L2L full Tunnel

Hello

I'm curious to know if there is a way to make a complete tunnel for an L2L option. I need to have Internet all traffic through a reliable Internet connection. I know I can do this practice GRE over IPSec, but was hoping for an alternative solution.

Thanks in advance

-Chris

Hey Killian,

When you create a LAN-to-LAN tunnel, you set the protected in the ACL crypto traffic, so if you do not want to send all traffic through the LAN-to-LAN tunnel, then follow these steps:

HostName (config) # ip 192.168.0.0 allowed extended access list l2l_list 255.255.0.0 any

HostName (config) # crypto abcmap 1 match address l2l_list map

192.168.0.0/16 corresponding to your LAN.

HTH.

Portu.

Please note all useful posts

Tags: Cisco Security

Similar Questions

  • ASA 8.6 - l2l IPsec tunnel established - not possible to ping

    Hello world

    I have a problem of configuration of the CISCO ASA 5512-x (IOS 8.6).

    The IPsec tunnel is created between ASA and an another non-CISCO router (hereinafter "router"). I can send packets ping from router to ASA, but ASA is NOT able to meet these demands. Sending requests of ASA is also NOT possible.

    I'm trying to interconnect with the network 192.168.2.0/24 (CISCO, interface DMZ) premises and 192.168.3.0/24 (router).

    The CISCO ASA has a static public IP address. The router has a dynamic IP address, so I use the dynamic-map option...

    Here is the output of "show run":

    ---------------------------------------------------------------------------------------------------------------------------------------------

    ASA 1.0000 Version 2

    !

    ciscoasa hostname

    activate oBGOJTSctBcCGoTh encrypted password

    2KFQnbNIdI.2KYOU encrypted passwd

    names of

    !

    interface GigabitEthernet0/0

    nameif outside

    security-level 0

    address IP X.X.X.X 255.255.255.0

    !

    interface GigabitEthernet0/1

    nameif inside

    security-level 100

    the IP 192.168.0.1 255.255.255.0

    !

    interface GigabitEthernet0/2

    nameif DMZ

    security-level 50

    IP 192.168.2.1 255.255.255.0

    !

    interface GigabitEthernet0/3

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/4

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface GigabitEthernet0/5

    Shutdown

    No nameif

    no level of security

    no ip address

    !

    interface Management0/0

    nameif management

    security-level 100

    IP 192.168.1.1 255.255.255.0

    management only

    !

    passive FTP mode

    internal subnet object-

    192.168.0.0 subnet 255.255.255.0

    object Web Server external network-ip

    host Y.Y.Y.Y

    Network Web server object

    Home 192.168.2.100

    network vpn-local object - 192.168.2.0

    Subnet 192.168.2.0 255.255.255.0

    network vpn-remote object - 192.168.3.0

    subnet 192.168.3.0 255.255.255.0

    outside_acl list extended access permit tcp any object Web server

    outside_acl list extended access permit tcp any object webserver eq www

    access-list l2l-extensive list allowed ip, vpn-local - 192.168.2.0 vpn-remote object - 192.168.3.0

    dmz_acl access list extended icmp permitted an echo

    pager lines 24

    asdm of logging of information

    Outside 1500 MTU

    Within 1500 MTU

    MTU 1500 DMZ

    management of MTU 1500

    ICMP unreachable rate-limit 1 burst-size 1

    don't allow no asdm history

    ARP timeout 14400

    NAT (DMZ, outside) static static vpn-local destination - 192.168.2.0 vpn-local - 192.168.2.0, 192.168.3.0 - remote control-vpn vpn-remote control - 192.168.3.0

    !

    internal subnet object-

    NAT dynamic interface (indoor, outdoor)

    Network Web server object

    NAT (DMZ, outside) Web-external-ip static tcp www www Server service

    Access-Group global dmz_acl

    Route outside 0.0.0.0 0.0.0.0 Z.Z.Z.Z 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    timeout tcp-proxy-reassembly 0:01:00

    Floating conn timeout 0:00:00

    dynamic-access-policy-registration DfltAccessPolicy

    identity of the user by default-domain LOCAL

    Enable http server

    http 192.168.1.0 255.255.255.0 management

    No snmp server location

    No snmp Server contact

    Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

    IKEv1 crypto ipsec transform-set ikev1-trans-set esp-3des esp-md5-hmac

    Crypto ipsec ikev2 proposal ipsec 3des-GNAT

    Esp 3des encryption protocol

    Esp integrity md5 Protocol

    Crypto dynamic-map dynMidgeMap 1 match l2l-address list

    Crypto dynamic-map dynMidgeMap 1 set pfs

    Crypto dynamic-map dynMidgeMap 1 set ikev1 ikev1-trans-set transform-set

    Crypto dynamic-map dynMidgeMap 1 set ikev2 ipsec-proposal 3des-GNAT

    Crypto dynamic-map dynMidgeMap 1 life span of seconds set association security 28800

    Crypto dynamic-map dynMidgeMap 1 the value reverse-road

    midgeMap 1 card crypto ipsec-isakmp dynamic dynMidgeMap

    midgeMap interface card crypto outside

    ISAKMP crypto identity hostname

    IKEv2 crypto policy 1

    3des encryption

    the md5 integrity

    Group 2

    FRP md5

    second life 86400

    Crypto ikev2 allow outside

    Crypto ikev1 allow outside

    IKEv1 crypto policy 1

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    management of 192.168.1.2 - dhcpd address 192.168.1.254

    enable dhcpd management

    !

    a basic threat threat detection

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    WebVPN

    internal midgeTrialPol group policy

    attributes of the strategy of group midgeTrialPol

    L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2

    enable IPSec-udp

    tunnel-group midgeVpn type ipsec-l2l

    tunnel-group midgeVpn General-attributes

    Group Policy - by default-midgeTrialPol

    midgeVpn group of tunnel ipsec-attributes

    IKEv1 pre-shared-key *.

    remote control-IKEv2 pre-shared-key authentication *.

    pre-shared-key authentication local IKEv2 *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    maximum message length automatic of customer

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect esmtp

    inspect sqlnet

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    Review the ip options

    !

    global service-policy global_policy

    context of prompt hostname

    no remote anonymous reporting call

    Cryptochecksum:fa02572f9ff8add7bbfe622a4801e606

    : end

    ------------------------------------------------------------------------------------------------------------------------------

    X.X.X.X - ASA public IP

    Y.Y.Y.Y - a web server

    Z.Z.Z.Z - default gateway

    -------------------------------------------------------------------------------------------------------------------------------

    ASA PING:

    ciscoasa # ping DMZ 192.168.3.1

    Type to abort escape sequence.

    Send 5, echoes ICMP 100 bytes to 192.168.3.1, time-out is 2 seconds:

    ?????

    Success rate is 0% (0/5)

    PING from router (debug on CISCO):

    NAT ciscoasa #: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

    NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

    NAT: untranslation - outside:192.168.2.1/0 to DMZ:192.168.2.1/0

    Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 0 len = 40

    Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 1 len = 40

    Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = 2 len = 40

    Outside ICMP echo request: 192.168.3.1 DMZ:192.168.2.1 ID = 3859 seq = len 3 = 40

    -------------------------------------------------------------------------------------------------------------------------------

    ciscoasa # show the road outside

    Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP

    D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

    N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

    E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP

    i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone

    * - candidate by default, U - static route by user, o - ODR

    P periodical downloaded static route

    Gateway of last resort is Z.Z.Z.Z to network 0.0.0.0

    C Z.Z.Z.0 255.255.255.0 is directly connected to the outside of the

    S 192.168.3.0 255.255.255.0 [1/0] via Z.Z.Z.Z, outdoors

    S * 0.0.0.0 0.0.0.0 [1/0] via Z.Z.Z.Z, outdoors

    -------------------------------------------------------------------------------------------------------------------------------

    Do you have an idea that I am wrong? Probably some bad NAT/ACL I suppose, but I could always find something only for 8.4 iOS and not 8.6... Perhaps and no doubt I already missed the configuration with the unwanted controls, but I've tried various things...

