Question about relaxing break: multiple triggersources

Similar Questions

• Question about multiple accounts on a single Machine

  Hello

  I have a question about the ability of the creative cloud to be used with multiple users. If we have computers in a lab that are shared machines and each student must buy their own creative cloud for its use. How to set the connection and activation of the account of each student?

  I'm new to creative cloud as well as it has been my understanding as long as its operation...

  Although it is branded as cloud base, the software is downloaded and installed locally

  Students between their Code to activate the application they wish to use...

  This model works if the student is using the software on their own machines, but how does it work if several students with multiple accounts share the same computer?

  If we install the software on the machines for them, is it possible for students to simply enable and disable the software as they go or is this a model that simply does not work.

  Thanks for any help you can provide,

  Hello

  Ask want you many to contact Adobe support for help and information:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• Multichannel relaxing break

  Hello world

  I am a beginner with LabView. I'm able to acquire several analog signal of my PCI 6221 using DAQ Assistant, but my requirement is to measure only all my entries with relaxing break for example I need to acquire data only when my example PFI10 is Hawaii. Whenever the PFI10 is Lo, the break of the measure.

  I found an example to reach the break here. However, it is only for 1 channel unfortunately. I do not understand about the flow, but I tried several times to add another channel to my purchase, but without success. Maybe my knowledge is limited and only able to start the project of the DAQ Assistant, but not this type of project.

  I tried to add another channel to DAQmx create Virtual Channel.vi but he couldn't accept two inputs. Maybe I need some kind of multiplexer?

  If the question above can be done, how do I add another measure DAQx Read.vi inside the while loop?

  Can someone tell me how to add channels (I need at least another 2 analog channels) on this vi? I think, any other user who are in the early phase like me will all benefit your respons.

  Sincere greetings,

  Hague

  Hello

  Found the solution (vi attached). But it is only from 2 channels.

  Kind regards

  Hague

• DAQmx: With relaxing break pulse blocking

  I have a NI 9401 module in a chassis 9171 and stand at the door of the output of a counter with the release of another counter. 1 meter (the signal to be blocked) generates a 3 Mhz signal and meter from 0 (the door) generates a 10 Hz signal that is sent outside to door pin of 1 meter. I expect this would be counter 1 door signal to produce the 3 Mhz flashes only when the counter 0 is high, but the wiring had no effect on the output of the 1 meter, it has always generated a continuous pulse train of 3 Mhz.  I found that a code is necessary to get a counter to pay attention to the signal to his door pin (this message was particularly useful) and it can be done with the node property relaxing break. After you have configured the node, however, I fell into this error:

  Error-20124 occurred at DAQmx start Task.vi:2
  Lines 4 to 7 of this port are configured for the entry. Cannot configure these lines for output at this time.

  I'm quite puzzled by the present.  The problem seems to come try it designate 5 PFI ('CTR 1 door' on the 9401) as the source of relaxing break.  If anything, I think the error would be that lines 4-7 are configured for output, since these lines are grouped under CTR 1, which is configured as a channel of CO to generate the 3 Mhz pulse train, and the definition of line 5 as the break source changes the configuration on an entry.  Looking for this error in the forums OR and Google isn't pulling up of troubleshooting information.  I tried to create a task to configure line 5 as a separate digital input channel, but then I get the error saying (error-200125) opposite that lines 4-7 are configured for output and cannot be configured at the entrance, to make things more confusing.

  Any thoughts would be appreciated.  I'm afraid I'm missing something obvious about blocking the impulses or CO channel configuration as I continue to read that one of the benefits of DAQmx on Legacy DAQ, is that it makes easier routing signal.  I'm using LabVIEW 2012 (32 bit) with DAQmx 9.5.5 installed.

  Hi agoncalves,

  I took a glance at your VI and I see two immediate problems:

  1. it is not guaranteed that the two tasks will be reserve before the start of each one.  This explains your error and why it seems confusing.  The 9401 is configurable nibble, but you cannot change the direction while the device is being used (why the reserves are important).  The module starts with two nibbles the input value.  Your first task causes an exit so it switches direction on one of them.  When your task is committed (started), it hangs in this configuration.  The second task then also try an output drive, but on the other nibble that is entered and can not be activated because the first task is currently running.  The solution is to use the thread of the error to force the order of execution (or use a flat sequence structure).

  2. you won't run out of problems with your trigger signal unless that connected you to a separate entrance (and put the two trains of pulses on the nibble even).  You can change that by setting the property of canal CO. Pulse.Term. that's if you want to spend your signal through a few circuits external and back in.  If you use the signal directly, you can just use it internally.  By example/cDAQ1Mod1/ctr0InternalOutput

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• Question about Dell OEM: SLP Windows 7 Installation disk domestic; can it be installed and activated on other computers from Dell?

