kmoy data on too high esxtop

Similar Questions

• URGENT - Data rate "TOO HIGH FAILURE" - BUT this isn't the two videos, it takes 9 subtitles tracks! Help, please!

  I'm a standard definition DVD authoring using Encore CS6. I imported two videos high definition (1920 x 1080) (63 min and 4 min.) directly to a calendar. There are 9 subtitles.

  I have converted video high-def exactly like these while encoding several times with success. I use this custom setting: Codec: MPEG2 - quality: 5 - VBR 2 pass - Progressive - Min BR: 7.2 - target BR: 8, Max BR: 9 - 23.96 EN matches source. Due to the fact that I used this predetermined dozens of times, I don't think lowering the Min, the target or the Max BR is going to solve the problem of data failure rate.

  I am inclined to believe it's 9 subtitles after that review "Data rate too high failure" messages here.

  As ALWAYS, I'm on a deadline to customer.

  Okay, this preset has always worked in the past, but I would have thought you were pushing things with him.  Subtitles can be the proverbial drop of water!

  I had problems in the past with that high bit rates and also during the definition of quality to 5, instead of 4.  For example, I always use 4 quality and will never more than 7 for target BR.  Even with these settings, I had problems earlier this year with a chronology which contained a series of 20 JPEG images - there were always reluctant to the second jpeg, and I had to down to 6.5 before it was OK.

  Have you tried a lower BR?

• PE 3 - DVD burning error - data rate too high

  I imported a slideshow of Photoshop Elements 5.  I made minor adjustments and added music.  Now I am trying burn to a DVD.  3 EP passes through the encryption stage and when it gets to the burning stage I get the following error message:

  "The flow of data in this file is too high for the DVD.  Youy should replace the file with one of a lower rate. »

  I get this message when I try to burn on a DVD or a floder.

  Any suggestion greatly apprciated.  Try burning a DVD for this weekend.

  Dave

  Dave,

  As a little "trick," pick up some discs DVD RW to test - no more "coasters". Do NOT use these drives delivery, but only for use/reuse as tests.

  I use the pre big brother, PrPro and more (creation) and yet always did a great job in auto mode, but some sequences could well bring pre evil in this regard.

  Please report your success.

  Good luck

  Hunt

• Another Question error too high rate data

  Hi all

  I saw a few posts about pgc errors, but most of them deals with slide shows and video not; and I can't find anything with the REF = KApgc error.

  I'm just all my movies on a DVD created, not rocket science.  I use the 'submenu Film' preset with only top 5 movies, things like Easter, birthday, etc.  My transition for each button is a slate (for lack of a better word) which says exactly what it is and when it happened, before each movie plays.

  After I had set everything up, I realized that I didn't have an opportunity to "play all" which would include these slates.  A simple solution, make a 'play together' button that links to a timeline that has everything in it - slate, then the movie, then slate, the next movie and so on.  (When I say movie - they are all .mov files rendered from After Effects, even the slates)

  My transcoding settings are NTSC DV high quality 7 MB VBR 2 pass and the "highest quality" is checked.

  When I run the "check disk" all right.  Listen to samples of the disc, all right.

  Build disk: transcoding hours then the error: data too high to * timecode * REF = KApgc.

  When this film is in itself with a click of a button, it is fine.  It is only in the scenario 'play together' that it produces the error.

  If the flow rate is not too high in one place, why is it too high in another?  It's the same thing, just a longer timetable.

  Help, please!

  Thank you.

  Only a calendar.  But it's just a few clicks away...

  -Jeff

• Satellite L850 - 150 PSKDLE - a little too high internal temperature

  Hello friends of support.

  Satellite L850-150 PSKDLE - 07L 00
  Slow times get a little hot atm... (60 - 70).

  If I want to change the cooling block, but my problem is how to disassemble the laptop?
  Google does not want of hits on this topic...

  Can someone help me with this?

  Thank you very much.

  In my view the 60-70 ° C are not too high.
  For me high temperature is about 80-90 ° C, but at 60 ° C is nothing unusuall.

  Furthermore, always depends on how you use the laptop and what software is running.

  Play games, you will always notice a higher temperature.
  In General, you should pay attention to the internal cooling fans.
  Dust and debris could be the main reason for a higher temperature and clean the holes and vents should be good enough to keep the temperature low.

  Use compress air jet to get rid of the dust. Usually, this helps.

• Too high temperature on Satellite Pro L20?

  Hey,.

  last night, when the temperature of the 'Temp 1 meaning' of game reaches 101 ° C / 210 ° F.

  Is - this too high?

  My Toshiba Satellite Pro L20 is now almost 5 years old. The fan works and the Bios for the cooling setting is set to 'Performance '. If the current clock speed is roughly 800 MHz (1.7 GHZ), feel Temp 0 is between 35 and 40 ° C / 95-105 ° F and the Temp sense 1 = 50-60 ° C / 120-140 ° F.

  Michael

  Seems a bit high for such a machine... have you ever cleaned the cooling system of your laptop?

  Could be the fan and cooling impeller is clobbed with the dust that causes these high temperatures. I suggest you to go for an electronic market, take a can with compressed air and clean with compressed air as the cooling system of dust and all that lives inside your machine. :)

  Please check after cleaning if the temp rise again.

  Welcome them

• Satellite A350D - too high temperature of the processor

  Hello guys.

  My laptop CPU temperature is too high. I have Windows 7 Ultimate 64 - bit edition. And the temperature at idle is ~ 70, she raises up to 98 C when loading the system. It happens only with 64-bit OS. 32-bit Windows idle temperature is ~ 40-50 ° C.
  I have the model A350D PSAKCE.

  Any ideas?