    Please, if you have an idea, let me know! Thank you very much!

    Hello

    I've never used "global" option in ACL, but it looks to be the origin of the problem. Cisco doc.

    "The global access rules are defined as a special ACL that is processed for each interface on the device for incoming traffic in the interface. Thus, although the ACL is configured once on the device, it acts as an ACL defined for Management In secondary interface-specific. (Global rules are always in the direction of In, never Out Management). "

    You ACL: access-list extended dmz_acl to any any icmp echo

    For example, when you launch the ASA, there is an echo response from the router on the external interface--> global can block.

    Then to initiate router, the ASA Launches echo-reply being blocked again.

    Try to add permit-response to echo as well.

    In addition, you can use both "inspect icmp" in world politics than the ACL.

    If none does not work, you can run another t-shoot with control packet - trace on SAA.

    THX

    MS

  • internal hosts cannot access the internet w / L2L configured tunnel

    The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.

    We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.

    interface outside

    IP address x.x.x.68 255.255.255.240

    NAT-control

    Global x.x.x.69 - x.x.x.77 2 (outdoor)

    Global 1 x.x.x.78 (outside)

    NAT (inside) 0 access-list sheep

    NAT (inside) 1 10.10.10.0 255.255.255.0

    public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255

    internal access-group interface inside

    Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1

    internal to the 10.10.10.0 ip access list allow 255.255.255.0 any

    ! Remote LAN is 192.168.10.0/24

    access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0

    Can you post a "show sysopt run?

    Try this command to enable proxy arp.

    No outside sysopt noproxyarp

  • Downtime in the L2L VPN tunnel

    is there a way to reduce the timeout on a L2L tunnel, so that it disconnects after a specific period of no traffic intresting?

    Thank you

    Here's a URL that describes how to adjust life IPSEC security association.  The default value is 1 hour.   HTH

    http://www.Cisco.com/en/us/docs/iOS/12_2/Security/command/reference/srfipsec.html#wp1017619

  • Cisco ASA - l2l IPSEC tunnel two dynamic hosts

    Hello

    I have two firewall Cisco ASA an i want to made a l2l between two ipsec tunnel, the problem is that both parties have a dynamic IP, on both sides I have configured dyndns, can I did an ipsec tunnel using dyndns name such as address peer?

    Hello

    ASA supports only the RFC compliant method for updates used with dynamic DNS, not updates HTTP, such as dyndns.org and others use.
    i.e. https://tools.cisco.com/bugsearch/bug/CSCsk25102/?reffering_site=dumpcr

    On ASA, it is not possible to configure the tunnel between two dynamic peers.
    You will need to have a static end to configure static to dynamic IP.

    For routers, you can follow this link.
    I hope this helps.

    Kind regards
    Dinesh Moudgil

    PS Please rate helpful messages.

  • WCCP and ASA L2L VPN Tunnel

    How L2L WCCP vpn tunnel? If there is a Web page on the otherside of the tunnel that I need access on ports 80 and 443, it goes through the process of WCCP. How will I know the traffic through the tunnel for 80 and 443 to ignore the WCCP?

    Hello

    I have not had to deal with WCCP on the SAA configurations as it, but to my knowledge, this could be done in the ACL that is used in configuring WCCP on the SAA.

    I mean a single montage we have has an ACL that simply bypasses the WCCP for some destination addresses.

    The ACL was originally for example

    WCCP ip access list allow a whole

    Then we had to stop it for some destination network and we would add a Deny statement at the top of the ACL

    access-list 1 deny ip WCCP line any 10.10.10.0 255.255.255.0

    -Jouni

  • L2l VPN tunnel is reset during the generate a new IPSec key

    I have a tunnel VPN L2L that resets completely, start with Phase 1, at the expiration of the timer of the IPSec Security Association.  Although there are several SAs, it always resets all of the tunnel.

    I see the following in the log errors when this happens:

    03/06/2013 12:54:41 Local7.Notice ipRemoved June 3, 2013 12:54:41 LKM-NVP-L2L-01: % 713050-5-ASA: Group = ipRemoved, IP = ipRemoved, completed for the ipRemoved peer connection.  Reason: Peer terminate Proxy remote n/a, Proxy Local n/a

    03/06/2013 12:54:41 Local7.Notice ipRemoved June 3, 2013 12:54:41 LKM-NVP-L2L-01: % 713259-5-ASA: Group = ipRemoved, IP = ipRemoved, Session is be demolished. Reason: The user has requested

    03/06/2013 12:54:41 Local7.Warning ipRemoved June 3, 2013 12:54:41 LKM-NVP-L2L-01: % ASA-4-113019: Group = ipRemoved username = ipRemoved, IP = ipRemoved, disconnected Session. Session type: IKE, duration: 4 h: 00 m: 06 s, xmt bytes: 260129, RRs bytes: 223018, reason: the user has requested

    03/06/2013 12:55:33 Local7.Notice ipRemoved June 3, 2013 12:55:33 LKM-NVP-L2L-01: % 713041-5-ASA: IP = ipRemoved, IKE initiator: New Phase 1, Intf inside, IKE Peer ipRemoved local Proxy 204.139.127.24 address, address remote Proxy 156.30.21.200, Card Crypto (L2LVPN)

    03/06/2013 12:55:33 Local7.Notice ipRemoved June 3, 2013 12:55:33 LKM-NVP-L2L-01: % 713119-5-ASA: Group = ipRemoved, IP = ipRemoved, PHASE 1 COMPLETED

    Local7.Notice ipRemoved June 3, 2013 03/06/2013-12:55:33 12:55:33 LKM-NVP-L2L-01: % 713049-5-ASA: Group = ipRemoved, IP = ipRemoved, the security negotiation is complete for LAN - to - LAN Group (ipRemoved) initiator, Inbound SPI = 0x9213bdc9, outbound SPI = 0x1799a099

    03/06/2013 12:55:33 Local7.Notice ipRemoved June 3, 2013 12:55:33 LKM-NVP-L2L-01: % 713120-5-ASA: Group = ipRemoved, IP = ipRemoved, PHASE 2 COMPLETED (msgid = b8a47603)

    03/06/2013 13:02:11 Local7.Notice ipRemoved June 3, 2013 13:02:11 LKM-NVP-L2L-01: % 713041-5-ASA: Group = ipRemoved, IP = ipRemoved, IKE initiator: New Phase 2, Intf inside, IKE Peer ipRemoved local Proxy 204.139.127.71 address, address remote Proxy 156.30.21.200, Card Crypto (L2LVPN)

    Local7.Notice ipRemoved June 3, 2013 03/06/2013-13:02:11 13:02:11 LKM-NVP-L2L-01: % 713049-5-ASA: Group = ipRemoved, IP = ipRemoved, the security negotiation is complete for LAN - to - LAN Group (ipRemoved) initiator, Inbound SPI = 0x93f9be6c, outbound SPI = 0x1799a16d

    03/06/2013 13:02:11 Local7.Notice ipRemoved June 3, 2013 13:02:11 LKM-NVP-L2L-01: % 713120-5-ASA: Group = ipRemoved, IP = ipRemoved, PHASE 2 COMPLETED (msgid = 1f6c9acd)

    Any thoughts on why she would do that?

    Thank you.

    Jason

    Hello

    Both the log messages seems to suggest that the remote end is closed/compensation connection.

    Is this a new connection that suffer from this problem or has it started on an existing connection?

    The Cisco documentation associated with the Syslog messages does really not all useful information about these log messages.

    I guess that your problem is that TCP by L2L VPN connections suffer from the complete renegotiations of the L2L VPN.

    I wonder if the following configuration can help even if this situation persists

    Sysopt preserve-vpn-flow of connection

    Here is a link to the order of the ASA reference (8, 4-8, 6 software) with a better explanation of this configuration.

    http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/S8.html#wp1538395

    It is not enabled by default on the SAA.

