knot breaking outside

Similar Questions

• ComboBox menu outside the bounds of the Panel

  I'm starting to feel like I'm talking about me here...

  Is it possible to make the drop-down list of a ComboBox break outside the limits of a Panel?

  I have a drop down enough, and to see all of the items, the width really needs to expand outside the bounds of the Panel...

  I'm sure I'll have the same request for height, but I have not had here yet...

  Substances

  Substances,

  Take a look at flash.display.NativeMenu (Air API). I'll probably get to try it later today or tomorrow; but I thought I'd give you a heads up when I want to come with her. It is probably not a combo box by itself, most likely a menu of native context that you place on the button/image/whatever.

  Bob

• How to get rid of an extra space between what's new in the news module

  My home page is www.turbocam.com. Notice on the left side there is a space extra between paragraph 1 and 2.  Between article 2 and 3, the spacing is normal. I have not touched the model. Any thoughts as to why this happens? The module is listed as:

  {module_announcement, l, 3}

  Thank you.

  Liz Dorsett

  Turbocam

  Never mind! I thought about it. I had break outside the DIV tags!

• Move items outside of loops without breaking the threads

  Hi all

  is it possible to spend a few elements and their son outside a loop without breaking the connections? He became a real pain when you have more items to move and reconnect everything one by one.

  Thank you very much!

  Today, there is no option to do this directly. Which would probably require less work is to detach the buckle, move objects and then draw the loop again, but it would depend on the amount of work is required to configure the loop (shift registers, etc.). You will probably be able to write script code to do this (or to move the code outside the loop and rewiring it), but I expect that the work required to write and test the code will be larger than the work required to do this. You could do a search for the Quick Drop 'remove and rewiring' plugin to see how it works, as it does part of the work.

  A few years ago, NEITHER showed a demo of an experimental tactile editor who had this behavior integrated, if at least they are aware of him and maybe you will see in BT at a given time.

• Aspire 5738z motherboard works outside the laptop breaks but not?

  Hope this is the right part of these forums...

  Someone at - he heard of this before. (STUPIDLY), I decided that my fan needed a good, clean, and in a moment of madness I removed the heatsink and cleaned, I have had no paste to renew with at the time but thought it would be ok.

  Acer Aspire 5738Z dedicated ATI Graphics Intel Core 2 Duo

  I missed the fan plug when I re assembled the laptop and of course, it wouldn't start. So after back by getting the cleaners and stick and PLUG the fan, I tried to start again... Nothing to do apart from the fan works and stops, then comes back on - the power light lights up - the processor lights up for a second - and the cd tried to run.

  I did all the usual like removing the Ram etc Hold button power and did so on... still no joy

  So I stripped the motherboard into the case and everything took off, I have replaced the following only

  HARD DRIVE

  1 x 2 GB Ram

  Monitor

  Battery

  And success, that it starts without a problem

  I tried then restarts and they were very good, so I put everything together and nothing only happened?...

  So I stripped it again and this time I plugged everything

  HARD DRIVE

  2 x 2 GB Ram

  CD/DVD

  Monitor

  Battery

  WiFi

  USB mouse

  USB keyboard

  Began and once again without any problem she started and restarted a time without end. So I removed all and placed in the base of the case and then reconnected everything and got the same good boot. I then placed the upper part of the base on so he was running and it was fine, then I rebuilt around the laptop running until the unit was together again... Always slept running. Although my mousepad not working keyboard

  OK, the moment of truth... Restart... or rather not - back to the beginning with no boot

  Does anyone have any idea as to the cause - I wonder if the keyboard or mouse may be at fault, but as far as I know, it could be more sinister.

  Any help would be fantastic - but please no suggestions to remove the ram and pressing the power button down as my finger no headache trying this lol

  It seems to me the connection of the USB unit on the side of right which is at fault. I have rebuilt the laptop but removed the USB cable and it works fine... Looks so much like problem solved for the moment in any case

• Inside or outside the line breaks?

