Keyboard - capture #issue opening/closing event

Similar Questions

• Keyboard key issues

  I have a laptop (DV6206us) and recently started having some keyboard key issues. For example G, H, BACKSPACE, scroll keys and some other don't type/work in a hurry. The keyboard itself has had a cover transparent latex that I installed the keys because I bought it to protect from spills, dust, etc... After taking a closer look, I noticed that if I press a certain area/s around the keyboard keys are working. But as soon as I release the pressure of the particular region the keys stop working.

  This is an easy fix? Something I can do myself? If this is not the case, what would be the approximate cost for the repair or replacement of the keyboard?

  I suspect that my son (15mos) is at fault. I have a few times caught using my laptop as a step back bag, while the laptop was in the bag. The backpack offers a padding on all sides. But I think that the pressure of him standing / use it as a step caused the keyboard key issues.

  The problem has been resolved with just open up the laptop and fixing the connector loose keyboard cable I found.

• Keyboard combinations to open the shortcuts with CTRL + ALT + < letter or digit >

  I like and use this function all day at work, as it works very well with my workflow.  However, the downside for me is that my office is too cluttered with shortcuts to programs and files that I never need to see because I will only use the keyboard combo to open.  Yet, if I put one of the shortcuts within a folder on the desktop, the combo keyboard no longer works...

  At home I use fences and shortcuts still work and I really like it.  Unfortunately, the fences is not supported by our IT Department and therefore cannot install it.  I need windows built in functionality.

  Is there somewhere I can store all my shortcuts so that I should not watch all of them on my desktop but the keyboard shortcut (ctrl + alt +) will still work? Or any other feature where I can get the same result to a blank desktop but use the keyboard to open the files/programs?

  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is looked at by the other professionals that would be more than likely be able to help.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• First 12 items: Opening / closing very slow projects

  I recently installed Premiere Elements of 12 on my MacBook Air and noticed that when you open an existing project or close any project, it will take about 30 seconds to perform the task (multicolored circle of spinning).  It seems to open a new project.

  I had the first elements 11 installed on this computer and opening / closing the projects has been very rapid.

  I read on another post that someone else noticed this too.  Is this normal?

  I think I'm good now.  I have no complaints about the performance now that this problem has disappeared.  2013, MacBook Air, i5, 4 GB RAM, 128 GB SSD.  Only performance issues that I play back video 720 p/120 fps which I can live with given how little I shoot 120 fps.

  Usually no lag or performance problem, but it is the fastest computer, I used it with elements so maybe I don't know what Miss me :)

• How to detect the window closing event and to do some tasks before leaving

  Hello

  Someone knows how to detect the window closing event and to do some tasks before leaving?

  Sridhar

  Structure of the event allows to detect the window closing event. In the structure of the event,.

  Select this VI-> close round table for this task. See attached picture.

• my keyboard will not open due to peer-to-peer what's - it

  What is peer-to-peer has to do with my network

  Friday, April 13, 2012 03:13:30 + 0000, RALPH PEARCY wrote:

  What is peer-to-peer has to do with my network

  First of all, unless your network is a business, it's almost
  certainly a peer-to-peer network. Is the name of a network - a
  Working Group or home group - it is not on a domain with a server.

  Please, tell us what you mean by "my keyboard does not open." Exactly
  What are you trying to do, and what happens when you try? If you get a
  error message, please quote verbatim.

  And "because of peer to peer" means what? Who is your error
  Message?

  Ken Blake, Microsoft MVP

• After opening closed, be prompted to install the update.

  After opening closed, be prompted to install the update.  Accepted the request of updates install, still continue to receive demand updates install on each request to stop.

  Hi DTIRDT,
   
  Thanks for posting on the Microsoft Forums.
   
  First, I suggest to install all updates manually by running the Windows updates and check if all updates are installed.
  Once installed try turn off the computer and check if you are always faced with the question, if so post back so that we can help you further.
   
  It is best to install the updates when the computer is running.
   
