Keys ' fn + ' do not work - Hp Probook s 4730. No "action keys mode" on my Bios.

Similar Questions

• Rebel T5 does not work using the live view. Live view mode is enabled, but images are not captured.

  Rebel T5 is not capturing images when taking pictures in mode live view.  Live view mode is activated but update automatic and image capture does not work.  Any suggestions?

  troyantonik,

  What lens do you have and have you tried other lenses with your camera to see if they also not auto focus when you press the shutter button halfway?

  Just in case a parameter can be the cause, I recommend you to reset the unit to default settings.  Follow these steps:

  1. Press the MENU key.
  2. [#3 tools] tab.
  3. Select [clear settings].
  4. Select [delete all device settings].
  5. Click [OK].
  6. Select [clear all custom Func.].
  7. Click [OK].
  8. Exit the menu.

  If it is a time sensitive matter, additional support options are available to contact us.

• Tecra A9 - network does not work after wake up from the sleep/hibernation mode

  I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
  Keep it light, but there is no network and to solve it, I need to restart the laptop.

  Any help please.

  Kind regards.

  This is a known issue so take a look at this site:
  http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

  Updated the BIOS, and then it will work.

• USB ports do not work after waking up Satellite A200 from sleep mode

  After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!

  Hi mate,

  already tried this:

  Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.

  Maybe it works. Another solution would probably be this Microsoft KB document:

  http://support.Microsoft.com/?scid=kb%3ben-us%3B812946&x=8&y=9

  Greetings

• IncrediMail Plus does not work in Windows 8 PRO, even in compatibility mode

  Since the installation of Windows 8 PRO my incredimail Plus program e-mail does not work even in different compatibility modes.

  IncrediMail (Perion) technical support is worse than useless and aren't even not respond to requests for advice or assistance

  I found a post on their forums date dated 1/12 Nov: http://forums.incredimail.com/viewtopic.php?t=11167#p42981 indicating

  Please note that IncrediMail 2.5 version is now fully compatible with Windows 8.

  Note: This version uses IMAP technology so that you can experience problems when importing the old backup files.

  No mention of how to get around that.
  

• mouse and keyboard do not work once the computer wakes up from sleep mode

  running Win7 64 bit

  Processor Intel core 2duo
  x 2 corsair 2 GB RAM
  ATi Raedon 4800 series gfx
  all the drivers are up to date.
  no idea why they don't work after the release of the mode not sleep? It is very frustrating as I have either stop whenever I'm done with the computer, or reset when it comes out of sleep mode.

  Oops, ok, so I disappeared for a bit there.

  Yes, I tried that as well.
  OK, so, this weekend, I flashed my bios. and that seems to have solved the problem (woohoo)
  for anyone else reading this, if you are not very savvy with computers, I would say DO NOT Flash your BIOS, but find someone who knows a little about computers to do it. If you do not Flash your BIOS correctly, it can damage your motherboard

• Insert a character does not work in DW 2014.1.1 in Live Mode

  When I try to insert a character by using Insert, character, all the choices are grayed out in direct mode, although I can insert characters with no problems in Design view. I use the Windows of DW 2014.1.1 version.

  Is that what this destiny, a bug in the program, or a particular problem in my installation?

  This is most likely an oversight.  The development of DW team has made improvements to edition Live View, but it is still not perfect.  Things like inserting characters, spell checks, working with templates, etc... always requires that you are in Design mode.  Unfortunately, Fashion Design is not an option when you work with FGLayouts without a workaround.

  Nancy O.

• Immediate stop will not work, must give up to go in standby mode SunCluster

  Client has a Solaris Clusterware, the customer sees the semtimedop() system call return EAGAIN when executing "stop" on their database on a cluster node. This is expected when the shared resource, the semaphore is the protection is not available. The shared resource is only used by the Oracle process, so we need to know what is the resource and what other processes with it. MOS doc 760968.1 is not useful. A crashdump Solaris when the database shutdown problem took place showed no sign of an OS issue so the help of the database is required.
  
  We have tried to capture the following trace, but track is empty, and we're stuck since then.
  
  SQL > alter session set events 10046 name context forever, trace level 12';
  "SQL > alter session set events 10400 name context path always, level 1;
  SQL > shutdown immediate;

  +... moved post of forum Sun servers which is a HARDWARE forum for HARDWARE questions, +.
  the Forum Oracle Clusterware, for better alignment of the section.

• Function key does not work on Satellite L50-B-1 q 0

  I bought a new computer notebook "toshiba satellite L50-b-1 q 0' and I changed SO Win8 64 bit--> Win 7 64 bit.
  I installed all the drivers and the pc is running, but the only problem is the function key.
  The value of added driver package is installed, but is at - it another way to solve this problem?

