Spooler subsystem app making more than 50% CPU all the time?

Similar Questions

• SVCHOST is keep my 30% CPU all the time!

  My CPU is housed at 30% all the time because of SVCHOST constantly running. There are multiple instances (usually 2 or 3) to operate and my CPU usuage never less than 30%. I watched until it SVCHOST is intended and have decided that I should not stop anything that has to do with it.

  Is there any fix out there to keep it from eating my system resources, or is it just a natural part of Windows now?
  (currently under Vista, even though I have this same problem on my laptop, which is running XP)

  Hi wildgamer,

  We have collected some imformation from the Microsoft Help and how article from the link below which will help you to know which services are used by various instances of SVCHOST.exe are running on your computer.  From there, you can decide if it would be a good idea to stop these services or not.

  Of the atricle:
   
  Svchost.exe is a process on the computer that hosts, or contains, other individual services that Windows uses to perform various functions. For example, Windows Defender uses a service that is hosted by a svchost.exe process.

  To view the services that are running under svchost.exe

  1. Open the Task Manager by right-clicking the taskbar and then click Task Manager. 2. Click the processes tab. 3. Click on Show processes from all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. 4. Right-click a svchost.exe instance and then click on reach or services. Services associated with the process are highlighted on the Services tab.

  What is SVCHOST.exe?

  This is probably a good idea to leave things as they are, if you are not noticed problems of performance for this reason, but it will tell you what services are used by svchost.exe.  Please let us know if you have any other questions.  Thank you. Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• W7 100% CPU all the time - what can I do about it?

  Hi and thanks in advance for the help. My computer has very little memory, so I keep it really clean. Do just about everything with him, it is browse the web and stream media. Recently, it has been very slow, and Firefox (49.2) has suspended all the time. At first, I thought it was Firefox, and I followed all of their instructions to identify the high resource using plugins, etc. I deleted the history, ran CCleaner, etc.. Then I realized that even if I close FF I always see spikes frequent (approximately five seconds) to 100% CPU usage, and it often extends by 50% even if I don't do anything. I ran Avast and Malwarebytes and MSE - full scan with each of them and none of them found nothing. Is it possible that my computer resources is hacked and used by someone else?  As for mining bitcoin or something else?  How I understand this and stop it?  If it is little likely, what can I do to improve performance. It seems kind of ridiculous that open a document or a web page to "forever".  Even to write this post, I type, and then look at the screen, while the letters slowly appear...

  Not sure what is relevant for the problem, but I have 4MB of RAM, but the single 80 GB hard drive (hope I said that right), which only 29GB is free. Right now I am 1480 Cached, available from 1725 and ~ 320 is free, there are 69 total running processes. The only applications that are running are FF and two documents LibreOffice.  I checked a few days ago, and the system says that I don't have to defragment.

  I don't even know if all this has nothing to do with the peaks of the processor, so it's how little I know!

  Any help is very appreciated!

  Try running task Mgr, looking for running applications, locate the (s) using all the resources, R.click on this subject,

  Properties, see what/why use that much... In addition, 69 process is quite a bit, will try to run or cmd,.

  type: services.msc scroll through, double click on one, properties, clear the value or manual start. Manual start

  Are available on request. Also, open the event viewer, get the details of the operating system, looking for event/warning,.

  R.Click, Properties. Also streaming video uses a lot of pc resources.

• Spooler subsystem app stopped working, was closed due to the DEP. How can I restart it.

  How can I restart Spooler subsystem. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  If you mean the Spooler Service, go to start / Control Panel / Administrative Tools / Services and scroll to spooler and make sure that it is set to automatic (put it in auto mode if it is not) and make sure that it is started.  If it is running, stop it and then restart it again.  If it is stopped, start it just.

  If you speak another application, to be more specific and provide the name and version of the application as well as the EXACT text message you received (including all codes).  Here is an article on how to enable or disable DEP using programs that can help: http://www.vistax64.com/tutorials/65790-dep-turn-off-programs.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The MRT.exe program keeps using 50% of my cpu all the time, how do I stop

  I really need help... After you install the update for the MRT. EXE for it can always stay less and its made my computer run slow and my cpu runs at 10 degrees warmer... I need help it is so frustrating.

  First of all, most of the people who respond on this forum is not related to Microsoft.  Unless the machine is identified as a "Support Engineer" or "Microsoft moderator system" or similar, he or she is not employed by Microsoft.  Thus, one who you "connected direct to" was not one of our "associates".

  MRT.exe is the Microsoft Malicious Software Removal Tool.  A new version of this tool is included in the critical updates each month on "Patch Tuesday" (the first Tuesday of the month).  It must run once - at the time download you - where and then be dormant for the rest of the month, except if you manually start upward.

  Apparently, the nameless person with which you handled has not well understand this.

  Have you ever received a message indicating that the MRT found something?