    Hope this helps

    -Jouni

  • The L2L VPN Tunnels on several external Interfaces ISP

    Due to special circumstances, we have 2 links on an ASA5510 ISP. I'm trying to put an end to some VPN L2L tunnels on a link and others on the second link of Internet service provider, for example below:

    LOCAL FIREWALL

    card crypto outside-map_isp1 20 corresponds to the address VPN_ACL_A
    set outside-map_isp1 20 crypto map peer 1.1.1.1
    outside-map_isp1 20 game card crypto transform-set TS-generic

    card crypto outside-map_isp2 30 corresponds to the address VPN_ACL_B
    peer set card crypto outside-map_isp2 30 3.3.3.3
    card crypto outside-map_isp2 30 value transform-set TS-generic

    crypto map interface outside-map-isps1 ISP_1
    outside-map-isp2 interface card crypto ISP_2

    ISAKMP crypto enable ISP_1
    ISAKMP crypto enable ISP_2

    Route 0.0.0.0 ISP_1 0.0.0.0 1.1.1.254
    Route ISP_2 3.3.3.3 255.255.255.255 2.2.2.254

    Establishing the VPN tunnels in both directions when using ISP_1 works very well establshing in both directions of remote access users and several tunnels L2L (only showing a for example).

    On ISP_2

    1. peer device 3.3.3.3 establishes a VPN tunnel, but the return traffic does NOT get back to devices 3.3.3.3 tunnel.

    2. the local firewall does NOT establish a VPN tunnel to 3.3.3.3

    It suggests that the problems lies with this firewall multihomed do not direct traffic properly on back down and VPN tunnel of workbenches (point1) or to trigger a tunnel if there is (point 2).

    Reconfiguration of the VPN tunnel to 3.3.3.3 counterpart to be on the local firewall, all the springs in the life ISP_1! All ideas, there are enough license etc...

    Another way you need is the subnet of destination on VPN_ACL_B to be routed to ISP_2 as well.

    So you must send the address of peers (in your case 3.3.3.3) and the remote subnet (in your destination subnet case VPN_ACL_B) at 2.2.2.254

  • L2L ASA tunnel upward, no traffic (or one way...)

    I have two ASA 5505, 8.2 (1), call the HQ and BRANCH. HQ is a L2L towards a third point, and that one works fine.

    Now I'm setting up a VPN L2L between HQ and BRANCH. The tunnel rises (passes, phases 1 and 2), but I can't ping from both ends.

    HS cry isa his looks like 100% ok

    Cree SH ips its shows that HQ has only decaps, while the branch has only the program. If HQ looks like the main suspect for me (even with his other L2L works very well).

    Here are the configs, great if someone could help me to identify problems of config...

    -----------------------------------------------------------------

    HQ:

    ASA Version 8.2 (1)

    !

    hostname HQ

    domain blah.com/results.htm

    enable password blah

    encrypted passwd bla

    names of

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 172.16.106.1 255.255.255.128

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address 191.xx.xx.xx 255.255.255.248

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    !

    interface Ethernet0/6

    !

    interface Ethernet0/7

    !

    boot system Disk0: / asa821 - k8.bin

    DNS server-group DefaultDNS

    domain blah.com/results.htm

    access extensive list ip 172.16.106.0 inside_outbound_nat0_acl allow 255.255.255.128 all

    access extensive list ip 172.16.106.0 outside_cryptomap_20 allow 255.255.255.0 any

    access extensive list ip 172.16.106.0 inside_nat0_outbound allow 255.255.255.0 any

    access extensive list ip 172.16.106.0 inside_nat0_outbound allow 255.255.255.128 172.16.106.160 255.255.255.224

    access extensive list ip 172.16.106.0 outside_1_cryptomap allow 255.255.255.0 any

    access extensive list ip 172.16.106.0 outside_1_cryptomap_1 allow 255.255.255.0 any

    IP 172.16.106.0 allow to Access-list HQ-BRANCH extended 255.255.255.128 172.16.106.160 255.255.255.248

    !

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_nat0_outbound

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Route outside 0.0.0.0 0.0.0.0 191.xx.xx.xx 1

    !

    Sysopt noproxyarp inside

    !

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto ipsec security association replay disable

    card crypto outside_map 1 match address outside_1_cryptomap_1

    card crypto outside_map 1 set 191.xx.xx.xx counterpart

    map outside_map 1 set of transformation-ESP-3DES-MD5 crypto

    address for correspondence card crypto outside_map 10 HQ-GENERAL management

    card crypto outside_map 10 peers set 82.xx.xx.xx

    outside_map card crypto 10 the transform-set ESP-3DES-MD5 value

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    crypto ISAKMP policy 30

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    No encryption isakmp nat-traversal

    !

    WebVPN

    tunnel-group 191.xx.xx.xx type ipsec-l2l

    191.XX.XX.XX group of tunnel ipsec-attributes

    pre-shared-key *.

    tunnel-group 82.xx.xx.xx type ipsec-l2l

    82.XX.XX.XX group of tunnel ipsec-attributes

    pre-shared-key *.

    by default-group 191.xx.xx.xx tunnel-Group-map

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    global service-policy global_policy

    context of prompt hostname

    : end

    -----------------------------------------------------------------

    GENERAL management:

    ASA Version 8.2 (1)

    !

    hostname BRANCH

    activate djfldksjafl encrypted password

    djfldksjafl encrypted passwd

    names of

    !

    interface Vlan1

    No nameif

    no level of security

    no ip address

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address dhcp setroute

    !

    interface Vlan3

    nameif inside

    security-level 100

    IP 172.16.106.161 255.255.255.248

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    switchport access vlan 3

    !

    interface Ethernet0/2

    Shutdown

    !

    interface Ethernet0/3

    Shutdown

    !

    interface Ethernet0/4

    switchport access vlan 3

    !

    interface Ethernet0/5

    Shutdown

    !

    interface Ethernet0/6

    Shutdown

    !

    interface Ethernet0/7

    Shutdown

    !

    boot system Disk0: / asa821 - k8.bin

    the obj_any object-group network

    IP 172.16.106.160 allow to Access-list BRANCH-HQ extended 255.255.255.248 172.16.106.0 255.255.255.128

    IP 172.16.106.160 allow Access - list extended SHEEP 255.255.255.248 172.16.106.0 255.255.255.128

    Enable logging

    ICMP unreachable rate-limit 1 burst-size 1

    !

    NAT-control

    Global 1 interface (outside)

    NAT (inside) 0 access-list SHEEP

    NAT (inside) 1 0.0.0.0 0.0.0.0

    Route outside 0.0.0.0 0.0.0.0 82.xx.xx.xx

    !

    Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    address for correspondence card crypto 10 BRANCH-HQ outside_map

    card crypto outside_map 10 peers set 191.xx.xx.xx

    card crypto outside_map 10 transform-set RIGHT

    outside_map interface card crypto outside

    crypto ISAKMP allow outside

    crypto ISAKMP policy 10

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    dhcpd dns xx.xx.xx.xx

    dhcpd outside auto_config

    !

    dhcpd address 172.16.106.162 - 172.16.106.166 inside

    dhcpd allow inside

    !

    WebVPN

    tunnel-group 191.xx.xx.xx type ipsec-l2l

    191.XX.XX.XX group of tunnel ipsec-attributes

    pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    !

    global service-policy global_policy

    context of prompt hostname

    : end

    -----------------------------------------------------------------

    Best,

    Johnny

    Hello Johnny,.

    Great to hear that, there, you have some points for you

    Please check the question as answered so future users can draw from what you did

  • AnyConnect VPN full tunnel could not access the site to site VPN

    I have a set of AnyConnect VPN upward with no split tunneling (U-turning/crossed traffic), running 8.2.5 code.

    It works fine, but I want to allow customers to AnyConnect VPN site to site, which I was unable to access.

    I checked the IP addresses of network anyconnect are part of the tunnel on both sides.

    My logic tells me that I must not turn back traffic from the network anyconnect for the site to site VPN, but I don't know how to do this.

    Any help would be appreciated.

