Keyboard in Logic Pro making strange noise

Similar Questions

• Satellite A350 - Microphone making strange noise

  When talking to people on Skype and MSN people say my mic makes strange noises. They can hear me vaguely on the noise. People say it's a bit like a gurgling noise.

  At first I thought that it would be a driver problem so by using Device Manager in windows I have searched online for a update for my Realtek High Definition Audio and he told me that the version is up-to-date.

  I went from Vista to Windows 7 about 5-6 months there may be that this is a problem when I reinstalled my drivers? Any advice would be appreciated!

  Characteristics of the computer:
  -Windows 7 Ultimate SP1
  -Intel Core 2 Duo CPU P7450 2.13 GHz
  4.00 GB of RAM (2.99 usable)

  Thanks in advance

  Hello

  Driver update might be useful in this case, but the audio driver is not related to the internal mic. The internal MIC is part of the webcam then in this case I recommend to reinstall the driver for the webcam of the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And don t forget to check the Windows sound settings. I would try to disable the microphone amplifier and reduce the volume of the microphone.

• Cooler on Satellite L505 making strange noise

  I have a Satellite 505 for about 6 months, and a few days ago the cooler started making strange buzzing when he works on the high rpm. He fell, got shaked, nothing.
  Is it possible to fix it (maybe clean?) without taking it to the laboratory of support?

  You have enough new notebook with valid warranty, and don t waste your time with temporary solutions and communicate with the service of Toshiba. They should solve the problem.

  Fan may be defective and must be replaced.

• Hard drive on my Sam. A30 making strange noises

  Hello.

  My laptop is Satellite A30 614 with 60 GB. When I do my apps it gives some noise the hard drive and when I copy of documents or install software giving the lost message data. A big problem is until I press F1 my system doesn't boot.
  Please help me.

  Hello

  In my opinion, it's the beginning of the end. It may be worse. Back up all your data.

• A15 - strange noises

  Hello!
  I have an old A15 of 15 months and it started making strange noises. Noises come from the area near the fan (upper right corner). The noises are a scratching noise, beep and a click. The fan does not seem to work properly. But I am concerned about the noise.
  Any ideas/suggestions?
  Thank you!!

  Hi fill me,

  Sorry, but at the top right corner should be DVD - ROM and on the left side, cooling ventilation.

  The sounds you hear are probably noises caused by the DVD-ROM. is there a problem with it? Can you use it correctly?

• How to assign to the logic of distance in a separate in Logic Pro environment physical port entrance

  Is it possible to assign the logical KEYBOARD with a separate entrance in the port of entry of environmental Logic Pro physics?

  Thank you for your advice.

  I don't think so.  Logic of distance is considered to be a controller. Controller input data stream are made (by logic) before stopping the logic entry in physics. I "think" (I'm not an expert on remote logic) that the flow of midi is available on the port of the sum.

  I'm still not aware that you can change the channel of the South on the logic of distance. So it must be channel a (connected) and your other controllers must be able to have their midi outputs assign other channels if you demux their output.

  (please, correct me if this is not correct about the logic of distance - more conjecture on my part because I use remote logical not)

• Logic Pro: MIDI channels

  Hello

  I just bought the M - Audio Code49 and I would like to split the keyboard although tempered into 4 areas.

  I so do not apply on the well-tempered clavier, in area 1 note C1 - B1 channel en 1, canal zone en notes C2 B2 2, etc..

  I then selected the 4 buttons of zones on the well-tempered clavier, in a way that 1 2 3 4 buttons are turned on.

  The settings are so well-tempered clavier do on the pay be split areas en 4.

  Bathroom, on my MacBook Pro (retina, OS X El Capitan), in Logic Pro 10.2.4, I created 4 tracks of instruments.

  I've assigned each (in Inspector > track > MIDI channel) UN number correspond to the MIDI channels 1, 2, 3, 4.

  MIDI channel 1 pour the first instrument, instrument to MIDI channel 2 for the second, etc.

  I thought so have a different instrument by octave on my keyboard, but the Microsoft is not case...

  That do I do? I forgot what manipulation?

  Thank you!

  try turning automatic Demix on I have preferences and down - you that all tracks are enabled for recording.

