Keep the selected highlighter

Similar Questions

• Keep the selected index of a HorizontalList

  I have a horizontalList which is filled with a data provider. My page never refreshes after an interval of 30, 60 seconds.

  I have 5 item in the list. So when I select an item in the list at index 3, his article is highlighted with a different color. Now, when the page is refreshed in 30 seconds, I lose the highlight. How do I keep on refresh highlight color so that I know how I look at one.

  I throw every time an event that refreshes the page and I store the index selected on my model. But I could not set the property of the element selected highlighted or selected.

  Here is the code I put in place.

  private void handleAppRefreshed(event:Event): void {}

  trace ("Index:" + model.selectedHLIndex);

  hlist.selectedIndex = model.selectedHLIndex; where hlist is the horizontalList

  }

  Any help will be appreciated. Thank you.

  KM

  Thank you. Once you refresh the data, you will lose the selectedItem. You can store the value and reset it after that data is returned.

• Change the selection highlight color

  The default color when a cell or item is selected is a light cyan. On my computer, it is very difficult to discern the text because cyan light highlight color and white text are scrambling. How can I adjust the highlighting/selection color so that the text is readable?

  In fact, the color of the selected item is determined by your operating system. For editing in Windows XP:

  Right-click on your desktop
  Properties
  Appearance tab
  Advanced
  Point of fall down: has chosen "selected items".
  Change the color to what you want

• How can I control the selection highlighting colors attributed to layers?

  When new layers are created in the layers panel, they are on a default selection highlighting colors. The color for each new layer changes, sequencing with a list of color options. For my personal use, if there is lighting in my office and work, I work with, I find about 75% of the color options to be unusable. In fact, the only definition of color that always works for me is 'Green' (the third option from the top of the list). I work with many layers on each project and I find myself change each layer to Green by hand. Y at - it an option to set the default highlight color for each new layer of a single color rather than go through the list? I looked through all the options that I could find throughout Illustrator without seeing it.

  Create all your layers, select the first layer, hold down the SHIFT key, select the last layer, then double-click to edit all layers to one.

  

  

  Or create a template with your layers/names/colors you want and save on a format of model commandeer.

  

• How to keep the region selected when the page is sent

  Hello

  I created a page with several area equipped with a region selector.

  When the page is sent, the region selector returns to 'show all '.

  I would like to keep the selected region, but don't know how.

  Any ideas?

  APEX version: 4.2.6.00.03

  Theme: 26

  Best regards

  Klaus

  Hi Klaus,

  Please follow the Blog solution

  http://blog.theapexfreelancer.com/2011/11/sticky-region-display-selector/

  Hope this helps you,

  Kind regards

  Jitendra

• How to keep the video selected after you move the playback cursor

  I use Flash CS5.5

  After selecting a Clip, the properties panel displays its properties. When you move the cursor reading by dragging the mouse, the properties of this Clip are still visible in the properties panel. But as soon as I stop dragging and release the button of the mouse, the properties panel changes - it now shows the properties of the motion tween.

  Is there a method to keep the selected Clip after dragging the playhead and do not pass the selection to the motion tween? That's because after dragging the playback slider I still need the Clip properties, so I need to select again and again after dragging the playhead.

  You forget entirely on the query editor.

  Query Editor window->.

  When you slide on your scenario, this shows you all the key properties and their values as well as real keyframes. This is where you should be inspect and adjust the values.

  

  It took me a while to return to flash animation and when I started the conversion from the classic Tween system to the new system of motion tween I didn't know that this sign existed. He brings Flash a little closer to After Effects (my favorite animation tool). It's a lot better that the classic tweens, it's safe.

• refresh the html region when the selection list or selected ir line chang

  Apex 4.2

  Hello

  I made a simple page for test actions.

  I have

  -an interactive report and a selection in my first area list.