  It seems that when I try to switch to another line in Design view by using SHIFT + ENTER, DW seems to place the < br / > inside the tag I just ended.   If I only seek to add a space after my last tag should not the < br / > come after the end of the h2 tag?  Thank you.

  Well not really, if you are in Design view and place your cursor within the tag and do a shift + enter, DW think you want a space after the text.

  You if you want a space after the tag, why not not just hand code in it... better yet, add a rule for the tag bottom margin.

  H1 {}

  whatever fontstyles goes here;

  margin-bottom: 10px;  / * adjust as needed * /.

  }

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  http://csstemplates.com.au/

  --------------------------------------------------

  http://Twitter.com/nadiap

• I just downloaded the add-on 'take a break', but I can't see an icon anywhere on my screen. Can someone help me with this? I would be very grateful... :))

  The add-on 'take a break' sounded like something I needed so I got the add-on, but do not seem to see an icon or something like it... any advice would be appreciated... :))

  You normally have the bar displayed at the bottom of the window module? You can use Ctrl + / to put it on and outside, or right click on an empty area of the tab bar and choose it from the pop-up menu.

  To change settings of the extensions, you should be able to use this tab to get to the Options button:

  Firefox orange (or the Tools menu) button > addons > Extensions category

  A little luck?

• DAQmx: With relaxing break pulse blocking

  I have a NI 9401 module in a chassis 9171 and stand at the door of the output of a counter with the release of another counter. 1 meter (the signal to be blocked) generates a 3 Mhz signal and meter from 0 (the door) generates a 10 Hz signal that is sent outside to door pin of 1 meter. I expect this would be counter 1 door signal to produce the 3 Mhz flashes only when the counter 0 is high, but the wiring had no effect on the output of the 1 meter, it has always generated a continuous pulse train of 3 Mhz.  I found that a code is necessary to get a counter to pay attention to the signal to his door pin (this message was particularly useful) and it can be done with the node property relaxing break. After you have configured the node, however, I fell into this error:

  Error-20124 occurred at DAQmx start Task.vi:2
  Lines 4 to 7 of this port are configured for the entry. Cannot configure these lines for output at this time.

  I'm quite puzzled by the present.  The problem seems to come try it designate 5 PFI ('CTR 1 door' on the 9401) as the source of relaxing break.  If anything, I think the error would be that lines 4-7 are configured for output, since these lines are grouped under CTR 1, which is configured as a channel of CO to generate the 3 Mhz pulse train, and the definition of line 5 as the break source changes the configuration on an entry.  Looking for this error in the forums OR and Google isn't pulling up of troubleshooting information.  I tried to create a task to configure line 5 as a separate digital input channel, but then I get the error saying (error-200125) opposite that lines 4-7 are configured for output and cannot be configured at the entrance, to make things more confusing.

  Any thoughts would be appreciated.  I'm afraid I'm missing something obvious about blocking the impulses or CO channel configuration as I continue to read that one of the benefits of DAQmx on Legacy DAQ, is that it makes easier routing signal.  I'm using LabVIEW 2012 (32 bit) with DAQmx 9.5.5 installed.

  Hi agoncalves,

  I took a glance at your VI and I see two immediate problems:

  1. it is not guaranteed that the two tasks will be reserve before the start of each one.  This explains your error and why it seems confusing.  The 9401 is configurable nibble, but you cannot change the direction while the device is being used (why the reserves are important).  The module starts with two nibbles the input value.  Your first task causes an exit so it switches direction on one of them.  When your task is committed (started), it hangs in this configuration.  The second task then also try an output drive, but on the other nibble that is entered and can not be activated because the first task is currently running.  The solution is to use the thread of the error to force the order of execution (or use a flat sequence structure).

  2. you won't run out of problems with your trigger signal unless that connected you to a separate entrance (and put the two trains of pulses on the nibble even).  You can change that by setting the property of canal CO. Pulse.Term. that's if you want to spend your signal through a few circuits external and back in.  If you use the signal directly, you can just use it internally.  By example/cDAQ1Mod1/ctr0InternalOutput

• Digital button &amp; code that must run outside the switch of the event

  I have an interesting situation.  I have a command button which I activated the control via the mouse wheel of the user (thanks to great examples of code herein for one!). To do this I like, I had to put the processing part of the code outside the set event button, such that the value of the output of the control would be updated immediately.

