L2TP over IPSEC VPN is supported in Cisco SRP 521w?
I now try to configure a Cisco Small Business Pro SRP 521w for a branch office router, I try to get the router to connect to a VPN L2TP server inside my data center, but it seems to me that the client VPN L2TP function is not supported within the SRP 521w router.
Can Cisco implementing in the future in the firmware for the router in SRP 521w client VPN L2TP?
Hello
This is correct, without L2TP over IPSec tunnels.
(L2TP only supported on the primary Ethernet WAN interfaces).
Kind regards
Andy
Tags: Cisco Support
Similar Questions
-
Microsoft L2TP over IPSEC client with AES encryption
I configured L2TP over IPSec Cisco VPN router with Hastings 3des encryption is sha1 with diffie hellman Group 2 and I can't connect with success of Microsoft customers.
but my question is why can I not connect when I am increasing the encryption with AES 256 and sha256 DH group 14, his looks that windows does not support advanced encryption.
is it possiple to activate encryption aes with the highest level...? and how?.
Hello
To ensure that you get the best response to your concerns, we suggest that publish this request via the Web to Microsoft Developer network site. To do this, visit this link.
Best regards.
-
Problem of authenticating users on L2TP over IPSec tunnel
I have a client with an old PIX-515e firewall with firmware 7.2 (4), and due to certain circumstances, I'm trying to configure L2TP over IPSec. I'm stuck at a "Error 691: the remote connection has been deinied because the user name and password combination, you have provided is not recognized, or the selected authentication protocol is not permitted on the remote access server." I have local installation of authentication for this connection, and I tried to use ms-chap-v2, chap and pap, and give the same results. I have confirmed the username and the password, but I can't after that.
The PIX, I don't see "AAA user authenticaton rejected: reason = invalid password: local database: user = tetstuser". I can still see the password unencrypted on the screen, so I can copy and paste the username and password in the appropriate fields, and I still have this error.
Does anyone have an idea where the problem lies perhaps? Thank you.
Can you please change the user as described in the doc, I shared and as indicated by the Rohan peers and share the results of the tests?
Kind regards
Dinesh Moudgil
PS Please rate helpful messages.
-
Cisco SRP 521W with multiple WAN IP addresses
Hi all
I have an unusual scenario that may require the use of a SRP 521W-, the scenario is as follows:
Temporary installation:
- Cisco 857 ADSL router until the Ethernet Hand-off is installed
- Several IPS delivered on the ADSL WAN service
- Cisco 857 in Bridge Mode and connected to the WAN - SRP 521W port
- Cisco 521W manages authentication and routing
- Check Point Firewall system connected to SRP 521W LAN-1
- Check Point Firewall has IP WAN 203.XXX.XXX.XXX
- Cisco UC-540W connected to SRP 521W LAN-2
- Cisco UC-540W has 203.XX WAN IP. XX. XX
If you understand the situation described above, I'm curious to know if this is possible and if so how? I need a totally separate networks and the only thing they have in common is the Cisco SRP 521W.
It is also worth noting that the SRP 521W is used because the ADSL service is only temporary, while the fiber build is complete and the carrier provides an Ethernet Hand-Off, then Internet service will change to this type of presentation and the ADSL router will be relegated in the dark loneliness world.
I went through the router and have been playing around with the settings, the problem is that I have nothing in LABORATORY work more that can I would like to reproduce this environment and test it before deployment... SO I hope someone can help to shed light on this case in order to reduce the amount of trail and error, I have to meet to operate.
For any help or suggestion is appreciated.
See you soon,.
David.
Hi David,
Is your PC provides you with all the public addresses within the same subnet? that is the WAN IP of the router is part of the same subnet as the address 203.x.x.x? Or well, is separately assigned WAN address?
If the addresses are all part of the same subnet, I fear the SRP520 will not support what you are trying to do - this product does not support the concept of a single address on the WAN port forwarding/DMZ use.
If the sunet inside is routed via the WAN address, then it should be possible to turn NAT and attack the VLAN local accordingly.
PS: The SRP541 host multiple WAN addresses for port forwarding/DMZ.
Kind regards
Andy
-
VAC
It's lab that I did today, and offcouse, I am able to understand this laboratory bus are confusion
1. Why do we use a card encryption on both interfaces (phiycal tunnel interface or interface)
2. when I remove the interface tunnel encryption card I have this message
( R2691 #* 01:12:54.243 Mar 1: ISAKMP: (1002): purge node 2144544879 )
Please tell me what is the meaning of this message
3. but I do not see vpn works great. It comes to cryto his and crypto isakmp his
R2691 #sh crypto ipsec his
Interface: Serial0/0
Crypto map tag: vpn, local addr 30.1.1.21
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (30.1.1.21/255.255.255.255/47/0)
Remote ident (addr, mask, prot, port): (10.1.1.1/255.255.255.255/47/0)
10.1.1.1 current_peer port 500
LICENCE, flags is {origin_is_acl},
#pkts program: 65, #pkts encrypt: 65, #pkts digest: 65
#pkts decaps: 66, #pkts decrypt: 66, #pkts check: 66
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors in #send 2, #recv 0 errors
local crypto endpt. : 30.1.1.21, remote Start crypto. : 10.1.1.1
Path mtu 1500, mtu 1500 ip, ip mtu IDB Serial0/0
current outbound SPI: 0xDBF65B0E (3690355470)
SAS of the esp on arrival:
SPI: 0x44FF512B (1157583147)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 5, flow_id: SW:5, crypto card: vpn
calendar of his: service life remaining (k/s) key: (4598427/3368)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0xDBF65B0E (3690355470)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 6, flow_id: SW:6, crypto card: vpn
calendar of his: service life remaining (k/s) key: (4598427/3368)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVE
outgoing ah sas:
outgoing CFP sas:
R2691 #sh crypto isakmp his
IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
30.1.1.21 10.1.1.1 QM_IDLE 1002 ASSETS 0
ISAKMP Crypto IPv6 security association.