    Here are the relevant parts of my config:

    (Domestic network is 192.168.0.0/24,

    the AnyConnect network is 192.168.10.0/24,

    site to site VPN network is 192.168.2.0/24)

    --------------------------------------------------------------------------------------

    permit same-security-traffic inter-interface
    permit same-security-traffic intra-interface

    the DM_INLINE_NETWORK_1 object-group network
    object-network 192.168.0.0 255.255.255.0
    object-network 192.168.10.0 255.255.255.0
    inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_1 192.168.2.0 255.255.255.0
    permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.10.0 255.255.255.0

    outside_1_cryptomap list extended access allowed object-group ip DM_INLINE_NETWORK_1 192.168.2.0 255.255.255.0

    mask 192.168.10.2 - 192.168.10.254 255.255.255.0 IP local pool AnyConnectPool
    Global 1 interface (outside)
    NAT (inside) 0-list of access inside_nat0_outbound
    NAT (inside) 1 0.0.0.0 0.0.0.0
    NAT (outside) 1 192.168.10.0 255.255.255.0
    access-outside group access component software snap-in interface outside
    Route outside 0.0.0.0 0.0.0.0 (the gateway IP) 1
    WebVPN
    allow outside
    AnyConnect essentials
    SVC disk0:/anyconnect-win-3.1.05152-k9.pkg 1 image
    SVC profiles AnyConnectProfile disk0: / anyconnect_client.xml
    enable SVC
    tunnel-group-list activate
    internal AnyConnectGrpPolicy group strategy
    attributes of Group Policy AnyConnectGrpPolicy
    WINS server no
    value of 192.168.0.33 DNS server 192.168.2.33
    VPN-session-timeout no
    Protocol-tunnel-VPN l2tp ipsec svc
    Split-tunnel-policy tunnelall
    the address value AnyConnectPool pools
    type tunnel-group AnyConnectGroup remote access
    attributes global-tunnel-group AnyConnectGroup
    address pool AnyConnectPool
    authentication-server-group SERVER1_AD
    Group Policy - by default-AnyConnectGrpPolicy
    tunnel-group AnyConnectGroup webvpn-attributes
    the aaa authentication certificate
    activation of the Group _AnyConnect alias

    Your dial-up VPN traffic as originating apears on the external interface, so I think you need to exonerate NAT pool PN traffic directed to the site to site VPN. Something like this:

     global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 nat (outside) 0 access-list outside_nat0 nat (outside) 1 192.168.10.0 255.255.255.0 access-list outside_nat0 extended permit ip any 192.168.10.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.10.0 255.255.255.0

  • Internet access full tunnel - ASA5505

    On the side of SOHO is an ASA 5505. The head end is an ASA 5505.

    Version of the code on both is 8.2 (5).

    The VPN method is NEM.

    Traffic can pass from inside the 5505 network, but it cannot go to the internet. In particular, anything on the "no nat acl," which gets automatically applied to a declaration of nat when the vpnclient is put in place, works. Else died in the nat (inside) 1 0.0.0.0 0.0.0.0 statement.

    That dictates that no nat acl that applies to nat 0 on 5505 using NEM? I know it's in the config of your head somewhere, but I don't know where.

    Thank you!

    Hello

    I believe that in the current situation, you would have to configure PAT dynamic for users at the central site for Internet traffic if all traffic is sent through tunnel through the VPN connection.

    You would essentially have to do nat between 'outside' and 'outside' interface and enable the setting "permit same-security-traffic intra-interface".

    NAT configuration can be something like

    NAT (outside) 1

    If it already exists

    Global 1 interface (outside)

    I still don't know what you mean with the initial issue of NAT0.

    -Jouni

  • Using VPN L2L static and dynamic dedicated tunnels

    We have an ASA 5510 running 8.0 at our company headquarters. We have remote sites who need to create VPN L2L at the HQ ASA tunnels. Some remote sites have static IP addresses and others have dynamic IP addresses.

    I found documentation Cisco L2L static IP VPN tunnels and make them work. I found another Cisco documentation for static IP dynamic L2L VPN tunnels using the tunnel-group "DefaultL2LGroup".

    My question is, can you have two types of tunnels on the same ASA L2L? If so, simply by using the definitions of "DefaultL2LGroup" tunnel-group and of tunnel-group work? Is there a reason to not do? Is better technology (ASA HQ and a combination of ASA 5505 and 1861 at remote sites) available?

    Yes, you can have both types of tunnels L2L. If you use a PSK - remember that the IP address of the remote site is used to 'validate' to connect to Headquarters. As long as you use a sure PSK = 64 characters and all with upper/lower case alpha numeric - you should be OK.

    A better way to do it - is to get the static IP addresses for the site that currently have DHCP from ISP.

    HTH >

  • L2l tunnel and show connection addess

    Hello world

    ASA 5505 L2L 5520 tunnel a.

    The tunnel is running.

    5505 # sh crypto isakmp his

    IKEv1 SAs:

    ITS enabled: 1
    Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
    Total SA IKE: 1

    1 IKE Peer: 10.31.2.30
    Type: L2L role: initiator
    Generate a new key: no State: MM_ACTIVE

    There are no SAs IKEv2

    SH crypto ipsec his
    Interface: Visitor_Edge
    Tag crypto map: D_Traffic_Crypto, seq num: 1, local addr: 10.31.2.20

    When I sh conn address 10.31.2.20 all the
    5 in use, most used 9316
    ESP visitor identity Ifc 10.31.2.20 NP 10.31.2.30, idle 0:00:00, 9912 bytes, flags - 1
    UDP 10.31.2.30:500 NP identity Ifc 10.31.2.20:500 visitor, slowed down to 0:00:09, 3365216, flags - 2 bytes
    ESP visitor identity Ifc 10.31.2.20 NP 10.31.2.30, idle 0:00:00, 3816 bytes, flags - 3

    Must understand the connections 1 and 3 are used for what purpose and why they have no port information?

    As 2 is tunnel connection using port 500. but the connections 1 and 3 have no port number, why?

    Concerning

    Mahesh

    Connection 1 and 3 represent the traffic going in and out, ESP that sit directly on the IP header, so there is no port information.

    Connection 2 represent IKE messages that are exchanging messages on port UDP 500.

  • Decision on DMVPN and L2L simple IPsec tunnels

    I have a project where I need to make a decision on which solution to implement... environment is as follows...

    • 4 branches.
    • Each branch has 2 subnets; one for DATA and another for VOICE
    • 2 ISPS in each (an Internet access provider and a provider of MPLS)
    • Branch #1 isn't necessarily the HUB office that all database servers and files are there are
    • Branch #2 is actually where the phone equipment
    • Other 2 branches are just branches speaks (may not need never DATA interconnectivy, but they do need interconnection VOICE when they call since we spoke directly to the other)
    • MPLS is currently used for telephone traffic.
    • ISP provider link is used for site to site tunnels that traverse the internet, and it is the primary path for DATA. Means that all branch DATA subnets use the tunnels from site to site as main road to join the #1 branch where all files and databases are located.
    • I'd like to have redundancy in case the network MPLS down for all traffic VOICE switch to L2L tunnels.

    My #1 Option

    Because it isn't really a star to the need, I don't really know if I want to apply DMVPN, although I read great things about it. In addition, another reason, I would have perhaps against DMVPN is the 'delay' involved, at least during initialization, communications having spoke-to-spoke. There is always a broken package when a department wants to initiate communication with one another.

    My #2 Option

    My other choice is just deploy L2L IPSec tunnels between all 4 branches. It's certainly much easier to install than DMVPN although DMVPN can without routing protocols that I think I'll need. But with these Plains L2L IPSec tunnels, I can also add the GRE tunnels and the routing of traffic protocols it as well as all multicast traffic. In addition, I can easily install simple IP SLA that will keep all tunnels upwards forever.

    Can someone please help to choose one over the other is? or if I'm just okay with the realization of the #2 option

    Thanks in advance

    Hi ciscobigcat

    Yes, OSPF will send periodic packets 'Hello' and they will maintain the tunnels at all times.