  The only problem with this methodology which is then when the user closes the Panel and the button control is a final reminder, this block of code is executed one last time, which translates into a non fatal error "invalid control ID '.  The solution here is relevant, but is not ideal as shown above.

  My solution feels like a hack, but tell me what you think - trap on EVENT_DISCARD and back at the beginning.  Seems to work, just feels like a patch.  Here is the code:

  int CVICALLBACK KnobCallback(int panel, int control, int event, void *callbackData, int eventData1, int eventData2)
  {
      int prevValue = 0;
      int currValue;          // current value of knob control, range = 0-100
      double currMotor = 0;
      double currMeter = 0;
      double idealMotor = 0;
      double currVoltage;
      int max, min, inc;
  
      // find the range values set in the UIR control:
      GetCtrlAttribute(panel, control, ATTR_MIN_VALUE, &min);
      GetCtrlAttribute(panel, control, ATTR_MAX_VALUE, &max);
      GetCtrlAttribute(panel, control, ATTR_INCR_VALUE, &inc);
  
      // load the current control changed value:
      GetCtrlVal(panel, control, &currValue);
  
      switch (event)
      {
          case EVENT_COMMIT:  // any control commit:
              break;
  
          case EVENT_MOUSE_WHEEL_SCROLL:
  
              switch (eventData1)
              {
                  case MOUSE_WHEEL_SCROLL_UP:
                      if (currValue < max)
                          currValue += inc;  // increment 1 step at a time, not eventData2 number of steps (Windows scroll wheel number)
                      else
                      {
                          currValue = max;    // hold at max
                          return 1;   // Swallow event to prevent from updating UIR
                      }
                      break;
  
                  case MOUSE_WHEEL_SCROLL_DOWN:
                      if (currValue > min)
                          currValue -= inc;  // decrement 1 step at a time, not eventData2 number of steps (Windows scroll wheel number)
                      else
                      {
                          currValue = min;    // hold at min
                          return 1;   // Swallow event to prevent from updating UIR
                      }
                      break;
  
                  case MOUSE_WHEEL_PAGE_UP:
                      if (currValue < max)
                          currValue += (inc * 5);  // eventData2 = 0 when PAGE up/down
                      else
                      {
                          currValue = max;    // hold at max
                          return 1;   // Swallow event to prevent from updating UIR
                      }
                      break;
  
                  case MOUSE_WHEEL_PAGE_DOWN:
                      if (currValue > min)
                          currValue -= (inc * 5);  // eventData2 = 0 when PAGE up/down
                      else
                      {
                          currValue = min;    // hold at min
                          return 1;   // Swallow event to prevent from updating UIR
                      }
                      break;
              }
              SetCtrlVal(panel, control, currValue);  // update control with processed value
              break;
  
          case EVENT_VAL_CHANGED:
              if ((currValue < prevValue) && (currValue > min))         // decrementing above floor
              {
                  currValue -= inc;
              }
              else if ((currValue > prevValue) && (currValue < max))        // incrementing below ceiling
              {
                  currValue += inc;
              }
              else if (currValue = max) // TODO: this condition doesn't work as expected; control doesn't trap for wrap-around from max to min, vice versa
              {
                  currValue = max;    // hold at max
                  return 1;   // Swallow event to prevent from updating UIR
              }
              else if (currValue = min) // TODO: this condition doesn't work as expected; control doesn't trap for wrap-around from max to min, vice versa
              {
                  currValue = min;    // hold at min
                  return 1;   // Swallow event to prevent from updating UIR
              }
              SetCtrlVal(panel, control, currValue);  // update control with processed value
              prevValue = currValue;  // update state variable
              break;
  
          case EVENT_DISCARD:
              return 0;   // TODO: bug fix for quitting cleanly, so that the code outside of the event switch doesn't execute one last time when the panel is quit.
              break;
  
