Keyboard cannot follow. Making misspellings all the time.
Hi, im having trouble with typing. My keyboard seems to not be able to follow along with me. Now, I can't type that fast, but it seems I have to type really slow for the letters out, and even in this case do not come i type letters. I always keep backspacing to correct. It is not no matter what specific keys, they all do. I tried to clean with air boxes but doesn't help at all. It's a HP Pavilion laptop, on the back, it says Tx1000 and also REPLACEMENT-Q22C, do not know if not more is a model number. Its has a Turon64x2 AMD and windows vista, its about two years old. I have never had any problems with it other than the problem of typing and it has been for about a year already. Now, it does on applications, that is to say, Word, anywhere that I can type it does. Someone please help.
It took me 10 minutes to type up to when he should take me 2 minutes... just an example of how it's bring me. Thanks in advance
Check the behavior in safe mode, with a clean boot, or with adifferent user account. Try to use the technique of the boot in order to identify some software that can contribute to the behavior you are reporting.
Tags: Windows
Similar Questions
-
Windows cannot search for updates (all the time of different codes)
I have a system that is used to run windows 7 well. Then I went to windows 10 and had problems after a major update soon after liberation. After that, my system did so, but I ran into issues. As a result, nearly a year later, I decided to try to go back to windows 7 with a completely new reinstall and re-upgrade. My windows 7 will not update and I miss all the tools that I can find as a substitute or a repair or cmd commands. The initial error is coded C80003FA. I did a lot of difficulties which seems to be similar to my questions and the Fix - it tool cannot find convenience stores. I also tried the standalone installer of windows and he found the fix, but could not install. After doing all the patches that seem relatable to me somehow, I now get the error code 8008005. This code came while typing, but other codes appeared as well.
Y at - it suggestions on what I can do or is there a way to help?
Thank you
SYSTEM:
Processor: AMD FX 8350 3.2 GHz
GPU: MSI R9 380 4 games
RAM: AMD 8 GB DDR3 RAM
Hard drive: Seagate 1 TB drive HARD drive
PSU: Corsair CX750
MSI M5A97 EVO Motherboard R2.0
Hi Harry,.
At this point we suggest is that reset you the Windows Update components. To do this, you can consult this article for steps to reset the Windows Update components
Let us know how it goes.
-
Original title: problems cannot do anything
Windows cannot access the specified device, path or file. You can't have__appropriate the permissions to access the item. I get it all the time can not download anything
Hi birdylod,
· What version of the operating system is installed on the computer?
· You did changes to the computer before the show?
· You use Internet Explorer? If so, what version are you using?
· What files you download?
Follow these methods.
Method 1: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
Method 3: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
For reference:
What to know before applying permissions to a file or folder
-
Spooler subsystem app making more than 50% CPU all the time?
Spooler subsystem app making more than 50% CPU all the time?
-------------------
-
Computer is very slow and IE does not work all the time.
I bought a computer from my old employeer. He is doing all sorts of things, or should I say not to do all sorts of things. It is very slow and IE does not work all the time. They have questions arise and ask if the administrator oks things and other things like that. It came with any disks. I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it. Can someone please?
Hello
Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
the former employer to do it for you if necessary.Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
role in this issue. And even the TCP/IP stack might need to be refreshed.What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).If no joy there's something blocking perhaps.
Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK
Close and restart IE or IE with no addons
not better?
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question (toolbars are BHO).
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only.
--------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html--------------------
Departure - in the search box, type-> order
at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN
Type the following commands (or copy and paste one at a time), each followed by pressing on enter.
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
RESET
That resets your TCP/IP stack
--------------------------------
Maybe need of these:
For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
I want that the to-do bar to show all the time
When I use MS Word on my Macbook (OS X El Capitan 10.11.3), and I'm going to full screen by pressing the green button, I do not see the taskbar (the thing that says "file, edit, view," etc.) at the top of the screen. It's a real problem for me because I write in several languages and regularly switch between different keyboards. to change keyboards, you must click an icon in the taskbar. So to move from a keyboard English, German or Spanish when you type in the Word doc, I have to first, click on the green button to make the smallest word doc, change the keyboard by clicking on the change of keyboard icon on the taskbar (that's a flag US for American English) and then click on the green button to make the Word doc full screen. Here are the three steps instead of one. I want to have the taskbar visible even when the Word doc is completely open, or to spend sort button that controls change the keyboard to another location on the screen. Can we do anything? BTW, I'm very new to Mac (always PC user before two weeks ago) so I'm still a little confused.