  -a field of text (P5000_indid) to keep the selected indid

  -region of html where the source is:

  DECLARE

  CURSOR c_ind IS

  SELECT indid, ind, industry

  IND

  WHEN indid as: P5000_INDID;

  BEGIN

  FOR a c_ind IN LOOP

  HTP.p ("< style b =" white-space: nowrap;) "> Indid: ' |" a.indid |' ---> ' || a.Industry: '< /b > < br / >');

  END LOOP;

  END;

  I'm sorry, but I m a bit confused with all the things I read before and do not know what is possible or not and what is the best practice to:

  1. select in the selectList (is it also possible to retrieve the selected (highlighted) or line in the IR)

  2 update the P5000_INDID

  3. refresh the html box according to the value of P5000_INDID (I was able to refresh an IR according to value, but there was the possibility to say what variable to present, but I have no

  see for the region of html)

  I m doing this test, because in the end, I would like to be able to regresh a small chart according to the selected line of the IR.  Do you think that it is possible to s?

  Sorry for my newbie question

  Thanks for your help

  L.

  OK, I finally found everything that I needed,

  You can test it on:

  http://Apex.Oracle.com/pls/Apex/f?p=53793

  Demo/demo

  the content of the output area now is the result of an application process, according to a parameter.

  It is called with javascript onChange and response replace the contents of the region

  and you can also see that I can now select a line and show it by changing the color of the line, and then update the output.

  and when a line is selected, it resets the selection on the selectList to avoid triggering the event on the selection list.

• How to manage the selection with the box in a table

  Hello

  
  

  JDev 11.1.2.4

  I have a table with an attribute of EO/VO, transitional to manage the selection. This attribute is displayed as a check box. The user makes a selection by clicking on the checkbox. Then, the user clicks on a button that displays a pop-up window. Inside of this pop-up window, that user can create, insert, delete, or update values in a table based on an other EO/VO.

  When the user clicks OK, the pop-up window is closed, then the data is committed.

  When the user clicks Cancel, the popup is closed and the changed data are ignored. To remove the data, I call a Rollback. It works fine, but all the transitory values are lost which is correct because of the discount after the cancellation.

  It's a problem because the user must be able to open the pop-up window several times with the same selection. This means that the restoration is not appropriate in this case.

  How to ignore data edited inside the pop-up window and keep the selection?

  Thank you

  You can try to put the popup in his own taskflow and define a backup point before entering the taskflow. When the user cancel the editing restore you to previous backup. This should dispel the changes.

  Or you save the selected rowkeys, call rollback and backward selection later.

  Timo

• Errors with the selection event

  Hello everyone!

  I have two problems in an application I'm developing, I would like your help.

  My first problem:

  I have a table, this table each row includes a checkbox. When I click this checkbox to perform an operation, the "Event Selection" event fires. This line has a "Event Selection" event so that when you click on it, this event is fired, but when I click on the checkbox, this event would not be triggered. Someone knows how to help me solve this problem?

  My second problem:

  Button to run the query as the table to be filled with lines. However, when this query returns only one row, I can't raise the event line "Event Selection". When the query returns two lines or more, may perform the procedure normally could someone help me on this problem?

  I appreciate everyone's attention.

  Hello

  "Event Selection" so that when you click on it, this event is fired, but when I click on the checkbox, this event would not be triggered. Someone knows how to help me solve this problem?

  By selecting the check box check must also select the row (you should see the selected highlighted line). Your message does not have a version of JDeveloper, so I blindly suggest to check what you see with a newer version.

  Button to run the query as the table to be filled with lines. However, when this query returns only one row, I can't raise the event line "Event Selection". When the query returns two lines or more, may perform the procedure normally could someone help me on this problem?

  
  

  Well, the listener of selection is more of a selection to change listener and with one line, there is no change in the selection and the single line is automatically selected. So the question is what the code is that the selection listener must invoke.  One option is to call getEstimatedRowCount on the iterator and if there is only one line, run the logic otherwise performed by the select listener

• How to keep the value in Graf

  Hi all

  I use following code to set the default value for messageChoiceBean.And its fine.but of work in this case, is that

  This page is Iproc page and he saw the train. I mean when the user click on button nxt it goes for nxt step.when I click on nxt button.and return to the previous page, then that once again the default.

