Keep the host resource pools after leaving a cluster

Similar Questions

• Keep the laptop plugged in after that that it is fully charged

  I wanted to know if keep the laptop plugged even after that that it is fully charged is harmful to the battery or not.

  Thank you

  But I have a dell laptop and what to say http://www.dell.com/content/topics/global.aspx/batteries_sitelet/en/batteries_faq?c=us&l=en&cs=19#faq33 the dell faq site

• Move a guest to the different resource pool

  I have a box of ESXi 4.1 stand alone. Like a fool when it was created, I don't create pools of resources. Now that more added, I started using pools of resources. I tried to find info on the passage of the guests to a pool different and found that it could be issues (kb/1018360) but cannot find how to actually move a guest. Any ideas?

  You can only select and drag the virtual computer to the new resource pool

• Root user cannot create VMS within the Resource Pool after you rename the Cluster

  Currently, vCenter manages two clusters. I renamed a single cluster and the root user seems now are not allowed to create a new Virtual Machine in resource pools to the title of the group with the changed name. I tried to change the name of the cluster to its original name... no luck.

  The root user can still create a VM under the individual cluster nodes, but not in a resource pool.

  The cluster that has not been renamed yet can be managed completely with the root user. Resource pools it allow me to create a virtual machine.

  I found this last issue and checked on each cluster node that the ACEDataRoleId is-1 for each section: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031192

  I am at a loss, any help would be greatly appreciated! Thank you!

  I think it's a bug. When I created a new data center and migrate all nodes in cluster about him, the permissions problem I was experiencing did not follow.

  Thank you for your help.

• Question for the host resource

  Hello

  We have 1 blade that hosts a physical SQL Server on it. The resources of this blade are 10 total to 20 cores processors and 512 GB of RAM on it. We want to virtualize it soon, but we don't have any other guests that we could use this size. We have a few available hosts that are 8 to 16 cores CPU and 256 GB of RAM. I was hoping that I could create a cluster with 2 of these hosts and virtualize the largest physical machine in the cluster. I know that when I virtualize this machine, he will live on one of the hosts at any given time. My question is if these hosts would be 'pool' their resources so that this machine could use more than a single host would offer it. Is it possible at all or not? If not is there another work around for this problem I have?

  We are on vSphere 5.5

  Thank you

  My question is if these hosts would be 'pool' their resources so that this machine could use more than a single host would offer it. Is it possible at all or not? If not is there another work around for this problem I have?

  No, the maximum resource that can use a particular virtual machine will be limited by the maximum available on a single host computer running this VM particular resource. Workaround is to add more physical resources on the host or create the virtual computer with limited resources. Are you sure that your virtual machine uses really 20 the processor cores and 512 GB of RAM? Most of the workload running on the physical server uses all resources.

• Cluster with different host - resource pools hardware?

  Hello

  We have currently three generations of servers at base of AMD in our environment - with different CPU clock speeds.

  Guests are split into three groups and VMs are grouped based on clock speed.

  But frankly, it's a mess to administer.

  We envisage the creation of a single cluster and using pools of resources.

  But CPU resource pools take host speed of the CPU in return?

  - Or they just sure that VMs receive their share of CPU temps on loan-time partial?

  Best regards

  Martin

  Pools of resources sharing works only when there is some conflict of resources.

  -VMs in 'high' will appear on hosts with fast processors? - and get the most MHz?

  The actions are only priority... Then no.

  With a reservation... it depends on how much MHz offers...

  - Or they simply receive a high share of CPU time on a random host?

  By shars Yes...

  But remember the first sentence!

  If you have enough of free resources, all virtual machines are also (for actions).

  André

• Script to check the correct resource pools

  Hi guys

  Hoping someone can help with PowerCLI issue?

  I want to set up a script PowerCLI who together share CPU and memory allocated to all VMS in each Resource Pool, add them together and compare them with resource information in the list of resources and those who differ from a CSV output (including how on every property is different).