  Thank you
  Marco

  Hello

  Please check if you can change the settings on the special function key mode in the BIOS.
  Usually this option allows you to use the function keys without pressing the FN key.

  Play with this setting and don t forget to save the changes to the BIOS.

  Also ensure that the BIOS is already up-to-date and the VAP has been properly installed.

• Qosmio G30-163 mouse and keyboard does not work properly

  Hi all

  I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

  "Start the Registry Editor (start, run and type regedit and click on).

  Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Exit the registry editor.

  Reset. »

  Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

  I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

  John

  S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

  This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

  Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

  First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
  This would allow you to save the data to another HARD disk.

  Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
  I hope that this will be possible because I don't see another way to get the operating system again.

  Good luck by a friend

• Sound does not work on startup upward

  Hey everybody,

  I bought a HP Pavilion g6 (Windows 8) 8 months ago and I must say; This is a great buy. But recently (last month or almost) the sound did not work when starting. The sound says it goes (the volume mixer), but there is no sound. After you open the mixer volume a few times and it will crash every time. then the sound comes back. Is there any fixes for this? I already refreshed the PC several times and did a factory restore twice.

  Any help would be massively appreciated.

  Hello isaidnomods,

  I understand that the sound is not working properly.

  Go to HP.com and update the BIOS and the IDT audio.

  Here is a link to the update. You will need your product number.

  You can find this information by holding the FN key and pressing the ESC key.

  I would like to know how everything goes.

• Vista won't start and F8 does not work

  I got a SONY VGN-SR140D laptop, when I try to start the system. It behaves as follows:

  
  

  After past the Sony logo it enters a black screen with an indicator of underscore flashing on top of the left hand and remains there goes no where.

  I try to press F8, it does not work. However I still be able to get into the bios.

  I use windows vista DVD to start the system and perform the Startup Repair, but it shows that there is no error. Can I use the memory diagnostic tool to check the memory, but it will not display any errors. Therefore, I use the command prompt to perform the disk check, it displays no error.

  After all, I'm trying to restore to the last point, it shows that I don't have a restore restore point. As a result, I am stuck here, please help.

  
  

  Hello

  Looks like there is some kind of hardware problem. Check with a real store of the computer (not the leeks and pics
  at a Best Buy or other department stores) or the Sony Support.

  Data may be saved by placing the hard drive on another computer as 2nd car, or in a
  box external USB drive - or you can copy the data to removable media such as CD, DVD.
  or other USB keys.

  You should be able to do a clean install of Windows which would require programs to be reinstalled
  and the data restored from backups (see above). That might not work system exists without repair.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Black lines under titles, rightclick not work / display options, flash and video appearing as black

  Hello.
  For about a day now, I had to go through the horror of converting all my stuff on this horrible slow browser, chrome. And at this point, I want to just my firefox in return.

  I can't seem to find a "Add attachments" button, so I just uploaded to imgur to make it easy for you. http://i.imgur.com/plDjLJ0.PNG

  in any case, I think that to happen began after a command prompt has been given on the Aurora or all night, where he asked me if I wanted to try your new multi threaded browser or whatever. Me, who want to continue with that I pressed Yes. A little later, I started to notice that nothing has worked in fact more. I even tried to uninstall all instances of firefox I have on my system, including Tor, and again, the question seems to persist.

  I'm under the OS Windows 8 with an AMD CPU and GPU.

  It is probably in the Nightly build to try e10s (electrolysis).

  • https://wiki.Mozilla.org/electrolysis
  • http://billmccloskey.WordPress.com/2013/12/05/multiprocess-Firefox/

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• I used the recovery disk for my windows vista and now my admin name and password do not work. Can I just switch to windows 7 or 8?

  When I turn on my pc it loads windows vista but somehow my name and my password do not work now.  I can go in safe mode, but it won't let me change the name or password.  I wonder if I can just get on with windows 7 or 8 without being able to access my current windows vista?

  Hi Sean,.

  Please follow the methods.

  Method 1:

  Follow the instructions from the link

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Method 2:

  Follow the instructions from the link

  Boot from the Windows 7 DVD to perform a custom with formatting the hard drive installation.

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/installing-and-reinstalling-Windows-7

  NOTE: before starting the installation. should be ready for the worst case scenario that leads to your existing data on your current computer to delete. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you start the installation.

  Reference links:

  System requirements Windows 8

  http://Windows.Microsoft.com/en-in/Windows-8/system-requirements

  How to upgrade to Windows 8

  http://Windows.Microsoft.com/en-in/Windows-8/install#1TC=T1