  In {Graf}

  OAMessageChoiceBean createMBean = (OAMessageChoiceBean) webBean.findChildRecursive ("Taxable");

  if(createMBean!=null)

  {

  createMBean.setText (pageContext, "SYSTEM");

  }

  }

  Here bydefault game messageChoice do not know... The SYSTEM is id of don't know.

  When I change don't know another value and click on nxt button.and I'm back to the same page with the "back" button, then again, it sets the value of not knowing...

  Here, I want to keep the selected value...

  Thank you...

  Hello..

  How can I use session values to maintain the value of the user's selection?

  and this is... I want to declare a variable that can be Graf and I put no value now, I want to use the same variable in PFR() and I want its value to be YES... How can I achieve this?

• Formatting of the Spry Menu to keep the current page has highlighted?

  Hello

  I have the manual missing O'Reilly for CS5, but I can't find instructions on how to keep the highlighted menu bar so that the user always sees the specific page they are on the menu. If someone chooses the "About" page, I would that the text/tab About stay highlighted (in the style of hover), so that the user always knows the page they are on (without adding a breadcrumb or separate page header).

  Can someone tell me the instructions. Is there a selector under specific within the spry css or separate it HTML I need to add to the html page or the menu js spry?

  Thank you

  Wendy

  Just follow the instructions here http://labs.adobe.com/technologies/spry/articles/updater_help/

  If you want a fast solution

  1. make a new (empty) file in the SpryAssets SpryDOMUtils.js file
  2. Click here http://labs.adobe.com/technologies/spry/includes/SpryDOMUtils.js
  3. copy the code that you see in step 2 (on the page, right click and select all of the pop-up)
  4. Open your newly created SpryDOMUtils.js file and paste the content in here (right click and choose Paste)

  And you have a copy of work. Don't forget to download the file on the remote server, otherwise your online version does not work.

  Happy vaporizing.

  Ben

  PS NEVER GIVE UP! There is always a solution.

• How do I set the background / highlight on the listView when select multi use

  Hi, I'm used to select multi on the list view, the problem is when the selected item does not change the background (I think by default will change in light blue)

  Maybe because I'm not using StandardListItem on itemList, I use clean container for itemList.

  How to set the color to the element highlighted on multi select listView?

  Thank you

  I use the background property on my customized itemList:

  {Of container

  ID: listItemContainer

  background: listItemContainer.ListItem.selected? Color.Create("#18AFE2"): Color.create("#018AFE2")

  ...

  }

• How to highlight the selected line in an interactive report in apex5?

  Hello

  I want to emphasize the selected line in the report by changing the background color of the line. Basically, I want to do this. I really want to do is, select a row in the report and according to the selected line, I want to retrieve other data to another interactive report on the same page. So, how can I do this?

  Hi geslin,.

  Garza says:

  But here shows a link to another page or something like that. But I don't need that. I just want to show when the user selects a specific row by clicking on this line, and it should show that it has been selected by changing the color of the line and after having extracted a few hidden field and according to those column data display data on another report on the same page.

  Check your Application-> Page 2 30870. I've set up a dynamic action to reach the line highlighted when selected.

  Here are the steps to achieve the highlighted line:

  • Changed the definition of class employee culminating point to CSS-> section of the line on the page:

  .highlight-employee
     {
      background-color: blue !important;
      color: white !important;
     }
  

  • Commented the code written in JavaScript-> Execute JS when the section of the page to load the page.
  • Edited the ROWID of your interactive report column and set the following properties for 'column link:

  Text link: #ROWID #.

  Link attributes: id = "" #ROWID # "class ="monlien""

  Target: URL

  URL: javascript:void (0);

  • Dynamic action created with the following properties:

  Name: highlight_selected_row

  Event: click on

  Selection type: jQuery Selector

  jQuery Selector: a.mylink

  Action: Run the JavaScript Code

  Fire on loading the Page: No.