How can 2: I know it using GRE over IPsec.
I also join my topology on which I made lab
Also beyond what I remember, in the old codes he was required to have a card encryption on tunnel and physical interface, but now is not.
Since we use GRE over IPSEC, so for the verification of the tunnel I'll do the following steps:
(1.) to check if the tunnel interface is in place. "show ip int br".
2.) check if the statistics of tunnel are increasing and packages are browsing through it. 'show interface '.
3.) check if crypto ACL includes only interesting traffic listed as GRE counterparts.
(4.) If Yes, check the IPSEC Security Association statistics. "See the crypto ipsec his."
If all of them are correct statistical evidence with respective counters increase traffic is passing by GRE and then by wrapping in IPSEC.
I hope this helps.
Kind regards
Anuj
-
Hello
I tried to set up the on ASA 5505-L2TP connection.
The phase 1 and Phase 2 are completed but Windows Client does not work.
This is the configuration:
Crypto ipsec transform-set L2TP-TS-SHA esp-3des esp-sha-hmac
Crypto ipsec transform-set transit mode L2TP-TS-SHADynamic crypto map VPNCLIENT 65535 value transform-set L2TP-TS-SHA
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS 192.168.1.2 192.168.1.14
Protocol-tunnel-VPN IPSec l2tp ipsec
the address value VPNClient-pool poolsattributes global-tunnel-group DefaultRAGroup
address VPNClient-pool pool
Group Policy - by default-DefaultRAGroup
password-management
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authenticationJournal:
dec 13 17:48:08 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, PHASE 2 COMPLETED (msgid = 00000002)
dec 13 17:48:08 [IKEv1]: rules of classification IKEQM_Active() Add L2TP: ip <195.234.233.126>mask <0xFFFFFFFF>port<15334>
dec 13 17:48:11 [IKEv1 DECODER]: IP = 195.234.233.126, IKE Responder starting QM: id msg = 00000003
dec 13 17:48:11 [IKEv1]: IP = 195.234.233.126, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR HASH (8) HIS (1) + (10) NUNCIO + ID (5) + ID (5) ++ NAT - OA (131) + NONE (0) overall length: 312
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, processing hash payload
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, SA payload processing
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, nonce payload processing
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:11 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
192.168.236.25
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID remote Proxy Host: address 195.234.233.126, Protocol 17, Port 0
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:11 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
94.88.180.84
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID local Proxy Host: address 172.16.34.1, Protocol 17 Port 1701
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, detected L2TP/IPSec session.
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload NAT Original address of treatment
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, QM IsRekeyed its already be regenerated
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, error QM WSF (P2 struct & 0xd7f0b8d0, mess id 0x3)!
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, case of mistaken IKE responder QM WSF (struct & 0xd7f0b8d0), 15334>0xFFFFFFFF>195.234.233.126>: QM_DONE EV_ERROR--> QM_BLD_MSG2 EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, sending clear/delete with the message of reason
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, peer table correlator Removing failed, no match!
dec 13 17:48:12 [IKEv1 DECODER]: IP = 195.234.233.126, IKE Responder starting QM: id msg = 00000003
dec 13 17:48:12 [IKEv1]: IP = 195.234.233.126, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR HASH (8) HIS (1) + (10) NUNCIO + ID (5) + ID (5) ++ NAT - OA (131) + NONE (0) overall length: 312
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, processing hash payload
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, SA payload processing
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, nonce payload processing
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:12 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
192.168.236.25
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID remote Proxy Host: address 195.234.233.126, Protocol 17, Port 0
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:12 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
94.88.180.84
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID local Proxy Host: address 172.16.34.1, Protocol 17 Port 1701
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, detected L2TP/IPSec session.
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload NAT Original address of treatment
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, QM IsRekeyed its already be regenerated
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, error QM WSF (P2 struct & 0xd8b55468, mess id 0x3)!
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, case of mistaken IKE responder QM WSF (struct & 0xd8b55468), : QM_DONE EV_ERROR--> QM_BLD_MSG2 EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, sending clear/delete with the message of reason
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, peer table correlator Removing failed, no match!Can someone help me pls?
Is behind a NAT device ASA? Also what version of the ASA are you running?
Also, make sure that the settings on the client are right according to this doc:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807213a7.shtml
-
Problem Cisco 2811 with L2TP IPsec VPN
Hello. Sorry for my English. Help me please. I have problem with L2TP over IPsec VPN when I connect with Android phones. Even if I connect with laptop computers. I have Cisco 2811 - Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (2) T2, (fc3) SOFTWARE VERSION. I configured on L2TP over IPsec VPN with Radius Authentication
My config:
!
