My very old DELL does not start all the time. And when that happens, it doesn't look very good.

Similar Questions

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  * Original title: SUPPORT of the PILOTS LOSE INTERNET.

  My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  What do you mean by "driver support?

  If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

  The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

  Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Character marking does not appear all the time in the outline Panel. How is it?

  Character marking does not appear all the time in the outline Panel again once I tagged them manually. How is it?

  Salvation of Jazz,

  Character marking does not appear all the time in the outline Panel again once I tagged them manually. How is it?

  Sorry for this negative experience. It is a known problem. Add your voice to the bug here: http://adobe.ly/ReportBug

  Thank you

  Kevin

• I installed creative cloud but it has not installed all the products and when I try to install Photoshop or Lightroom nor install it simply places another version of creative cloud.exe into my list of downloads

  I installed creative cloud but it has not installed all the products and when I try to install Photoshop or Lightroom nor install it simply places another version of creative cloud.exe into my list of downloads

  You try to install from the Web or Adobe Creative Cloud application?

  If you had installed the Adobe Creative Cloud desktop application, launch it and connect.

  Once logged in, click on the tab menu Apps.

  After loading the list of apps apps, Photoshop and Lightroom and click Install next to him.

  Location of the Adobe Creative cloud: C: > program (x 86) > Adobe > Adobe Creative Cloud > VAC > creative cloud.

  
  

  For more details, see the 2 links above mentioned in the previous post

  .

  
  

  
  

• Create shortcut folders does not work all the time?

  I needed to create multiple folders shortcut for a project that needs them often, and I just couldn't. Still, I remember in the past and one of them actually have on my desktop for my photos.

  It appeared that in folder trees if I right click on the folder you want, "create shortcut" Option did not show upward! the same with the folders on my desktop would be! If rich of this conclusion, I copied my "recalcitrant" folder on the desktop (had to cut short the copy because it was great!), but got a copy of it on my desk (with only what he had time can be fully copied!). Then right clicked on it and the shortcut option appeared! I re routed the path to the original on my D drive folder and it works well.
  Obviously something does not work as it should and I don't have to do all this, so I hope someone knows the answer to this problem. Maybe a stupid option that must be checked on somewhere...

  I don't know if this is your question or not because it should either work, or not at all. The first fix, here is a zip file which will certainly not hurt to try. It's my answer for those who have reported lately that the new folder option did not work in Win7 canned.

  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible. Here are two patches.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

• My 6 month old dell does not start, application disc... do start that I reinstall Windows Vista?

  My relatively new computer that didn't gave me no problems at all recently frozen. I restarded and it could not start. He asked for a boot drive - I put the disc of the operating system (windows Vista) and clicked on repair computer. He was asked to choose a listed operating system and there was no operating system listed. Then, he said "if any operating system in the list, select system drivers" (something like that). Then it brings up a bunch of files. I click on them and they can not be opened. Reinstallation of windows seems complicated... I'm afraid that I have will mess things up. and I want to be absolutely sure that the problem cannot be repaired first. Help!

  Obviously, somethng has hurt terminally with your operating system.

  Your computer is relatively new.

  It is under warranty Dell for all hardware and software problems.

  http://support.Dell.com/

  Why don't contact you their 1-the above link to get advice on what to do.

  Follow the instructions in Dell to reinstall Vista.

  Below the link of Dell for the info on how-to-reinstal Vista using the two methods.

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  It's way to Dell to reinstall from the DVD on your computer.

  Answer the questions in blue; It is in a sequence.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• FS750T2 does not start, all the lights are green

  I have used 2 of these switches, both with the same problem:

  When I put in the power cord, all 48 ports lights are switched on (green).
  Nothing happens when I connect the switch to my modem.
  Is seems that nothing happens when I use the button reboot and/or delivered to factory settings button.
  All of a sudden (I'm not exactly after what I was doing) I saw a switch in the SmartWizard and 1 single port was green. It seems that the switch worked very well and I have installed the latest firmware. Everything went well, but after I took off the power cable and put it back again the same problem appaers. Now I can do what I want, nothing seems to help to restart the switch.

  Is there a certain procedure to reset to use the reset or factory or pushbuttons for reset?
  Anyone has an idea why the switch is not complete booting?

  Donkey other ideas are welcome, thanks in advance!

  JaapTon wrote:
  When I put in the power cord, all 48 ports lights are switched on (green).

  
  -If all port 48 LED steady green when nothing connected to it, then it seems to be a faulty hardware.

  JaapTon wrote:
  Nothing happens when I connect the switch to my modem.

  
  -Remember that the switch must not be connected directly to a modem only device. However, if it is a modem-router combo, then it is fine.