      }   // end switch
  
      currVoltage =  (currValue * MOTOR_VOLT_STEP) + MOTOR_VOLT_MIN;
      currMotor = LabJackTimer(LABJACK_TIMER0);
      idealMotor = MOTOR_SLOPE * currVoltage;
  
      if (abs((int)(currMotor - idealMotor)) < MOTOR_TOL)
      {
          SetCtrlVal(panel, MAINPANEL_TEXTMSG6, "GOOD");
          SetCtrlAttribute(panel, MAINPANEL_TEXTMSG6, ATTR_TEXT_BGCOLOR, VAL_GREEN);
      }
      else
      {
          SetCtrlVal(panel,MAINPANEL_TEXTMSG6,"FAIL");
          SetCtrlAttribute(panel, MAINPANEL_TEXTMSG6, ATTR_TEXT_BGCOLOR, VAL_RED);
      }
      return 0;
  }
  

  I suggest to put the code SetCtrlVal fragment in a separate function and call this function for the correct event only; at present, it is called for any event, including the event throwing...

  In addition, there is no need to recall the values min/max/inc of your control each time, once the start programme should be enough

• Question about relaxing break: multiple triggersources

  Hello

  I have two digital signals I want to use as the source for the start of the break. The outbreak of the break is done with a triggernode. The problem I have is that I can add two sources to the node, but it will not react on both, only one. So I guess it only accepts one signal. The first triggersignal will start recording for an unknown duration. When the first triggersignal falls, the second trigger signal will follow immediately and continues for 5 seconds. Perhaps there is no need to add a second source of relaxation as the time that the signal must be connected is known and follows directly after the first trigger signal. But I can't seem to find a solution for this.

  Another problem I have is that I connect to a frequency of 100 Hz but on my excel file, I find that 500 samples after 10 seconds of recording. IM connecting signals 2 NI9237 and a NI9219. The NI9237 rate is 2000 Hz but I it decimate to 100 samples per second. The NI9219 signals are recorded at 100 Hz and are intact.

  Thank you

  Found my other problem also. I was break trigger with a virtual channel that was constantly on and outside facil (unknowingly). Up to half the time EMS was not be connected. On the front panel, the check light was still green, but I guess he can't follow the signal so fast.

• Unable to connect to what anyone outside this computer except with IE7.

  Hi, I'm running Windows Vista Home Premium 64 - Bit Edition. This problem is ongoing for months. The main problem is that I'm unable to connect to what anyone outside my laptop unless I use IE7. I can't switch to IE8 because of this problem. I tried it, and as soon as I try to use it, it says that it cannot connect to the internet. Yes, I tried making it an exception in my firewall. I don't have any other third party except AVG Free 8.0 and Malware Bytes software. Another thing about this, is that this problem don't update anything. I can't update AVG, if I never try, it just says that the update failed because it could not establish a connection with the server. This all started when Firefox was suddenly unable to get me on the internet. So I had to start to use new IE because it was the only thing that worked.

  Probably specific problems include:

  iTunes... "iTunes has not to connect to the iTunes store." The network connection timed out. Make sure your network settings are correct and your connection is active, then try again. "iTunes is an exception in the firewall so I do not understand why it cannot connect to the internet.

  AVG Free 8.0... "Break the link with the update failed, please follow these steps."

  Pidgin 2.5.5... "Could not establish a connection with the server connection refused."

  QuickTime... "A connection with the QuickTime server could not be established. This computer might have difficulties to access the internet or the server may be offline. "I'm on the internet I try to update QuickTime!

  Firefox... I can install Firefox but I got nowhere when I try to use it.

  IE... Same thing with Firefox. I use IE7 as it is, but if I try to use IE8, it tells me that I can't connect to the internet.

  Why these programs work correctly when I have a bunch of programs that do? Include programs that work properly: Google Earth, Bittorent, Frostwire. These programs need internet to work. There are even widgets in my sidebar who use the internet and they work fine.