This is the menu bar. If you use the full screen then you cannot have show all the time.
Just expand the window in the image of the screen and you can display the menu bar.
Also, you don't have to leave it full screen to see the menu bar. Simply move the cursor to the top of the screen.
Or, you can configure a shortcut in the keyboard system preferences to switch between input sources. By default, it was cmd-space, but who has been co-opted by Spotlight. You can set it to what is convenient and not used. Then, you won't have to go in the status menu.
-
Safari crashes all the time without report. Now, nothing happens
Dear people,
I'm on 10.11.2. Latest version of the software. MacBook Pro mid-late 2009. Until today, everything worked like a charm.
And then Safari crashed all of a sudden all the time when I tried to open another tab (~ 5 have been opened)
That's what I did:
-J' all caches emptied
-delete all cookies
-remove all history
-J' disabled all extensions
-J' deleted Cache.db
-J' tried Safari in another account - same problems
-J' deleted all preferences
-J' reinstalled Mac OS X
No luck.
And I get an error report or whatever it is. It keeps crashing.
I need help please!
Hey! Take a look at this. This temporary has helped a number of users here. Over time, everything should be resolved then wait for a while.
A possible solution to the problem of address bar: disable the Safari Suggestions
If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.
https://support.Apple.com/en-us/HT204098
Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'
Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.
Open Safari - Preferences - Privacy - data to remove any Web site.
Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.
Also, try the following steps:
Restart your Mac.
Try to start:
-Stop your Mac
-Wait until your computer turns off and after that press the power button
-Just after you hear the startup tone, press in and hold the SHIFT key
-Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar
-Once your Mac boot, restart dhcpd as you usually do.
-
Why my internet stops now and then not all the time trying to upload links to pdf files
I wonder if there is a problem with my computer or if I need to install a program? My internet stops now and then not all the time trying to upload links to pdf files.
Hello
1. what browser do you use?
2. have you done any hardware changes or software on your computer before this problem?
3. you receive an error message when internet no longer works?
4. what exactly you mean by pdf files download links?
If you use Internet Explorer, you can follow this link:
Tips for solving problems when Internet Explorer hangs or stops working
Reference: Cannot display PDFS on the web
Display PDF files in Internet Explorer, AOL | Acrobat 3D, Acrobat Reader 7 7
Hope the helps of information.
-
Linksys connection shows poor all the time
When I check my status on my connection why you say poor all the time? I also noticed that there are others that are related to my linkskys and my connection is always ' say poor. How can I get a better connection? Thank you
Hello
You really need to be checked in the forums for your version of Windows.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows---------------------------------------
It is more connected to your router that are not in your household? If so, you will need to
reset the router security. All unauthorized connections are the security risks and also use
your connection resource. Check with the manufacturer of the router.Distance and other interference can affect the quality of the connection. Also check updates
your WiFi and NIC drivers.LinkSys has support and excellent help. Also check the LinkSys forums.
LinkSys support
http://homesupport.Cisco.com/en-us/Wireless/LinksysLinkSys forums
http://homecommunity.Cisco.com/community/?category.ID=Linksys==================================================================
References to Vista also apply to Windows 7.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html====================================================
After that the foregoing: (here, the NETWORK card and Wifi are interchangeable in the sense that the two must be
fact that you can do if you first use).Follow these steps:
Control Panel - network - write down of the brand and the model of the Wifi - double click - top
tab of the driver - write version - click on update driver (can't do anything like MS
is far behind the pilots of certification). Then right click on the Wifi/NIC device and UNINSTALL
-Reboot - it will refresh the driver stack.If necessary to download drivers on another machine and transfer on the problem computer via
removable media such as a USB key or CD - DVD.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods
below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
found)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
(Those become your fonts of rescue system manufacturer).Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
7 love the updated drivers.======================================
If necessary:
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html-----------------------------------------------------
Check this box:
Strange problem with Internet in Vista (and Windows 7)
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
-
My very old DELL does not start all the time. And when that happens, it doesn't look very good.
