keyacc32 using way too much CPU

Similar Questions

• audiodg.exe using WAYYY too much CPU...

  A few days ago, I was using my computer as usual, and I noticed that my laptop was running slower than it normally does. I tried to watch several YouTube videos and the video played very choppy and generally slow. I am writing this, this problem is solved, but at the opening of the resources on my laptop monitor, I noticed that 'audiodg.exe' used about 65% of my CPU! When I didn't have any big program running, so I immediately set to find out what it was, only to discover he had something to do with my audio. I have no idea why it uses so much CPU, before that I didn't even know it existed because I have not had any problems with him. I tried several other solutions to this and nothing helped. And so, here I post this question: "Why use so much CPU"audiodg.exe"on my laptop, and what I can do to stop it?

  [Already solved the problem myself to restore the system to an earlier date]

  Hi iFrankie2009,

  ·        Brief us the steps you tried to solve the problem.

  Start your computer in aclean boot and check if the problem still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135 if the problem not you can continue with step 2 from the link above. Make sure you reset the computer in normal mode in step 7

  You can also check out the link below:http://social.answers.microsoft.com/Forums/en-US/w7music/thread/d2202857-0a63-4aa4-a278-2e97e6377bee

  Ways to improve performance: http://windowshelp.microsoft.com/Windows/en-US/help/95f70af6-edd6-4f2f-9f02-7d6bdf0190611033.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to stop sharing folder Windows Media Player executable because it uses too much CPU?

  How can I disable the network share (wmp.share) because he is constantly using too much CPU? Any help will be greatly appreciated!

  Hello
  • This happens while Windows running media player?
  • What were the changes made before the problem occurred?
  You can view these methods:
  Method 1:
  I recommend you perform the clean boot.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:
  I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists.

   
  Method 3:
   
  Ways to improve your computer's performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• Explorer.exe uses too much CPU

  My explorer.exe uses too much CPU (almost 100%). Then an error message appears-

  Microsoft Visual C++ Runtime Library

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.
  If I click on OK, or simply close the dialog box explorer.exe ends and restarts. After awhile, it starts to use full CPU again, and the same dialog box appears again. I have installed new software and tried almost every other way, this forum as restart explorer.exe etc...
  Help, please

  Hello Rahul,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that explorer.exe is using too many CPU resources. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  To resolve this issue, let us try these methods:

  Method 1.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  You can run the system maintenance Troubleshooter and check.

  Open the troubleshooting of System Maintenance Utility: http://windows.microsoft.com/en-us/windows7/open-the-system-maintenance-troubleshooter

  See these articles for more information.

  Ways to improve your computer's performance: http://windows.microsoft.com/en-us/windows7/ways-to-improve-your-computers-performance

  Optimize Windows 7 for better performance: http://windows.microsoft.com/en-us/windows7/optimize-windows-7-for-better-performance

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• I can't watch Flash videos because Firefox uses too much CPU.

  Firefox has become untenable because it uses too much CPU and disrupts the Flash videos.

  I tried to disable or change the values of the plugins. Install older versions. Nothing helps. It just sucks. Makes me want to get out the lungs of someone.

  Updated to Firefox 8.0.1 - http://www.mozilla.com/en-US/firefox/

• Using too much CPU only when loading the network

  When FF works closely with the network (wired or wireless) card for access to the network, CPU utilization spikes in way more than 70% and he stayed there until the page loading process finishes web.
  After the upload is complete, the CPU usage remains somewhere between 5-10%.

  When I look at clips youtube 1080 p, where FF is duty next buffer part of this clip I watch, new CPU use peaks above 70% with the flash plugin and gives a total of a 100% of cpu for a few moments and use which make this clip to stop playing or to frame bad times, and ties.

  I have been activated in about: config webgl acceleration to activate the force and that much improve the initial problem, then I activated gfx.direct2D - activated force and also to improve the problem remaining.
  I also disable the safe_mode parameter file adobe flash config protectedmode = 0.

  I have to mention that the initial problem was way to bad ... 
  

  Now I get to point when I don't know what to do so that FF does not use much CPU loading pages.
  As you can see I use to publish this version of Nightly 64 bit (I think it's the 64-bit version...) which is much more better and I would like to read youtube 1080 p clip normally, after that I have wait a few moments to buffer, before starting to play.
  Version 32 bit FF won't let me watch YouTube without framing hurt when the clip is buffered.

  I was monitoring the Task Manager and all the processes listed... and there, I can't blame antivirus or firewall to the peaks of the processor. Also if I do the rest of the network traffic, as well as inside the network custom CPU even file copy flinch.

  Can someone help or give an opinion on what setting to do, so I can eliminate these spikes?

