Key signature problem

Similar Questions

• Problem with BlackBerry key Signatures - 9000 "BOLD"

  Hello, I am developing an app for BB 9000 device, I already paid for the registration of key signatures, and I have them installed without problem.

  The question is why do I get the message ' attempts to access a secure API "when I try to run in the device?
  I use the following libraries:

  Import net.rim.blackberry.api.invoke.Invoke;

  Sorry to ask what is obvious but you are sure that all the cod have been signed? It is a separate and necessary step once you have packaged for deployment on a device.

• What's not in obtaining the key signature page?

  I have just installed momentics and tried to test the sample application.

  But I failed to get debug and the key signature of token because of web page problem.

  What I should expect that the problem be solved? Or y at - it another way to get these key and the token?

  Present problems with the integration of BlackBerry ID on the site of the developers, that causes this error.  I created a post about it (link below) and will update this thread as things progress.

  Problem with the BlackBerry Developer Site

• Signature problem when you run the program BluetoothDemo on Blackberry 8320

  Hello

  I try to connect from my computer to the Blackberry 8320 using a serial Bluetooth transceiver.  The "BluetoothDemo" program is not function properly.  When I run it, I first see a white screen with "Bluetooth Sample" at the top.  I click on the trackball and I get a menu with the options 'Listening to connections' and 'Full Meno'.  I click on listen for connections and a screen pops up that says "connect to an external device and then type something...» "I type something on the Blackberry and the letters appear, but no other options appear to verify a Bluetooth connection.  I have already associated the Bluetooth with Blackberry, but the connection failed appears when I run the program BluetoothDemo. When I click the trackball again, I see the full menu with "Serial Port close',"Get DB", etc..

  In my view, that there is a problem with secure API signatures.  Obviously the 'BluetoothDemo' program is not run after the first steps.  When I debug on Blackberry, I see the following output from the console, which leads me to believe that there is a problem with signatures:

  ocusHistory: Focus lost; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  JVM: bklt @286061: timer
  JVM: bklt @286061: idle 15
  JVM: bklt @292270: setTimer 15
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.api.ui.MediaController
  MWC: BluetoothDemo (4738) No sig 0 x 33
  From BluetoothDemo
  MWC: BluetoothDemo (4738) No sig 0 x 33
  BluetoothDemo (167) started
  BluetoothDemo (167) foreground
  FocusHistory: Acquired Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Home screen App; Component net.rim.device.apps.internal.ribbon.launcher.RibbonIconField
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  FocusHistory: Acquired Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  FocusHistory: Lost Focus; Bluetooth demo app. Component net.rim.device.api.ui.menu.DefaultMenuListField
  BT: allocSerialPort a0d729a8
  BT: sdpAddRecord
  BT: allocSdpAttributeData
  FocusHistory: Lost Focus; Bluetooth demo app. NULL component
  BT: SppWrite-1 failed: 1
  Unable to write data. Exception: java.io.IOException: BtSppWrite failed

  I was puzzled at first running the program of BluetoothDemo and initially built and generated a file alx for the com_rimbluetoothserialportdemo program, which I think is used by the BluetoothDemo program.  The com_rimbluetoothserialportdemo program is currently connected to Bluetooth tx/rx, as indicated by the status of remaining devices firmly on instead of flashing (when BluetoothDemo runs the status light flashes, indicating no connection). When I switch between workspaces in which I have these projects, the set of keys is not signed, and I have to sign in again, which seems to cause the keys in the other workspace to become not signed.  As further evidence of the strange signature problem, sometimes when I run either on the Blackberry there is an error that says that the application is not signed.

  I want to delete the workspace and the file alx com_rimbluetoothetc could be a step in the right direction.  Do I have reason to assume that the 'no sig 0 x 33' is a problem with API signature secure?  Could BluetoothDemo access to com_rimbluetoothserialport and be denied because there no signatures?  Thanks for any help you can provide.

  Not sure that your reading of the code is correct.

  _dout.writeInt (JUST_OPEN);
  _dout. Flush();

  These two statements will write out - which seems to be the first thing the code does.  Then it goes into a loop of reading, but suppose a specifically formatted data.

  In my test, I removed these and replaced with something that I thought he would be working and I'm depending on the device.  As noted yesterday picked up O the data of a GPS puck - these things just send data, they never expect anything in return.  So my code looks like this:

  byte [] buffer = new byte [1024];
  for (;;) {
      int len = _din.read(buffer);
      String justRead = "Read: " + Integer.toString(len) + " bytes: " + new String(buffer, 0, len) + '\n';
      System.out.println(justRead);
  }
  

• Signature problem app!