Original title: Please help
I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!
It seems that two things must happen... Three if you don't have good backups (it would be the first thing * if * you have not any outside of the machine.)
(1) the material must be tested. By restarting and pressing the combination of keys at the right time could test the hard/readers/speed control (CTRL + ALT + D, on a dell computer before starting at startup of Windows.) For other tests - Dell probably put on a partition or sent a CD with the machine that allows you to perform a battery of tests on the... video, audio equipment, etc.
(2) a restoration clean install a factory should probably be made * if * hardware testing are in agreement. You could probably clean the machine by following the steps I'll give you - but knowing no more about the problem that we are so far... If that does not better... it's perception, or something so serious, that a clean install is probably the only real 'next step '.
(And if the new facility does not solve it and analysis of material found nothing - that's the perception, or something (material) defective which is not be picked up).
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/Those who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.Defragment
How to defragment your hard drives* will take timeCleaning the components of update on your Windows XP computer
It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
-
The Explorer Microsoft touch limited edition mouse lag all the time and everywhere
Original title: mouse late
I just bought a mouse yesterday, (explore touch limited edition). That is fine, but my problem with this one is the answer developed. from time to time when I try to move, it lags behind which is very irritating.
It happens in games, at the office, everywhere and all the time...
My windows 7 (64-bit) and I have already downloaded and installed the driver recommended but not luck.
any ideas?
Hello
You can perform the following methods and check if it helps.
Method 1: troubleshoot failures in the response to the mouse or wireless keyboard:
http://support.Microsoft.com/kb/838398
Method 2: solve a wireless mouse that does not correctly http://support.Microsoft.com/kb/321122
I suggest you to contact the Microsoft Hardware support for assistance. http://www.Microsoft.com/hardware/en-us/support/contact-us
How to replace Microsoft or hardware, packs software service to order and replace product manuals: http://support.Microsoft.com/kb/326246
-
Apps of cloud crash all the time to gel since the first day after a few minutes of use
Apps of cloud crash all the time to gel since the first day after a few minutes of use.
Without the help of Adobe I tried to use the AdobeCreativeCloudCleanerTool.
In the user guide for AdobeCreativeCloudCleanerTool Adobe says contact us if there are errors in the log after you run this tool and guess what there are errors in the log file, but there is no way to contact the Support from Adobe and to get this other file for them. I've been a customer of creative cloud for months, and use that I got from her was ridiculously low all this lack of reliability. I really miss the days you installed only once a year and maybe fix something and then you were set for a year of cruise with your Adobe products. I am very disappointed, and unless Adobe can help I'll leave Adobe forever because there is no excuse to sell something that does not work and do not provide support at the same time. In a last-ditch attempt to get the resolution and since there is no other way for me to get this log file for Adobe I paste the contents of the log file of the AdobeCreativeCloudCleanerTool here in hope that some support and product engineer will do something about it. Here is the log:
[Mon May 02 18:39:09 2016] -.
[Mon May 02 18:39:09 2016] * = * = * = * = * = * = * = * = *: start Session: * = * = * = * = * = * = * = * = * = *.
[Mon May 02 18:39:09 2016] -.
[Mon May 02 18:39:09 2016] Win OS Version: 6.1
[Mon May 02 18:39:09 2016] The cleaner tool version: 2.0.0.0
[Mon May 02 18:39:09 2016] Source cleaning directory: C:\Program Files (x 86) \Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon May 02 18:39:09 2016] [AdobeProgramFiles]: C:\Program Files (x 86) \Adobe
[Mon May 02 18:39:09 2016] [AdobeProgramFiles_x64]: C:\Program Files\Adobe
[Mon May 02 18:39:09 2016] [AdobeCommon]: C:\Program Files (x 86) \Common Files\Adobe
[Mon May 02 18:39:09 2016] [AdobeCommon_x64]: C:\Program Files\Common Files\Adobe
[Mon May 02 18:39:09 2016] [UserRoamingAppData]: C:\Users\username\AppData\Roaming
[Mon May 02 18:39:09 2016] [UserLocalAppData]: C:\Users\username\AppData\Local
[Mon May 02 18:39:09 2016] [StartMenu]: C:\ProgramData\Microsoft\Windows\Start start\program
[Mon May 02 18:39:09 2016] [System32Folder]: C:\Windows\system32
[Mon May 02 18:39:09 2016] [SharedApplicationData]: C:\ProgramData
[Mon May 02 18:39:12 2016] Language selected: English
[Mon May 02 18:39:12 2016] View the Adobe end user license agreement
License agreement
By using software of Adobe Systems Incorporated or its subsidiaries ("Adobe"); You agree to the following terms and conditions. If you do not agree to these terms and conditions; do not use the software. The terms of an end-user license agreement accompanying a particular software file on the installation or downloading of the software take precedence over the below conditions.
The export and re-export of software products are controlled by the United States Export Administration Regulations and such Adobe software may not be exported or re-exported to Cuba; The Iran; The Iraq; The Libya; The North Korea; Sudan; or Syria or any country to which the United States embargoes goods. In addition; Software Adobe may not be distributed to persons on the Table of Denial Orders; the list of entities; or the list of specially designated nationals.
By downloading or using an Adobe software, you are certifying that you are not a national of Cuba; The Iran; The Iraq; The Libya; The North Korea; Sudan; or Syria or any country to which the United States embargoes goods and that you are not a person on the Table of Denial Orders; the list of entities; or the list of specially designated nationals.
If the software is designed for use with an application (the "Host" Application) software product published by Adobe; Adobe grants you a non-exclusive license to use this software with the host Application only; provided you have a valid license from Adobe for the host Application. Except as described below; This software is allowed to you to the terms and conditions of the Adobe end user license agreement governing your use of the host Application.
DISCLAIMER OF WARRANTY: YOU AGREE THAT ADOBE HAS MADE NO EXPRESS WARRANTY TO YOU REGARDING THE SOFTWARE AND THAT THE SOFTWARE IS SUPPLIED ' AS WHAT ' WITHOUT WARRANTY OF ANY KIND. ADOBE EXCLUDES ALL WARRANTIES RELATING TO THE SOFTWARE; EXPRESS OR IMPLIED; INCLUDING; WITHOUT LIMITATION; ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; MARKET VALUE; MERCHANTABILITY OR NON-VIOLATION OF THIRD PARTY RIGHTS. Some States or jurisdictions do not allow the exclusion of implied warranties; so the limitations above may not affect you.
LIMIT OF LIABILITY: IN NO CASE ADOBE WILL BE HELD RESPONSIBLE TO YOU FOR ANY LOSS OF USE; BUSINESS INTERRUPTION; OR PHYSICAL DAMAGE; INDIRECT; SPECIAL; ACCESSORY; ACCESSORIES OR INDIRECT OF ANY KIND (INCLUDING LOST PROFITS) REGARDLESS OF THE FORM OF THE CONTRACT ACTION. TORT (INCLUDING NEGLIGENCE); PRODUCT OF STRICT LIABILITY OR OTHERWISE; EVEN IF ADOBE HAS BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. Some States or jurisdictions do not allow the exclusion or limitation of incidental or indirect damage; If limitation or exclusion above may not apply to you.
[Mon May 02 18:39:12 2016] Please enter (y) for Yes or n for no.... > >
[Mon May 02 18:39:14 2016] Choose one of the following options to clean:
[Mon May 02 18:39:14 2016] 1 all
[Mon May 02 18:39:14 2016] 2 adobe Flash Player 10.2
[Mon May 02 18:39:14 2016] 3 creative Cloud 2015, 2014 creative cloud, cloud creative & CS6 products
[Mon May 02 18:39:14 2016] 4 creative Cloud 2015 only
[Mon May 02 18:39:14 2016] 5 creative Cloud 2014 only
[Mon May 02 18:39:14 2016] 6 creative cloud only
[Mon May 02 18:39:14 2016] 7 CS6 only
[Mon May 02 18:39:14 2016] 8 CS5 - CS5.5 - CS6
[Mon May 02 18:39:14 2016] 9 CS5 - CS5.5
[Mon May 02 18:39:14 2016] 10. CS3, CS4
[Mon May 02 18:39:14 2016] 11. Adobe Id credentials
[Mon May 02 18:39:14 2016] 12. Fix file host
[Mon May 02 18:39:14 2016] 13. Quit smoking
[Mon May 02 18:39:14 2016] Choice: >
[Mon May 02 18:39:55 2016] Selected by the user: all the
[Mon May 02 18:39:55 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\caps\pdb.db
[Mon May 02 18:39:55 2016] DB does not exist in: C:\Program Files (x 86) \Common Files\Adobe\caps\Media_db.db
[Mon May 02 18:39:55 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\caps\caps.db
[Mon May 02 18:39:55 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\caps\hdpim.db
[Mon May 02 18:39:55 2016] Orphaned session is deleted: adbeadbeadbeadbeadbeadbeadbeadb
[Mon May 02 18:39:55 2016]...
[Mon May 02 18:39:55 2016] Delete entries from the database of the installer
[Mon May 02 18:39:55 2016] Update status tsInstalled to 0 for the removal of 2 for installation in the ribs_collection_paylaod for adbeadbeadbeadbeadbeadbeadbeadb of the session table
[Mon May 02 18:39:55 2016] InstallState update
[Mon May 02 18:39:55 2016] Delete the contents of the product: AdobeColorVideoProfilesCS CS4, Version: 2.0
[Mon May 02 18:39:56 2016] ATTENTION: Payload with ID: {4F3CE025-D60B-4E6B-8D39-B04CD3769008} has no value InstallDir. Deleting the files from the patch (if applicable) cannot happen.
[Mon May 02 18:39:56 2016] Removing the features: {4F3CE025-D60B-4E6B-8D39-B04CD3769008} the ribs_payload table and other tables of the payloads Associates
[Mon May 02 18:39:56 2016] Delete the contents of the product: AdobeColorCommonSetRGB, Version: 2.0
[Mon May 02 18:39:56 2016] ATTENTION: Payload with ID: {AB8E4534-C573-4CC9-BA6A-76DD14055510} has no value InstallDir. Deleting the files from the patch (if applicable) cannot happen.
[Mon May 02 18:39:56 2016] Removing the features: {AB8E4534-C573-4CC9-BA6A-76DD14055510} the ribs_payload table and other tables of the payloads Associates
[Sun May 02 18:39:56 2016] finished the update to installState
[Mon May 02 18:39:56 2016] Deletion of session: adbeadbeadbeadbeadbeadbeadbeadb of ribs_collection and other associates of tables
[Mon May 02 18:39:56 2016] Update schema pcd_meta to 2 caps if the previous version is less than 2
[Mon May 02 18:39:56 2016]...
[Mon May 02 18:39:56 2016] Entries in the database of the installer have been removed
[Mon May 02 18:39:56 2016] Sessions folder will be deleted.
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:39:56 2016]
[Mon May 02 18:39:56 2016]
[Mon May 02 18:39:56 2016] HD database session is valid
[Mon May 02 18:39:56 2016] Inside the getHDProductIDsForWorkflow for CC15: 0
[Mon May 02 18:39:56 2016] Inside the getProductListHD for CC15: 0
[Mon May 02 18:39:56 2016] Returning from HD DB
[Mon May 02 18:39:56 2016] List of products installed on this computer
[Mon May 02 18:39:56 2016] List of products for cleaning:
[Mon May 02 18:39:56 2016] Please enter the number of the option of the product to remove; Enter (q) to exit... > >
[Mon May 02 18:40:28 2016] Are you sure you want to clean all the affected products and associated files?
[Mon May 02 18:40:28 2016] Type (y) to confirm and delete or (n) to quit smoking... > >
[Mon May 02 18:40:36 2016] Please wait for Adobe Creative Cloud tool cleaner finish...
