Keyboard Microsoft 6000 is not able to connect

Similar Questions

• I am not able to connect a remote desktop from my laptop computer.

  Remote Desktop connection problm

  I am not able to connect to a remote desktop from my laptop with Windows XP Professional service Pack 2, but at the sametime I can access the remote computer from other laptops. I tried manythings but it doesnot work.can someone help me? Thank you

  Hello

  Is there an error code or the message that displayed when you try to establish the remote desktop connection?
  Try it out below mentioned methods and check if this may help solve the problem.
  Method 1:
  Check out the link and follow the steps.
  
  Installation Windows XP Remote Desktop Web connection
  http://support.Microsoft.com/kb/284931
  Method 2:
  You can also visit the link below and try the methods in the article.
  How to use the Windows XP Professional Remote Desktop feature
  http://support.Microsoft.com/kb/315328

• Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

  Original title: Win32/Sirefef.DAtrojan

  Recently, I got the following virus. Win32/Sirefef.DAtrojan

  I was not able to connect to the internet since then.
  Y at - there someone who can help me with the connection to the internet?
  I have a Dell XPS600
  Microsoft XP Professional

  Hello

   
  1. what happens when you try to connect to the internet?
  2 - is confined to the browser Internet Explorer problem?
   
   
  I suggest you perform a full scan of the system.
  Here is a link that will give you know how
   
  Perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I reinstalled Windows XP & he said that if I continue, I'm not able to connect to Windows. I hit continue, and now I can not connect.

  I reinstall windows xp & he said that if I continue, I'm not able to connect to windows. I accidentally hit continue and now I can't log on. Help, please. What should I do now? Lynn B.

  original title: Reinstalling windows xp

  Hi Lynn B,.

  ·         What is the exact error message?

  ·         What type of installation you perform? Is this an upgrade or fresh on-site installation?

  ·         What service pack is installed on your computer?

  ·         You have the Windows installation disc?

  You can consult the following Microsoft articles:

  Install, reinstall, or uninstall Windows

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

   

  How to perform an upgrade on the spot (reinstallation) of Windows XP

  http://support.Microsoft.com/kb/978788

  Hope this information helps.

• not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  not able to connect a printer shared in task force gives the access error is to deny cannot coonect

  Hello

  1. don't you make changes on the computer before this problem?
  2. What is the brand and model of the printer?
  3. What is the full and exact error message?
  4. have you set a password to the shared printer?

  Please answer these questions and provide us with more information. This could help us help you better.

  See the articles that may be useful.
  "Access denied" error message when you print to a network printer, or view the properties of the printer
  http://support.Microsoft.com/kb/307053
  Cannot use network printer if your password is not saved
  http://support.Microsoft.com/kb/312055

• not being is not able to connect it says unable to load the user profile

  not being not able to connect it said could not load user profile and then the computer automatically disconnects me trying

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• I am not able to connect on my user profile.

  I am not able to connect to my user profile.  I'm the account administrator.  My password does not work or I can not recall.  I read a lot about other people having similar problems, and most of the advice given to them is not really easy to understand.  It seems that the person must jump through a bunch of hoops just to solve a problem that happens sporadically for no apparent reason a lot of people.  I had this problem before, except that all my accounts could not be consulted and spent a lot of money to get it repaired.  Now, four months later, cannot access my main account, and the other two accounts don't change anything because they are not the main account.  What can we do to prevent that from happening.  You should not have more than one account as your main account for just because you know you need to because you know it will happen again, no matter what you do?

  Hello

  Maybe this will help you:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Renamed user AD not able to connect

  Hi guys

  I have a problem with a user with access to vFoglight through LDAP authentication. The user was renamed to AD. (name changed)

  After the name change, the user is not able to connect.

  In the audit trail, the user is first OK authenticated, and then in the same second there is a connection FAILURE.

  I tried to remove the user from the vFoglight, wait for a while and then try to connect again.

  I checked on the AD domain controller, and the user is authenticated OK

  What is a SQL question?

  Any ideas?

  Hi, Lars

  I hope you get a solution to your problem, but someone else might have the same problem,.

  I will be the top my solution to the problem that just had.

  We are in a process to rename all connections of users I have AD...

  And once a connection of users has been renamed to AD, the user could not log on.

