Key-(polled) fast

Similar Questions

• Series of HP DV7-3000 - Dv7-3085Dx - problems with launch of key wireless, fast

  I have some problems with my laptop HP Pavillion Dv7-3085Dx with Windows7.

  I had a problem with my quick launch buttons, none of them work... Mute, Play/Pause, Stop... and especially the wireless button...
  My biggest problem is the wireless button, because I'm not be able to turn it on...
  After a time there... I used it normally... but I got used to the Windows + X to enable and disable my wireless...

  But now I can't use my wireless sort!
  Windows + X: The button is disable.
  BIOS: There is no option to turn it on.
  Net Manager: the Drive of WiFI is accurate, up-to-date and there is no signal problems.

  I have already desisntall and install the newest drive, reinstall the Windows...
  and no result...

  @jcbrasileiro

  Hello

  Do a hard reset:
  1 disconnect all devices and remove all USB devices and multimedia cards.
  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.
  3 reconnect the power adapter (do not connect the battery), press the power button.

  Verification is your problem is resolved or not.

• Search fast-forward

  Hi guys

  I use PrCC2014 on Windows 7, 64-bit, SP1 with a ' QWERTY ' of UK . I am working on a client project where I need to go 5 or 6 hours of football to find 60 / 90 seconds of cut-ins. I can speed up the process a bit by using the right arrow key. However, I thought 'F' is the abbreviation of fast forward, but it doesn't seem to work (at least not on my keyboard).

  Can someone tell me if there is a keyboard shortcut, so I can fast forward through the images and affecting it is on a UK keyboard? Any help to speed up this part of the work would be welcome.

  Kind regards

  Graham

  As far as I know the F key is fast forward during capture. I've never used, so can't really say.

  But if the movie is already captured, repeated clicking on the L key will move faster and faster. Ditto for the market back with the key j. major K stops.

  It works in the source Panel and the timeline panel.

  I guess that the UK keyboard will work the same.

• erosion tools video keynote

  Hello, I'm looking for in a next update, be able to speed up a video in the software tools.

  Thank you

  Kind regards

  What do mean you by "speed up"?

  Maybe you meant a fast forward. If so, use one of these methods:

  using the mouse:

  Click and drag the playhead in control of game

  Keyboard well tempered using the:

  para and some L key pour fast forward

  para and a few key J pay back

  Use the K key pay pause

• Portege A600-Y12 - Bluetooth disappeared

  New here. 1 Toshiba. 1st post. Hello all :)

  Buy A600-Y13 = pink) of the Germany. I am not from German and switched OS win7 7100 evaluation. Downloaded Vista drivers and software available from the Toshiba site. Everything was fine until something strange happened.

  Connectivity: Wi - Fi work. Work of Bluetooth. Work of HSPA/HSUPA. I've been playing (now who wants to read the manual as long as things are going as planned = p) with the keys FN-fast and did not get it right how to work with them when I suddenly lost connection BT. Restart, nothing. There is no BT - this symbol under FN + f8 and I think that it has ever been. Am I missing a driver? Device Manager / hidden:

  http://img194.imageshack.us//img194/2258/captureym.PNG

  I hope that it's just something that I couldn't immediately and not a BT-unit broke. I really need to BT for phonesynchro and mouse,

  -nojones / Finland

  The section open "Bluetooth" on the top and the open part "System devices" are missing from your photo.

• problem of time machine Airport: finder does not

  Hello

  I use a time capsule from the airport. The connection works fine.

  However, I was doing a few files "organized" in the records of the airport and all of a sudden the finder would not respond. I tried to 'Force quit' the finder and start again or turn off 30 seconds time capsule, but the result is the same for a few days now. When I return to my main folder in capsule, automatically the finder is unresponsive and I have to restart the finder.

  One of the reasons could be that when I was doing 'organized' files (like move one folder to another, etc.) he too complicated (large files) and then the thing all jammed.

  Anyway, if you guys might have a solution for me, this would not lose all my files I appreciate.

  Thank you very much for your time.

  All the best,

  Florent

  PS: I'm using an Imac, Yosemite, version 10.10.03

  Nothing will fix itself without some spoil your files... Something has stuck at halfway between the two and is now corrupted. Unfortunately, Finder can not work around the problem... If you did this correctly, you can use disk utility to solve the problem... but you cannot run disk on TC utility because it is a network drive.

  You have three choices I see...

  One that suits that I listed last.

  1 make the cleaning of the Terminal file. It's hard I think because you do not know which files you were moving around in time. And work of the terminal is for real experts or you can do more damage than you started with.

  2. use a windows computer connected to the CT... that sounds crazy, I know, but you will not crash explore like you do finder. Fix up (remove all the files that are half way moved). If you have been for example copy of records. (travel is not a method Apple uses... so what do you mean by moving?)

  Delete the moved folder... Make sure you have all the files elsewhere of course.

  3. There is a way around that could save...

  In airport utility go to the disk tab and select archive.