  If anyone can shed some light on my problem, it would be greatly appreciated! Thank you in advance.

  Hi Gary Ellis Mullin II,.

  Please use the forum for Support of Vista,

  From experience, I can say that LimeWire and BitTorrent usually will open your computer up to outside attacks because they are p2p software.  Free version of AVG will only provide a basic protection against viruses.  You might want to try to delete the two programs above, to obtain a full version of AV of your choice and scan your computer.  Many AV maker also have online that you can use to browse your system first scanner.
  If the still persistent problem, a system restore may solve the problem, but you said it's been months.  I don't know if the system restore going back that far.
  Also, did you try to run Windows Update to obtain the latest update for your Windows again?  If this isn't the case, you might want to do.

  System Restore: FAQ

  Let us know if it works for you, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• navigationClick() called when you click outside a field.

  I have the following code below for the Blackberry Storm.  Its purpose is to make a menu screen with originally 4 BitmapFields that can be clicked.  All buttons work properly and regester and respond to the navigationClick() event.  However, if I click outside any field - the navigationClick() event is called on any field has the focus - even if the click is outside this area.

  Any help is appreciated

  SerializableAttribute public class MainMenu extends form {}

  Private MenuScreenLayoutManager menuScreen;
  protected MenuItem activate, soundOff, resume;
  protected UiApplication addix;
      
  public MainMenu (UiApplication addix) {}
  Super(MainScreen.FOCUSABLE |) MainScreen.NO_VERTICAL_SCROLL);
  This.addix = addix;
  LabelField title = new LabelField ("Addix", LabelField.HCENTER |) LabelField.ELLIPSIS | LabelField.USE_ALL_WIDTH);
  setTitle (title);
          
          
  getMainManager () .setBackground (BackgroundFactory.createBitmapBackground (Bitmap.getBitmapResource ("menu_background.png")));

  Set of MenuItem = new MenuItem (MenuItem.PLAY, Bitmap.getBitmapResource ("play_button.png"), Field.FOCUSABLE, this);
  Stats MenuItem = new MenuItem (MenuItem.STATS, Bitmap.getBitmapResource ("stats_button.png"), Field.FOCUSABLE, this);
  Help of MenuItem = new MenuItem (MenuItem.HELP, Bitmap.getBitmapResource ("help_button.png"), Field.FOCUSABLE, this);
  resume = new MenuItem (MenuItem.RESUME, Bitmap.getBitmapResource ("resume_button.png"), Field.FOCUSABLE, this);
  Activate = new MenuItem (MenuItem.SOUND_ON, Bitmap.getBitmapResource ("sound_on_button.png"), Field.FOCUSABLE, this);
  soundOff = new MenuItem (MenuItem.SOUND_OFF, Bitmap.getBitmapResource ("sound_off_button.png"), Field.FOCUSABLE, this);
          
  menuScreen = new MenuScreenLayoutManager();
  menuScreen.add (game);
  menuScreen.add (statistics);
  menuScreen.add (help);
  menuScreen.add (enable);
          
  Add (menuScreen);
  }
      
  private void addResume() {}
  menuScreen.add (curriculum vitae);
  }
      
  private void removeResume() {}
  menuScreen.delete (curriculum vitae);
  }
  }

  class MenuItem extends BitmapField {}
      
  public static final int PLAY = 0;
  public static final int SUMMARY = 1;
  public static final int STATS = 2;
  public static final int HELP = 3;
  public static final int SOUND_ON = 4;
  public static final int SOUND_OFF = 5;
  protected int type;
  private MainMenu mainMenu;

  public MenuItem (int, Bitmap bm, long style, MainMenu mainMenu type) {}
  Super (bm, style);
  This.type = type;
  this.mainMenu = mainMenu;
  }
      
  protected boolean navigationClick (int status, int time) {}
  System.out.println ("Type" + type);
  Field field;
  switch (type) {}
  case 0:
  System.out.println ("Play");
  synchronized (UiApplication.getEventLock ()) {}
  mainMenu.addix.pushScreen (new GameScreen (mainMenu.addix, mainMenu));
  }
  break;
  case 1:
  System.out.println ("Summary");
  break;
  case 2:
  System.out.println ("Stats");
  break;
  case 3:
  System.out.println ("help");
  break;
  case 4:
  System.out.println ("' sound - we '");
  () this.getManager replace (this, mainMenu.soundOff);
  break;
  case 5:
  System.out.println ("sound off");
  () this.getManager replace (this, mainMenu.soundOn);
                  
  break;
              