  With no errors in the journal errror FMS or on our advertising servers.

  New users was created in correct Foglight, but when the user tried to log on, but still had a connection error.

  I found a solution that works for us.

  I found that when I turned on debugging on FMS, I got this error message in the error log:

  Cannot insert duplicate in the "dbo.sec_user_alias" object key The duplicate key value is (Michael dry).

  We run the Foglight database on a Microsoft SQL Server, so I looked in the sec_user_alias of the table,

  and even that I had deleted the former user in Foglight, the login name and the username was still in this table:

  userAlias username isdeleted

  str_xxx Michael dry F

  So I just update the table of user with this name:

  UPDATE sec_user_alias

  SET username = 'Michael dry - old'

  WHERE useralias = "str_xxx."

  and then I could connect with the new login user name,

  but all the settings for this user and config disappeared...

  And as I have not talked with Quest/Dell about this, I don't know if this is allowed to do.

  and I don't take any responsibility that it will work in your configuration.

  Best regards.

  Michael

  Update: I found this: Knowledge Article 85132 - 'LDAP user cannot connect after LDAP name changed"- https://support.quest.com/SolutionDetail.aspx?id=SOL85132

  Post edited by: Michael dry

• not able to connect to windows update

  Win 7 pro 64-bit, sp2 after windows installed 10 has not not able to connect to update server. When an attempt is made to trust installation and a host file resume all cycles of memory and cpu and it will continue to do that too long current arrives at the machine.

  I ran fixit, check tools sfc, 3 different types of root kit tools and PGE antivirus both offline and online, new installation did not help, formatting the drive did not help.

  support Microsoft is still without knowing what is really the issue. If you can help would like assistance

  This problem seems to be related to a windows installation failed 10 what I finally did after a month of working with microsoft is I went to the microsoft update catalog site and downloaded and installed an update stand-alone said to improve the State of update and after about 4 hours it installed and downloaded updates.

  It's the microsoft catalog https://catalog.update.microsoft.com/v7/site/home.aspx

  hope that this help anyone having this problem.

• Not able to connect to internet on my PC in Windows 8

  Hello everyone

  Can someone help me?

  I'm in my office and I couldn't connect to the internet I am connected to the domain, OS installed in Windows 7 on my computer of all the... Suddenly I'm not able to connect to the internet. I checked the cable, it is connected... Y at - it none think to do? Help me. See also a black screen on my computer keeps restarting. pls help

  Hi Bob,

  Since you mentioned that you are connected to the domain, I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• My local network is not sending data but receiving. I am not able to connect to internet

  My local network is not sending data but receiving. I am not able to connect to the internet. No problem on my side of the seller.

  conduct a search on the internet, nothing works

  Hi Kaushal,

  1. What is the accurate and complete error message you get?
  2. don't you make changes to the computer before the show?
  3. which antivirus is installed on the computer?

  I suggest you try the steps from the following link:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

  I am not able to connect to the links in the emails that I receive. When I click on a link highlighted blue, I get a box that says, "this operation has been cancelled due to restrictions in effect on this computer"

  Maybe this?

  http://support.Microsoft.com/kb/310049

  Assuming you are using Outlook, which you failed to mention

  Thank you very much, it worked! Yes, I use Outlook, sorry I mentioned not just but good guess. Thank you very much for the help.

• Not able to connect to the homegroup, it requires username and password

  Original title: h/group connection on my year old d/top & my l/top 6 months, does not. Says I need a/c p/word-WHERE is it? I need to change the system time that is differs from earlier local. - thank you - Stantheman

  Both computers are windows 7. Recently uploaded photo gallery on both, but because they won't talk to each other, I have to copy / paste from one to the other...

  I'm 79 and reasonable computer. Daughter 51 tried very hard, but without success.

  Hi Stanley,

  Welcome to the Microsoft community. As you are not able to connect to the Homegroup, answering a question that helps us provide the best solution:

  What antivirus software do you use?

  Here are a few steps to try:

  Visit the link to check if the homegroup settings is set correctly:

  Homegroup from start to finish
  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  Method 1:
  Visit the link and try the troubleshooter.
  Open the homegroup troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Visit the link to learn more ways to connect to the Homegroup.

  Why I can't join a homegroup?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.