key listeners triggering tools of the IDE Flash rather than the SWF events

Similar Questions

• Can this be achieved in Flash rather than Flex

  Hello

  I found something that resembles features I need:

  controls http://blog.flexexamples.com/2007/09/19/dragging-Rows-between-two-different-Flex-DataGrid-/

  I was wondering if this is possible in As3 with Flash CS5?

  Thank you

  Shaun

  you will need to encode that.

• The SHIFT key has no effect on the elliptical tool any ideas why?

  When I use the elliptical machine and tool Rectangle the SHIFT key has no effeft.

  Someone at - it a solution please?

  What operating system?

  What version of PS?

  Can you tell us a little more about your workflow?

  Nancy O.

• Satellite A300D-205 - tools for the multimedia keys

  Hi guys.

  I installed windows XP for my Toshiba Satellite A300D-205 and all devices to work perfect except the media touch buttons. It works with Vista, but it does not work with XP.

  Can you give me some ideas (or tools) how to operate?

  Thank you.

  Hello

  Are you kidding me? You can download all drivers & tools on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know that you have need of the common Modules, Hotkey Utility, Touchpad on / off and utility for multimedia and the FN keys.

  But I m wondering that you want to use Windows XP. It's the past, and now the best OS is Windows 7. Have you tested it yet?

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• Folio 9470 m: "lock" function key is triggered by an action on the touchpad

  On my laptop Folio 9470, I touch the touch pad in a way that locks the control key. I do not know what causes this behavior - everybody knows it?  All the keys I touch on the keyboard's behavior as if the command is also pressed at the same time. For example, when I press 9, the behavior is obtained by pressing Control-9. I have to restart my PC to get out of this mode because I don't know what triggered it in the first place.

  Step 01. Click the Start button and select Control Panel
  Step 02. Open Device Manager and expand the keyboard in the list
  Step 03. Right-click on PS/2 Standard Keyboard and click on uninstall
  Note: This driver will settle again automatically on your laptop
  Step 04. Please turn off the laptop
  Step 05. Disconnect the power/AC adapter and also remove the battery too
  Step 06. Press and hold the power button of the laptop for a minute
  Step 07. Now re - insert the battery back in and plug again the power supply/adapter
  Step 08. Start Notepad and keep pressing the F10 key during startup to access the BIOS
  Step 09. Once you get the BIOS, please press F9 or [model] F5 key to load the default Installer for BIOS
  Step 10. Use the arrow keys to say 'YES' and press enter
  Step 11. Now press ESC/ESC. Save Changes and Exit - Yes
  Step 12. Now, please wait until the unit load the Windows operating system

  Now please re - install the drivers for touchpad of HP Web site in order to solve the problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  K N R K
  Although I am an employee of HP, I speak for myself and not for HP

• Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  Adobe flash CS6 crashes when you use the text or Word of edition tool all the time... Please help!

  No one can tell you anything without the proper system or other technical details info. The standard answer with all the problems of text is quite simply, you have a "bad policy" on your system and need to get rid of him.

  Mylenium

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• Satellite L500 - FN keys do not work after the upgrade to Windows 7

  Hello
  Satellite L500-PSLJ3E, upgrade to Windows 7 64 bit and none of my function keys work with the fn keys. Value added and Flash Cards Support utility package are installed.

  Anyone know how I can solve it?

  Thank you very much

  Hello

  Have you installed the latest tools of the Toshiba page? If you install both VAP should be installed first then Flash Cards Support utility.

  In addition, I would try to clean the registry with CCleaner.

  In the forum here is already a few discussions on this issue. You must also use the forum search.

• Event listeners generate errors while the modal windows are shown.

  Hi all

  I have an interface in ui script that relies on headphones for events initialized as follows:

  		var button = palette.add ('image', rect);
  		button.onDraw = buttonDraw;
  		button.addEventListener ('mouseover', onMouse, false);
  		button.addEventListener (onMouse, 'mouseout/mouseouthandler()', false);
  		button.addEventListener ("mousedown", onMouse, false);
  		button.addEventListener ("mouseup", onMouse, false ");

  I need these events if I change images (false buttons) when the user moves the mouse over them or click on one of them. Everything works as it should, until I decided to give something back. Although made in After Effects, a window or something is open somewhere and it makes all the unnecessary scripts, they do not meet the entry to any user, and it is very good for me. It works the same for all of the scripts that I tested.

  The real problem is with event listeners. The scripts that use will generate them a substantive error if no listener is enabled. And when rendering finished, AE will display a pop-up allowing you to know these errors. Also the interface script stops turning completely until you close open again.

  The error message is:

  "Cannot run a script so that a modal dialog box is waiting for answer".

  I thought to replace all the headphones by the other type of reminder like 'onClick', but it seems that there is no work around to "mouseover" or "mouseout/mouseouthandler()".

  It is a real problem for my user interface, as if the user has my Panel anchored somewhere in the interface and simply move the mouse on one of the buttons, it will end with the error at the end to make it. There are also I can't do anything to avoid the listeners to run, because once the script is loaded, we lose all control of what goes with it, no way to temporarily remove listeners.

  Any ideas on how to solve this problem?

  I found a solution to my problem.

  I had to remove the listenerer of the 'mouseout/mouseouthandler()' event when my custom onDraw function has been executed as a result of the actual mouse out (in other words drawing my picture in the iddle version). Then I just reinstall the event "mouseout/mouseouthandler()" at the "mouseover" event is triggered.

  I also tried to remove the "mouseout/mouseouthandler()" in my function onMouseOut listener, but it did not work very well, the only way was to remove it in the custom onDraw.

  Another thing, I discovered, is that the "mouseout/mouseouthandler()" event is actually fired 2 times... every time! That's probably a bug.

  I'll mark this as answered even if it's more as a workaround that dirty a real difficulty. I think it's a bug in After Effects (at least).

  UQg about your question, do you have a thread for it? Otherwise, you need to create one, I also have this problem and I'll look into it.

• How to trigger the F6 KEY to a single form, the default behavior for others?

  We use Forms 10g Release 2. Our client has a requirement like this: in the form only one , they want the entire form to clear (i.e. the clear form) when they press F6 (clear instruction).
  
  Now, in our forms, we use the default fmrweb.res. So, because of what happens when we press F8 on the keyboard now noting.
  
  To clear the form when the user press F6 key keyboard I did the following to the fmrweb.res .
  

  # Commented this line 
  #117  : 0 : "F6"             : 62 : "Clear Record"
  
  # Added these 2 lines to the bottom 
  
  117 : 0  : "F6"  : 88  : "Function 6"
  117 : 8  : ""    : 62  : ""

  Now, I create a level trigger and shape KEY - F6 and put CLEAR_FORM; in this.
  
  Now, when I run the form and press the F6 key, the shape is erased. To make it work.
  
  But the problem is the following. Other forms when we run and press the F6 key, we get

  FRM-41008: Undefined function key....

  What I've discovered, is that when we make meanings (e.g. change the fmrweb.res) We MUST create a trigger of the F6 KEY and put the code.
  
  Problem is that we have 100s of forms in our application. Since we want that this feature only in this form (i.e. for F6 clear the entire form) and other forms should operate as usual what we can do?
  
  Any help would be greatly appreciated.

  The trigger for the F6 KEY has nothing to do with the F6 key on your keyboard. The Fn - KEY triggers are triggers defined by the user that you associate with a key or combination of keys. Yes, you can map the KEY - F6 to F6, but this isn't a good idea.

  In your case, it is much easier. In the form where you want to RECORD CLEAR CLEAR form, just redefine KEY-CLRREC:

  Clear_Form (No_Validate);

• Cannot find tools on the thunderbird page

  I bought a new laptop and cannot connect to my email account password does not work. I need to change the password and everything I read says to go to tools and find change password, I can't find the tools on the task bar of Thunderbird.

  As for many Windows applications that hide the menu bar, you can usually enable it by pressing Alt or by pressing the F10 key. Do any of these work for you?

• By mistake I pushed a key combination who brought up the sensitive design mode. What is it?

  I pushed a key combination which has upped the reactive design mode by accident. What is sensitive design mode? I have no knowledge of web development software or anything more involved than the navigation programs. Just curious.

  Note that the ' tools > Web Developer "shows all the tools of web development with their keyboard shortcut.

  • Press the ALT key, or press F10 to display the Menu bar.

• Could not load any websites. I don't get any 'error message', the 'enter' key has no effect in the address bar. Works fine in FF and IE search box.

  Entering a URL in the address bar and pressing on enter does nothing. Or the 'enter' key or 'address arrow bar', to go to the site function. Web site does not load and no error message appears. 'Enter' key works very well in the FF and IE search box, is not my keyboard.

   Tried most of the recommended fixes under the "Error loading websites" article with the exception of "DNS refetching", as typing "about:config" in the location bar does no good as the "enter button" won't function. I've removed and re-added FF back into the windows firewall, removed ZoneAlarm from my system, edited proxy settings, deleted and reinstalled FF several times. NOTHING WORKS!!! I'm a die hard FF fan and this is KILLING me. Please HELP!!!
  

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Satellite P855 - function keys do not work after the upgrade to Windows 10

  Function keys do not work after the upgrade to Windows 10
  I know that I need two drivers (Flash cards support utility) and (Toshiba function Key Utility), but on the page download Toshiba is not suitable for Windows 10.
  Anyone know when and if it will be available?
  Thank you

  I'm also waiting for Win10 of things and do not know with certainty how Toshiba will start with the support of Win10. I hope that will happen soon.