Similar Questions

• Need new display driver for the Qosmio X 500

  Hello
  I have a Qosmio X 500 of 10W.
  I should update the display drivers to be able to play Bad Company 2, but the latest nvidia drivers available on the Toshiba site does not solve my problem, and I see no installation drivers uploaded by Nvidia Web site because it says that they are not compatible with my device...
  Qosmio series made for the players, so I hope that this problem will be solved as soon as POSSIBLE.

  Hello

  Qosmio x 500 most recent model of laptop, and I assume that Toshiba used the latest driver designed for mobile computing. Maybe new version will be published soon.
  Page NVIDIA drivers are not designed for laptops, and this is the reason why you do not install this version.

  Beware also the NVIDIA drivers. Yesterday, I found the article on bad Version 196.75 driver. The result is a graphics card overheating.

  Do you have problems with other games you play?

• What version of NOR-DMM is later?

  It shows on the search page for the NOR-DMM driver, NI - DMM 15.0 was released in August 2015.  15.1 received July 2015.  See the problem?  15.1 was apparently released prior to 15.0.

  Which is the most recent?

  Hi CurtisHx,

  Long story short, NOR-DMM 15.1 is the latest driver.  The reason for this is that it supports a few things 15.0 have such as:

  1. support to debug a NOR-DMM device in use by another application, supervision or control of the aircraft in the NOR-DMM Soft Front Panel.

  2-OR-DMM 15.1 and later supports the following real-time operating environments:

  a. Module time LabVIEW Real-time

  b. LabWindows/CVI real-time Module

  However, NEITHER-DMM 15.0 only adds support for LabVIEW 2015.

  In regards to release dates, it was more to do with the process of downloading on the web.  Sorry for the confusion!

• Speed of NOR-DMM

  I use a multimeter PXI-4065 with MS Visual c# .NET 4.0 and NOR-DMM. I have a test that requires some sort of closed feedback loop and I need to take readings of voltage with an interval of every 5 ms or better (software controlled) DC for a duration of 1 second. It must be controlled so that the application can set a second parameter to the suite, IE software. I can't use a multipoint measurement function. I have read all the documentation of NOR-DMM on the opening time, settling time, etc. and adjusted my function to read the 4.5 figures, no sedimentation time and a discrete value of 0 for the trigger delay (accuracy is not very important... I need speed here). With the caveat agree that a RTOS could be better adapted to do this, if time and money were no object, I need to make it work with what I have now.

  I inserted a measure of time time/arrival departure before and after the call to the function of reading (using DateTime.Now.Ticks; 1 graduation = 100ns) and I'm in a position approximately 30 m even with General treatments, I can't believe it should take as long to process this function with all the stuff on the meter power off delay. Am I missing something? My NOR-DMM function calls are as follows:

  ...

  ...

  PXI4065_Session1.ConfigureMeasurementDigits (DmmMeasurementFunction.DCVolts, 300, 4.5);
  PXI4065_Session1.trigger.DelayAuto = false;
  TimeSpan triggerDelay = new TimeSpan (0);
  PXI4065_Session1.trigger.delay = triggerDelay;
  PXI4065_Session1.trigger.source = DmmTriggerSource.Immediate;
  PXI4065_Session1.Advanced.SettleTime = 0;
  measuredReading = PXI4065_Session1.Measurement.Read ();

  ...

  ...

  Help, please!

  Hi mdbeaster,

  Could you please check whether the following suggestion by experts of the NOR-Dmm driver is useful.

  Quote

  'Play will be called implicitly initiate and then pick up, but the way that the client is to set up the device, it is necessary.

  Multipoint could be used in this case, since the customer is not actually reconfigure the DMM, they are just reconfigure something else based on the measurement of dmm.  The customer needs to use throw and fetch the multiple instead of read.  They then pick up all available steps and use just one more recent for their calculation.  This should allow them to get under this requirement of 5 ms (I got it for less than 1 ms with no calculation).

  A better way is to use multipoint with software triggers.

  This ensures that the client does not receive a stale measure and use these stale in their adaptation of all data which.

  (1) configure mode/range/settle time
  (2) setup for multipoint with enough points for the period of 1 second
  (3) configure the trigger to the software
  (4) Insider
  (5) in a loop:
  (a) send software trigger
  (b) fetch
  (c) use as you like.

  Thank you best regards &,.