    The numbers that you see (143 and 1001) are the "cost" of the track, so OSPF (Simplified) will calculate what different paths there are to a destination and assign each of them a 'cost' (by assigning a cost to each segment of the path, for example GigabitEthernet is "lower cost" Fastethernet and then adding the costs of all segments).

    Then it will take the path to the lowest cost (143 in your case, in normal operation) and insert this in the routing table.

    So since traffic is already going the right way, I don't know if you still need any tweaking? Personally, I would not add a second routing protocol because, generally, makes things more complicated.

    QoS, it is important to use "prior qos rank".

    See for example

    http://www.Cisco.com/en/us/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/IPSecQoS.html

    http://www.Cisco.com/en/us/Tech/tk543/tk757/technologies_tech_note09186a00800b3d15.shtml

    HTH

    Herbert

  • HTTPS protocol between the client vpn and host of the internet through tunnel ipsec-parody

    Hello

    We have a cisco ASA 5505 and try to get the next job:

    ip (192.168.75.5) - connected to the Cisco ASA 5505 VPN client

    the customer gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100)

    When I try to access the url of the client, I get a syn sent with netstat

    When I try trace ASA package, I see the following:

    1

    FLOW-SEARCH

    ALLOW

    Not found no corresponding stream, creating a new stream

    2

    ROUTE SEARCH

    entry

    ALLOW

    in 0.0.0.0 0.0.0.0 outdoors

    3

    ACCESS-LIST

    Journal

    ALLOW

    Access-group outside_access_in in interface outside

    outside_access_in list extended access permitted tcp everything any https eq

    access-list outside_access_in note hyperion outside inside

    4

    IP-OPTIONS

    ALLOW

    5

    CP-PUNT

    ALLOW

    6

    VPN

    IPSec-tunnel-flow

    ALLOW

    7

    IP-OPTIONS

    ALLOW

    8

    VPN

    encrypt

    ALLOW

    outdoors

    upward

    upward

    outdoors

    upward

    upward

    drop

    (ipsec-parody) Parody of detected IPSEC

    When I try the reverse (i.e. from the internet host to vpn client), it seems to work:

    1

    FLOW-SEARCH

    ALLOW

    Not found no corresponding stream, creating a new stream

    2

    ROUTE SEARCH

    entry

    ALLOW

    in 192.168.75.5 255.255.255.255 outside

    3

    ACCESS-LIST

    Journal

    ALLOW

    Access-group outside_access_in in interface outside

    outside_access_in of access allowed any ip an extended list

    4

    IP-OPTIONS

    ALLOW

    5

    VPN

    IPSec-tunnel-flow

    ALLOW

    6

    VPN

    encrypt

    ALLOW

    My question is why this phenomenon happens and how solve us this problem?

    Thanks in advance, Sipke

    our running-config:

    : Saved

    :

    ASA Version 8.0 (4)

    !

    ciscoasa hostname

    domain somedomain

    activate the password - encrypted

    passwd - encrypted

    names of

    name 10.10.1.0 Hyperion

    name 164.140.159.x xxxx

    name 192.168.72.25 xxxx

    name 192.168.72.24 xxxx

    name 192.168.72.196 xxxx

    name 192.168.75.0 vpn clients

    name 213.206.236.0 xxxx

    name 143.47.160.0 xxxx

    name 141.143.32.0 xxxx

    name 141.143.0.0 xxxx

    name 192.168.72.27 xxxx

    name 10.1.11.0 xxxx

    name 10.1.2.240 xxxx

    name 10.1.1.0 xxxx

    name 10.75.2.1 xxxx

    name 10.75.2.23 xxxx

    name 192.168.72.150 xxxx

    name 192.168.33.0 xxxx

    name 192.168.72.26 xxxx

    name 192.168.72.5 xxxx

    name 192.168.23.0 xxxx

    name 192.168.34.0 xxxx

    name 79.143.218.35 inethost

    !

    interface Vlan1

    nameif inside

    security-level 100

    IP 192.168.72.254 255.255.255.0

    OSPF cost 10

    !

    interface Vlan2

    nameif outside

    security-level 0

    IP address 193.173.x.x 255.255.255.240

    OSPF cost 10

    !

    interface Vlan3

    Shutdown

    nameif dmz

    security-level 50

    192.168.50.1 IP address 255.255.255.0

    OSPF cost 10

    !

    interface Vlan23

    nameif wireless

    security-level 80

    192.168.40.1 IP address 255.255.255.0

    OSPF cost 10

    !

    interface Ethernet0/0

    switchport access vlan 2

    !

    interface Ethernet0/1

    !

    interface Ethernet0/2

    !

    interface Ethernet0/3

    !

    interface Ethernet0/4

    !

    interface Ethernet0/5

    switchport access vlan 3

    !

    interface Ethernet0/6

    switchport access vlan 23

    !

    interface Ethernet0/7

    !

    passive FTP mode

    clock timezone THATS 1

    clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00

    DNS lookup field inside

    DNS server-group DefaultDNS

    domain pearle.local

    permit same-security-traffic inter-interface

    permit same-security-traffic intra-interface

    object-group Protocol TCPUDP

    object-protocol udp

    object-tcp protocol

    object-group service RDP - tcp

    Remote Desktop Protocol Description

    EQ port 3389 object

    object-group service UDP - udp VC

    range of object-port 60000 60039

    object-group VC - TCP tcp service

    60000 60009 object-port Beach

    object-group service tcp Fortis

    1501 1501 object-port Beach

    Beach of port-object 1502-1502

    Beach of port-object sqlnet sqlnet

    1584 1584 object-port Beach

    1592 1592 object-port Beach

    object-group service tcp fortis

    1592 1592 object-port Beach

    Beach of port-object 1502-1502

    1584 1584 object-port Beach

    Beach of port-object sqlnet sqlnet

    1501 1501 object-port Beach

    1500 1500 object-port Beach

    the DM_INLINE_NETWORK_1 object-group network

    object-network 192.168.50.0 255.255.255.0

    object-network 192.168.72.0 255.255.255.0

    object-network 192.168.40.0 255.255.255.0

    object-network VPN_Pool_2 255.255.255.0

    the DM_INLINE_NETWORK_2 object-group network

    object-network 192.168.50.0 255.255.255.0

    object-network 192.168.72.0 255.255.255.0

    object-group network inside-networks

    object-network 192.168.72.0 255.255.255.0

    WingFTP_TCP tcp service object-group

    Secure FTP description

    port-object eq 989

    port-object eq 990

    DM_INLINE_TCP_1 tcp service object-group

    port-object eq ftp

    port-object eq ftp - data

    Group object WingFTP_TCP

    DM_INLINE_TCP_2 tcp service object-group

    port-object eq ftp

    port-object eq ftp - data

    Group object WingFTP_TCP

    the DM_INLINE_NETWORK_3 object-group network

    object-network 192.168.72.0 255.255.255.0

    object-network VPN_Pool_2 255.255.255.0

    the DM_INLINE_NETWORK_4 object-group network

    object-network 192.168.72.0 255.255.255.0

    object-network VPN_Pool_2 255.255.255.0

    object-group network Oracle

    network-object OracleTwo 255.255.224.0

    network-object OracleOne 255.255.240.0

    network-object OracleThree 255.255.224.0

    the DM_INLINE_NETWORK_5 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network Grandvision4

    host of the object-Network GrandVision_PC

    the DM_INLINE_NETWORK_6 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network Grandvision4

    host of the object-Network GrandVision_PC

    the DM_INLINE_NETWORK_7 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network GrandVision_PC