• Logic pro 10 full install after installed minimum

  How can I do a full install of Logic pro 10 after initially making a minimal installation?

  You can:

  

  Or: Choose Logic Pro > solid library > Open Sound Library Manager

  

• Strange noises coming from the D command

  I bought a Toshiba computer and installed the program, the laptop produces a strange noise coming from the drive D as given that any departure or visit regularly. This happens like every 15 min or 20 min. Is this not a major problem. I just bought the laptop 3 days ago can I change my computer by another?

  I've had in the past a laptop making the same noise and the D drive stop working in 1 year

  Thank you

  Hey Buddy,

  Which drive D mean? The STRANGE internal or second partition?

  Which laptop model you purchased?

  Here he s a user to user forum and it is difficult to say if this is normal or not without hearing it. If in doubt, you should contact an authorized service provider. They can give you an official response on this behavior.

  In addition if your laptop is only 3 days old he should t be a problem to swap it with another.

• SatelliteA200 - 23 k - strange noise coming from the fan area

  I have my model A200-23 laptop Toshiba PSAE6E for 1.5 years and I recently returned from service.
  I sent there due to a nonfunctional key.

  All right, they changed the keyboard... but since I found, I have noticed some strange noises coming from the fan area...

  The sound is not so strong, but it's pretty boring.
  I cleaned using compressed air, but the sound has not disappeared.
  It is still under warranty, but I don't think they would do something against this noise.

  The laptop works very well, it is not overheating or something, but I cannot get used to the noise.
  Should Whatd I do?

  Hello

  Hard to say what noise would that be
  But if the laptop was removed by a technician of the ASP in the past, then you should get in touch with the same technicians again and have to explain your situation!
  A screw has perhaps forgotten who knows
  I think that the technician should take a new look on this laptop

  I wouldn't recommend open and disassemble the laptop yourself because you could void the warranty

• M - Audio Keystation 49th, not its entry into Logic Pro 10.2.1

  Don't know what I do wrong here. I've lived all my Logic Pro X settings and I don't understand why there is no sound coming out of my M - Audio Keystation 49th in Logic Pro 10.2.1.

  Can someone tell me what setting could be the cause of the issue?

  

  (1) the keystation makes no noise... there just send data Midi...

  (2) download the free lunch monitor...

  https://www.Snoize.com/MIDIMonitor/

  Install and then press the keys on your 49th and see if it's midi notes transmittiing to your Mac...

  If it is not then the 49th doesn't correctly... and has nothing to do with logic... See the manual that came with the 59 E for assistance or call M-Audio for help...

  If it is... so that the midi data will be received by the logic so it must be how you have set things upwards in the logic itself... (As you have not selected the right inputs and outputs audio to hear sound from a software Instrument...)

• Qosmio X 70-A-12W produces strange noises

  Hello

  I operate my new Qosmio X 70 without the battery, but I heard a strange noise that stop or decrease if I turn on the keyboard...

  Do you have what it might be any idea?

  I never heard of something like this and I think you're the first person that relates to this topic.

  Have you noticed from the first day or later?
  By the way: why do you not use your Qosmio without battery?

• Logic pro 10.2.1 update - Roland A49 controller has stopped working

  I've noticed since the Logic Pro update to the latest version this morning (10.2.1) that my MIDI keyboard/controller Roland A49 unresponsive.  Whenever I run the Logic Pro application I get this message

  Create MIDI keyboard assignments

  Please select "MIDI CH 1' on your keyboard of series of Roland."

  But despite the tent everything, including resetting my A49, reinstall the drivers, logic will not respond to the keyboard. The keyboard seems to work properly but in Garageband, it seems to be related only to Logic Pro.

  Anyone else have a similar problem with the Roland A49 or similar USB keyboard/controller?   Is there a solution?

  Thanks in advance,

  Simon

  I finally found a solution to this, it might be useful for others who have problems with their controller keyboards.

  http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=122225

  Concerning

  Simon

• Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  Does anyone know why me projected in Logic Pro would be light pulses every now and then and would continue for what seems like an eternity?

  The white flash indicates logic receives an order of what it can not do... Its like a visual error msg.

  I suspect a device connected to your Mac sends an error msg... or even your keyboard typing accidentally pressed causes the white flash error...

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.