  Ramanantsoa

• I'm looking for the correct drivers for a card 180810-01. I have no drivers or documentation and HD crashed.

  I have a card GPIB 180810-01 which was part of a proprietary system which we have inherited. HD crashed and I can't find any documentation or the drivers for this card. None of the diagrams in the documentation, I found matches the physical layout of the Board of Directors. I can get it to connect with a Keithley 196 DMM, but it seems to be slow. I can communicate with a Timer/Counter Phillips using RPIC. However, when you try to communicate with the T/C in real time, the computer never gets a response from the T/C and the system hangs. What would be the correct driver and where I can get a description of hardware parameters?

  Thank you!

  I have solved my problem. I found an old computer that had drivers and ibconf of 1984. After changing the module clock of TI, I copied the files on the other computer and my problem of communication is no more. Thanks for the comments!

• PCI/4070 Flexdmm with Windows 7

  See the datasheet shows Vista/XP Compatible and has been wondering if puts up-to-date or another gives Windows 7 compatibility? Thank you

  The latest NI-DMM driver is version 3.0.5 which will work with the PXI/PCI-4070 and works with Windows 7. It is available for download here:

  NOR-DMM 3.0.5-Windows Server 2003 R2, 32-bit/XP 32-bit/Server 2008 R2 64-bit/Vista/7

  Hardware devices (DMM) to support the hardware and the software requirements are listed in the Readme of the driver download page.

• Can't get fallout 3 for work

  Unable to get Fallout 3 to work with Win7, it worked fine with Vista 32-bit, Morrowind and Oblivion work fine on my Win7 (same game engine, different versions) computer. I contacted Bethesda and they responded with an answer completely generic copy/paste, I'll throw the body of the email here for everyone who can help to get on the same page.

  Hello, please note that the program is not tested or supported in Windows 7. You *.
  may * be able to run the program in Windows 7 compatibility mode, but we can not guarantee that the program will run properly in this new operating system.
  Program compatibility is a mode in Windows that allows you to run programs written for earlier versions of Windows. Most programs written for Windows XP also work in this version of Windows, but some older programs might run poorly or not at all. If an older program doesn't work correctly, start the program compatibility Wizard to simulate earlier versions of Windows.
  To change a program compatibility settings:
  NOTE: Do not use the program compatibility Wizard the on old anti-virus, utility disk or other system programs, because it might cause data loss or create a security risk.
  NOTE: If the compatibility options are grayed out, then it is a 64-bit program and cannot be changed.1. Right click on the program icon.
  2. click on properties.
  3. click on the Compatibility tab.
  4. check the box "run this program in compatibility mode".
  5. choose the version of Windows, the program was made for. For optimal compatibility, choose the latest version of Windows, so that the program was written. If you are not sure, check the system requirements for the program.
  6. it may also be necessary to check the box for "Run this program as an administrator."
  7. click on apply and OK Hi,.
  Fallout 3 crashes to the desktop on game-starting, I reinstalled and tried to load the game with no patches, mods not, no utilities of any sort, and it still crashes. I don't know what to do, and it seems that the questions related to this issue will not resolved on the Bethesda forums.
  Here is my system information:
  OS: Windows 7 64-bit
  Motherboard: Asus P5N - T Deluxe (Nvidia nforce 780i chipset)
  CPU: Intel Core 2 Duo E8400 (3 GHz)
  RAM: Corsair DDR2 6 GB memory
  VGA: Nvidia (BFG) GTX 285 1024Mo (196.21 driver version)
  Sound card: integrated
  (Just an info, I have the Steam version, but I doubt that it is important). I used to play the game under Windows Vista (32-bit), and it worked very well, the computer is exactly the same as it was before I switched to windows 7.
  See the DXdiag attached for more details, I doubt that you will find something good. Wrong to throw the DXdiag on my skydrive for those who want to see (http://cid-51b65177f7aebc51.skydrive.live.com/browse.aspx/.Public?uc=1 ) if the link does not work I will paste the text here. Sorry for the formatting I don't know how to fix it.

  Hi Tehori93,
       
  The information that you received from this team of support for the games are good. Fallout 3 is not compatible with windows 7. You may need to wait until the game manufacturer releases a patch or windows 7 compatible game Fallout.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=fallout%203

  Kind regards
  Umesh P - Microsoft Support

• Windows Media Center ERROR: "some of the files needed to play radio or video are missing or corrupt." In Vista x 64

  It was working fine last week and now I get this error in Windows Media Center, "some of the files needed to play radio or video are missing or corrupt.
  Record of components Windows Media Center may have failed. »

  HUH?