  The idea is that this script will quickly check through our vast domain for incorrectly configured in the resource pools (ie. those who have not been updated).

  Anyone able to help give advice on how I can get that data into PowerCLI from the pool of resources and the virtual computer?

  Thank you very much

  -

  ---

  a crazy penguin

  http://www.acrazypenguin.com

  I don't know if the values you provide are correct for what is planned.

  Especially the MaxCpuUsage won't say much because this will normally reflect the total amount of CPU resources on the host (provided that the customer has no defined limits).

  The following should give a better picture (I guess)

  $dcName = 
  $report = @()
  $dc = Get-View -ViewType Datacenter -Filter @{"Name"=$dcName}
  Get-View -ViewType ResourcePool -SearchRoot $dc.MoRef | where{$_.Name -ne "Resources"} | %{
       $rp = $_
       $rpMem = 0
       $rpCpu = 0
       Get-View -ViewType VirtualMachine -SearchRoot $rp.MoRef | %{
            $rpMem += $_.Summary.QuickStats.hostMemoryUsage
            $rpCpu += $_.Summary.QuickStats.overallCpuUsage
       }
       $report += New-Object PSObject -Property @{
            Name = $rp.Name
            "VmCpuTotal (MHz)" = $rpCpu
            "VmMemTotal (MB)" = $rpMem
            RpCpu = $rp.Runtime.Cpu.UnreservedForVm
            RpMem = $rp.Runtime.Memory.UnreservedForVm / 1MB
       }
  }
  $report | Export-Csv "C:\ResPool.csv" -NoTypeInformation -UseCulture
  

  Note that this does not overcommitment account. To have the script must use the unreservedForPool rather than the UnreservedForVm property property.

• Keep the network discovery settings after you restart the Server R2 Standard 2012

  Hi all

  I'm having the following problem. After you restart the server from the network discovery will go off. Therefore, I do not see the server, this can cause problems in the future, so I need to know how to keep on even after network discovery settings server restart.

  Thanks for the help!

  Hi, manual,.

  I suggest you post your query in the following forums to improve assistance in this regard.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Thank you.

• 10 workstation online best way to keep the host offline and guests?

  Newbie question: Workstation 10 - have a host Windows 7 Ultimate x 64, several guests Linux Mint 17.3 (KDE). The machine is portable i7 with 16 GB of RAM. The network is wireless only (cannot use cable in current situation).

  I would keep the Windows 7 host permanently out of the network. The guests are online and used for web and similar access. What would be the best way to set up on the side of the network, assuming that it can be done?

  Thanks a lot for your help!

  PH

  Hello

  Well this is... depends on what you intend to 'offline' for the customer.

  If you are planning that the guests to be accessible from the outside (I mean through wifi to your host), the host has (?) to be somehow connected, so online?

  There is perhaps a way to restrict connections from hosts on the outside... so that web page in emails do not work, but the host is will still be able to receive a part of traffic in my humble OPINION.

  With my knowledge and my experience, I know:

  -You can connect a guest with his * own * USB hardware. I mean you can disconnect from host a WiFi USB (or USB ethernet adapt) card and connect it to a given host. So the host could be offline (no wifi, no ethernet), but the guest can be connected through the material, it will set up.

  -guests could communicate with each other via a 'host-only' adapter or a bridge (as your ethernet NiC).

  -When the ethernet NiC host is physically connected (and guests on her bridge), communication between clients is broken... but a software solution is to add a dummy loopback adapter to simulates network card is connected. In this used during travels by train, without ethernet or wifi, to avoid changing the working configuration of the guests in bridge on the ethernet adapter that I used to have to work! :-) Modifying simply physical WMnet0 (eg) to ethernet virtual network configuration microsoft Loopback to tour.

  Took the 3 above stated and your configuration:

  -1 host must be offline

  -several guests that should be online

  -ethernet to the home not connected

  You can try to:

  -installation of a map of looping to the host (http://www.groovypost.com/howto/microsoft/install-a-loopback-adapter-in-windows-7/ )

  -connect and configure a physical map of wifi USB to one of your comments (comments should have a virtual USB controller installed).