    the DM_INLINE_NETWORK_8 object-group network

    network-object Grandvision 255.255.255.0

    network-object Grandvision2 255.255.255.240

    object-network Grandvision3 255.255.255.0

    host of the object-Network GrandVision_PC

    object-group service DM_INLINE_SERVICE_2

    the purpose of the ip service

    EQ-3389 tcp service object

    the DM_INLINE_NETWORK_9 object-group network

    network-object OracleThree 255.255.0.0

    network-object OracleTwo 255.255.224.0

    network-object OracleOne 255.255.240.0

    object-group service DM_INLINE_SERVICE_3

    the purpose of the ip service

    EQ-3389 tcp service object

    Atera tcp service object-group

    Atera Webbased monitoring description

    8001 8001 object-port Beach

    8002 8002 object-port Beach

    8003 8003 object-port Beach

    WingFTP_UDP udp service object-group

    port-object eq 989

    port-object eq 990

    WingFTP tcp service object-group

    Description range of ports for the transmission of data

    object-port range 1024-1054

    HTTPS_redirected tcp service object-group

    Description redirect WingFTP Server

    port-object eq 40200

    Note to inside_access_in to access list ICMP test protocol inside outside

    inside_access_in list extended access allow icmp 192.168.72.0 255.255.255.0 any

    Note to inside_access_in to access list ICMP test protocol inside outside

    access-list inside_access_in note HTTP inside outside

    inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 any eq www

    access-list inside_access_in note queries DNS inside to outside

    inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 no matter what eq field

    access-list inside_access_in note the HTTPS protocol inside and outside

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any https eq

    Note to inside_access_in to access list ICMP test protocol inside outside

    access-list inside_access_in note 7472 Epo-items inside outside

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq 7472

    access-list inside_access_in note POP3 inside outside

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq pop3

    inside_access_in list extended access permit udp host LifeSize-PE-HQ any object-group UDP - VC

    inside_access_in list extended access permit tcp host LifeSize-PE-HQ all eq h323

    access-list inside_access_in note video conference services

    inside_access_in list extended access permit tcp host LifeSize-PE-HQ any object-group VC - TCP

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any

    Note to inside_access_in to access list Fortis

    inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any object-group Fortis

    access extensive list ip 192.168.40.0 inside_access_in allow 255.255.255.0 any

    inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any

    inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any eq www

    inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any https eq

    inside_access_in allowed all Hyperion 255.255.255.0 ip extended access list

    inside_access_in list extended access udp allowed any any eq isakmp

    inside_access_in list extended access udp allowed any any eq ntp

    inside_access_in list extended access udp allowed any any eq 4500

    inside_access_in list of allowed ip extended access any Oracle object-group

    inside_access_in list extended access udp allowed any any eq 10000

    access-list inside_access_in note PPTP inside outside

    inside_access_in list extended access permit tcp any any eq pptp

    access-list inside_access_in note WILL inside outside

    inside_access_in list extended access will permit a full

    Note to inside_access_in to access the Infrastructure of the RIM BES server list

    inside_access_in list extended access permit tcp host BESServer any eq 3101

    inside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group

    inside_access_in list extended access permit tcp any any HTTPS_redirected object-group

    access extensive list ip Hyperion 255.255.255.0 inside_access_in 255.255.255.0 allow VPN_Pool_2

    inside_access_in list extended access permit udp any host 86.109.255.177 eq 1194

    access extensive list ip 192.168.72.0 inside_access_in allow 255.255.255.0 DM_INLINE_NETWORK_7 object-group

    access extensive list ip VPN_Pool_2 inside_access_in allow 255.255.255.0 any

    inside_access_in list extended access deny ip any any inactive debug log

    Note to outside_access_in to access list ICMP test protocol outside inside

    outside_access_in list extended access permit icmp any one

    access-list outside_access_in Note SMTP outside inside

    outside_access_in list extended access permit tcp any any eq smtp

    outside_access_in list extended access udp allowed any any eq ntp disable journal

    access-list outside_access_in note 7472 EPO-items outside inside

    outside_access_in list extended access permit tcp any any eq 7472

    outside_access_in list extended access permit tcp any any object-group inactive RDP

    outside_access_in list extended access permit tcp any any eq www

    outside_access_in list extended access permit tcp any any HTTPS_redirected object-group

    outside_access_in list extended access permitted tcp everything any https eq

    access-list outside_access_in note hyperion outside inside

    outside_access_in list extended access permitted tcp Hyperion 255.255.255.0 DM_INLINE_NETWORK_4 object-group

    outside_access_in to access Hyperion 255.255.255.0 ip extended list object-group DM_INLINE_NETWORK_3 allow

    outside_access_in list extended access permit tcp any host LifeSize-PE-HQ eq h323

    outside_access_in list extended access permit tcp any host LifeSize-PE-HQ object-group VC - TCP

    outside_access_in list extended access permit udp any host group-object-LifeSize-PE-HQ UDP - VC

    outside_access_in of access allowed any ip an extended list

    outside_access_in list extended access udp allowed any any eq 4500

    outside_access_in list extended access udp allowed any any eq isakmp

    outside_access_in list extended access udp allowed any any eq 10000

    outside_access_in list extended access will permit a full

    outside_access_in list extended access permit tcp any any eq pptp

    outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group

    outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_8 192.168.72.0 255.255.255.0 inactive

    outside_access_in list extended access permit tcp any any Atera object-group

    outside_access_in list extended access deny ip any any inactive debug log

    outside_1_cryptomap list extended access allowed object-group Hyperion DM_INLINE_NETWORK_2 255.255.255.0 ip

    outside_1_cryptomap to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0

    access extensive list ip 192.168.72.0 inside_nat0_outbound allow Hyperion 255.255.255.0 255.255.255.0

    inside_nat0_outbound list of allowed ip extended access all 193.172.182.64 255.255.255.240

    inside_nat0_outbound list of allowed ip extended access all 192.168.72.192 255.255.255.192

    inside_nat0_outbound list of allowed ip extended access all 192.168.72.0 255.255.255.0

    access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 VPN_Pool_2 255.255.255.0

    access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_5 object-group

    inside_nat0_outbound list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0

    inside_nat0_outbound list of allowed ip extended access any Swabach 255.255.255.0

    access-list 200 scope allow tcp all fortis of fortis host object-group

    access extensive list ip VPN_Pool_2 outside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_9 object-group

    outside_cryptomap_2 list extended access allowed object-group Hyperion DM_INLINE_NETWORK_1 255.255.255.0 ip

    outside_cryptomap_2 to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0

    Note Wireless_access_in of access list, select Hyperion / wifi access NAT rule.

    Access extensive list ip 192.168.40.0 Wireless_access_in allow Hyperion inactive 255.255.255.0 255.255.255.0

    Wireless_access_in list extended access deny ip 192.168.40.0 255.255.255.0 192.168.72.0 255.255.255.0

    Comment by Wireless_access_in-list of the traffic Internet access

    Access extensive list ip 192.168.40.0 Wireless_access_in allow 255.255.255.0 any

    standard access list splittunnelclientvpn allow 192.168.72.0 255.255.255.0

    splittunnelclientvpn list standard access allowed Hyperion 255.255.255.0

    standard access list splittunnelclientvpn allow Pearleshare 255.255.255.0

    splittunnelclientvpn list standard access allowed host 85.17.235.22

    splittunnelclientvpn list standard access allowed OracleThree 255.255.224.0

    standard access list splittunnelclientvpn allow 143.47.128.0 255.255.240.0

    splittunnelclientvpn list standard access allowed host inethost

    Standard access list SplittnlHyperion allow OracleThree 255.255.0.0

    Standard access list SplittnlOOD allow OracleThree 255.255.0.0

    Standard access list SplittnlOOD allow 143.47.128.0 255.255.240.0

    access extensive list ip 192.168.72.0 outside_cryptomap allow 255.255.255.0 DM_INLINE_NETWORK_6 object-group

