Windows XP automatically installs the drivers at startup; never ends

Similar Questions

• Setting Windows 8 to automatically update the drivers for your hardware

  Windows 8 includes drivers for many devices, including your HP printer. You must have the latest drivers installed to make sure that your hardware is working properly. This video will show you how to set Windows 8 to keep the drivers up to date automatically.

  Hope you find the video above useful with your new Windows operating system!

• Windows 7 cannot install the drivers for my USB devices.

  Whenever I have connect my USB devices, windows is now impossible to install the unit. It shows the driver installation icon in the notification area and finally said failed. Devices are displayed in Device Manager with an exclamation mark in it. When I try to manually install the driver, it gives a prompt with error message "Windows found driver software for your device, but has encountered an error trying to install it." . The system cannot find the specified file. No idea why?

  Hi Halley,

  Have you tried another USB port?

  Please follow the steps to solve the problem USB drivers.

  Check the status of the USB in Device Manager:

  a. go to Control Panel - Device Manager.

  b. If you see a yellow exclamation mark next to the device, the driver is disabled and must be updated.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Reinstall the USB controller:

  a. click Start, click run, and type devmgmt.msc.

  b. expand USB controllers

  c. right-click on each USB drivers and select uninstall

  d. restart the computer and Windows will automatically reinstall the USB controllers.

  Reference article

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  For more information:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• keyboard Bluetooth connects then pairs installs the drivers, then disappears

  Bluetooth keyboard worked fine under vista. After a new reinstall of vista bluetooth keyboard connects and then pairs installs the drivers, then about 15-20 seconds disappears. No error wouldn't come again several times the same thing. Obviousily the fault lies within vista because everything that he has been fully functional until I reinstalled vista.

  Hi reda,.

  Thanks for posting your question in the Microsoft Community forum. I understand that you are facing a problem with the Bluetooth keyboard after a reinstall of Windows Vista. I guess this must be difficult for you. I would like to help solve you the problem.

  Before troubleshooting, provide us with information.

  1. What is the brand and model of the Bluetooth keyboard?

  2. have you updated to Service Pack 2 installed?

  3. have you installed all necessary drivers after the re-installation of Windows Vista?

  To resolve this issue, let us try these methods:

  Method 1.

  I suggest you to follow the steps in this article and check the status.

  The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2.

  You can also follow this link and check if that helps.

  Resolve failure of mouse or a Bluetooth keyboard to function: http://support.microsoft.com/kb/811798

  Refer to this article.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Install Windows 8 automatically formats the hard drive? If this isn't the case, I should format it FAT or NTFS drive before installing Win/8?

  Install Windows 8 automatically formats the hard drive?  If this isn't the case, I should format it FAT or NTFS drive before installing Win/8?

  No, this isn't format the hard drive, what's done is put your existing version of Windows in a folder called "windows.old", it indeed erases old files of version and folders, leaving free space on the existing partition "NTFS" (formerly ocupied by your previous version of windows) in which is installed Windows 8.

  And "NTFS" is the only file system that supports Windows 8.

  J W Stuart: http://www.pagestart.com

• Updated Windows kb3087916 [August] installs the DEBUG version of the Flash ActiveX in IE11 on 8.1 Windows systems (32-bit).

  Kb3087916 Windows Update [August] installs the DEBUG version of the Flash ActiveX in IE11 on 8.1 Windows systems (32 bit).  This version generates ActionScript errors.

  It may (or may not) do under other configurations (e.g. 64-bit?  Windows 10?) -I don't know.

  Uninstallation of the update is NOT the solution: Tit Windows Update itself must be fixed!

  The problem has been resolved by the release of kb3089023

  https://support.Microsoft.com/en-us/KB/3089023

  If you run Windows updates, it should find it now.

• How to configure Windows 7 to automatically install the drivers, mine is set to never install drivers.

  Ineed to install an audio driver, when I go to do this, I get a message that says my computer / Win 7 is configured to never install drivers. How to change that?

  You don't want to automatically install drivers from Windows Update or another source.

  If you want to update the drivers, do it manually and get them directly from the device manufacturer websites.

  Do NOT use the finders of pilot no more...

• Windows 8 on PC Toshiba laptop installs the drivers, but will not print on printer J4680 via USB

  Install windows on a Toshiba laptop 8. Installed the drivers for a printer Deskjet J4680 0n LPT1 through a usb cable.  Install looks like it is complete and presented in the material, but not in Word 2010.  In settings displays error. Don't know where to look for error, no code.

  KCC

  Suggest that you only contact HP.  We do not support hardware and software from Microsoft.

• Black screen with cursor when connecting Windows 7. Reinstall the drivers doesn't help not.

  I have a Windows 7 Pro machine that boots to a black screen with a cursor instead of the login prompt, but if I press some keys like enter and tab that I will get a few blue squares where probably windows are appearing.

  I can boot into safe mode and log in. I can then disable or uninstall the video card and the boot into normal windows. But if I install the Intel to the HD3000 integrated video drivers, the black screen will be there waiting for me when I reboot.

  I tried with and without external monitors connected.

  I tried to uninstall the drivers in the menu programs and features (also selection to completely remove the drivers), and I uninstalled them through Device Manager. I then reboot before installing the Intel drivers again. I tried the version on the site Web of Panasonic, as well as the latest version of the Intel Web site. Results have been the same every time.

  Are there left behind somewhere that I could try to remove registry keys? Perhaps a more thorough removal method? Something more creative? All ideas welcome!