  -share your comments above WiFi connection.

  -Configure the * other * invited to use the above share under their gateway address (and DNS I guess?) and set up their virtual connection through the loop (you may need to manually change the address/subnet of the closure to match that of the shared connection).

  It's an idea to dig.

  Own a unique login prompt works for sure, but use it as a gateway to the other guests might be the tricky part (at least for me)!

  My 2 cents! ;-)

  Kind regards.

• Where information on permissions, folders, and the stored resource pools?

  Hello world

  Lets guess a virtual Center 2.5 with some ESX 3.5, resource pools, clusters of somes, folders with permissions for some users

  I would like to know where is the information about files, resource pools, permissions and other stored data. In the registry in VC in .ini files?

  The fact is that we are going to migrate to a new Virtual Center but we want to preserve the information on the Organization to avoid retyping all the data again.

  Thanks in advance

  Hello Luis_F,

  Files, Resource Pools, etc. are stored in the database to the virtual Center. Here is a link to a diagram of the U2 virtual Center 2.0.2 schema. There are of course changes in 2.5, but the diagram can help out you.

  Diagram of U2 virtual Center 2.0.2

  Don't forget to use the buttons on the side to award points if you found it useful (you'll also points).

  Kind regards

  Harley stagnate

• Can we keep the laptop plugged even after the battery is fully charged?

  When my battery is fully charged, is it acceptable to continue using the charging or is it better to unplug? My friends have different opinions on this topic and one of them said to me that if I continue to load while it is fully charged, it quality will be reduced or something. Is this really possible?

  Hello

  The best information comes from the machine system.

  Batteries and loads in portable computers today are designed to stay in the computer
  available to use and reload. The system more now have an automatic release of configuration which
  will drain the battery a bit then are. That helps keep the battery refreshed
  If the battery has more power and lasts longer.

  Check these:

  Battery: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/battery-meter-frequently-asked-questions

  Tips to save battery
  http://Windows.Microsoft.com/en-us/Windows-8/tips-save-battery-power

  Power plans: frequently asked questions<- be="" sure="" you="" are="" using="" power="" saver="">
  longer battery life.
  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  =====================================

  I use the free version of BatteryBar to monitor my battery.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• VAMI will not keep the host name...

  I have Ubuntu 10.04 Studio Appliance and.  When you open the Web interface and set the host name, it takes her.  Log out and back in and it is clearly expressed.  Restart the server and the host name is localhost.localdom.

  See the attachment for the screenshots

  I found a work-around as it seems that the vShield data security apparatus has the same problem.  Article KB 2009519

  If you have made your changes, you can delete

  / opt/VMware/etc/VAMI/Flags/vami_sethost {name, network}

  If you want to disable this in your profile to build you can also set the following properties to false:

  fake

  fake

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• Keep the edited video even after expiry of the trial FCPX?

  I'm in my trial period of FCPX.  Once I finish my video editing, can I download it from a site created by Google for viewing (even after the end of my trial period) on a computer (Mac or PC) that is not supported by FCPX?

  TYou would have been export from FCP before the end of the trial period. The file can be used on any machine that supports.

• How to keep the host ID to change

  Whenever I restart my computer, it creates a new host ID.

  Hello Claudio,

  1 have you ever done any recent hardware or exchange of software on your computer before this problem?

  2. What is the number of local host that is present on your computer?

  127.0.0.1 is the default host ID.  Provide us with more information on the issue.

  Please follow the links:

  Set up HOSTS file:

  http://TechNet.Microsoft.com/en-us/library/cc751132.aspx

  Also, visit the link mentioned to let us know the exact cause, to find the solution as soon as possible:

  Suggestions for a question on the help forums:

  http://support.Microsoft.com/kb/555375

  I hope this helps.