AAA new-model
!
!
AAA authentication login default local
Ray of AAA for authentication ppp default local group
AAA authorization network default authenticated if
start-stop radius group AAA accounting network L2TP_RADIUS!
dhcp L2tp IP pool
network 192.168.100.0 255.255.255.0
default router 192.168.100.1
domain.local domain name
192.168.101.12 DNS server
18c0.a865.c0a8.6401 hexagonal option 121
18c0.a865.c0a8.6401 hexagonal option 249VPDN enable
!
VPDN-group sec_groupe
! Default L2TP VPDN group
accept-dialin
L2tp Protocol
virtual-model 1
no authentication of l2tp tunnelsession of crypto consignment
!
crypto ISAKMP policy 5
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 55
BA 3des
md5 hash
preshared authentication
Group 2ISAKMP crypto key... address 0.0.0.0 0.0.0.0
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto keepalive 10 periodicals
!
life crypto ipsec security association seconds 28000
!
Crypto ipsec transform-set esp-3des esp-sha-hmac L2TP
transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DESMD5
need transport mode
!!
!
crypto dynamic-map DYN - map 10
Set nat demux
game of transformation-L2TP
!
!
Crypto map 10 L2TP-VPN ipsec-isakmp dynamic DYN-mapinterface Loopback1
Description * L2TP GateWay *.
IP 192.168.100.1 address 255.255.255.255interface FastEthernet0/0
Description * Internet *.
address IP 95.6... 255.255.255.248
IP access-group allow-in-of-wan in
IP access-group allows-off-of-wan on
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
IP route cache policy
automatic duplex
automatic speed
L2TP-VPN crypto card
!interface virtual-Template1
Description * PPTP *.
IP unnumbered Loopback1
IP access-group L2TP_VPN_IN in
AutoDetect encapsulation ppp
default IP address dhcp-pool L2tp peer
No keepalive
PPP mtu Adaptive
PPP encryption mppe auto
PPP authentication ms-chap-v2 callin
PPP accounting L2TP_RADIUSL2TP_VPN_IN extended IP access list
permit any any icmp echo
IP 192.168.100.0 allow 0.0.0.255 192.168.101.0 0.0.0.255
IP 192.168.100.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
allow udp any any eq bootps
allow udp any any eq bootpc
deny ip any any journal entryRADIUS-server host 192.168.101.15 auth-port 1812 acct-port 1813
RADIUS server retry method reorganize
RADIUS server retransmit 2
Server RADIUS 7 key...Debugging shows me
234195: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet dport 500 sport 500 SA NEW Global (N)
234196: * 3 Feb 18:53:38: ISAKMP: created a struct peer 93.73.161.229, peer port 500
234197: * 3 Feb 18:53:38: ISAKMP: new position created post = 0x47D305BC peer_handle = 0x80007C5F
234198: * 3 Feb 18:53:38: ISAKMP: lock struct 0x47D305BC, refcount 1 to peer crypto_isakmp_process_block
234199: * 3 Feb 18:53:38: ISAKMP: 500 local port, remote port 500
234200: * 3 Feb 18:53:38: insert his with his 480CFF64 = success
234201: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234202: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1
234203: * 3 Feb 18:53:38: ISAKMP: (0): treatment ITS payload. Message ID = 0
234204: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234205: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234206: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234207: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234208: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234209: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234210: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234211: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234212: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234213: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234214: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234215: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234216: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234217: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234218: * 3 Feb 18:53:38: ISAKMP: (0): success
234219: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234220: * 3 Feb 18:53:38: ISAKMP: (0): pre-shared key local found
234221: * 3 Feb 18:53:38: ISAKMP: analysis of the profiles for xauth...