  I bought a Dell installation disk and I want to use it to install a better version of Windows on my Dell PC. I have windows Vista and I want to use it to update my OS Windows7 Home Premium. However, the license type is SLP:OEM and no detail... not sure what SLP: OEM means... I thought that the OS discs are the same. Someone told me no retail editions are not suitable for a new OS, but I'm confused. The disc says, Windows 7 Home premium 64-bit, but didn't holograms who have all MS OS disks and the disk is labeled for use with a Dell system only, if the means it will work very well on my Dell PC? The label does not which brand or model this disc is for, but said only for the Dell PC which is my PC. I'm assuming, the disk won't work on all Dells, maybe someone can offer suggestions, any help is much appreciated. Thank you!

  I have a few other questions about Windows 7, can I ask you about this on your Web site? Do not know how to contact you on your website. I can see other people responding to your articles, but that's all. I thought that maybe their might be a forum to post a question... Thank you for everything.

  You can comment on my site but comments will be public and it is easier to answer questions in the forums.

  If you want to be more precise, you can post in the Dell Community Forums. :

  http://en.community.Dell.com/support-forums/software-OS/

  There are also ways to private message me there is something I don't think that can be done by non-moderateurs on Microsoft Answers. However, I prefer answering questions on the forum:

  http://en.community.Dell.com/members/natakuc4

  Concerning the compatibility with Windows 7, I have listed a full pilot system here compliment:

  http://dellwindowsreinstallationguide.com/driver-sets/Inspiron-desktops/Inspiron-518-Windows-7-64-bit/

  Theres nothing to worry about your circuit board, the only driver who can break your system's BIOS update. I only list the last official update BIOS list Dell in my unofficial driver sets.

  The webcam should be covered by Dell Webcam Central but what is the monitor?

  http://ftp.Dell.com/Monitors/Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe

  The main difficulty is to get a genuine product key Windows 7 64 bit. The time now it's easier to buy the 64-bit Windows 8.1. No matter if you buy Windows 7 or 8.1 64-bit both going to Windows 10 free when the RTM is out.

• Small questions about Dataguard

  Hello

  I have a few questions about Dataguard. I'm new to DG, carry me so for the display of these fundamental questions:

  We plan to install Oracle 12 c to Win 2012 R2 with primary and physical intelligence on different physical servers. We are looking for HA solution, but cannot afford to license CARS. The two primary & Eve are going to be in the same data center connected via a 1 gigabit network. So I have a few questions related to it.

  (a) since both of our primary & Eve is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  (e) I was reading about the modes of Protection, account required to our current situation & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Concerning

  Learner

  (a) since both of our main & secondary is going to be in the same data center with good connectivity. Can I assume that although Data guard is more DR solution, in our case it would be HA solution since we have no network latency.

  Well it will not provide the level of HA that is RAC. RAC is a Transparent Application failover. With a physical standby, you need to apply some delay for a failover operation. You can implement the observer that can automate the failover and reduce the time.

  (b) is it safe to assume that where primary fails, then the day before can automatically take the role of primary education without any manual intervention, possibly using Dataguard broker?

  This isn't really the DG broker, but rather the observer you will need to implement. The DG broker automate failover. It will be the observer who "sees" (where its name) that the principal is down and initiate the failover process. To do this, the observer will use the DG broker, so it will be necessary.

  (c) so I understand that where primary breaks down, the existing connections transfer automatically from primary to standby db (most recent primary), but how my web based java application will know that more recent connections must be sent to the standby db Server (more recent primary)? I guess net Oracle has a provision to handle this? Who can be automated?

  You'll want to read on the QuickStart failover. http://www.Oracle.com/technetwork/articles/smiley-fsfo-084973.html

  (d) given that I have only 2 physical servers, can I deploy broker Dataguard on a normal PC (since it is a thin client) assuming the PC is kept in the data center and is online 24/7?

  The DG broker is required to run on the database server. The DG broker will run on the primary and standby. I think that what you're asking really anything is if the observer can run on a PC. Yes it can. However, it is probably not a good idea. A PC will not have the internal hardware redundancy, a server can have. If the PC can fail more often than to a server. And if the gods are bad, it will fail when you most need.

  (e) I was reading about the modes of Protection, account required to our current scenario & infrastructure, I choose 'Maximum availability Mode' instead of 'maximum Performance '.

  Your choice should depend on the amount of data loss is acceptable.