  Hello

  There is a new version of 64-bit BIOS.
  In your case, I recommend to check the version of the BIOS.
  If you still use an older version of BIOS (perhaps 32 bits), then you need to update it to the latest version of BIOS 64-bit.

  Good luck

• The Lenovo G50 80 screen too high contrast. How to solve this problem?

  I bought a Lenovo 50 80 g (it's under warranty). I'm having this problem with contrast/brightness of the built-in display. It is that it is too high (unacceptable), it is not natural and I can not yet able to fix is a problem or software drivers for hardware? Please guide me how to solve this problem.

  I think I've fixed this by right click on the desktop and choose Properties Intel graphics from there I went to the power Option and (in the menu dropdown) chosen on doughy and disabled Disable Power Saving Technology

  PS: in addition to this I adjusted also in contrast to 45 in the color settings.

• PSC 1315 all-in-One with Windows 7 (64), SP1, prints too high on the page.

  My printer prints too high on the page. Regardless of the printer or document settings, the first line prints at the top of the page. This problem is not present with Notepad, but appears with WordPad and Open Office Writer. How can I pay for this investment?

  Response to Shane_R:

  I spoke too soon. I think that I was not successfully download these drivers because I received messages that the original driver has not been installed. (Don't know why it worked once.)

  In any case, I found an old link to the HP site for my all-in-one model that provided a full hybrid software and driver download makeover. I installed it correctly and so far everything works better than before. Thanks for me toward the pilots initially.

  It comes to seventh year of my printer and second course of youth. Now maybe he'll go another seven.

• Power is too high

  Hello

  Model: Hp Pavilion DV6

  When I plug the charger to the laptop, the power is too high and when I remove the charger power is low, please me advice.

  Osama S

  Ok.

  Go to the control panel and select power options.

  

  This is where you can choose when the screen of the laptop turns off. It is located to do so to give you more laptop works when it is on battery power.

  Best regards
  ERICO

• My B50-80 ram usage is too high for a few days

  Hi, my lenovo B50-80 ram usage is too high. It is around 80-90%.but why is this? It slows down. This problem occurs for a few days. It is 30-40% on the previous usage. But in recent days, he has suddenly increased to 80-90%. It slows down the laptop. I have not installed any program in these last days.what to do?

  Hi Johanna,.

  Alternatively, you can try to uninstall the applications that consume more memory, which is not used frequently, if still the same issue trying to run the diagnostics of the LSC (Lenovo Solution Center).

  Click here for LSC diagnostics.

  Let us know the result.

  Best regards

  Ashwin.S

• 6500 copies too high to the top of the document

  Printing: 6500 has more E710n-z

  Op sys: Windows 8.1

  The printer prints too high on paper: the 6500 prints even his own test page with lettering half cut off at the top. Printing from Word is the same, so it's not a software or application problem.

  HP update is defined on, and the drivers are the latest: Firmware = CIP1FN1206AR, the version of the software = 028.000.1315.000, 09.84.00.1189 = driver version.

  I saw this issue raised in other - apparently hard for a few years - messages and responses were not useful.

  Can we remedy and suggest or offer a remedy?

  Hi Blennerhasset,

  I understand the printer prints too high on the page and even the test page is cut off. I see that you already have a troubleshooting, but since I'm not sure what you've done already I suggest all initially an alignment;

  1. Load US letter or A4 size, unused, plain white paper in the tray.

• Why has my Aspire 5750 G temperature - is too high

  Hello guys. Why has my Aspire 5750 G temperature-"6 GB RAM / Intel Core i7 2630QM 2.0 GHz 2.93 GHz / 540M GPU"

  is too high as it my power options is high-performance but in any kind of power change options, there is nothing

  Sorry for my bad English

  To be honest, I think it's quite normal. Its an old laptop, 2nd generation and it is a processor of 45 w. (QM)

  I have an i5-6200U, and my time will never more than 60 C. Its 15W

  Maybe you should clean the fans a little, if you've never done before.

• When I print business cards, they print sometimes 1/4 too high, but not always.

  I have my business cards in a Word document by using a template Avery. I used the same file for years. I never had a problem with my Canon printer, but after buying an HP Photosmart D110, I got nothing else problems. When I print, then they print approximately 1/4 in. too high ruin cardstock and waste. This happens not all the time. Sometimes I print and they are perfect but when I come back and print another, the problem returns. It is the same strain of the map that I have used for years and when it is inserted in the printer it doesn't matter if it's a single page or a stack of them. I tried the page preview before printing and the alignment is correct. I tried to print to PDF and then print the PDF, same problem. I try on the barrel and no problem. Only reason why I bought it was in the first place the cartridges were cheaper and I do a lot of color printing and scanning.  I just replaced the cartridges and did a head alignment is not the problem. I tried it with plain paper and the problem persists. I'm ready to give up anything to join your room and buy another Canon!

  AuntieEm, thank you very much! It worked flawlessly! Hugs xoxoxo

• My page is printed too high. When you print the report of diagnosis of iMac, top of page letters are cut off the page

  I have a hp c310a all-in-one.  When you print cd labels, graphics look good on preview before printing, but when it comes to the printer off, the graphics are about 1/4 "too high, which leaves the low" 1/4 of my blank cd label.  I printed a report of quality Diagnostic print from my mac and it came out too high.  Cut the top of the report, it began printing until the paper is correctly positioned.  When you print the Diagnostic Report of quality printing directly from the touchsmart on my printer screen, the report will print very well.  I wonder if there is a setting miss me when I go on my printout.

  Hello

  This really sounds like a parameter of the wrong paper on the computer, type or wrong size setting can cause these issues, especiallly it seems to work perfectly when printing directly from the camera.