234222: * 3 Feb 18:53:38: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5
234223: * 3 Feb 18:53:38: ISAKMP: type of life in seconds
234224: * 3 Feb 18:53:38: ISAKMP: life (basic) of 28800
234225: * 3 Feb 18:53:38: ISAKMP: 3DES-CBC encryption
234226: * 3 Feb 18:53:38: ISAKMP: pre-shared key auth
234227: * 3 Feb 18:53:38: ISAKMP: SHA hash
234228: * 3 Feb 18:53:38: ISAKMP: group by default 2
234229: * 3 Feb 18:53:38: ISAKMP: (0): atts are acceptable. Next payload is 3
234230: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234231: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234232: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234233: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234234: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234235: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234236: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234237: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234238: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234239: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234240: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234241: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234242: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234243: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234244: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1234245: * 3 Feb 18:53:38: ISAKMP: (0): built the seller-02 ID NAT - t
234246: * 3 Feb 18:53:38: ISAKMP: (0): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_SA_SETUP
234247: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234248: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2234249: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet 500 Global 500 (R) sport dport MM_SA_SETUP
234250: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234251: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3234252: * 3 Feb 18:53:38: ISAKMP: (0): processing KE payload. Message ID = 0
234253: * 3 Feb 18:53:38: crypto_engine: create DH shared secret
234254: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_DH_SHARE_SECRET (hw) (ipsec)
234255: * 3 Feb 18:53:38: ISAKMP: (0): processing NONCE payload. Message ID = 0
234256: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234257: * 3 Feb 18:53:38: ISAKMP: (0): success
234258: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234259: * 3 Feb 18:53:38: crypto_engine: create IKE SA
234260: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_SA_CREATE (hw) (ipsec)
234261: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234262: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234263: * 3 Feb 18:53:38: ISAKMP (0:5912): NAT found, the node outside NAT
234264: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234265: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM3234266: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
234267: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234268: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM4234269: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) MM_KEY_EXCH sport
234270: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234271: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234272: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234273: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM4 = IKE_R_MM5234274: * 3 Feb 18:53:38: ISAKMP: (5912): payload ID for treatment. Message ID = 0
234275: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 192.168.1.218
Protocol: 17
Port: 500
Length: 12
234276: * 3 Feb 18:53:38: ISAKMP: (5912): peer games * no * profiles
234277: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID = 0
234278: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234279: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234280: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234281: * 3 Feb 18:53:38: ISAKMP: (5912): SA has been authenticated with 93.73.161.229
234282: * 3 Feb 18:53:38: ISAKMP: (5912): port detected floating port = 4500
234283: * 3 Feb 18:53:38: ISAKMP: attempts to insert a peer and inserted 95.6.../93.73.161.229/4500/ 47D305BC successfully.
234284: * 3 Feb 18:53:38: ISAKMP: (5912): IKE_DPD is enabled, the initialization of timers
234285: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234286: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_R_MM5234287: * 3 Feb 18:53:38: ISAKMP: (5912): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
234288: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 95.6...
Protocol: 17
Port: 0
Length: 12
234289: * 3 Feb 18:53:38: ISAKMP: (5912): the total payload length: 12
234290: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234291: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234292: * 3 Feb 18:53:38: crypto_engine: package to encrypt IKE
routerindc #.
234293: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234294: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) MM_KEY_EXCH
234295: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234296: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE234297: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
234298: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234299: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234300: * 3 Feb 18:53:38: ISAKMP: node set-893966165 to QM_IDLE
234301: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234302: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234303: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234304: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234305: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID =-893966165
234306: * 3 Feb 18:53:38: ISAKMP: (5912): treatment protocol NOTIFIER INITIAL_CONTACT 1
SPI 0, message ID =-893966165, his 480CFF64 =
234307: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234308: * 3 Feb 18:53:38: ISAKMP: (5912): process of first contact.
dropping existing phase 1 and 2 with 95.6 local... 93.73.161.229 remote remote port 4500
234309: * 3 Feb 18:53:38: ISAKMP: (5912): node-893966165 error suppression FALSE reason 'informational (en) State 1.
234310: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
234311: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234312: * 3 Feb 18:53:38: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234313: * 3 Feb 18:53:39: % s-6-IPACCESSLOGRL: registration of limited or missed rates 150 packages of access list
234314: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234315: * 3 Feb 18:53:39: ISAKMP: node set-1224389198 to QM_IDLE
234316: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234317: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234318: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234319: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234320: * 3 Feb 18:53:39: ISAKMP: (5912): HASH payload processing. Message ID =-1224389198
234321: * 3 Feb 18:53:39: ISAKMP: (5912): treatment ITS payload. Message ID =-1224389198
234322: * 3 Feb 18:53:39: ISAKMP: (5912): proposal of IPSec checking 1
234323: * 3 Feb 18:53:39: ISAKMP: turn 1, ESP_3DES
234324: * 3 Feb 18:53:39: ISAKMP: attributes of transformation:
234325: * 3 Feb 18:53:39: ISAKMP: type of life in seconds
234326: * 3 Feb 18:53:39: ISAKMP: life of HIS (basic) of 28800
234327: * 3 Feb 18:53:39: ISAKMP: program is 61444 (Transport-UDP)
234328: * 3 Feb 18:53:39: ISAKMP: authenticator is HMAC-SHA
234329: * 3 Feb 18:53:39: CryptoEngine0: validate the proposal
234330: * 3 Feb 18:53:39: ISAKMP: (5912): atts are acceptable.
234331: * 3 Feb 18:53:39: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 95.6..., distance = 93.73.161.229,.
local_proxy = 95.6.../255.255.255.255/17/1701 (type = 1),
remote_proxy = 93.73.161.229/255.255.255.255/17/0 (type = 1),
Protocol = ESP, transform = esp-3des esp-sha-hmac (UDP Transport),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0
234332: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234333: * 3 Feb 18:53:39: ISAKMP: (5912): processing NONCE payload. Message ID =-1224389198
234334: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234335: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234336: * 3 Feb 18:53:39: ISAKMP: (5912): ask 1 spis of ipsec
234337: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234338: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_READY = IKE_QM_SPI_STARVE
234339: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234340: * 3 Feb 18:53:39: IPSEC (spi_response): spi getting 834762579 for SA
of 95.6... to 93.73.161.229 for prot 3
234341: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234342: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234343: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
routerindc #.