  Hi, I have developed an application that downloads a text message and a picture on a web server and php stores it in a mysql database and the photo in a folder on the web server, which means that I am using the camera in my application.

  I have a simple signature for blackberry smarthphones key, but when I connect the app I have problems because only the optional files are signed and not the required files, so when I install the app on the phone displays a warning of a security problem.

  I don't know if this happens because I use simple signature key or I need a signature with access key to ensure the items?

  Please help me.

  Thank you.

  You have several software for BlackBerry OS 7.x and low development kits installed?  If you do so it is possible that you have installed keys in the different software development kits.  To solve that choose the option import in Eclipse and point to another location.

  The 10 BlackBerry and the BlackBerry PlayBook SDK do not have this problem because they store their key files in a central location.

• Can I use the same key signature for the WebWorks bar and bar of the Android app?

  I have applied the signature key for my WebWorks Playbook applications, works without problem.

  Am I able to use the same key to sign transformed Android apps?  Tried several times and always got error: invalid password, while the same key/password works fine with Webworks bar signature. Don't know if I did something wrong or I have to apply a new key for the signature of the Android app.

  Thank you

  Yes.  This is discussed here: http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/What-happens-when-the-signing-cer...

• Signature problem

  I have a problem bizarre signature.

  I got signiong of blackberry keys, but whenever I try to sign the project or creating a package, he signed only a few files and it is 1 or 2 files left that never gets signed and remains stuck at "receiving Response.

  What's worse is that whenever I try it is another file that is stuck, but not all have signed them.

  

  Hi Mark,

  I finally solved the problem by UN-install the JDK 1.7 and all facilities for java 7.0 partner.

  and back to Java 6.0 and JDK 1.6.

  But with Java 7 do not work your updates on 18 October.

  I have indigo eclipse and Java plug-in Helios eclipse on windows 7.

  I have redwonloaded and r-installed all of your updates, but nothing has worked with Java 7 and jdk 1.7.

• is there cod signature problem today?

  I encountered this problem when I want to sign my Silverligh

  It returns me:

  Signature of operation for the customer because they have not met ti unable to code signing tries left.

  Thank you.

  This is usually caused by (accidentally?) by clicking on the button revoke, which disables the keys of your signature.

  Contact [email protected] and request a replacement set.

• I need admin assistance. The key signature order form must be set.

  Hello

  I'm at a point where it was the only place where I could ask for help and I'm hoping an admin can get this info from one who can resolve the issue. I'll explain why, after I mention the problem.

  I encountered a problem on the order of signature keys that prevents me to fill.

  Here is the page;

  https://www.BlackBerry.com/SignedKeys/

  The "State/Province/region:" drop-down menu contains no value, and it is a required field, so there is no way to fill in the form.

  The reason why I'm writing this question here in the forums, is because Blackberry Website feedback link "[email protected]," which is located under the Contact section, is seeking an automated response that has absolutely nothing to do with your real comments, but suppose instead I'm a technical person supports.

  in any case, I hope that is the right eyes and I was clear.  I have my Playbook, I have the SDK installed under Flash Builder, so now I just need chips so I can test directly on the device.

  Thank you

  Hello

  do you have what country selected?

• Key command problems, Macbook Air

  In a first time, I realized that 'cmd + 2' not was not to give me a '@' but instead would turn tabs on chrome, same for the hashtag. But the "cmd + c" or "cmd + v" were operating normally.

  I went into system preferences and tried to restore all the default keyboard settings, still nothing. I had to go the keys command and Option before it finally worked. But then new problems, even if the "1,2,3...' buttons now worked with cmd I have to use ' alt + c/v ' to paste instead of the normal cmd + c/v. Also, before I had to press cmd + a keys "F1, F2, F3...". "to make them work (such as the volume, for example), now I have to use fn + 'F1, F2, F3...". »,

  It happened all of a sudden, I have a few theories of how it happened: I slept last night on my keyboard, I kept my laptop in a few days (software because of this problem maybe?), and finally, I connected my pair of speakers today (a thought that never posed a problem before).

  Although I managed to find a temporary solution, I want to get my keyboard will work as before. Anyone got a solution please?

  So, apple won't let me delete the question, if someone wants to know more about this problem here:

  As I said I fell asleep on my keyboard, because I spent the last hours of 10 studies, my brain was so tired that I forgot the '@' key is "alt + 2" and not "cmd + 2", I really spent two hours of navigation for the 'solutions'.