  }
  Returns true;
  }

  protected void (_g, Boolean _on Graphics) drawFocus {/ * nothing * /}
  }

  class MenuScreenLayoutManager extends VerticalFieldManager {}
      
  MenuItem field private;
  private static val mutable int menuItemsStartPos = 260;
  private static val mutable int menuItemHeight = 41;
  private static val mutable int menuItemWidth = 142;
  Private final int screenWidth = getWidth();
      
  public MenuScreenLayoutManager() {}
  Super(Manager.RIGHTMOST |) Manager.VERTICAL_SCROLL | Manager.VERTICAL_SCROLLBAR);
  }
          
  protected void sublayout (int width, int height) {}
      
  int numberOfFields = getFieldCount();
  int menuXloc = 360-menuItemWidth;
  for (int i = 0; i)< numberoffields="" ;="" i++="">
  field = (i) getField (MenuItem);
  Switch (field.type) {}
                      
  case 0:
  setPositionChild (scope, menuXloc, menuItemsStartPos + (menuItemHeight + 3));
  layoutChild (field, width, height);
  break;
                          
  case 1:
  setPositionChild (scope, menuXloc, menuItemsStartPos);
  layoutChild (field, width, height);
  break;
                          
  case 2:
  setPositionChild (scope, menuXloc, menuItemsStartPos + 2 * (menuItemHeight + 3));
  layoutChild (field, width, height);
  break;
                          
  case 3:
  setPositionChild (scope, menuXloc, menuItemsStartPos + 3 * (menuItemHeight + 3));
  layoutChild (field, width, height);
  break;
                          
  case 4:
  case 5:
  setPositionChild (on the ground, 70, menuItemsStartPos + 3 * (menuItemHeight + 3));
  layoutChild (field, width, height);
      
  }
                      
  }
  setExtent (360, 460);
  }
  }

  It is one of the many design flaws (IMO) of the key on the blackberry event. What you get is by design.

  If you click anywhere on the screen where there is no field under the point of click, the click event will be dispatched on the ground right now with the update. You should override the touchEvent and write a 'isWithinBounds' method that checks just as the x and are coordinated are less than the width and the height of the field.

  The key event is within the limits of the field on which it is called, you handle if you ignore it.

• Hub topology and talk: can I traffic Internet road to PC at a radius of the site through the tunnel and NAT outside in the world on the 5520 hub?

  I don't know if it can be made to work or not, or if it's a mutually excluded NAT configuration that is not possible, but I have a 5520 ASA to my site central office with a fiber of 20Mbps Internet streams and two remote offices with ASA 5505 devices connected via DSL or cable modem and have finally got from Site to Site "spoke" VPN upward tunnels and run with the ability to route traffic to through a 'hairpin turn' speak-to-Spoke on the Hub Site 5520.

  I have desktop PC at each remote site speaks A & B that need to communicate directly with them to support a small group of work-style of the software point of sale that is actually hosted on a remote site A PC.

  PC on two remote sites must also be able to communicate with a credit card processing by the public Internet service, and I wish have the ASA 5505 units in each block of remote office as all traffic directly NAT'ed from each respective out on the local LAN PC straight Internet above each site cable modem or DSL modem. I want to force these PCs need to NAT their Internet-destination back through the ASA 5520 traffic located at the Home Office, on the VPN tunnels. In other words, I want the cable modem and DSL connections to route traffic strictly VPN encrypted to the Home Office and also behave like routers NAT for the local PC it.