234344: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234345: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
234346: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234347: * 3 Feb 18:53:39: ISAKMP: (5912): establishing IPSec security associations
234348: * 3 Feb 18:53:39: from 93.73.161.229 to 95.6 SA... (f / i) 0 / 0
(93.73.161.229 to 95.6 proxy...)
234349: * 3 Feb 18:53:39: spi 0x31C17753 and id_conn a 0
234350: * 3 Feb 18:53:39: life of 28800 seconds
234351: * 3 Feb 18:53:39: ITS 95.6 outgoing... to 93.73.161.229 (f / i) 0/0
(proxy 95.6... to 93.73.161.229)
234352: * 3 Feb 18:53:39: spi 0x495A4BD and id_conn a 0
234353: * 3 Feb 18:53:39: life of 28800 seconds
234354: * 3 Feb 18:53:39: crypto_engine: package to encrypt IKE
234355: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234356: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234357: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234358: * 3 Feb 18:53:39: IPSec: rate allocated for brother 80000273 Flow_switching
234359: * 3 Feb 18:53:39: IPSEC (policy_db_add_ident): 95.6..., src dest 93.73.161.229, dest_port 4500234360: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 95.6..., sa_proto = 50.
sa_spi = 0x31C17753 (834762579).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1165
234361: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 93.73.161.229, sa_proto = 50,.
sa_spi = 0x495A4BD (76915901).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1166
234362: * 3 Feb 18:53:39: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) QM_IDLE
234363: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
234364: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_SPI_STARVE = IKE_QM_R_QM2
234365: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234366: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234367: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234368: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234369: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
routerindc #.
234370: * 3 Feb 18:53:39: ISAKMP: (5912): node-1224389198 error suppression FALSE reason 'QM (wait).
234371: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234372: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
234373: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234374: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): rec would notify of ISAKMP
234375: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): select SA with spinnaker 76915901/50
234376: * 3 Feb 18:53:40: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234377: * 3 Feb 18:53:42: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234378: * 3 Feb 18:53:44: IPSEC (epa_des_crypt): decrypted packet has no control of her identityAlso when I connect with the phone, I see HIS Active and IPsec tunnel is mounted, but the wire of time tunnel is down and phone connects.
I hope that you will help me. Thank you.
Hi dvecherkin1,
Who IOS you're running, you could hit the next default.
https://Tools.Cisco.com/bugsearch/bug/CSCsg34166/?reffering_site=dumpcr
It may be useful
-Randy-
Evaluate the ticket to help others find the answer quickly.
-
Router configuration Cisco for the IPSec VPN with VPN in Windows 7 builtin client
Where can I find an example config for IPSec VPN where Windows 7 native client to connect to the Cisco routers. I use the cisco 881w, in this case.
Thomas McLeod
Native Client Windows supports only L2TP over IPSec. Example at the end of this doc may be enough for you:
I've not personally configured L2TP/IPSec on IOS, only on ASA, so cannot be 100% sure that the config in the link works, but the general idea should be ok.
-
Intercept-dhcp works to tunnel L2TP through IPsec ASA?
Hello
Is there anyone in the world operating a tunnel L2TP through IPsec on Cisco ASA for the native Windows clients and a Tunnel Split Configuration fully functional?
I created a tunnel L2TP through IPsec on the ASA 5520 9.1 (6) Version of the software running. My configuration is:
mask 172.23.32.1 - 172.23.33.255 255.255.252.0 IP local pool VPN_Users
ROUTING_SPLIT list standard access allowed 192.168.0.0 255.255.0.0
ROUTING_SPLIT list standard access allowed 172.16.0.0 255.248.0.0Crypto ipsec transform-set esp-aes-256 WIN10, esp-sha-hmac ikev1
transport mode encryption ipsec transform-set WIN10 ikev1
Crypto ipsec transform-set esp-3des esp-sha-hmac WIN7 ikev1
Crypto ipsec transform-set transport WIN7 using ikev1
Dynamic crypto map DYNMAP 10 set transform-set WIN10 WIN7 ikev1
Crypto dynamic-map DYNMAP 10 the value reverse-road
card crypto CMAP 99-isakmp dynamic ipsec DYNMAP
CMAP interface ipsec crypto mapCrypto isakmp nat-traversal 29
crypto ISAKMP disconnect - notify
Ikev1 enable ipsec crypto
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
output
IKEv1 crypto policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
outputinternal EIK_USERS_RA group policy
EIK_USERS_RA group policy attributes
value of 12.34.56.7 DNS Server 12.34.56.8
VPN - connections 2
L2TP ipsec VPN-tunnel-Protocol ikev1
disable the password-storage
enable IP-comp
enable PFS
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ROUTING_SPLIT
ad.NYME.Hu value by default-field
Intercept-dhcp enable
the authentication of the user activation
the address value VPN_Users pools
outputattributes global-tunnel-group DefaultRAGroup
authentication-server-group challenger
accounting-server-group challenger
Group Policy - by default-EIK_USERS_RA
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
outputNow, the native Windows clients can connect using this group of tunnel:
our - asa # show remote vpn-sessiondb
Session type: IKEv1 IPsec
User name: w10vpn Index: 1
Assigned IP: 172.23.32.2 public IP address: 12.34.56.9
Protocol: IKEv1 IPsecOverNatT L2TPOverIPsecOverNatT
License: Another VPN
Encryption: IKEv1: (1) 3DES IPsecOverNatT: (1) L2TPOverIPsecOverNatT AES256: (1) no
Hash: IKEv1: (1) IPsecOverNatT SHA1: (1) L2TPOverIPsecOverNatT SHA1: (1) no
TX Bytes: 1233 bytes Rx: 10698
Group Policy: Group EIK_USERS_RA Tunnel: DefaultRAGroup
Connect time: 15:12:29 UTC Friday, April 8, 2016
Duration: 0: 00: 01:00
Inactivity: 0 h: 00 m: 00s
Result of the NAC: unknown
Map VLANS: VLAN n/a: noHowever, real communication takes place above the tunnel if I 'Gateway on remote network use default'. If I disable this option among the preferences of the IPv4 of the virtual interface of VPN in Control Panel as described in the section 'Configuration of Tunnel of Split' of This DOCUMENT then Windows sends all packets through the channel, because it fails to extract from the ASA routing table. Split routing works perfectly when using legacy Cisco VPN Client with the same group policy, but does not work with L2TP over IPsec.