  Click Start > run and then type the following in the run box, and then click OK
     
  %SystemRoot%\Debug

  A Windows Explorer window will open and you should see - at least - a file named mrt.log.  Well, you will see another file named mrt.log.old, which is the last newspaper of the month.

  Open the file with Notepad mrt.log.  You should see something like the following:

  ---------------------------------------------------------------------------------------

  Microsoft Windows Malicious Software Removal Tool v3.19, may 2011
  Began Wednesday, May 11 01:54:01 2011

  Summary of the results:
  ----------------
  No infections found.
  Malicious software removal tool Microsoft Windows has finished Wednesday May 11 01:57:25 2011

  Return code: 0 (0x0)

  If there is an ERROR in the log, post it here or see http://support.microsoft.com/kb/891717

  MRT.exe does not run continuously.  If so, something is wrong.

  MRT.exe should be located in c: Windows\System32.  If she is not there, look for your entire drive, making sure to check the search options "Search system folders", "search the hidden files and folders" and "Search subfolders".  If you find MRT.exe somewhere other than C:\Windows\system32, it is probably malware masquerading as the real Malicious Software Removal Tool.

  Everywhere where you find it, delete it.  You can download the latest version of the MRT here.

  I also suggest you analyzing your system with free MalwareBytes Antimalware and SUPERAntiSpyware.  Be sure to update both scanners before their execution.

  If, after you remove MRT.exe, you get an error at startup complain that MRT could not be found, download and run Autoruns.  Click the 'Connection' tab and look in the column 'Image path' the MRT.exe.  If it is not displayed in the connection tab, click the "all" tab and use the file > search tool.  A characteristic of the search of Autoruns tool is that you must move the selection under the element line "found" before you "Find Next."  Once you find the entrance with MRT.exe, delete it.

• Windows 2000 SP4 shows no more than 1 CPU in the Task Manager

  Hi all...

  My environment:

  ESX 3.5 Update 3

  VM: Windows 2000 SP4, 2 GB of RAM, 2 Vcpu

  Problem: The Task Manager does not appear 2 CPU.

  This virtual machine has been migrated from a VMware Server 2.0 VMware Converter standalone 4.0.1 and if I add 1 to 2 Vcpu and 4 Vcpu, Manager still shows only a single CPU tasks.

  VC on, selecting the machine, performance TAB, I can see CPU 0 and CPU 1, but CPU shows minimal use.

  I have attached the 1 document with 2 images, the Task Manager and the other Virtual Center.

  Go to the Device Manager to the computer object.  If the layer Uniprocessor HAL, you need to change to Multi.  Google, a lot of info out there.

• WUAUSERV takes up 50% of my CPU all the time

  Separated from this thread.

  I have the same problem as the OP, I ran track for 60 seconds during high cpu/memory/fan use and in the end, I stopped wuauserv to show the normal state of my pc. Then saved... Here is a link to the newspapers

  https://drive.Google.com/folderview?ID=0BxySCTCnRImDc1BiNnFpNFdjdVE&USP=sharing

  I have separated you in your own thread because your problem is slightly different.

  This is no doubt WU using about 25%.  I see where when you killed he went down to nothing.

  There's a good thread on it here

  https://blogs.technet.Microsoft.com/asiasupp/2007/05/29/automatic-update-causes-Svchost-exe-high-CPU/

  If the above is not enough, you can reset the windows update service is reading how here

  http://www.tenforums.com/tutorials/24742-Windows-update-reset-Windows-10-a.html

  I would also like to launch a file system check (& DISM) for the status of the operating system

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

  

• Is it possible to set Firefox to load complete sites by default rather than mobile sites all the time?

  I would like Firefox mobile to load the sites full automatically instead of mobile sites by default and have then check the website box full load.
  Any suggestions?

  Hello mabok01, you could try with this addon: https://addons.mozilla.org/android/addon/desktop-by-default (I had to exit the application once and restart it after the installation of the addon is taken into account)

• No more HD comes back all the time despite the fact that I disabled and deleted in accordance with the instructions, why?

  Since I installed this add, she was resurrect every day even after I disable and remove it following the proper procedures, it just reappears automatically without doing me anything to wake it up. If it is removed and disabled, how is it reappears every time? Is add a very annoying on is not as described, but acts like a bug in ad pop up adds on. I AM VERY ANGRY, IF YOU PLEASE ME TELL HOW TO GET RID ONCE AND FOR ALL!

  Have you used one of anti-headache-ware programs? You must use at least
  three of them because everyone does their job a different path. It can not fail
  something that the other will pick up.

• Keep to spooler subsystem app error message.

   
  I get an error message which announces that windows are closed spool subsystem app for reasons of security sikke, all printers are removed from my computer and it is not possible to install new, Microsoft can fix or should I switch to mac computer where this problem does not occur

  Hi lille lt.

  1. What is the full error message that you receive?

  2. don't you make changes on your computer before this problem?

  3. when exactly you receive this error message?

  You can follow this link & check if the problem persists.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  Hope the helps of information.
  Please post back and we do know.