  I can kill the 5505 prevents NAT for PCS in remote offices simply removing the rule dynamic NAT factory default for 'everything', but then I can't understand how to get my 5520 central to perform NAT which required of the remote PCs to talk to their service of Internet credit card processor without breaking the configs "NAT-free" necessary for VPN traffic to spoke-to-spoke to work. If I'm trying to put an entry static or dynamic NAT for a remote desktop on my 5520 ASA central, it breaks the VPN tunnel so that PC specific.

  Is that what I want to accomplish even possible with the ASA?

  Hi Neal,

  Yes, it's quite possible! below is a loss of things you need to do:

  (1) make sure of course on both the 5505 s of the ASA, you send ALL traffic from the local network through the VPN.

  (2) as Andrew mentioned, have the 'same-security-traffic permit intra-interface' command on the ASA 5520.

  (3) you do not have to have a configured proxy server, but it is also a good solution. But to make it work without her, assuming that the ASA 5505 remote subnets 192.168.1.0/24 and 192.168.2.0/24, add the config lines below to the ASA 5520:

  NAT (outside) 1 192.168.1.0 255.255.255.0

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Global 1 interface (outside)

  Please note that 1 id, and the interface can be replaced according to the configuration you already have in place in the ASA 5520.

  I don't know what kind of NAT exemptions are at the origin of the questions for you, but if you can put a sanitized one of your ASA 5505 and ASA 5520 config, I can make suggestions concerning the exact configuration.

  Let me know if it helps!

  Thank you and best regards,

  Assia

• My file has plenty of empty space 'outside' of the work plan that I can't get rid of? How to crop the file to the artboard size real?

  

  Above is my plan of work and space to work, but when I try to resize the image (or save it in jpeg format to show the problem I have) there is a ton of white space outside the artboard and the crop tool and two work plan tool say that my file is not as large as the size above , but its been as big as the screenshot below.

  

  I can't find anyone else having this problem. Am I the only one? How can I solve this problem? It is to be a huge problem for web design. And he did it for all of my projects as web design he updated to have work plans.

  Hi Nicole,.

  I'm sure that it is a problem that we followed. We have not addressed it yet, but it's on our list of things to fix.

  Plan of work documents have a canvas in auto-expand; This is part of the user experience, which gives a feeling of infinite to the document; You can place things anywhere in the view, and they should remain visible no matter where you drag. In order to maintain this illusion, paint us the entire surface to mate with the same color outside work plans.

  Hide us this canvas from you, even if it's still there. You can see how big it is at any time by choosing "Image > canvas... size. ». That size will change as things move around, getting bigger and smaller than necessary. The hidden canvas size will break to the next more or less 'limit of diamonds", which is nominally in increments of 1024 pixels. This is done for performance.

  The problem is that the export code is really not updated as the work plans can develop and reduce the canvas. When you export a document of work plan, it looks at the current size of the Web and uses only. That's why you get that extra white space. This extra space problem happens also for other things, like thumbnails of document. We agree it's pretty boring, and as I said, it's on our list to fix.

  Try this workaround:

  1. download your ready to export document.

  2. in the work plan tool, select the gear icon (top tool bar, far right) and uncheck auto-size canvas

  3. Select the Rectangle tool and cover the artboard from edge to edge. (Snap allows here)

  4. Select the crop option. This can reduce the canvas to just the boundaries of the artboard.

  5 export under..., choose your format, for example PNG. and export.

  6. don't check any extra white space.

  Note that "Web auto-size" is a property of document-sticky and is saved with the document.

• How to hide nodes outside their container (overflow)?

  Hello everyone,
  Is there a way to make the knots to not display when they are outside their container (usually I use groups)?
  similar to the CSS property (overflow: hidden).
  Thanks for any help.

  Set a clip on the nodes, or place them in a scroll pane or a maximum size on them.

  Why usually use a group, most of the JavaFX applications would normally use subclasses of component or the region for the implementation in?

  JavaFX 2.2 CSS isn't really apply for currently available.

  If you post an executable code that produces a situation of overflow, someone could probably offer you a modified version which is part of the node as you wish.