As far as I can see, the 'intercept-dhcp' option is inefficient somehow. I even managed to intercept packets of the PPP virtual machine Windows XP interface, and I saw that windows sends its DHCP INFORM requests, but the ASA does not. My question is why?
-J' made a mistake in the above configuration?
-Can there be one option somewhere else in my config running that defuses intercept-dhcp?
- Or is there a software bug in my version of firmware ASA? (BTW, I tried with several versions of different software without success?
Hi, I have the same problem you have, but I was lucky enough to be able to install version 9.2 (4) on which this feature works very well. I'm suspecting that it is a bug, but I need to dig a little deeper. If I find something interesting I'll share it here.
-
Connect an android tablet to IPsec VPN
The company that I work uses a router Cisco ASA 5510. We have currently a set IPsec VPN in place and useres connect through the VPN Ciso client using Group authentication, then he is invited for a user name and password and use the same username/password with which they log their work computers. Some users have recently got Samsung Galaxy 10.1 Tablet and wish to connect to the VPN using these tablets, but I can't figure out how to get the pills to work. I tried the app for the Android market as well as anyconnect to create a VPN in the Tablet Settings page, but no luck so be it. Maybe, I'm not in a right frame? One had luck getting andriod tablet to connect to a VPN Cisoc?
Thank you
Hello
This has been discussed rececntly here and I'm sure Atri wrote an article how to connect the Andorid devices to ASA on l2tp over IPsec:
https://supportforums.Cisco.com/docs/doc-17798
Just the need of version on the SAA.
Mind also that your ASA will need to connect Anyconnect on mobile platforms to ASA 'mobile anyconnect' license.
Marcin
-
IPsec VPN between two routers - mode ESP Transport and Tunnel mode
Hi experts,
I have this question about the Transport mode and Tunnel mode for awhile.
Based on my understanding of 'Transport' mode is not possible because you always original "internal" private in the IP headers or IP addresses. They are always different as public IP on interfaces enabled with Crypto Card addresses. When encapsulated in the VPN tunnel, the internal IP addresses must be included or the remote VPN router won't know where to forward the packet.
To test, I built a simple GNS3 with three routers laboratory. R1 and R3 are configured as VPN routers and the R2 must simulate Internet.
My configs are also very basic. The R2 is routing between 1.1.1.0/24 and 2.2.2.0/24. It is defined as the gateway of R1 and R3.
R1:
crypto ISAKMP policy 100
BA aes
preshared authentication
Group 2
ISAKMP crypto key 123456 address 2.2.2.2
!
Crypto ipsec transform-set ESP_null null esp esp-sha-hmac
!
10 map ipsec-isakmp crypto map
defined peer 2.2.2.2
transformation-ESP_null game
match address VPN!
list of IP - VPN access scope
ip permit 192.168.1.0 0.0.0.255 10.0.0.0 0.0.0.255
!R3:
crypto ISAKMP policy 100
BA aes
preshared authentication
Group 2
ISAKMP crypto key 123456 address 1.1.1.2
!
!
Crypto ipsec transform-set ESP_null null esp esp-sha-hmac
!
10 map ipsec-isakmp crypto map
defined peer 1.1.1.2
transformation-ESP_null game
match address VPN!
list of IP - VPN access scope
Licensing ip 10.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255I configured transform-"null" value, while it will not encrypt the traffic.
Then I tried the two 'transport' mode and mode "tunnel". I ping a host in the internal network of the R1 to another host in the internal network of the R3. I also tried 'telnet'. I also captured packets and carefully compared in both modes.
Packets encapsulated in exactly the same way!
It's just SPI + sequence No. +
+ padding I will attach my screenshots here for you guys to analyze it. I would be grateful for any explanation. I confused maybe just when it comes to the NAT...
I guess my next step is to check if the two modes to make the difference when the GRE is used.
Thank you
Difan
Hi Difan,
As you point out the mode of transport is not always applicable (i.e. applicable if IP source and destination is equal to corresnpoding proxy IDs).