  (f) what is your point of view about Oracle integrated security? I hear too much on Oracle failsafe, because people generally go to a combination of CARS & dataguard for HA? We have a few additional storage that can be shared between the two servers, but I feel with literally no DG network latency can provide us HA.

  Oracle integrated security only works on Windows with a MS Failover Cluster. Real DBAs do not have Oracle on MSFC.

  See you soon,.
  Brian

• Question about cloud connectors

  We try to create a cloud to Eloqua connector. I read the CloudConnectorSampleGuide. I have a few questions about the expected data models and models of general implementation.

  Configuration of the connector of the cloud

  • The CC stores the identification information for each configured CC step Eloquya Eloqua?
    • What are the guidelines for the safe password storage? (I can't store the passwords as dirty one-way-hash that I need the password during execution.  The two-way hash gives an illusion of security but is not better than the plaintext).
  • When the CC is configured, where credentials should take place between the 1st and the 2nd screen? (i.e. as a hidden form field, session cookie cookie/etc.)
  • Eloqua warns the CC when a step is deleted?

  Cloud connector performance

  • What is the average number of steps configured Single that manages the CC?
  • Is it possible for a CC to have 1000 s and unique not configured to query?
  • What are the guidelines for scalability when the connector has to travel 1000 steps configured and survey? The CC requires a worker architecture to manage a large number of configured steps?
  • Are there best practices around the CC recovery hangs
    • For example: CC acquires the State waiting for members and moves to the current State. The CC blocks before the end of the stage. What is the approach suggested for

  recovery of the tasks in the current handling during recovery state? (assuming I have multiple instances of CC of the Eloqua poll). Is the connector of cloud supposed to maintain States of WIP to manage recovery correctly?

  Dmitry, once again, it is entirely to the developer.  When you add contacts to a stage, they will be processed in batches.  There is no limit to how much you add, and since they are left to step up to that dealt with by the connector, how long they sit depends on how long your connector takes to do its job.  Expectations, of course the faster you can deal with the best.

• (Basic) question about layers

  Hi all!

  I'm a little Photoshop-beginner and I have a question about layers, just as the title suggests. I have a bunch of PNG files which are the design of what happens in the UI (user interface) for an app Anyhow, I need to break down each graphic element in the files (for example, the logos, the "buttons", the small images) in different layers. How this is done more efficiently?

  Any help would be much appreciated and I hope that I have explained the task well, but if you need additional information about the files or the task, I will be happy to provide that.

  Thanks in advance,
  EM

  Use the Quick Selection tool to select each item and then press Ctrl + J (Cmd + J) that will create a separate layer. You can select with the rectangle selection rectangle if you want straight borders. Each item will have a transparent background which will allow you composite with other pictures or blank documents. Click on the symbol of the eyeball in the layers palette to the right to turn on and off and then you can view layers individually.

• I have a question about Adobe TDC license on two devices.

  I have a question about Adobe TDC license on two devices.

  I want to use Adobe of the COMMON tariff on both devices.

  and I heard that it is possible.

  but I need an official document from Adobe.

  You know this part please address the link or documents, please.

  Thank you.

  Best regards.

  Hello

  You can install and activate a license creative cloud on 2 computers, regardless of their operating system. But you must use one at a time, in other words you should not share your license with another user. A license is for a user that can be used in different places as the home and office.  However, creative team of cloud subscription, you can have multiple licenses under a subscription that you can assign to users. You can consult the following links. Answer to your question is mentioned in the first link.

  Adobe Creative Cloud FAQ

  Licensing and terms of use | Adobe

  You can also check the following links for creative team of cloud and management licenses

  Creative cloud for teams. Adobe Creative Cloud for businesses

  Manage your cloud of Adobe Creative for the composition of teams

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• Question about CPU Ready time %

  Hello Vmware experts.

  Small question about time loan cpu in esxtop. I have a couple of the virtual machine that has been entrusted to 4 vCPU. When you view their stats in esxtop they indicate the highest term of loan from CPU. I was wondering if this figure is the result of adding the ready time of each vCPU? For example, a 4 x vCPU VM with ready time of 10%, does it really mean 2.5% by vCPU? Should I be concerned about ready time of 10%? I read that the multiple assignment of vCPU can unnecessarily cause time CPU ready. How others decide on how many vCPU they must assign to VM here?

  OK, just realised that was more than just a small question... anyway, would be great if someone could make all this a bit clearer for me.

  Thank you

  BTW, my hosts CPU usage to sit at an average of 25%.

  In vSphere they eased the scheduling of multiple vCPU co even more so that only the vCPU who got ahead of the rest is stopped.  It is always advisable to start with a single vCPU and work your way up if necessary.