  So many children, go to sleep and do not leave final kill you.

  At soon xx.

• Lenevo Z580 key lock problem

  I bought reliance Kolkata Z580 August 4. I am
  really very satisfied with my purchase even after the purchase of
  authorized dealer. We've checked the machine, the best way possible and
  a machine at home. At home when we started typing a single key
  'W' is completely forthcoming when you press the right side of the key. I went
  the shop of Reliance and show them the problem they redirect me to the
  Lenevo Service Center and they r saying that you have not checked
  properly at the time of the sale. I went to the Service centre and departure
  They said the 14th day of purchase, that it is not under
  warranty. You have to pay or appeal in Bangalore to approve the total amount
  replacement of keyboard. After a few words with the receptionist, engineer
  verified correctly and told me it is not broken. The key to the inner
  locking is faulty. They took my details with the snapshot of
  the key and told me if Bangalore will be approved them they will replace
  the full keyboard. My complaint is why should I pay Rs 43000 /-for a
  faulty laptop. I will not replace the keyboard. I want the total
  Replacement laptop. I won't take this defective product.

  I'm asking them to do what is necessary for the replacement of the defective product.

  Waiting for your prompt action and response.

  He was replaced by Lenevo without any chareges

• Problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.768.2 locale ID: 1033

  I have a problem in my laptop,

  This is the detail of the problem.
  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.2

  Locale ID: 1033

  More information about the problem:

  BCCode: c000021a

  BCP1: FFFFF8A000099840

  BCP2: 0000000000000000

  BCP3: FFFFFFFFC0000001

  BCP4: 0000000000100620

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Hello

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• key USB problem

  problem detection usb pendrive. AutoPlay opens and when clicked on the response of the reader opens. Now if I play any file or copy it says not responding do not. also I'm unable to copy multimedia files. It takes too long or does not copy.

  USB key opens in the pc with different antivirus programs

  Hello

  ·          What version of the operating system is running on your computer?

  Run a scan on the flash drive antivirus:

  You can use the Microsoft Security Analyzer by clicking on the link: http://www.microsoft.com/security/scanner/

  Note: once a virus is removed, you will need to reinstall some software, or restore lost information.

• Problem with MS flight Simulator & acceleration. __Problem signature: problem event name: BlueScreen__ OS Version: 6.1.7600.2.0.0.768.3__ locale ID: 1033

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: d1
  BCP1: FFFFF80003BA6F4A
  BCP2: 0000000000000002
  BCP3: 0000000000000008
  BCP4: FFFFF80003BA6F4A
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\061410-12448-01.dmp
  C:\Users\Joseph\AppData\Local\Temp\WER-21777-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104...MP;clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Joseph Blair

  System Specs:
  Mobo: Asus P6x58d Premium
  Processor: Refrigerated by an Intel i7 980 x (4.5 oc) liquid
  6 GB of DD3 RAM
  Intel SSD boot drive 40 GB W7 Home
  2 x 300 GB WD Velociraptor (dedicated FSX drive)
  HIS ATI Radeon 5870 GPU (oc of factory)
  PSU Corsair TX950W (7 fans)
  NZXT fan controller
  Corsair 800 d case

  Hi Joseph,.

  (a) when exactly you get this error message?

  (b) was your game works well before?

  Error messages on blue screen are normally related to the material, the following steps are worth a try:

  Step 1: Disconnect all external devices (printers, scanner, USB(universal serial bus) readers, etc...) Except the keyboard and mouse, then do a test

  Step 2: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, please download the dump on Sky Drive file and share the link with us for analysis

  SkyDrive.live.com

  Available at the location file

  C:\Windows\Minidump\061410-12448-01.dmp

  You might want to know

  How read partial memory dump files that Windows creates for debugging

  http://support.Microsoft.com/kb/315263

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• signature problems

  I have a dell inspiron 530

  I have 2 users on this computer (windows vista)

  whenever I log onto the other user signature says, then right after that it says disconnected by its self, then come back to connect screen

  help please?

  Hey Meth,

   
  Your question does contain all of the required information. Please provide us with the following information.
  1. what happened before the problem occurred?
  2. If there are changes with the hardware or software?
   
  You can follow the steps mentioned in the link below to fix the issue:
  http://support.Microsoft.com/kb/929825
   
  Warning: Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
   
  May want to back up the registry before you try the procedure described in the above link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry