keyboard Bluetooth connects then pairs installs the drivers, then disappears

Similar Questions

• BootCamp + Windows 8.1 and Windows 10: trackpad and keyboard bluetooth always unsuccessful pairing

  My computer is a model of end 2011 of 13-inch MacBook Pro. I use an external 27 "monitor and bluetooth trackpad and keyboard. Until the last week of July, 2016 that I used with Windows 8 with BootCamp 5, nicely. Then I got a message that Windows 8 would be not updated for critical and security updates. I decided to upgrade to 8.1 Windows but the trackpad wireless works intermittently, and the wireless keyboard is not working at all. I get a message to pair, but the pairing is always unsuccessful. Then I upgraded to Windows 10 and the same problems with wireless keyboard and trackpad.

  Does anyone have a solution? Thank you

  You can try this. UN-pair external Apple Trackpad and keyboard on the side OSX, pair it with test first, and then pair on the side Windows OSX.

• Windows XP automatically installs the drivers at startup; never ends

  So my dad the help of Windows XP, and it has a problem.

  When he start the PC, it will not just go on the desktop, but instead, it shows a screen with "installation of drivers. Please wait. "on this subject. Yet, when he waited, it just never ends. Please help, thanks.

  Hi, ViviNur,

  Start the computer and start typing the F8 key

  Select Safe Mode

  Once the loading Safe Mode, open a command prompt window

  Press the Windows flag key + R to open the run

  Type CMD

  Press enter

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  Asked may to your installation media if it finds corrupted files.  System File Checker will replace files

  Open window CMD again by following the steps listed above

  Type chkdsk /F /R

  Press enter

  You will receive a message saying that the volume must be locked and you want to monitor during the recovery.  Press y and press enter

  Restart the computer to start the scan

  If there are corrupted files, chkdsk will fix if it can

  When the scan is complete, Windows reloads

  Let us know if you need assistance.

• Bluetooth connected phone can hear the ring and answer, but cannot hear or talk to the other party

  Nokia 710

  Motorola h730 Bluetooth

  Hello

  Since the issue is with Unit equipment, I suggest you contact the respective support.

  Motorola support: https://Motorola-global-portal.custhelp.com/app/product_page/FAQs/p/1422, 2690,7687

  Nokia support: http://www.Nokia.com/us-en/support/contact/

  Hope this information is useful.

• Windows 8 on PC Toshiba laptop installs the drivers, but will not print on printer J4680 via USB

  Install windows on a Toshiba laptop 8. Installed the drivers for a printer Deskjet J4680 0n LPT1 through a usb cable.  Install looks like it is complete and presented in the material, but not in Word 2010.  In settings displays error. Don't know where to look for error, no code.

  KCC

  Suggest that you only contact HP.  We do not support hardware and software from Microsoft.

• Bluetooth connection for Nokia phone as a modem disappears after a few connections requiring a reinstall

  Hardware: Acer Aspire Timeline 1810, Nokia 6700

  OS: Windows 7 64-bit

  Pilot bluetooth Microsoft 6.1.7600.16385 (controlled for update, this is the last version June 21, 2006)

  ------------------------------------------------------------------------

  Problem:

  Laptop can see the phone via bluetooth and pair a connection. Subsequently I can Bluetooth icon > click > join a personal area network > click the phone icon > then connect to the internet via the phone.

  After several connections/disconnections, it is not possible to connect to the internet via the phone as Bluetooth icon > right-click > join a personal area network > no phone icon.

  However Bluetooth icon > right-click > show bluetooth devices > current phone icon.

  All I can do is to uninstall the phone as a bluetooth device, then reinstall. I have done that so many times, I'm now up to COM32 and COM34.

  Then, it seems an inherent instability in the bluetooth driver? I've encountered similar problems, even worse, with Nokia E66 and Blackberry 9700 (neither of which Windows could connect to establish an internet connection).

  ---------------------------------------------------------------------

  Technical information:

  Nokia 6700 classic properties > hardware > Standard modem over bluetooth link #2 > properties > (RFCOMM Protocol TDI) > status > device works correctly.

  Bluetooth icon > show bluetooth devices > nokia 6700 icon > click the icon > an error occurred during initialization of this operation. Try restarting your computer or device (don't restart two makes no difference) (by the way when the phone appears under personal space connection > This error message may appear, but it is still possible to connect)

  Phone and Modem window > modems > lists according to:

  Standard modem - COM32

  Standard modem over a bluetooth link - not attached

  Standard modem via a bluetooth #2 - COM15 link

  Standard modem via a bluetooth #5 link - absent

  Standard modem over link bluetooh #6 - COM34

  ------------------------------

  All the solutions to this problem?

  Thank you.

  Hello qwertyyuiop,

  1. have you set up the Bluetooth modem to connect via phone?

  2. have you got the correct settings from your mobile service provider to connect to the switched network?

  There are several settings that you need to set up using your Bluetooth modem. You can get these settings by calling your service provider. They will be able to help you configure the modem.

  Or the best way to connect a phone Nokia would be using Nokia PC suite. Personally, I connect my laptop with the phone. I had several problems when you try to connect by configuring modem Bluetooth as the connection used to move frequently.

  I suggest to install Nokia PC Suite on your computer which would have received you on a CD with our phone. This will give an option to connect to the network and automatically configures the modem. You can also download the software suite the link below:

  http://Europe.Nokia.com/support/download-software/PC-suites

  DISCLAIMER OF THIRD PARTY SOFTWARE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard for Smartphones blackBerry "highlight" in the process of disappearance.

  I had this problem. When I use the keyboard, the blue "highlight" when selecting what letter I want to type light for a split second, then either disappears as I'm not touching it, or it will show something completely different, the path through the keyboard. I did the battery several times pull, and it does nothing. I also did a full cleaning of the phone and it does nothing, the problem persists. Now, I am the owner of a faithful storm, but this phone is my 5th replacement, and my 4th replacement also had this problem, that is why I got it.
  I want to stay loyal owner of a storm, but I'm starting to become owner of a disgruntled thunderstorm. Help? Thank you very much.

  Using the Blackberry Storm 9350
  Verizon Wireless 3G
  OS 4.7.0.148
  It is the official OS, is not a leak.

  Help is greatly appreciated!

  I put them

  TI - 300
  HP - 600
  SS - 3
  KR - Normal

  I'll text a bunch of people and see if it happens again.

• Satellite U400 - cannot bluetooth speaker pair using the Toshiba BT stack

  Dear all,

  I would be very happy to help / advice you can offer the following.

  I have a U400 I got about 10 months ago.
  The built-in laptop bluetooth that I keep all the drivers up to date via the toshiba tempro tool.
  Last night, I got a bluetooth (Gear4 blackbox) speaker that I thought would be easy to pair it with bluetooth. This speaker uses the A2DP.

  -The wizzard "Add new connection" found the speakers but could not perform a pairing no matter how many times I tried.
  This could be due to my existing drivers are not currently supporting A2DP? I'm already using a bluetooth mouse without any problems

  -Try to solve this problem, I downloaded the latest Toshiba Bluetooth Stack (Version 6.40.02) and I tried to install. I have not tried unistalling anything until this... I just run the installation. This has got to a point and got stuck trying to install the bluetooth file transfer. I had to cancel and then use system restore to get back to where I started. Should I unistall existing bluetooth before installing the battery Bluetooth Toshiba? What should I do?

  -Toshiba laptop computers come with Toshiba Bluetooth Stack already installed?

  I am really grateful for any help and advice

  Thank you very much

  John

  Hello
  > Toshiba computers laptops come with Toshiba Bluetooth Stack already installed?
  Of course!
  All laptops that are equipped with internal BT module have a preinstalled BT stack!

  But to be able to use Bluetooth, enable it first using the FN + F8 key combination

  This key combination allows the Wlan and BT, so be sure you have chosen the BT and not Wlan ;)

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• AppleTV has been paired with the keyboard but now won't do

  My keyboard (mod-A1314) was paired with the AppleTV, I do not use it for a few months and now it won't pair anymore. The Bluetooth shows just the rotation of the pinion turns but never stops. I changed the batteries in the keyboard, but nothing helped.

  What can I do to make this work?

  check that the keyboard still works by connecting to another device, if the device works then reset the Apple TV and the device software update

  Restore your Apple TV to its factory settings - Apple Support

  Update the software on your Apple TV - Apple Support

• Headset Bluetooth connected to the PC, but has stopped working.

  I recently bought a Bluetooth hands-free headset, with the intention to use it for my PC and Playstation 3. It took me a while to find a way to connect it correctly, but I managed to put in place and both the speaker and the microphone worked perfectly. However, when I moved my Bluetooth adapter to another USB port and reconnected my headphones, the speaker has stopped working. It was not broken, because he was still working on my PS3, but it did not play all the sounds from my computer. I would go to control panel > sound and I would be with the right button of the headset and click 'test', it would have displayed on my screen as if he were playing, but no sound came through the speaker. The microphone was still working, and I don't really use the speaker, so I didn't really like. However, I recently connected an controller to my PC as a game controller, and I installed the wrong drivers while my card is always connected. I uninstalled the drivers and later installed good, Bluetooth had stopped working on my PC, so I rebooted, plugged the adapter in, active Bluetooth etc, and I was able to reconnect my helmet. However, now the microphone has stopped working as well. I tried to use "Microsoft Fix It", and when I would try to help out the speaker or microphone, he told me to turn on my camera, then it is already enabled, and I wouldn't be able to do anything.

  Hi sexualharrasmentpanda,

  Please see the post below with a similar problem and fix possible:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2fdc6964-78f6-468F-98c2-a1a9c7ffadce

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Where to find the drivers for my HP printer?

  I'm unable to connect my H - P printer to the computer. As I followed the procedures described in the manual and the disk. I have fine until where I am asked to connect the USB cable from the printer to the computer. He said that it installs the drivers, then after a minute, he says that the drivers have been installed in vain. What gives.

  Hello

  You must check with HP, their drivers support and documentation online and ask in their forums
  on the problems known.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to install all the drivers that I need for my dell inspiron 1525 when I can't get on the internet?

  I have a dell inspiron 1525 with windows xp sp 2 on it and I had to wipe and reinstall xp on it b/c I got the BSOD. Now, I can not configure a network connection, or get all the drivers that I need and I can't go on the internet. Is it possible to use another computer to get the drivers I need for this? Do you need a specific driver to even set up a network connection?

  AngelaGraves,

  The drivers you need are on your disk drivers that came with your computer.

  Here's the order of installation of the drivers. How to download and install drivers in the correct order

  If you do not have the drivers disk, you can download the drivers from Dell drivers & downloads, then copy on a USB key or drive and install from there.

  Rick

• OfficeJet 100 Mobile Bluetooth connection

  Hello

  I plugged the printer Officejet 100 to my Mac, and it works perfectly if it is connected via a USB connection. However, I can not print if I try to use the Bluetooth connection. My computer recognizes the printer and it shows as connected but when I send a document, the printer queue indicates that the printer is not connected.

  I'm using the latest drivers and my Mac running OS X, the latest version 10.8.4.

  Any help is appreciated!

  Thank you very much in advance,

  Sergio.

  I figured out how to solve this problem, and I write it here in case it helps someone else.

  Despite the fact that a printer, it seems that I had to install the same printer twice: once (1 printer) for the USB connection and once again (printer 2) for the Bluetooth connection. It's the same device (only one printer) but because it connects to the computer in two different ways, the computer treats as two separatedly ones - or at least that's how I interpret it. The printer which connects via Bluetooth is the only appears under devices Blutooth. And, it works!

• Get a PhotoSmart C5580 to work with a Bluetooth connection in Windows 8

  I have a PhotoSmart C5580 for several years.  It was working fine with my old laptop running Windows 7 with USB and Bluetooth.  My new laptop has 8 64-bit Windows and the USB connection works fine, but I can't get the Bluetooth connection to work for the life of me.  The old laptop needed a USB Bluetooth adapter, but the new laptop has Bluetooth built in.

  I'm pretty tech savvy and searched through various online and tried the HP Installation Wizard help documents, but they speak mainly on USB and wireless and not on Bluetooth technology.  The Panel has USB and BT printers installed.  BT is currently marked as default printer.  The BT menu on the printer is marked to be visible, and BT options on the computer seem far too, because the computer totally see the BT printer.  The list of Windows 8 devices (two BT and otherwise) lists currently both the USB printer, which according to her, is cause of disconnected the USB cable is disconnected in fact and not the BT printer, he's talking about.

  Whenever I have remove the BT printer and add it again, the HP software/driver installs again and says it's successful (even if the driver for the USB connection and the software are already installed and work very well).

  The only problem is that the HP Solution Center indicates that the BT printer is disconnected.  It really tells me nothing more than that.  It's the same message that my old laptop would give me if I didn't have the USB Bluetooth adapter plugged in, but here the BT is built, and the computer says it is on and working very well.  So I'm a little confused at this point.  Any help anyone can offer would be greatly appreciated.  Thank you!

  I am delighted to hear that, and I'll pass that along our engineers so that they do not worry. I didn't even really think, but if you leave the USB cord is plugged it will disable the BT adapter in the machine - which could cause prints of BT to fail but not USB prints.

  Have a wonderful day!