Pashley,

  I see you get error 0xc00000e9. I'll help you with this problem.

  1. What is the model number of the computer?

  2. you talk to re - load Windows Vista on Toshiba computer?

  3. How are you trying to re - load Windows Vista?

  4. when exactly you get this error message?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  You can also post this question in the Toshiba Forums: http://forums.computers.toshiba-europe.com/forums/index.jspa

  Thank you.

• Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing.

  Hello

  Whenever I try to delete a file or display a folder, explorer.exe keeps freezing and crashing. I tried SFC/scannow, and he found that he could not repair the corrupted files. I also tried to use a boot disk to fix my OS, but he said he had "no problems found".
  Please answer as soon as POSSIBLE. Thank you.

  Use chkdsk /f and sfc/scannow and reboot several times.

  Sometimes it takes more pases.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Menu start keeps opening and closing and opening several times. Can you help me?

  My Start menu keeps opening and closing and prevents me from doing anything.  Do you know what I can do to fix this?  I don't am not technical at all so would like answers that are easy to implement, if possible.

  Thank you.

  This could be a problem of keyboard with the Windows key.  If it is a desktop computer, try another keyboard. When a laptop that will be more difficult to test. Looking for debris or rigidity.

• Screen Gmail keeps time and goes back to the sign in screen

  Original title *.

  Gmail and Windows 7

  My screen Gmail keeps time and goes back to the sign on screen. Very annoying. Help, please. Len

  Hi Leonard,.

  Please contact Microsoft Community.

  The problem may occur due to browser settings correct.

  To better help you, could you please confirm a number of things like:

  1. Are what happens with Gmail or with any what web based e-mail accounts?
  2. What browser he uses to access Gmail account? If this problem is specific to the Gmail account?

  Step 1: If you use Internet Explorer, I suggest you to check the number in mode - Add-ons. Start Internet Explorer in no Add-ons mode.

  While Add-ons can enhance your online experience, they can sometimes interfere or conflict with other software on your computer. Try to start Internet Explorer without Add-ons to see if the problem goes away.

  a. press the Windows key + R and then type iexplore - extoff without the quotes and press ENTER.

  If you are able to access Internet Explorer without any problem, then add-ons can cause the error.

  You try the steps to activate the modules individually determine which add-ons may be causing the problem.

  Step 2:

  (a) open Internet explorer on the desktop.

  (b) click on the Tools button, click on Manage Add-ons, and then click Enable or disable add-ons

  (c) in the list view, click Add-ons that have been used by Internet Explorer to display all add-ons.

  (d) click on the Add-ons that you want to activate, and then select activate.

  (e) repeat step 4 for each module that you want to activate.

  For reference, see the link for how to manage add-ons:

  Manage Add-ons in Internet Explorer

  http://Windows.Microsoft.com/en-us/Internet-Explorer/Manage-Add-ons#IE=IE-9

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Constraints/General to keep PROD and databases on the same Machine TEST

  Hello
  
  Version: 12.1.1
  Database is 11.1.0.7
  2 node architecture (DB on a single Machine, applications on the same Machine)
  
  Client wants to keep PROD and databases on the same Machine TEST. Could you please let me know the issues and constraints that we can encounter this configuration in the future. While I can force the client to a machine more TEST.
  
  Thanks in advance...

  Hello

  My Client told me that I can provide more resources (CPU, memory, and disk), then why can't keep us as what he asks?

  There are other technical problems, that we can meet?

  I think the above should be enough :)

  Other proceedings continued would be impossible (as you said, because of human error, and in case the server restart is required). Even if they provide more resources it would be a conflict over shared resources (for example, what happens if a process on the test instance consuming all CPU/memory resources?).

  So, in futuere, we can improve the database to the new version and some environment variables in the registry may have affected it?

  Each instance will have its own entries in the registry and this shouldn't be a problem.

  Thank you
  Hussein