    outside_cryptomap_1 list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0

    outside_cryptomap_3 list of allowed ip extended access any Swabach 255.255.255.0

    192.168.72.0 IP Access-list extended sheep 255.255.255.0 GrandVisionSoesterberg 255.255.255.0 allow

    192.168.72.0 IP Access-list extended sheep 255.255.255.0 VPN_Pool_2 255.255.255.0 allow

    pager lines 24

    Enable logging

    asdm of logging of information

    Within 1500 MTU

    Outside 1500 MTU

    MTU 1500 dmz

    MTU 1500 wireless

    local pool VPN_DHCP 192.168.72.220 - 192.168.72.235 255.255.255.0 IP mask

    mask 192.168.75.1 - 192.168.75.50 255.255.255.0 IP local pool VPN_Range_2

    no failover

    ICMP unreachable rate-limit 1 burst-size 1

    ICMP allow any inside

    ICMP allow all outside

    ASDM image disk0: / asdm - 613.bin

    don't allow no asdm history

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0 access-list sheep

    NAT (inside) 1 0.0.0.0 0.0.0.0

    NAT (wireless) 1 192.168.40.0 255.255.255.0

    public static tcp (indoor, outdoor) interface smtp smtp Mailsrv_Pearle_Europe netmask 255.255.255.255

    public static tcp (indoor, outdoor) interface ftp ftp netmask 255.255.255.255 Pearle-DC02

    public static 990 Pearle-DC02 990 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    static (inside, outside) tcp 3389 3389 Mailsrv_Pearle_Europe netmask 255.255.255.255 interface

    public static tcp (indoor, outdoor) interface www Pearle-DC02 www netmask 255.255.255.255

    public static 40200 Pearle-DC02 40200 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static tcp (indoor, outdoor) interface https Exchange2010 https netmask 255.255.255.255

    public static tcp (indoor, outdoor) interface h323 h323 LifeSize-PE-HQ netmask 255.255.255.255

    public static 60000 60000 LifeSize-PE-HQ netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static (inside, outside) udp interface 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255

    public static (inside, outside) udp interface 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255

    public static (inside, outside) udp interface 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255

    public static (inside, outside) udp interface 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255

    public static (inside, outside) udp interface 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255

    public static (inside, outside) udp interface 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255

    public static (inside, outside) udp interface 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255

    public static (inside, outside) udp interface 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255

    public static (inside, outside) udp interface 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255

    public static (inside, outside) udp interface 60010 LifeSize-PE-HQ 60010 netmask 255.255.255.255

    public static (inside, outside) udp interface 60011 LifeSize-PE-HQ 60011 netmask 255.255.255.255

    public static (inside, outside) udp interface 60012 LifeSize-PE-HQ 60012 netmask 255.255.255.255

    public static (inside, outside) udp interface 60013 LifeSize-PE-HQ 60013 netmask 255.255.255.255

    public static (inside, outside) udp interface 60014 LifeSize-PE-HQ 60014 netmask 255.255.255.255

    public static (inside, outside) udp interface 60015 LifeSize-PE-HQ 60015 netmask 255.255.255.255

    public static (inside, outside) udp interface 60016 LifeSize-PE-HQ 60016 netmask 255.255.255.255

    public static (inside, outside) udp interface 60017 LifeSize-PE-HQ 60017 netmask 255.255.255.255

    public static (inside, outside) udp interface 60018 LifeSize-PE-HQ 60018 netmask 255.255.255.255

    public static (inside, outside) udp interface 60019 LifeSize-PE-HQ 60019 netmask 255.255.255.255

    public static (inside, outside) udp interface 60020 LifeSize-PE-HQ 60020 netmask 255.255.255.255

    public static (inside, outside) udp interface 60021 60021 LifeSize-PE-HQ netmask 255.255.255.255

    public static (inside, outside) udp interface 60022 LifeSize-PE-HQ 60022 netmask 255.255.255.255

    public static (inside, outside) udp interface 60023 LifeSize-PE-HQ 60023 netmask 255.255.255.255

    public static (inside, outside) udp interface 60024 LifeSize-PE-HQ 60024 netmask 255.255.255.255

    public static (inside, outside) udp interface 60025 LifeSize-PE-HQ 60025 netmask 255.255.255.255

    public static (inside, outside) udp interface 60026 LifeSize-PE-HQ 60026 netmask 255.255.255.255

    public static (inside, outside) udp interface 60027 LifeSize-PE-HQ 60027 netmask 255.255.255.255

    public static (inside, outside) udp interface 60028 LifeSize-PE-HQ 60028 netmask 255.255.255.255

    public static (inside, outside) udp interface 60029 LifeSize-PE-HQ 60029 netmask 255.255.255.255

    public static (inside, outside) udp interface 60030 LifeSize-PE-HQ 60030 netmask 255.255.255.255

    public static (inside, outside) udp interface 60031 LifeSize-PE-HQ 60031 netmask 255.255.255.255

    public static (inside, outside) udp interface 60032 LifeSize-PE-HQ 60032 netmask 255.255.255.255

    public static (inside, outside) udp interface 60033 LifeSize-PE-HQ 60033 netmask 255.255.255.255

    public static (inside, outside) udp interface 60034 LifeSize-PE-HQ 60034 netmask 255.255.255.255

    public static (inside, outside) udp interface 60035 LifeSize-PE-HQ 60035 netmask 255.255.255.255

    public static (inside, outside) udp interface 60036 LifeSize-PE-HQ 60036 netmask 255.255.255.255

    public static (inside, outside) udp interface 60037 LifeSize-PE-HQ 60037 netmask 255.255.255.255

    public static (inside, outside) udp interface 60038 LifeSize-PE-HQ 60038 netmask 255.255.255.255

    public static (inside, outside) udp interface 60039 LifeSize-PE-HQ 60039 netmask 255.255.255.255

    public static (inside, outside) udp interface 60040 60040 LifeSize-PE-HQ netmask 255.255.255.255

    public static Mailsrv_Pearle_Europe 7472 netmask 255.255.255.255 7472 interface tcp (indoor, outdoor)

    public static LanSweep-XP netmask 255.255.255.255 8001 8001 interface tcp (indoor, outdoor)

    public static 8002 8002 LanSweep-XP netmask 255.255.255.255 interface tcp (indoor, outdoor)

    public static LanSweep-XP netmask 255.255.255.255 8003 8003 interface tcp (indoor, outdoor)

    static (inside, outside) 193.173.12.194 tcp https Pearle-DC02 https netmask 255.255.255.255

    inside_access_in access to the interface inside group

    Access-group outside_access_in in interface outside

    Access-group Wireless_access_in in wireless interface

    Route outside 0.0.0.0 0.0.0.0 193.173.12.206 1

    Route outside OracleThree 255.255.224.0 193.173.12.198 1

    Route outside 143.47.128.0 255.255.240.0 193.173.12.198 1

    Route inside 172.27.0.0 255.255.255.0 Pearle-DC02 1

    Timeout xlate 03:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

    dynamic-access-policy-registration DfltAccessPolicy

    AAA authentication LOCAL telnet console

    the ssh LOCAL console AAA authentication

    Enable http server

    http 192.168.40.0 255.255.255.0 Wireless

    http 192.168.1.0 255.255.255.0 inside

    http 192.168.72.0 255.255.255.0 inside

    http GrandVisionSoesterberg 255.255.255.0 inside

    SNMP-server host inside 192.168.33.29 survey community public version 2 c

    location of Server SNMP Schiphol

    contact Server SNMP SSmeekes

    SNMP-Server Public community

    Server enable SNMP traps snmp authentication linkup, linkdown cold start

    Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

    Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

    Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

    Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

    Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

    Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

    Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

    Crypto ipsec transform-set esp-aes-256 GRANDVISION esp-md5-hmac

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs

    Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

    Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds

    cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map

    card crypto outside_map0 1 match address outside_cryptomap_1

    outside_map0 card crypto 1jeu pfs

    outside_map0 card crypto 1jeu peer 212.78.223.182

    outside_map0 card crypto 1jeu transform-set ESP ESP-3DES-SHA-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-ESP ESP-3DES-MD5 MD5-DES-SHA ESP-DES-MD5

    outside_map0 map 1 lifetime of security association set seconds 28800 crypto

    card crypto outside_map0 1 set security-association life kilobytes 4608000

    card crypto game 2 outside_map0 address outside_cryptomap_2

    outside_map0 crypto map peer set 2 193.173.12.193

    card crypto outside_map0 2 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5