  System Specs:

  Panasonic Toughbook CF53 (A)

  Windows 7 Pro 32 bit

  Intel CPU 2520 M w / HD 3000 integrated video

  4 GB OF RAM

  This system has been restored to a standard corporate image, unfortunately is no longer near factory that she'll get. System Restore will not be an option because he has never been in a working state. Startup Repair was not an option due to disk full corporate encryption that seems to make the unreadable disk at this time here. I tried but it fails and I can't find the drivers to be used in the environment of recovery for this BeCrypt Disk Encryption.

  Hi Brian,.

  According to the information that you, as you can start your computer in safe mode without problem, then the problem is probably with the supplied driver. Since the installation of the driver is causing the problem to occur, one possible cause is a driver you want to install is not compatible with the system. We suggest that you contact the manufacturer of your computer for help on installing the correct driver for your PC.

  Kind regards.

• When you open a new window, it automatically loads the last content pop up (?) and I'm unable to type in the address bar or open a new tab in the new window.

  I don't know if they are technically pop-up windows (for example, if you perform a search on kayak.com, it will automatically open a new window of priceline.com with the search results), but that happens with Blocker on or off. Other examples are a little info to a financial site window or .edu, which opens a session is about to expire, or answer a FAQ (with the exception of the priceline example, these windows have an address bar or view a URL). In any case, once these windows are closed, if I try to open a new window, it will automatically load the content of this "pop-up". Whenever he does, I'm unable to type in the address bar or open a new tab in this window.

  How can I fix it? What I want is to open a new window which is empty, not load the previous contents.

  No, I just realized that I was holding Command-Shift-N rather than command-N

• Buy Windows 7 with all the drivers?

  Is it possible to purchase Windows 7 at Toshiba with all the drivers of Toshiba laptop for some?

  Hello

  I think you mean a Toshiba Recovery disk that already contains all drivers for your laptop. Is this good?

  Well, I put t know what laptop, you have exactly, but you can order a preinstalled with OS recovery disk from Toshiba. If your computer laptop wasn t comes with Windows 7, you can order such a recovery disk.

  Anyway, but you can get all the drivers here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• How change windows and not lose the drivers and programs?

  Hey guys want to just ask,

  I acres, I bought it with windows 7 Home premium installed but I bought windows 7 ultimate and I want to change the windows, but the only thing that I'm worried about is when I format the HHD of re - install windows ill lose programs Acre, how can I keep after I re - install windows?

  Is it possible that I can get a copy on USB or something?

  Thank you

  Your laptop must have a backup or restore utility to create the restore disks - in general, the options are to create a set of disks that are going to do a full factory restore and a disc is just the drivers and the software.

  Click on the start menu, then all programs and see if there is an Acer folder that contains this utility.  If she is not there, your next option would be to go here, look to the top of your system, and then click tab to download the manual and see if there are instructions for creating a backup.

• Windows 7 ultimate with the update problem/startup problem

  Hello

  I did the following:

  every day my hp Pavilion dv5-1150us has automatically reboot the system, but it does not start unless I run recovery system run.

  Windows Update can not run properly.

  My computer installed vista. then I switch to 7 ultimate.

  I would like to solve this problem. Is there anyone can help me?

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.

  Full check of 100%.

  Windows resource protection found corrupt files but was unable to solve some of them.

  Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example

  C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32 >

  Have you looked into the logfile @ C:\Windows\Logs\CBS\CBS.log?  So the scannow to quit smoking, must be completed properly.  If this does not help, try to run a scan of the hard drive by using "chkdsk/r" @ the command prompt.

• Windows Vista automatically locks the computer.

  I have a Dell Inspiron E1505 with Windows Vista business with service pack 2 installed and kept up-to-date. I noticed that, after a few minutes of inactivity on my computer, Windows locks automatically the computer. By that I mean it will act as if I had pressed the "lock" button and return to the sign in the display. I am running Norton 360 antivirus program and have in the past to run Mcafee. Does anyone know why the event occurred, or particularly how to solve this problem, because it has become more than a nuisance.
  Thank you.

  Try this:

  http://help.ISU.edu/index.php?action=FAQ&CATID=79&docid=396

  Problem:

  Windows returns to the login screen of the screen saver. How can I change this?

  Solution:

  Windows Vista

  1. Right-click on any empty space on the desktop and select personalize.
  2. Click on screen saver.
  3. Uncheck the box on the resume, the logon screen .
  4. Click OK.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 update installs the graphic driver badly.

  I have a Dell Optiplex desktop with a graphics chipset from Intel 4.  When windows performs an update, it replaces the last reference dell with (8.15.10.2869) driver that does not support the native resolution (1680 x 1050) of the monitor (Dell P2210).  I need to remove the driver and replace it with the dell driver.  What is strange, is that the dell driver is the same as that installed by the update from microsoft.  It's just that the option 1680 x 1050 does not appear in the version of microsoft.  I tried to disable the update, but microsoft is so vague in his descriptions of his updates I had a hard time finding change makes the graphics driver.  I'm tempted to turn off updates all together.  Any suggestions?

  I have a Dell Optiplex desktop with a graphics chipset from Intel 4.  When windows performs an update, it replaces the last reference dell with (8.15.10.2869) driver that does not support the native resolution (1680 x 1050) of the monitor (Dell P2210).  I need to remove the driver and replace it with the dell driver.  What is strange, is that the dell driver is the same as that installed by the update from microsoft.  It's just that the option 1680 x 1050 does not appear in the version of microsoft.  I tried to disable the update, but microsoft is so vague in his descriptions of his updates I had a hard time finding change makes the graphics driver.  I'm tempted to turn off updates all together.  Any suggestions?

  When an update is displayed on the Windows Update page, in the right hand pane is "more information." Click on that and it will give you a pretty good indication of what the update is on. If it has something to do with the graphics, I hide the update and stick with the pilot of the manufacture.  I hope that helps you understand your problem.