[Mon May 02 18:40:36 2016] Open DB connection with path: C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDAPP\pim.db
[Mon May 02 18:40:37 2016] AdobeApplicationManager (URIHandler) executable not found
[Sun May 02 18:40:37 2016]: cleaning-up flying over inventories:
[Mon May 02 18:40:37 2016] Inventory: ' AdobeApplicationManager-1, 0' Type: SelfUpdate, Action: NoDelete
[Mon May 02 18:40:37 2016] Inventory: 'uninstallts', Type: SIDES, Action: delete
[Mon May 02 18:40:37 2016] AAMref found: .aamref {AC76BA86-1033-FFFF-7760-0C0F074E4100}
[Mon May 02 18:40:37 2016] At least one inventory Non-cotes: false, at least an AAMRef: True
[Mon May 02 18:40:37 2016] Delete the contents of the product: CS5Installer, Version: CS5
[Mon May 02 18:40:37 2016] Deleting file: C:\Program Files (x 86) \Common Files\Adobe\caps\pdb.db
[Mon May 02 18:40:37 2016] There is no file: C:\Program Files (x 86) \Common Files\Adobe\caps\Media_db.db
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] SAVED LOG FILE: C:\Users\username\AppData\Local\Temp\Adobe Creative cloud cleanser Tool.log
[Mon May 02 18:40:37 2016] Adobe Creative Cloud tool in cleaning completed successfully
[Mon May 02 18:40:37 2016]
[Mon May 02 18:40:37 2016] *-*-*-*-*-*-: START:-SUMMARY OF THE avertissements-*-*-*-*-*-*
[Mon May 02 18:39:55 2016] DB does not exist in: C:\Program Files (x 86) \Common Files\Adobe\caps\Media_db.db
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:39:56 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:39:56 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the file specified: "C:\\Program Files (x 86) \\Common":
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] WARNING: Cannot delete the file, folder, try again
[Mon May 02 18:40:37 2016] WARNING: Impossible again to delete the file, folder [error 2] the system cannot find the specified file: u 'C:\\ProgramData\\Adobe\\SLStore_v1':
[Mon May 02 18:40:37 2016] *-*-*-*-*-*-: END:-SUMMARY OF THE avertissements-*-*-*-*-*-*
[Mon May 02 18:40:37 2016] -.
[Mon May 02 18:40:37 2016] * = * = * = * = * = * = * = * = *: end of Session: * = * = * = * = * = * = * = * = * = * = *.
[Mon May 02 18:40:37 2016] -.
Hi Ludovic % 20Vignals,.
Thanks for sharing of log files, we would like to know the name of the Adobe software that appear in the menu "programs and features" after using the cleaning tool.
We would also like to know the version of the creative cloud that you try to install.
This is the tool that you can use to uninstall Cloud Creative: CC help | Uninstall the creative desktop application Cloud.
You get a message when creative cloud crashes? If so, please let us know of the possible screenshot.
Waiting for your response.
Thank you
-
xinetd is running at 83% or more 24 x 7 devours battery in 2 hours or less and making the fan run all the time. I am connected to a bug report, and it turns out that it was a duplicate because someone else had the same problem. However, I have no access to the other bug report or find anything either in the discussion forums or online. Anyone experience this problem?
Hello gorgonzola1111,
I doubt that someone else has this problem because xinetd does not part of macOS. Have you installed it from a package of "ports" 3rd party?
-
The following error keeps showing all the time. Unable to find a motive. Any idea on what this means and how I can solve it?
"pteiddialogdaemon quit unexpectedly.
is there a reason you are stay on 10.11.5 and not do the 10.11.6 and subsequent updated?
otherwise I suggest you backup with Time Machine and see if the updates to the OS and iTunes fix this.
Maybe you are looking for
-
I rented a movie from iTunes since my apple tv. I can watch this movie rented on my iMac?
I rented a movie from iTunes since my apple TV. I can watch this movie rented on my iMac?
-
How to connect to myy computer without knowing the password for user account?
-
is there a way to empty the recent documents at once instead of one at a time?
-
The connection to the server has failed. Topic "review of book 1' period, account: 'aldrin ysip', server: 'smtp.aldrin.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E.
-
Expansion of the files in the Solution Explorer, scroll down
After reading several other discussion forums on the same subject, I still don't understand that an answer came, so I'll ask it me. When seeking to expand a folder in the Explorer, which has already been selected, how avoid considering the pane highl