  I hope this helps.
   
  Best regards, Niranjan | Microsoft Answers Support Engineer

• Disable the keyboard shortcut to open Adobe Bridge

  How can I disable the keyboard shortcut that opens Adobe Bridge in Illustrator? Often when I work quickly I've accidentally hit it (option command o) instead of (shift control o) describing the type. It stops everything to open the bridge, that I never use and driving me crazy. How can I disable this command?

  Any help would be greatly appreciated!

  change of here:

  

• Y at - it a keyboard shortcut to open the Panel layers?

  I Googled, searched discussions and tried actions registration but have not found the solution.

  What I would like is a simple keyboard shortcut to open the Panel layers.

  That's all.

  I can create and perform actions which create, delete or move channels; Use the menu tab or channels to open it - but I can't seem to find a way to use a key combination to open the Panel layers as you can do for the layers (F7) or actions (F9) boards.

  Someone has an idea?

  Thank you!

  -Bonnie

  You can assign a shortcut using Edit > keyboard shortcuts > application menu >

  Window > channels.

  MTSTUNER

• Does anyone know how to capture the browsers onClose event in Flex 2.0?

  I need to capture the close event of browsers, so I can do something on the server in Flex 2.0. Congratulations to all who can help... Thank you.

  Google: capture the browsers onClose event in Flex 2.0

  There are a lot of "traps" and details to consider. The Flash-based positions are mainly applicable to the Flex as well.

  See also 'ExternalInterface' in the documentation.

  Tracy

• followed by the keyboard open/close events

  Hello, is it possible to suspend the keyboard after pressing the button "submit" on the keyboard. press on submit button indirectly means that the user is done with the keyboard, but keyboard is not get suspended. without suspension of the keyboard, there is a redraw issues on the pages where iscroll is implemented. There are events that I can add to listen for device ready cordova functions through which I can suspend the keyboard with strength in other special cases that submits the case as described above. Please let me know.

  There is no API to open and close the keyboard.

  If you are using a

  withinside, the Send button should (and does) close the keyboard.

  Try the above code and I would like to know how it behaves for you, too, to provide the build of the OS on that you test this.

  I used the following implementation (mobile YouTube uses it too):

  If you close the keyboard, in shipment, simply remove the DOM node that has thefield. This forces the keyboard to close. You can quickly save the data, delete the node, add the node back to DOM and fill it with data. This should be fairly transparent to the user.

• Location of the sensor open/closed W500 or W cover series?

  Does anyone know where the opening and closing of the lid sensor is on a Thinkpad W500?

  Could it be in the hinge / switch or more something like a mechanical light sensor?

  The reason why I ask is because I have a faulty backlight, and I want to isolate the problem. This one that I have not yet tried. Any advice much appreciated.

  THX!

  There is a small magnet on the bottom of the keyboard bezel. The magnet is close to the center-left and all the way in the back. It triggers a switch in the inverter

• T410s lid open/closed sensor

  Is there a way to trick the T410s to think that his cover is closed when it is actually open?

  When the T410s is set to External display (projector) only, the complete boot sequence appears on the external display if the lid is closed.  If the cover is opened the sequence starts past to the external display on the screen of the computer, and then in the last part of the sequence.

  I would like to have the complete sequence directed to the external display when the cover is opened.  I have my T410s sitting in a sliding keyboard of my office, under the table with the lid open to 180 degrees so that I can use the keyboard of the T410s instead of an external keyboard separate.  It gives me a keyboard with a switch and it also gives me a clean table in front of my screen for administrative formalities, etc.

  Thanks for your comments!

  go into your bios, under "config"->"display option"->"device Boot screen.

  Choose the analog (vga) or digital displayport or DVI digital depending on how the external display is connected.