  I use Vista x 64.

  I looked this error and ran sfc/scannow in administrator mode.  It took about 15 minutes and he said that some errors have been found that cannot be fixed.  I can NOT open the log file to display errors, because when I find it and click on it, it says "access denied."

  The basis going on, and made the Windows Update, I just ran on 13 April to break and corrupt something?

  I fixed that by returning to NVIDIA 196.21 driver version.

• Problem of different cursor in CS4 and x 64 Ultimate Window7...

  My first post, I'm frustrated and looking for help. I see three ghostly sliders (pointing to the hands or fists), when I mouse over some choice in PS4 (11.01, the most recent version); as the selections at the bottom of the channels or when "transform" is active.

  
  I have built a few PCs and computers have made since the beginning of the 1980s. It's making me nervous! I tried everything and did a lot of research.
  I have Windows7 64-bit Ultimate, with the latest updates. I have an almost brand new MSI (Nvidia), 9800 GT graphics card and fancies two monitors. Photoshop PS4 (version 11.01), and... what else? A PC that didn't give me no questions (in Photoshop), until what I loaded Windows7!
  
  I tried to install the latest Nvidia driver 196.21, several times.  The last time that I have saved files in the nvidia folder in the program files area.  The last time it took more time and my screen flashed and he said: it has been installed (but it still says that it is installed) and after that no change in the characteristics of driver Windows. He said that I have the old driver Nvidia, "8.17.11.9621" hell what number is that?
  
  I can not get the 196.21 driver to install. Windows says I have later.
  Now, I read on people with partial cursor problems in PS, but anyone with my problem. Such a piss you don't know if it is Nvidia, Windows7, or Photoshop.

  Finally, I tried to turn off 'Enable OpenGL drawing'.

  3 cursor problem could this Council provided recently by dec9.  "You have your computer display settings set higher then 100 dpi.". Change it at or below 100 percent. "It worked for the other poster.

  I've seen posts that said user was to go and "rub" on the old drivers as an update was simply not overwriting the old completely.  Not a geek so hope this helps.

• Driver for Keysight 34461 A DMM instruments works with GPIB, errors with USB

  I try to remotely control a DMM of 34461a Keysight using the driver of instruments located here:

  http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=21589

  The pilot of the aircraft works like a charm the DMM is connected via GPIB, but it error when connected via USB.  I've isolated the problem to "Default Instrument Setup.vi".  When this VI is called in the case of USB, the device is left in a State which translates by a later call a time-out at VISA Read.  The only way I found to get the instrument still talking after this occurs error condition is turned off.  I have an another 34461a with the same behavior, is probably not a hardware problem.  I can successfully run the example 'Agilent 3446 X series Acquire Single.vi' via USB if I remove all calls to "Default Instrument Setup.vi.

  Everyone knows this unit or a similar problem?

  I use Windows 7, 2014 SP1 LabVIEW, NI-VISA 14.0.1 and GPIB-USB-HS + (OR-488. 2 14.0) when using a GPIB.

  Since the Readme file

  3 known issues

  Agilent IO Suite must be installed to use the USB interface.

• Satellite A200 - 196 how can I restore the Partition from Toshiba hard drive?

  I need to restore my hard drive to factory default.

  I tried now pressed the 'Zéro' key at startup, also tried one at a time, hold down F2 and F8, F10, F12, but none of them put me in the Recovery Wizard.

  I searched the help files on the PC and online but nothing helped.
  Someone at - it an idea how I can get into the recovery partition it please?

  Hello

  You should be able to start the installation of HARD drive recovery as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please note: this will not work if your laptop works with the factory settings. If you have used clean OS installation HDD recovery no longer unavailable. For the installation of factory settings, you must use disk recovery DVDs.

  Everything must be described in the document s user manuals.

• Satellite A200-196 - corrupted display driver

  The download display - 20070809135415.zip file is corrupted when downloaded from the Toshiba site, it is the VGA driver for this laptop.

  Any chance someone has a valid copy, that they could send me or is there a moderator on the site that can get this sorted file please?

  Hey Buddy,

  Why the driver is corrupt?