  You need to connect a Mac to format USB stick capacity equal or superior to all the files on the TC, including backup (tell me, you need not backup)... you can't be selective. And start archiving. Once you have it on a hard drive which you can then plug your computer... you can run the utility disk on it and fix the problems before opening finder... Once you have done this... Erase the zone folder on TC and copy it to the back of the USB drive repaired. This method may work best... it will cost you a USB... BTW, which is how you should have done this...

  Now the rap on the fingers. You can stop reading now...

  NEVER USE A NETWORK DRIVE TO YOUR HAND WITHOUT A BACKUP FOLDERS.

  When you handle files... do you not understand that each file must be copied TC - computer - TC. If you do more wireless... corruption is inevitable.

  All the key files should be on the local drive... A USB plugged into the computer is fine... but active faster the better... libraries and files will end by corrupted if you use files on a network resource and access more wireless... even on ethernet, it can not not... but more wireless, it's inevitable. Apple didn't build protection in the TC to work as a file server. You use software designed for local use.

  Always save... If this happened and you had the worst backups that could happen is that you need to clear the TC and copy the files back.

  Keep this and you will eliminate not only a few files but loads of them... maybe all.

  A time Capsule is not designed for running your files of overload... Plug in a USB key or faster in particular the iMac is great hassle since you can use in powered car and hide behind the computer... The TC is for your TM backups. Dragging files to it... you have now no way back up since the TC cannot save itself and Time Machine backup network drives impossible.

  End rap.

• Smartphones blackBerry Keylock

  I know it of maybe a silly question, but how do I stop the auto lock key so fast. Is it possible to adjust the timeout?

  Go into your menu options and the password section, there you will find the safety lead time option. Change there.

• Index and lines in cluster

  Thus, according to Oradoc: create an index if you frequently want to retrieve less than 15% of the rows in a large table. The percentage varies greatly according to the relative speed of a table scan and how data are distributed in what concerns the index key. Faster analysis of the table, the percentage is lower; more grouped data line, the higher the percentage.

  two or three paragraphs down

  http://docs.Oracle.com/database/121/Admin/indexes.htm#ADMIN11712

  With regard to the part I bolded ~ say rank clustered tables may be good candidates for indexing for tables/columns that would otherwise not indexed (I have an idea, the grouping is relative to the indexed key. I also know how it effects rebuild an index vs colescing).

  Is the instruction above a correct support on my part? I don't need a detailed analysis, I want to know if my assumption is correct as I go even further. I have read a bunch of google links, but this isn't the area on indexing, I want to focus on right now.

  Thank you very much

  Thus, according to Oradoc: create an index if you frequently want to retrieve less than 15% of the rows in a large table. The percentage varies greatly according to the relative speed of a table scan and how data are distributed in what concerns the index key. Faster analysis of the table, the percentage is lower; more grouped data line, the higher the percentage.

  two or three paragraphs down

  http://docs.Oracle.com/database/121/Admin/indexes.htm#ADMIN11712

  With regard to the part I bolded ~ say rank clustered tables may be good candidates for indexing for tables/columns that would otherwise not indexed (I have an idea, the grouping is relative to the indexed key. I also know how it effects rebuild an index vs colescing).

  No. (you said you didn't want a detailed analysis!)

  I'm now sure what you mean by "tables line cluster" but done doc refers to a regular job with a regular index table.

  And by "more grouped the data in row" doc refers to the factor of grouping of the index which is the index blocks how should be read to find the data you want.

  The data in the table can be in a SINGLE command. There will be one or more columns that define the order. This order will put the data with the values for the columns in the same block and ID of these blocks is then more likely to be in the same block index if you create an index on those columns.

  This article by eminent expert index Richard Foote comments on factors clusters

  https://richardfoote.WordPress.com/2013/05/08/important-clustering-factor-calculation-improvement-fix-you/

  And it explains an interesting new twist available only for the 12 c.

  https://richardfoote.WordPress.com/category/clustering-factor/

  There are several percentages thrown around as to when an index "could" be used. This quote from doc mentions 15%, others mention 20% or say things like 'low cardinality' and others.

  The reality is that there are other factors involved and you can't really base a decision on a percentage. A grouping factor will be useful for controlling a given and an index on the columns that determine the order of the data. So for a second index (third, etc.) the factor will not help.

  And you insert, update and delete data, clustering factor will also change. To influence the clustering factor, you literally sort ALL data, which of course means a full table scan and data transfer.

  It might be useful for a small set of use cases involving rare LMD data warehouse tables that are loaded in mass.

  Always test.

• Lightroom 5.5 crashing when I reject Photos

  I do not think that has happened before V5.5, but in the module library or development, if I click the button X several times rejected a series of photos, Lightroom will break.  Sometimes with "Adobe Photoshop Lightroom 64-bit has stopped working, windows is checking for a solution to this problem".  Then he said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "Then it only gives me the option closed.  When I restart, "the catalog named... was left in an inconsistent state.  Lightroom needs to restore the catalog before proceeding"flashes briefly on the screen.