• Microsoft Media all-in-One keyboard functionality issues

  * Original title: all-in-one Microsoft Media keyboard problems with Windows 7

  I run a Fujitsu Esprimo E3521 Core 2 Duo 2.93GHz with 2 GB Ram with Windows 7 Ultimate edition. I use the PC as my entertainment system, so I'm under a dual tuner HD (black gold) and a distance from the media library. The system is contained mainly used for the center of the media, but also streaming from Netflix etc.

  I recently bought a multimedia all-in-one of Microsoft keyboard (previously I had been using a keyboard and wireless Microsoft mouse), installed the drivers successfully. However, the keyboard does not work properly. The problem manifests itself in many ways, in media library, I can't select (i.e. the click doesn't sem to function either by using the left click button or clicking with the trackpad) and the window controls appear not (close/minimize/MediaCentre button) when I move the mouse pointer. When I do not press, the keyboard seems to be more reliable when used all first, but then after a few minutes, it no longer responds to click on requests then I need to remove the computer USB dongle and re - insert to get the keyboard to start to answer again.

  I have all the latest drivers, and the system is constantly being updated.

  Any ideas?

  R

  Hi Richard,

   
  Thanks for the reply with the details of the question. Sorry for the late reply.
   
  Based on your response, I understand now that the lies of problems when you use the media center remote control and keyboard from Microsoft together all-in-one media.
   
  I suggest you run the hardware troubleshooter to check if it detects a problem with the hardware.
   
  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It verifies the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly
   
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  If you still have questions, please refer to the article below and check that helps.
   
  Understanding of mouse, keyboard, remote control and touch input
  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa468225.aspx
   
  Please reply with the results for assistance, we will be happy to help you.

• Ubuntu: Change the keyboard with xmodmap causes closing bracket key to stop working

  I use an Apple keyboard, so I use a xmodmap file customized for change my alt and super keys. When I apply this file using xmodmap, the bracket key closing unresponsive in Firefox, but works fine in all other programs. This means that I can't type a bracket closing or a right brace anywhere in Firefox. in the address bar, the box search, settings, Web sites, etc. It's as if I'm even not press.

  I can 'fix' the key by resetting the xmodmap, with the command: setxkbmap-layout us
  (but then of course the keys alt and super are changed, so I can't actually use the computer like this)

  I apply my file with the command xmodmap: xmodmap ~ /. Xmodmap
  My ~ /. Xmodmap file is pasted below - you can see that I'm not remapping the key closing bracket (i.e. keycode 35, keysym 0x5d, 'bracketright' according to xev). Troubleshooting information has been taken for the duration of my layout xmodmap.

  Please keep in mind: this is only a problem for Firefox. Closing the bracket key works in other programs. So I suspect that it is a bug in Firefox.

  ==== Start of .Xmodmap file ====
  
  ! Swap Alt and Cmd keys.
  keycode 37 =    Control_L
  keycode 133 =   Alt_L Meta_L
  keycode 64 =    Super_L
  
  keycode 134 =   Alt_R Meta_R
  keycode 108 =   Super_R
  keycode 105 =   Control_R
  
  clear Shift
  clear Lock
  clear Control
  clear Mod1
  clear Mod2
  clear Mod3
  clear Mod4
  clear Mod5
  add    Shift   = Shift_L Shift_R
  add    Lock    = Caps_Lock
  add    Control = Control_L Control_R
  add    Mod1    = Alt_L 0x007D
  !because the "0x007D" will assign the "+*]" key to the unity menu
  add    Mod2    = Num_Lock
  add    Mod4    = Super_L Super_R
  add    Mod5    = Mode_switch ISO_Level3_Shift ISO_Level3_Shift ISO_Level3_Shift
  
  ! Configure '=' key on numpad as '='.
  keycode 0x7D =  equal
  
  ! Configure shift-space as space instead of nbsp
  keycode 65 =space space

  Apparently I should have studied a little better. This seemed to be independent, but in fact the specific post, I'm a link has solved the problem for me:

  http://UbuntuForums.org/ShowPost.php?p=11900141 & postcount = 6

  Either I had to remove "0x007D" of the line starting with "Add Mod1".