A typical scenario in this mode of transport is used:
-Encryption between two hosts
-GRE tunnels
-L2TP over IPsec
Even if you set "transport mode" this does not mean that it will be used. IOS routers and I blieve also ASA will perform backup even if the mode of transport is configured but does not apply in tunnel mode.
I can take a look at your traces to sniff, but all first can you please check if you transport mode on your ipsec security associations? "See the crypto ipsec his" exit you will show the tunnel or transport mode.
HTH,
Marcin
-
VPN between ASA and cisco router [phase2 question]
Hi all
I have a problem with IPSEC VPN between ASA and cisco router
I think that there is a problem in the phase 2
Can you please guide me where could be the problem.
I suspect questions ACL on the router, but I cannot fix. ACL on the router is specified belowLooking forward for your help
Phase 1 is like that
Cisco_router #sh crypto isakmp his
IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
78.x.x.41 87.x.x.4 QM_IDLE 2006 0 ACTIVEand ASA
ASA # sh crypto isakmp his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 11 peer IKE: 78.x.x.41
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVEPhase 2 on SAA
ASA # sh crypto ipsec his
Interface: Outside
Tag crypto map: Outside_map, seq num: 20, local addr: 87.x.x.4Outside_cryptomap_20 ip 172.19.209.0 access list allow 255.255.255.0 172.
19.194.0 255.255.255.0
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer: 78.x.x.41#pkts program: 8813, #pkts encrypt: 8813, #pkts digest: 8813
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 8813, model of #pkts failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 87.x.x.4, remote Start crypto. : 78.x.x.41
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: C96393ABSAS of the esp on arrival:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4275000/3025)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4274994/3023)
Size IV: 8 bytes
support for replay detection: YPhase 2 on cisco router
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x0 (0)SAS of the esp on arrival:
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
outgoing ah sas:
outgoing CFP sas:
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 8947, #pkts decrypt: 8947, #pkts check: 8947
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x3E9D820B (1050509835)SAS of the esp on arrival:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 29, flow_id: Motorola SEC 1.0:29, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4393981/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 30, flow_id: Motorola SEC 1.0:30, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4394007/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
VPN configuration is less in cisco router
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 101 permit ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 101 permit ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 101 permit ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connectaccess-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 105 deny ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 105 deny ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 105 deny ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connectsheep allowed 10 route map
corresponds to the IP 105Crypto ipsec transform-set esp-3des esp-md5-hmac mytransformset
mycryptomap 100 ipsec-isakmp crypto map
the value of 87.x.x.4 peer
Set transform-set mytransformset
match address 101crypto ISAKMP policy 100
BA 3des
md5 hash
preshared authentication
Group 2
ISAKMP crypto key xxx2011 address 87.x.x.4Your permit for 105 ACL statement should be down is changed to match because it is the most general ACL.
You currently have:
Extend the 105 IP access list
5 permit ip 172.19.194.0 0.0.0.255 (18585 matches)
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connectIt should be:
Extend the 105 IP access list
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connectIP 172.19.194.0 allow 60 0.0.0.255 (18585 matches)
To remove it and add it to the bottom:
105 extended IP access list
not 5
IP 172.19.194.0 allow 60 0.0.0.255 any
Then ' delete ip nat trans. "
and it should work now.
-
Support for L2TP/IpSec VPN on 1921
Hello
I am not able to find an answer on something very simple... Fact of 1921 Cisco router supports L2TP/IpSec VPN connections? (from Windows 7 clients)
If she could please point me to the right location/document where I can read more about it.
I already tried with the configuration below, but command ppp under a virtual-Template1 don't output interface.
Thank you very much for your answers.
Kind regards
Herman
# VPN configuration I've tried, but it did not work.
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
life 4000
ISAKMP crypto key xxxxxxx address X.X.X.X (ip strongvpn)
!
!
Crypto ipsec transform-set ESP-AES256-SHA1 esp - aes 256 esp-sha-hmac
transport mode
!
Map 10 IPSEC L2TP ipsec-isakmp crypto
defined peer X.X.X.X
game of transformation-ESP-AES256-SHA1
match address 101
!
!
!
Pseudowire-class pwclass1
encapsulation l2tpv2
local IP interface FastEthernet0/0
PMTU IP
!
!
!
!
interface FastEthernet0/0
DHCP IP address
automatic duplex
automatic speed
card crypto IPSEC L2TP
!
interface FastEthernet0/1
IP 10.20.20.1 255.255.255.0
IP nat inside
IP virtual-reassembly
automatic duplex
automatic speed
!
interface Serial0/0/0
no ip address
Shutdown
!
interface Serial0/1/0
no ip address
Shutdown
2000000 clock frequency
!
virtual-PPP1 interface
the negotiated IP address
IP mtu 1399
NAT outside IP
IP virtual-reassembly max-pumping 64
No cdp enable
PPP authentication ms-chap-v2 callin
PPP chap hostname vpnxxx
PPP chap password 0 xxxxxxxxxx
Pseudowire pw-class 1, pwclass1 X.X.X.X
##################################################################################################################
Cisco-gw #show version
Cisco IOS software, software C1900 (C1900-UNIVERSALK9-M), Version 15.2 (4) M2, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Updated Thursday, November 7, 12 and 12:45 by prod_rel_team
ROM: System Bootstrap, Version 15.0 M16 (1r), RELEASE SOFTWARE (fc1)
Cisco-gw uptime is 2 days, 4 hours, 22 minutes
System to regain the power ROM
System restart to 09:11:07 PCTime Tuesday, April 2, 2013
System image file is "usbflash0:c1900 - universalk9-mz.» Spa. 152 - 4.M2.bin.