    life card crypto outside_map0 2 set security-association seconds 28800

    card crypto outside_map0 2 set security-association life kilobytes 4608000

    card crypto outside_map0 3 match address outside_1_cryptomap

    outside_map0 card crypto 3 set pfs

    outside_map0 card crypto 3 peers set 193.172.182.66

    outside_map0 crypto map 3 the value transform-set ESP-3DES-SHA

    life card crypto outside_map0 3 set security-association seconds 28800

    card crypto outside_map0 3 set security-association life kilobytes 4608000

    card crypto outside_map0 game 4 address outside_cryptomap

    outside_map0 card crypto 4 peers set 213.56.81.58

    outside_map0 4 set transform-set GRANDVISION crypto card

    life card crypto outside_map0 4 set security-association seconds 28800

    card crypto outside_map0 4 set security-association life kilobytes 4608000

    card crypto outside_map0 5 match address outside_cryptomap_3

    outside_map0 card crypto 5 set pfs

    outside_map0 crypto card 5 peers set 86.109.255.177

    outside_map0 card crypto 5 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5

    life card crypto outside_map0 5 set security-association seconds 28800

    card crypto outside_map0 5 set security-association life kilobytes 4608000

    Crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP

    outside_map0 interface card crypto outside

    crypto ISAKMP allow inside

    crypto ISAKMP allow outside

    crypto ISAKMP enable dmz

    crypto ISAKMP enable wireless

    crypto ISAKMP policy 5

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 86400

    Telnet 192.168.72.0 255.255.255.0 inside

    Telnet timeout 5

    SSH 192.168.72.0 255.255.255.0 inside

    SSH GrandVisionSoesterberg 255.255.255.0 inside

    SSH 213.144.239.0 255.255.255.192 outside

    SSH timeout 5

    Console timeout 0

    management-access inside

    dhcpd dns 194.151.228.18 is 10.10.1.100

    dhcpd outside auto_config

    !

    dhcpd address 192.168.72.253 - 192.168.72.253 inside

    !

    dhcpd address dmz 192.168.50.10 - 192.168.50.50

    dhcpd enable dmz

    !

    dhcpd address wireless 192.168.40.10 - 192.168.40.99

    dhcpd dns 194.151.228.18 wireless interface

    dhcpd activate wireless

    !

    a basic threat threat detection

    host of statistical threat detection

    statistical threat detection port

    Statistical threat detection Protocol

    Statistics-list of access threat detection

    no statistical threat detection tcp-interception

    Group Policy "pearle_vpn_Hyp only" internal

    attributes of Group Policy "pearle_vpn_Hyp only".

    value of server WINS 192.168.72.25

    value of server DNS 192.168.72.25

    Protocol-tunnel-VPN IPSec l2tp ipsec

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list SplittnlHyperion

    Split-dns value pearle.local

    internal pearle_vpn_OOD_only group policy

    attributes of the strategy of group pearle_vpn_OOD_only

    value of Split-tunnel-network-list SplittnlOOD

    internal pearle_vpn group policy

    attributes of the strategy of group pearle_vpn

    value of server WINS 192.168.72.25

    value of server DNS 192.168.72.25

    Protocol-tunnel-VPN IPSec l2tp ipsec svc

    Split-tunnel-policy tunnelspecified

    value of Split-tunnel-network-list splittunnelclientvpn

    Pearle.local value by default-field

    Split-dns value pearle.local

    username anyone password encrypted password

    username something conferred

    VPN-group-policy pearle_vpn_OOD_only

    type of remote access service

    tunnel-group 193 type ipsec-l2l

    tunnel-group 193 ipsec-attributes

    pre-shared-key *.

    tunnel-group 193.173.12.193 type ipsec-l2l

    IPSec-attributes tunnel-group 193.173.12.193

    pre-shared-key *.

    NOCHECK Peer-id-validate

    type tunnel-group pearle_vpn remote access

    tunnel-group pearle_vpn General-attributes

    address pool VPN_Range_2

    Group Policy - by default-pearle_vpn

    pearle_vpn group of tunnel ipsec-attributes

    pre-shared-key *.

    type tunnel-group Pearle_VPN_2 remote access

    attributes global-tunnel-group Pearle_VPN_2

    address pool VPN_Range_2

    strategy-group-by default "pearle_vpn_Hyp only".

    IPSec-attributes tunnel-group Pearle_VPN_2

    pre-shared-key *.

    tunnel-group 213.56.81.58 type ipsec-l2l

    IPSec-attributes tunnel-group 213.56.81.58

    pre-shared-key *.

    tunnel-group 212.78.223.182 type ipsec-l2l

    IPSec-attributes tunnel-group 212.78.223.182

    pre-shared-key *.

    tunnel-group 86.109.255.177 type ipsec-l2l

    IPSec-attributes tunnel-group 86.109.255.177

    pre-shared-key *.

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    type of policy-card inspect dns preset_dns_map

    parameters

    message-length maximum 512

    Policy-map global_policy

    class inspection_default

    inspect the preset_dns_map dns

    inspect the ftp

    inspect h323 h225

    inspect the h323 ras

    inspect the rsh

    inspect the rtsp

    inspect the skinny

    inspect sunrpc

    inspect xdmcp

    inspect the sip

    inspect the netbios

    inspect the tftp

    inspect the pptp

    !

    global service-policy global_policy

    context of prompt hostname

    Cryptochecksum:7d4d9c7ca7c865d9e40f5d77ed1238eb

    : end

    ASDM image disk0: / asdm - 613.bin

    ASDM BESServer 255.255.255.255 inside location

    ASDM VPN_Pool_2 255.255.255.0 inside location

    ASDM OracleTwo 255.255.224.0 inside location

    ASDM OracleOne 255.255.240.0 inside location

    ASDM OracleThree 255.255.224.0 inside location

    ASDM location Exchange2010 255.255.255.255 inside

    ASDM location Grandvision 255.255.255.0 inside

    ASDM Grandvision2 255.255.255.240 inside location

    ASDM Grandvision3 255.255.255.0 inside location

    ASDM Grandvision4 255.255.255.255 inside location

    ASDM GrandVision_PC 255.255.255.255 inside location

    ASDM location LanSweep-XP 255.255.255.255 inside

    ASDM GrandVisionSoesterberg 255.255.255.0 inside location

    ASDM location Pearle-DC02 255.255.255.255 inside

    ASDM location Pearle-WDS 255.255.255.255 inside

    ASDM location Swabach 255.255.255.0 inside

    ASDM GrandVisionSoesterberg2 255.255.255.0 inside location

    don't allow no asdm history

    Where is that host (inethost)? Inside of the ASA, or on the internet (on the outside)?

    If it is outside, you must configure the NAT for the pool of vpn as you turn on the SAA.

    NAT (outside) 1 192.168.75.0 255.255.255.0

Maybe you are looking for

  • claim code for HP Photosmart 8550

    I have a HP Photosmart 8550, this is not web active or wireless.  I registered my HP Laserjet 425 without problem, claim code have been automatically generated. Is it possible to join HP connected to this printer?  If so, how do you get a claim code?

  • Windows Update service works do not (Windows 7)

    If I try to start the service manually from the Services application does not list.  Or too much Security Center. I was victim of a malware attack.  I used Malwarebytes to remove it. Although these programs are good to get rid of the infected files t

  • How to force the record to stay simple documents?

    For some reason any folder in My Documents downloads header to remain a type of music. It shows the columns like artist, Album title, track, etc. When I look at the properties > customize, it appears as a generic 'Documents (for any file type)' many

  • new file is empty. Cannot create a new folder. How can I fix it?

    When I click on "FILE" 'NEW', it is 'empty'. "." I can't create a new folder.  How can I change this so that it shows the folder?  Also.  When I chick on a hypertext link, I get a message that, because of the restriction on the computer, I can't acce

  • Malware in the drivers Epson DX8400

    When you try to download the drivers for Epson DX8400 I get loads of malware even on Epson site. Is there anywhere that is malware free download these drivers?