  Code:

  var row_id = this.triggeringElement.id;
  $('#P2_NEW').val(row_id);
  $('#'+row_id).parent().closest('tr').find('td').addClass('highlight-employee');
  

  Scope of the event: Dynamics

  Kind regards

  Kiran

• How to select text and be able to change the font without the text highlight color effect reverse?

  I remember being able to select the text with a certain shortcut would not show that it is actually highlighted, but it actually so, essentially the same function as selecting / highlighting just without the Visual indicator that it is highlighted / selected.

  You can change the font by selecting just different fonts in the menu drop-down of the character Panel. It will change the police without selecting text and giving you a reverse color effect.

  

• Select only the layers highlighted?

  Is it possible to get to the level of the layers only highlight?

  For example, I want to get an object/array that contains only the layers highlighted in blue:

  

  I'd rather not select the work to achieve this.

  Thank you!

  M

  This gives a shot.

  It will leave you with a table containing the layers you had selected in the layers panel when the script is run.

  You can see the bottom I loop this table so you can see each name and origin of visibility

  function get_selected_layers(){
      var doc = app.activeDocument;
      var lays = doc.layers;
      var OriginalLayers = [];
      for(var i = 0; i < lays.length; i++){
          OriginalLayers.push(lays[i].visible);
          if(!lays[i].visible){
              lays[i].visible = true;
          }
      }
  
      make_action();
  
      var SelectedLayers = [];
      for(var i = 0; i < lays.length; i++){
          if(lays[i].visible){
              SelectedLayers.push(lays[i]);
          }
      }
  
      for(var i = 0; i < lays.length; i++){
              lays[i].visible = OriginalLayers[i];
      }
  
      return SelectedLayers;
  
      function make_action(){
          // Set you action name and the set name that it belongs to here
          var myAction = "Select_Layers";
          var mySet = "Scripted_Actions";
          //---------------------------------------------------------------------------------
          var currentInteractionLevel = app.userInteractionLevel;
          app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
          var actionStr = [
              '/version 3',
              '/name [ 16',
              '53637269707465645f416374696f6e73',
              ']',
              '/isOpen 0',
              '/actionCount 1',
              '/action-1 {',
              '/name [ 13',
              '53656c6563745f4c6179657273',
              ']',
              '/keyIndex 0',
              '/colorIndex 0',
              '/isOpen 0',
              '/eventCount 1',
              '/event-1 {',
              '/useRulersIn1stQuadrant 0',
              '/internalName (ai_plugin_Layer)',
              '/localizedName [ 5',
              '4c61796572',
              ']',
              '/isOpen 0',
              '/isOn 1',
              '/hasDialog 0',
              '/parameterCount 3',
              '/parameter-1 {',
              '/key 1836411236',
              '/showInPalette -1',
              '/type (integer)',
              '/value 7',
              '}',
              '/parameter-2 {',
              '/key 1937008996',
              '/showInPalette -1',
              '/type (integer)',
              '/value 23',
              '}',
              '/parameter-3 {',
              '/key 1851878757',
              '/showInPalette -1',
              '/type (ustring)',
              '/value [ 11',
              '48696465204f7468657273',
              ']',
              '}',
              '}',
              '}'
          ].join('\n');
          createAction(actionStr);
          app.doScript(myAction, mySet, false);
          actionStr = null;
          app.unloadAction(mySet,"");
          app.userInteractionLevel = currentInteractionLevel;
      }
  
      function createAction (str) {
          var f = new File('~/ScriptAction.aia');
          f.open('w');
          f.write(str);
          f.close();
          app.loadAction(f);
          f.remove();
      }
  }
  
  var myLayers = get_selected_layers();
  for(var i = 0; i < myLayers.length; i++){
      alert(myLayers[i].name + ", " + myLayers[i].visible);
  }