  In esxtop you can use the e command to extend the CPU statistics.  In several vCPU machines this will let you see the playing time of each CPU (which should add until you have seen earlier) and it will also allow you to see the % used for each processor.  This should allow you to see if the two vCPU are properly used in a box of vCPU multi.   I had also the CSTP % field shows which is the stop of co and will give you an indiciation of how often vCPU on the machine stopped to allow the other CPU to stand.

  Great pdf on the CPU scheduler in vSPhere can be found here http://www.vmware.com/files/pdf/perf-vsphere-cpu_scheduler.pdf

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• A question about license Eula agreements

  Hello:

  I have a question about the license agreements (EULA end user). Could someone figure this out for me?

  My question is, what is the significance of the AE6 2.1.7.2 EULA?

  EULA - after effect 6 download link: http://www.adobe.com/products/eulas/pdfs/Gen_WWCombined-MULTI-20111031_1230.pdf

  2.1.7 use of server

  2.1.7.1.

  2.1.7.2... (e) for operations not initiated by an individual user (for example, the server automated processing).

  Everything (e), means that I can't start automatically processes via the AE AE script? That's what I'll do below.

  There will be a few AE works in the work list (DB), my script would read the list, and then automatically start program main AE,.

  After some processes, the work will be done. The script should continue to work until all the works being completed.

  What is a legal way to use AE?

  Thank you.

  Neil

  As far as my understanding of the legal points will: No. you would breach 2.1.7.1 and also on some level 4.7 and 4.8 break - Amazon is not your local network and since otehrs can access the server outside the number of permits users who could carry some influence in the judgememnt. Anyway, I'm not a legal expert by any means. However, technical obstacles remain: AE and SOUL do not necessarily play with the server because of CoDecs software, licenses and other things system level get involved Server security mechanisms can stop working...

  Mylenium

• A question about type

  Okay, at the risk of exposing me like a complete jerk, I need to ask a question about type.

  I use Fireworks CS4 to design a website of 40 to 50 pages. Most of the site is composed of ten stories, each taking two to five pages of the site. I use ghraphic and pictures to break up the grey type and illustrate the words. I anticipate using 14pt Arial for my policy. The text will be displayed on a 'unique' (that is to say, not repetitive) texture.

  I put on my pages with photos and other graphics, and I glued the type of original stories around the images. (I don't use Lorem ipsum for text space booked because I wanted an accurate measure of the screw-the-page notice words.) In other words, I wanted to be sure that everything fit and don't let no troublesome space at the end).

  I know that I do not export the type with images in Dreamweaver. I'll remove the text in Fireworks when I export, then paste it in Dreamweaver so that the pages appear as I have originally designed the.

  However, my question is this: If a reader opens one of my pages with his default computer to, say, 12pt Verdana, if it screws up the layout of my page? As I said above, I have designed the pages at Arial 14 pt. If the type will flip off my pages - or type will inches less on a page - if the Player browser is set to a different font size or point? If Yes, what can I do to make my pages (or contraction) to adjust the reader his reading preferences?

  Thanks again for your help. Of course happy that I do not use my real name on it.

  When you write the HTML code, you place the images next to the paragraphs they are associated if the police or the window changes size, then the whole of the document is redéroule, but logically, everything to its planned place. This can be frustrating for people who are used to define exactly where the images appear with respect to the text and even kerning and spacing to make a line "so." You will have awkward gaps somewhere, let it go... let the way you free from this concern.

  Everything is in a box, however. In this box, you can put images repetitive or expandable. So yes, you can put a background behind the text, no repetitive image on each of your pages and you should be able to set the box so that duplication of the background image will not appear if it is larger than the active area. (I think it would be in the CSS overflow divs property... you'd have to check).

  Here are some tutorials using broad, non-repetitive background images for the page. You could adapt the technique to a content div:

  http://Line25.com/tutorials/basic-Web-page-background-techniques-with-CSS (scroll down)

  http://www.WebDesignerWall.com/tutorials/how-to-CSS-large-background/

  On the other hand, however, lines of text that are more than 2 to 2.5 wide alphabets are difficult to analyze. If your site is intended to be text-heavy, you might be better off with a fixed width for your text box.

  I think that the comment the blogger relates using Fireworks Slicing page to export HTML code, which gives you a fixed design, based on a table. The HTML code, you can export FW is not for live sites. It's just for prototyping. It is better to use CSS for layout, rather than tables, because the code is easier to maintain. I came across this interesting tutorial (the author uses Photoshop, but any graphic program works if you want to follow along):

  http://NET.tutsplus.com/tutorials/HTML-CSS-techniques/design-and-code-your-first-website-i n-easy-to-understand-steps.

  (I hope this helps you!)