  You get an error message or what is exactly happening?

• Satellite L20-196 - updates to the Atheros WLAN driver

  As may relative novice, I ask why Toshiba have updated the version of the driver (Windows XP) wireless lan Atheros three times in the last two months? The last update 25/05/11. It would not be because it's still a beta version and it would be better to wait for a final version?

  Thank you.

  Hello

  Only the Toshiba himself knows why they have updated the driver. Here it s only a user to user forum so I doubt someone can answer your question because only this is no people of Toshiba.

  But why is it so important? If you n t have any problems you can forget the driver updates. This is only necessary if something doesn't work properly.
  Theoretically the new drivers don t contains bug fixes and supports Atheros WLAN cards. Who knows?

• The problem of the driver NOR DMM 3.0.1 update

  Hi, I'm trying to download the new version 3.0.1 of the DMM in my computer, however, he said "the compressed (zipped) folders error: Windows cannot open the file, the compressed (zipped) folder is invalid.

  did anyone get this problem? I have already download twice, but the problem remains the same.

  current version of DMM: 2.9

  Hello!

  I just tried to download the zip file myself, and I had no problems with it (even if it was in the network of the company, that may have some effect).

  However, a quick search revealed the following Microsoft KB: Zip files downloaded with Internet Explorer are not stored on your computer

  The error you described seems to occur when you use Windows XP and download through Internet Explorer by default Zip program files compressed (zipped).  There seems to be several solutions to this problem, which is the link.

  We also provide a small Downloader application with NOR-DMM 3.0.1 which avoids the problems caused by interrupted data transfers.  You can also try that give it a shot instead of download the zip file raw (you get the same file to be in the end).

  Please let us know if this solves your problem.

  Thank you

  Tobias G.

  National Instruments

• Help with niSwitch example of DMM switch Handshaking

  I have a bit of trouble getting my stint of PXI-2575 multiplexer and PXI-4071 DMM talking to each other.  "" They are located in a PXI-1045 chassis on which I am currently running the "niSwitch DMM Handshaking.vi switch ' example.

  At the moment all I'm doing is read in a DC using this example.

  SWITCH

  Topology: 2575/1fil 196 x 1 Mux

  List of Scan: ch0-> com;

  Trigger entry: front connector

  Advanced analysis of output: front connector

  DMM

  Type of measure: Volts DC

  [...]

  The destination full measure: external

  Source of relaxation: external

  Then try to run the VI, I get the following error:

  Possible reasons:
  Driver status: (Hex 0xBFFA6B9F) DAQmx 89120 error has occurred:
  Terminal of source routing is not found on the device.

  Make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals.

  Property: DAQmx_DigEdge_AdvTrig_Src
  Property: DAQmx_DigEdge_AdvTrig_Edge
  Source device: PXI1Slot7
  Terminal of source: TrigIn

  Status code :-89120

  Of course, I'm new to this.  Help, please!

  Thank you.

  Hey Sean,

  Looks like we have a differential of 2 volts. We will use 2 wires 98 x 1 and the following connections:

  The help of switches:

  

  On this basis, we can see in the lower right that CH0 + is pin 1 and CH0 - pin 2.  We need to hang the signal of 2 volts at pin 1 and pin 2 land.

  We hang the DMM HI COM + (PIN NUMBER 173) and the DMM Lo-COM (PIN 174).

  Now all we have to do is open switch Soft blanks Panel ('start' programs' National Instruments' OR-Switch), select topology (98 x 1 2 son) and connect CH0 to Com.  If we take a DMM measure, we should now read 2 volts.

  Now that we have all this work, we will make it faster by using the example of transfer protocol you mentioned previously:

  Suppose we want to connect channel 0 to com, take a measure, then connect the way com 1, take a measure, and then connect track 2 com, etc. all the way up to channel 15 to com.  A scan list that performs this operation is: "ch0-> com; CH1-> com; CH2-> com; Ch3-> com; CH4-> com; CH5-> com; CH6-> com; CH7-> com; CH8-> com; CH9-> com; Ch10-> com; CH11-> com; Ch12-> com; ch13-> com; CH14-> com; CH15-> com; ».

  We can simplify this scan to help list of ':', the following: ch0:15-> com  This is equivalent to the same actions as above, but is much easier to watch.  I hope this is enough information to get started.  Let us know if you have any questions.  Have a great day!