Last reload type: normal charging
Reload last reason: power
This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.
A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html
If you need assistance please contact us by mail at
Cisco CISCO1921/K9 (revision 1.0) with 491520K / 32768K bytes of memory.
Card processor ID FCZ170793UH
2 gigabit Ethernet interfaces
1 line of terminal
1 module of virtual private network (VPN)
Configuration of DRAM is 64 bits wide with disabled parity.
255K bytes of non-volatile configuration memory.
249840K bytes of Flash usbflash0 (read/write)
License info:
License IDU:
-------------------------------------------------
Device SN # PID
-------------------------------------------------
* 0 CISCO1921/K9
Technology for the Module package license information: "c1900".
-----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
------------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
Security securityk9 Permanent securityk9
given none none none
Configuration register is 0 x 2102
Yes, it is supported.
It is necessary to configure the encapsulation under virtual-model.
Note: you will have much better results by using the IPSec VPN or SSL VPN client AnyConnect client.
-
Router Cisco 1941 - crypto isakmp policy command missing - IPSEC VPN
Hi all
I was looking around and I can't find the command 'crypto isakmp policy' on this router Cisco 1941. I wanted to just a regular Lan IPSEC to surprise and Lan installation tunnel, the command isn't here. Have I not IOS bad? I thought that a picture of K9 would do the trick.
Any suggestions are appreciated
That's what I get:
Router (config) #crypto?
CA Certification Authority
main activities key long-term
public key PKI componentsSEE THE WORM
Cisco IOS software, software C1900 (C1900-UNIVERSALK9-M), Version 15.0 (1) M2, VERSION of the SOFTWARE (fc2)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Updated Thursday, March 10, 10 22:27 by prod_rel_teamROM: System Bootstrap, Version 15.0 M6 (1r), RELEASE SOFTWARE (fc1)
The availability of router is 52 minutes
System returned to ROM by reload at 02:43:40 UTC Thursday, April 21, 2011
System image file is "flash0:c1900 - universalk9-mz.» Spa. 150 - 1.M2.bin.
Last reload type: normal charging
Reload last reason: reload commandThis product contains cryptographic features...
Cisco CISCO1941/K9 (revision 1.0) with 487424K / 36864K bytes of memory.
Card processor ID FTX142281F4
2 gigabit Ethernet interfaces
2 interfaces Serial (sync/async)
Configuration of DRAM is 64 bits wide with disabled parity.
255K bytes of non-volatile configuration memory.
254464K bytes of system CompactFlash ATA 0 (read/write)License info:
License IDU:
-------------------------------------------------
Device SN # PID
-------------------------------------------------
* 0 FTX142281F4 CISCO1941/K9Technology for the Module package license information: "c1900".
----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
-----------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
security, none none none
given none none noneConfiguration register is 0 x 2102
You need get the license of security feature to configure the IPSec VPN.
Currently, you have 'none' for the security feature:
----------------------------------------------------------------
Technology-technology-package technology
Course Type next reboot
-----------------------------------------------------------------
IPBase ipbasek9 ipbasek9 Permanent
security, none none none
given none none noneHere is the information about the licenses on router 1900 series:
-
RV180 and Cisco IPSec VPN client
Hi NetPro,
RV180 router supports VPN client using the regular Cisco VPN client connections?
Data sheet says it works with client QuickVPN. If the regular non-Quick client is not supported, both clients can coexist (= be installed simultaneously) on the same PC?
Is supported customer QuickVPN split tunneling?
Thank you!
Lubomir
Lubomir Hello,
The RV180 currently supports QuickVPN and PPTP VPN connections. It also has the IPSec tunnel as well, but it does not support the Cisco VPN client.
I saw a question have Cisco VPN and the QuickVPN installed on the same computer.
The QuickVPN client supports only split tunneling.
I hope that answers your questions.
Maybe you are looking for
-
Can save image only as a bitmap file
For some reason when I now right click on an image and then go to send to "My pictures" I get only the options to save as a file art or bitmap file. can someone help so I can save it as a Gif file as I have always in the past
-
When I print on a page size 6 x 8 inch using black ink, the time taken to print the page is 1 Minute 40 seconds. It is indeed very slow! When I print the same exact pages on A4, the time taken to print the page is 15 seconds. This is acceptable! I us
-
Hi all. I hope that there is someone out there who can help me. I am running Windows 7 Ultimate and NIS 2010. I have the following problem. When you play LAN (game of who he is, whatever) I can't find hosted servers or conect at all. I can however co
-
During the installation and activation of google chrome, I lost my taskbar
Original title: Google Chrome during the installation and activation of google chrome, I lost my taskbar. How can I reinstall my taskbar?
-
When I start my pc the screen is black
Compaq presario cq57 windows 7 Well I just became familiar with my new laptop computer and I have clickd'autant on the projector or start my projector and now the black start screen and I don't know how to solve this problem, I am running in safe mod