  JaapTon wrote:

  Is seems that nothing happens when I use the button reboot and/or delivered to factory settings button. All of a sudden (I'm not exactly after what I was doing) I saw a switch in the SmartWizard and 1 single port was green. It seems that the switch worked very well and I have installed the latest firmware. Everything went well, but after I took off the power cable and put it back again the same problem appaers. Now I can do what I want, nothing seems to help to restart the switch. Is there a certain procedure to reset to use the reset or factory or pushbuttons for reset?

  
  -Try to do a power reset. Here are the steps:

  a. press the reset button factory for 30 seconds, while the switch is on.
  (b) after 30 seconds, turn off the switch for 5 seconds but continue to press the factory reset button.
  c. after 5 seconds, the switch while you continue to press the factory reset button. Wait another 5 seconds.
  d. release the reset factory button. Check to see if it will boot completely.

• 8 place of Dell does not start after the update failed

  I had started my new Dell place 8 (with Android 4.2) for the first time, and it works pretty well. I was about to install some applications when I noticed "System update," tap to install. I did and it downloaded, rebooted and started to install with nothing do not appear to be wrong. I waited patiently to settle, and all at the end of the installation, he stopped and displays an error message - which amounted to a bot Android in a pose 'broke, closed, stwaming' and the message 'error '.

  And it has been frozen.

  I held down the power button to turn off and then repressed it see the logo of dell for a fraction of a second, and then a USB symbol for a fraction of a second, then it stops. This happens whenever I start.

  I tried to use Droidboot to reset the installation. I can get this to work, but after that I selected recovery it restarts and after the Dell logo gives me the error message 'pic of the Android dead' with the message "No command." This is an another freeze screen, I can't go further without having to reboot.

  What I want is this thing start, I don't like what version of Android, it runs at that time. Assistance to get the thing to start would be greatly appreciated. I won told the thing in a contest, I don't want to be the proud recipient of a brick.

  In this regard, it turns out that you don't have any loose! I discovered this by risking that it and it worked! I didn't not lose something unique on my tablet.

  Step 1 power off.

  Step 2: Press and hold the Power + flight to access Droidboot.

  Step 3: Choose Reboot or recovery (I chose the recovery! "I would say that recovery is the best option!)

  Step 4: When greeted by Dead Android, room hold press flight - up twice and a mini menu appears.

  Step 5: Select Restart now. In a few minutes, your device needs to be restored and booted up ready to go! Enjoy your Tablet without worry!

• Empire four kingdoms spit / does not start at the time of connection to the server

  After you install ios 9.2 the game "kingdoms of the four empire" spit and wen turn connect to the server. There is no problem with the internet connection because I installed the game in a phone with android system and work it so the problem is in my ipad.

  I Discovred another problem: there is no possibility to rotate the screen

  For the game, what have you tried to see if that fixes it? for example you have:

  -closed the game via the taskbar of the iPad

  -do a soft-reset/reboot of the iPad

  -deleted and redownloaded the game via the tab purchased in the App Store application

  -contacted the developer of the gam.

  For the iPad screen does not rotate, which affects all applications? You do not have blocking rotation 'on' (on the iPad side switch - Apple Support) and if not (after failover it power) tried a soft-reset/reboot of the iPad?

• IdeaPad Y570 sound does not work all the time

  My laptop is Y570

  The question, the sound does not work

  When I start windows I can hear the windows startup melody plays when I start windows media player, video YouTube, VLC player or any other software that requires sound it will not work unless:

  I go to sign in-online sound-online right click test Realtek HD Audio, then the sound works.

  I tried to fix it by the installed driver and reinstall, I went got the driver from Lenovo and it did not work. My speakers are JBL

  Please help me

  uninstall both... reboot then install realtek then reboot then install the drivers of onekey theater.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS018489

• Why are my main features does not record all the time

  My computer is showing ignso soehin on what is happeing I can type. What could be the problem? I have to press the key more than once to and sometimes they gel together, it makes me crazy that all connections have been verified to virus protection says no updtes installed problemal!

  Hi DorisGravestock,

  ·         What is the brand and model of the machine?

  ·         What version of Windows are you using?

  ·         How long have you been faced with this problem?

  ·         You did it all changes before the show?

  ·         Is this happened with specific application?

  ·         What kind of keyboard?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Why my DVD does not start with the film and not on the menu?

  HI -.

  I'm just starting to use yet.

  I import my film as a timeline, my PSD as a Menu, link the button in the menu to the timeline and tie the end to the Timeline action to return to the Menu.  I get no error, when I check prior to construction.

  But when I play the DVD, the menu is entirely ignored.  The movie just started.  End action works and I can navigate the Menu using the remote control, but I want the disc to start with the Menu.

  What Miss me?

  TIA your instruction.

  JL

  Hello

  In this case, first of all, I would check my first piece of the project. You can check the first play in the drive properties in the properties panel.

  Click on the disk icon in the window of the chart and look at the properties of the disc in the properties panel.

  If you want your menu to play first you insert the disc in the drive, then this menu must be set as the first piece of theatre.

  I hope this works.

  Thank you

  Ramesh.