  Thanks in advance!

  Problem solved partially:

  I have observed that the CPU spikes occur not only while I use FF or mozilla nightly, but on all web browsers (Chrome, IE, Opera, etc) that I have used, while these browsers accessing the network.

  Uninstalling the firewall of the solution of the AV portion has helped a lot and by also disabling the bed in the firewall solution of W7, but for long term use, this isn't the right answer (for my at least). Without any firewall FF work or installed works like a charm, while the CPU usage is increased at a decent level of 50% max (total tasks and running services)!

  Anyway, as I said earlier, my pc without any firewall operation is not a good think to do, so I'll replace my computer with a faster, or I'm going to overclock it at a level that zapping INTERNET and navigation will not infringe too much on the performance of the system, or... I live whit it and I accept the limitations...

  Perhaps, in the development of the FF, programmers will keep in mind that not everyone on this planet has powerful processors - and... give a few options... to decrease the CPU at acceptable levels, event, even if they use the firewall solutions that violate on the CPU while FF is buffering of data across the network.

  I should also mention that Mozilla nightly (64-bit) and FF, are always better then IE - in my opinion - which is.

• Photosmart 5510 "disabled" related "to the use of too much power.

  Printer worked fine. All of a sudden when I turn on the printer, I get an error message indicating that a device has been disabled because it used too much power to the computer via the USB port. I receive a message within printing itself was to say that the printer is offline or not connected, but it is connected properly as it always.

  I restarted the iMac (10.7.5), uninstalled/reinstalled the printer software, disconnected/reconnected the cables, tried other USB ports... done everything I can think of. The message I get on the "device" does not specify which device, but I get the error message whenever I push the button 'on' on the printer.

  I don't have a wireless so that is not involved. It seems that the printer is permanently "disabled" due to too draw on the Mac? Never heard of this and they need to fix it!

  When you try to setup assistant to reinstall the printer is not recognized, even though I know that it is properly connected and turned on.

  Any help very graciously agreed. Thank you.

  Hi Katecrimson,

  I understand that you use a Photosmart 5510 with an iMac and you get an error indicating that a USB device drew too much power of the computer, so it has been disabled. I will certainly do my best to help you solve this problem!

  What you have described, and what I could find online, it seems like it might be a problem with the USB cable. I would recommend that acquire you another cable to the printer and try this. I would recommend that once you say USB cable, disconnect whatever it is what USB connected to your iMac, it reboot and then proceed to connect all the devices back, leaving the printer until the last. With a new thread, you must run is no longer in this error.

  Hope this helps, have a nice day!

• Can not find AcerCloud customer to remove. It uses too much CPU and I even do not use.

  HI, I'm trying so my hand on streaming and running programs is fine on my cpu and is not more than 70%. However, I noticed that AcerCloud Client (32-bit) sometimes decides to examine the CPU usage, often maing my CPU 100% usage and I even do not use.  Normally I would not have noticed but my streaming (OBS) software crashes and disconnects me when the CPU usage becomes too high and it's really frustrating, especially since I don't even use the program.

  I picked it out, but in my list of programs he isn't here.  I removed Acer portal because I thought it was her.

  Where is AcerCloud customer?  I want to remove it since its origin a nuisance and I'm not using it anyway.  I win 10.  Help, please

  Hello

  Try to remove all the software listed on this page. With them, you can also remove the acer clouds.

  Also try to navigate to C:\Program cloud\ Acer and see if you find one kind configuration here which could allow you to uninstall. Also, if you don't find anything, try the Program Files (x 86) folder.

• Safari using too much CPU!

  Hi, if you are using safari, my use of CPU spikes upward. My mac starts to heat. Help would be appreciated.

  Facebook is apparently the troublemaker. But apart from that you seem to be running a very old beta version of El Capitan. Solve this first in past in Recovery Mode and reinstall OS x: https://support.apple.com/en-us/HT201314

  (Make sure you have a backup of your drive.)

• artifacts when you drag windows/windows Explorer by using too much cpu capacity

  Dragging a window (not just browser windows) leaves a trail of white on the screen.  Closing any window is slow; Obviously the window collapses down before disappearing.  Manager Windows taskbar shows explorer.exe using amany as capacity 50% of CPU when this happens.  This always happens.  It started when I installed IE8.

  What is happening on three different machines.  They're all running XP, one is a laptop computer to dual boot with Windows 7 as the other BONES; the problem is not there when it is started on Windows7, but are there in XP.  All machines run at 3 Mhz or faster, bicoeur have all 4 GB of ram or more; the smaller hard drive is 640 GB.  We have integrated graphics card Intel; We have a discreet ATI video card; We have a discreet NVidia video card.  They are all updated on the drivers.  All the MS applicable updates are installed.