  When he returns to the top, some of these photos, that I've marked as rejected, returned to a State that is not rejected and then the program seems to operate normally until... it crashes again.

  Interesting, I tried photos side by pressing the '1' key as fast I could shoot, and I couldn't plant, apparently related to the process of rejection.

  I'm stuck, any ideas?

  John

  Hi John,.

  Sorry for the trouble with break, try to install the DLL updated in this article, to correct accidents: Lightroom 5 note accidents, identification of the images. Windows

  Let us know how it goes for you.

  Kind regards

  Pete

• Double-click the problem when loading.

  Hi guys.  My site has been updated and brillianty running, but I just noticed something.  I have my navigation at the top of the page bar.  To load things, I do

  var myMovieClip = new contact_mc();
  var myMovieClip2 = new aboutUs_mc();
  var myMovieClip3 = new Join();
  var myMovieClip4 = new ourWork_mc();
  

  And then

  topNav_mc.addEventListener(MouseEvent.CLICK, gotoFunction);
  function gotoFunction(event:MouseEvent):void
  {
  
      for (var i: int=0; i< container_mc.numChildren; i++)
      {
          var child:DisplayObject = container_mc.getChildAt(i);
          container_mc.removeChild(child);
      }
      
      
      if (event.target.name == "about_mc")
      {
          container_mc.addChild(myMovieClip2);
          TweenLite.from(myMovieClip2, 1, {alpha:0, rotation:15});
  
      }
      if (event.target.name == "contact_mc")
      {
          container_mc.addChild(myMovieClip);
          TweenLite.from(myMovieClip, 1, {alpha:0, rotation:15});
      }
  
      if (event.target.name == "join")
      {
          container_mc.addChild(myMovieClip3);
          TweenLite.from(myMovieClip3, 1, {alpha:0, rotation:15});
      }
  
      if (event.target.name == "work_mc")
      {
          container_mc.addChild(myMovieClip4);
          TweenLite.from(myMovieClip4, 1, {alpha:0, rotation:15});
      }
  
  }
  

  As I say, it works fine.  But I accidentally just clicked a button twice quickly and it makes tweening stop at Midway, and the loaded content becomes semi transparent.  Then I tried clicking the button two times one another, and the same thing happened.  It happens when I click twice on a key very fast pace.

  Is there a reason that this could happen, or is there something in my code that I can do to prevent this?

  Thank you very much

  Nick

  One thing you could do is remove the event listener in the service and then add it after that the call of the Tween is completed.

• M-30 series: how to set the fast CD keys in use?

  Hi people, I have formatted the hard drive of M - 30 my friend. Everything is very good, except that I can't put the buttons for fast CD use in function (front left). Are there missing drivers?

  Hello

  you installed the Toshiba software utility CD & tools or have you downloaded these files of Toshiba home page?

  AFAIK you need Toshiba, Toshiba easy keys and Toshiba console controls.

  If you have problems again!

  Rudi Bye

• I'm unable to determine the correct HP Quick Web access to fast Internet security key

  I am unable to determine the correct HP Quick Web access to fast Internet security key?

  Hello

  You need to contact HP support, their documentation online and ask in their forums than
  is not a problem of Windows or Microsoft.

  These should help:

  Install and use the Applications HP QuickWeb
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02043846&cc=us&LC=en&DLC=en

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have more than 5000 messages in my windows mail inbox. Is there a faster way to remove several emails then hold down the ctrl key and click on individually on each e-mail?

  removal of several emails

  I have more than 5000 messages in my windows mail inbox.  Y at - it a faster way to delete several emails then hold the ctrl key and click on individually on each e-mail

  Yes.  Click on the email at the top of the page and highlight the bottom and shift, click.  Then delete the whole thing.

• HP Probook 5320 m hp keys of access fast works do not for example brightness

  Hello

  I am new to these forums and so don't really know how these words accurately.

  I have a probook 5320 m running windows 7 ultimate 64-bit and the function keys f1 = f12 does not work. I read in another forum that you download utility access keys fast hp. I did and thankfully most work, but one that is the most important for me is not for example the brightness keys.

  in another forum, someone entered the services and management of the computer and restarted hphotkeymonitor, yet once I tried this but I had no luck what so ever. all that appears is a small bar which is empty, showing the symbol of the Sun (brightness).

  Can someone help me please to solve this very annoying problem?

  Thank you

  Hello:

  Have you installed the Intel chipset installation utility and the applicable graphics driver for your model?

  Normally, the brightness is stuck on max and you can't change it, unless those who are required, the drivers are installed.

• Key fast usb 3.0

  I am looking for a reliable and fast usb key. Any recommendation?

  Alexander,

  I did a little research and found this HD Tune Benchmark data on USB 3 Flash drives that I can believe in.  This is an ideal flash drive 1 TB USB3 that looks great for only $893,99!  Next time I win the lottery I'll tell you how it runs