• Photosmart C4485 Spooler subsystem app

  I have a fairly new C4485, only bought last month. So far, I have had no problems at all with it.

  But now when I log in there is an error message saying that the Spooler Subsystem App stopped working as was closed. The printer also is no longer recognized as connected.

  However, I can still send print jobs, but it will print only a very small amount before stopping.

  I went and downloaded the drivers and patches on the site of hp (However, I knew that the pilot was already up to date). But I can not install them in any case, as it says it cannot find the printer and the installation stops.

  I use Windows Vista Business 32-bit.

  Can someone advise me on how to solve this problem, thank you.

  Message edited by David_David on 03/07/2009 02:03

  OK, now press Windows + R key to bring up the run window and type 'cmd', make sure that the "run this program as an administrator" is checked and click OK. Now, type the 3 commands below in order.

  net stop spooler
  sc config spooler depend= RPCSS
  net start spooler
  

  Note the space between "=" and "RPCSS". This space is IMPORTANT. Once this is done, close the command prompt window and try printing.

• Slow Server 2008 performance when you use more than 1 CPU - bug?

  Hello

  It seems that when I run Server 2008 on one of my boxes 3 10.5.7 if I use more than 1 CPU in the settings, the ankles of machine the CPU while booting and then during the use of the operating system.  Normally, I have to run all 3 of them at the same time... and if I get all 3 virtual machines running, the CPU remains just pegged and slows down the machine.

  Then, if I close everything and change the settings to 1 CPU, virtual machines work fine, the CPU barely sees any activity and 75% of the 8 GB is used and it can run for weeks at a time without any problem.

  My 3 VMs

  1 Server 2008 x 64 w/Exchange 2007 2 GB, 1CPU

  2 Server 2008 x 86 File Server/Anti-anti-virus/utilities/Quickbooks, etc. 1 GB, 1CPU

  3 Server 2008 x 86 Active 1 GB, 1CPU Directory

  My Mac run all 10.5.7

  1 Macbook Pro 2007 2.33 Core 2 Duo

  1 mac Pro desktop 2008

  Rig EFIX running 10.5.7

  1 EFIX EP45-DS3R Q9550

  all the boxes are running 10.5.7 with the EFIX running 10.5.7 platform server and I can recreate in one of the 3 machines, 10.5 server or workstation, etc.

  Yes, I have the tools are installed and uses the latest patches, software, etc.

  Thanks for any help...

  VCPU more inside a virtual machine using could be a big problem, if you don't have much physical basis.

  If you set vCPU # = # pCore, then you will have several performance issue, cause you VM hangs (during its run) ALL of your hearts.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Drag more than one MC at the same time

  Hi Eo,

  I need to drag more than one Mc at the time:

  n.b.: emc2 is an mc on the main timeline. This code is in a nested MC.

  Prnt: MovieClip = this.parent as Movieclip;

  function drag(e:MouseEvent):void {}
  If ((e.type == "mouseDown") & & (GlobalVar.stat == 'clicked')) {}
  this.startDrag ();
  Prnt.EMC2.StartDrag ();
  }
  If ((e.type == "mouseUp") & & (GlobalVar.stat == 'clicked')) {}
  this.stopDrag ();

  Prnt.EMC2.stopDrag ();
  GlobalVar.drag = false;
  }
  }

  This.startDrag () stop to work when I add prnt.emc2.startDrag ()...

  Why?

  The documents help explain it as follows: "the sprite remains draggable until the Decree of way explicit through a call to the.

  Sprite.stopDrag()method, or until another sprite made draggable. What a sprite is draggable at the time. "

• Spooler SubSystem App error in windows xp

  I am running windows xp and have had a HP photosmart printer installed for over a year. From now on I get the error: Spooler SubSystem App has encountered an error. I can print the screen and print from IE8, but whenever I try to print from Adobe Pagemaker I get this error.

  Adobe has a forum for all their products, including PageMaker:

  http://forums.Adobe.com/community/pagemaker_general

  I've never seen your problem, but if you search the forum Adobe PageMaker for:

  Spooler Subsystem App

  You will see that you are not alone and find some discussions that involve more than one printer HP and PageMaker and maybe some of these ideas will be a source of inspiration or help.

  If you find nothing inspiring, I post there and see what they have to say.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.

  I have windows xp svc pack 3. I have 2 printers hp psc 2410, samsung ml2010.  I've never had a problem until recently, and now I get 2 messages all the time... the spooler subsystem app has a problem and needs to close and... .instructions @ 0x0041003d referenced memory @ 0x0041003d memory could not be read.  Whenever I try to print my computer crashes. I tried to uninstall and reinstall the two printers.  no luck.  I tried mrfixit and when it comes to the printer part, mrfixit seems stuck in a loop and it is doing nothing more than an hour.  no luck.  I paid for norton antivirus, thinking it was a virus. no change.  paid for advanced system optimizer. no change.  Now that?

  Hi MarthaForner,

  You can read the following article and check if it helps.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."