  The problem disappears if I uninstall IE8; reappears when I reinstall.

  Thank you

  Wrily2

  Hello

  I have the latest drivers installed on all three machines.  I still have the problem.

  I went to visit a friend, installed IE8 on XP Pro machine and had the same problem.

  I visited another friend, verified that they already have IE8 on their two XP machines. No machine to had the problem!

  It took me two more days to spot the difference.  Machines to display the icons of countertop is not a problem, but if you uncheck the display icons on the desktop and have desktop background image (especially an image high resolution) in the stretch mode the problem surfaces.

  I found a solution to the problem.  I resized the image I used to match the resolution of the screen (three monitors, three sizes).  It seems to work even by hiding my icons and let the computer decide how best to run.

  I would like to hear if anyone can check out what I found.  I have explained the apparent conflict.

  Thank you

  Wrily2

• Svchost.exe using too much cpu!

  I have a Windows 2003 Media operating system, svchost.exe occupies almost all my cpu.  I tried to download the update, but I already have service pack 3.  Not sure why this problem arises now because it seems to be a problem that Microsoft fixed in 2007.  Help, please! I read that there is an agent 3 or something like that which solves the problem. What happens if anything do I need to download.  I will also try to see if the problem pops up in safe mode.  I'll look to see where the svchost is still running.

  Download and run the "Process Monitor" freeware.  It's a task manager on steroids.  Find the svchost that uses all CPUS and place your cursor over the name of "svchose.exe".  A pop-up window displays all the services covered by it.  Go to the Services (start-> Run-> 'services.msc') screen, check for these services, and by a stop or pause these services while monitoring your CPU usage.  You should find it pretty quickly.

  Process Monitor: <> http://technet.microsoft.com/en-us/sysinternals/bb896645 >

  HTH,
  JW

• sppsvc.exe uses too much CPU resources__

  Constantly on my computer, I started to feel a downturn. When look in the Task Manager, I saw all the processor used 100% of sppsvc.exe. How can I resolve this situation, I met.
  
  My computer properties;

  Dell Precision M65 (laptop)

  Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
  
  CPU: Intel Core 2 T7400 2.2 GHz
  RAM: 2 GB of RAM (Running dual channel)
  VGA: NVIDIA Quadro FX350 M (512 MB) (1013 MB on Win7)
  HARD disk: 120 GB 7200 RPM (no bad sector and fragmentation)

  All my drivers and bios update.

  Hello F471H,

  Thanks for posting on the Microsoft answers Forums.

  Check out my sticky and try the steps in optimizing windows 7 for better performance.  Try to run the troubleshooters, check for performance issues.  Unfortunately, without the error codes, it would be difficult to diagnose your problem.

  I hope that this answer to your questions, if you need further assistance please come back and post, we are more than happy to help you.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Envy 5644: Photo prints using far too much ink.

  I just bought this printer today.  When you print on regular paper, it prints just fine.  When you print pictures, he uses a ridiculous amount of ink so that the paper is still damp several hours later and so stained, is not recognizable.  I use HP photo paper supplied with the printer and the cartridges that came with it.  If I can't get this resolved I'll take back to the store for a refund.

  I'm getting the same problem when Windows 10 printing than printing from my iPad.

  Thank you for taking the time to answer.  I use HP Advanced Photo paper, it came with the printer.  I went through the process of re - load the paper and the verification of the configuration of the printer.  I realized that I had previously inserted the paper upside down, so it was printing on the back of the paper (my previous printer had photo paper loaded in the back, so it was the other way around).  Once corrected, the prints are very good.  Thank you for your help - I am happy that my muppetry has been solved before I took the printer to the store that would have been even more embarrassing.

• Ehshell.exe producing too much CPU, not even under WMC

  I've never run WMC (Windows Media Center), and again, I see this name in the Manager of tasks (ehshell.exe) and produced at least 45% + cpu and eating all my memory.

  My pc;

  Manufacturer: Micro-Star International Co., LTD..

  Processor: Intel (r) Core (TM) 2 Duo CPU Hz T6600 2.20 2.20 Ghz

  Installation of memory (RAM): 4.00 GB (3.25 usable)

  System type: 32-bit operating system

  Pen and touch: touch available with 2 Points of contact

  Any help?

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• iCloud by using too much bandwidth

  Have had slow internet speeds. Access provider has been here many times and came down to say that my iCloud uses too much bandwidth. Is there a way to schedule his only to run overnight or turn it off - my net is so slow - like 2-3 megabytes when it is supposed to be 10

  Your ISP you gives a load of BS, if necessary, change ISPS.