Microsoft L2TP over IPSEC client with AES encryption
I configured L2TP over IPSec Cisco VPN router with Hastings 3des encryption is sha1 with diffie hellman Group 2 and I can't connect with success of Microsoft customers.
but my question is why can I not connect when I am increasing the encryption with AES 256 and sha256 DH group 14, his looks that windows does not support advanced encryption.
is it possiple to activate encryption aes with the highest level...? and how?.
Hello
To ensure that you get the best response to your concerns, we suggest that publish this request via the Web to Microsoft Developer network site. To do this, visit this link.
Best regards.
Tags: Windows
Similar Questions
-
Problem of authenticating users on L2TP over IPSec tunnel
I have a client with an old PIX-515e firewall with firmware 7.2 (4), and due to certain circumstances, I'm trying to configure L2TP over IPSec. I'm stuck at a "Error 691: the remote connection has been deinied because the user name and password combination, you have provided is not recognized, or the selected authentication protocol is not permitted on the remote access server." I have local installation of authentication for this connection, and I tried to use ms-chap-v2, chap and pap, and give the same results. I have confirmed the username and the password, but I can't after that.
The PIX, I don't see "AAA user authenticaton rejected: reason = invalid password: local database: user = tetstuser". I can still see the password unencrypted on the screen, so I can copy and paste the username and password in the appropriate fields, and I still have this error.
Does anyone have an idea where the problem lies perhaps? Thank you.
Can you please change the user as described in the doc, I shared and as indicated by the Rohan peers and share the results of the tests?
Kind regards
Dinesh Moudgil
PS Please rate helpful messages.
-
L2TP over IPSEC VPN is supported in Cisco SRP 521w?
I now try to configure a Cisco Small Business Pro SRP 521w for a branch office router, I try to get the router to connect to a VPN L2TP server inside my data center, but it seems to me that the client VPN L2TP function is not supported within the SRP 521w router.
Can Cisco implementing in the future in the firmware for the router in SRP 521w client VPN L2TP?
Hello
This is correct, without L2TP over IPSec tunnels.
(L2TP only supported on the primary Ethernet WAN interfaces).
Kind regards
Andy
-
Hello
I tried to set up the on ASA 5505-L2TP connection.
The phase 1 and Phase 2 are completed but Windows Client does not work.
This is the configuration:
Crypto ipsec transform-set L2TP-TS-SHA esp-3des esp-sha-hmac
Crypto ipsec transform-set transit mode L2TP-TS-SHADynamic crypto map VPNCLIENT 65535 value transform-set L2TP-TS-SHA
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS 192.168.1.2 192.168.1.14
Protocol-tunnel-VPN IPSec l2tp ipsec
the address value VPNClient-pool poolsattributes global-tunnel-group DefaultRAGroup
address VPNClient-pool pool
Group Policy - by default-DefaultRAGroup
password-management
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authenticationJournal:
dec 13 17:48:08 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, PHASE 2 COMPLETED (msgid = 00000002)
dec 13 17:48:08 [IKEv1]: rules of classification IKEQM_Active() Add L2TP: ip <195.234.233.126>mask <0xFFFFFFFF>port<15334>
dec 13 17:48:11 [IKEv1 DECODER]: IP = 195.234.233.126, IKE Responder starting QM: id msg = 00000003
dec 13 17:48:11 [IKEv1]: IP = 195.234.233.126, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR HASH (8) HIS (1) + (10) NUNCIO + ID (5) + ID (5) ++ NAT - OA (131) + NONE (0) overall length: 312
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, processing hash payload
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, SA payload processing
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, nonce payload processing
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:11 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
192.168.236.25
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID remote Proxy Host: address 195.234.233.126, Protocol 17, Port 0
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:11 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
94.88.180.84
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID local Proxy Host: address 172.16.34.1, Protocol 17 Port 1701
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, detected L2TP/IPSec session.
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload NAT Original address of treatment
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, QM IsRekeyed its already be regenerated
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, error QM WSF (P2 struct & 0xd7f0b8d0, mess id 0x3)!
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, case of mistaken IKE responder QM WSF (struct & 0xd7f0b8d0), 15334>0xFFFFFFFF>195.234.233.126>: QM_DONE EV_ERROR--> QM_BLD_MSG2 EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
dec 13 17:48:11 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, sending clear/delete with the message of reason
dec 13 17:48:11 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, peer table correlator Removing failed, no match!
dec 13 17:48:12 [IKEv1 DECODER]: IP = 195.234.233.126, IKE Responder starting QM: id msg = 00000003
dec 13 17:48:12 [IKEv1]: IP = 195.234.233.126, IKE_DECODE RECEIPT Message (msgid = 3) with payloads: HDR HASH (8) HIS (1) + (10) NUNCIO + ID (5) + ID (5) ++ NAT - OA (131) + NONE (0) overall length: 312
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, processing hash payload
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, SA payload processing
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, nonce payload processing
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:12 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
192.168.236.25
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID remote Proxy Host: address 195.234.233.126, Protocol 17, Port 0
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload processing ID
dec 13 17:48:12 [IKEv1 DECODER]: Group = DefaultRAGroup, IP = 195.234.233.126, ID_IPV4_ADDR received ID
94.88.180.84
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, data received in payload ID local Proxy Host: address 172.16.34.1, Protocol 17 Port 1701
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, detected L2TP/IPSec session.
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, payload NAT Original address of treatment
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, QM IsRekeyed its already be regenerated
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, error QM WSF (P2 struct & 0xd8b55468, mess id 0x3)!
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, case of mistaken IKE responder QM WSF (struct & 0xd8b55468), : QM_DONE EV_ERROR--> QM_BLD_MSG2 EV_IS_REKEY--> QM_BLD_MSG2, EV_CONFIRM_SA--> QM_BLD_MSG2, EV_PROC_MSG--> QM_BLD_MSG2, EV_HASH_OK--> QM_BLD_MSG2, NullEvent--> QM_BLD_MSG2, EV_COMP_HASH--> QM_BLD_MSG2, EV_VALIDATE_MSG
dec 13 17:48:12 [IKEv1 DEBUG]: Group = DefaultRAGroup, IP = 195.234.233.126, sending clear/delete with the message of reason
dec 13 17:48:12 [IKEv1]: Group = DefaultRAGroup, IP = 195.234.233.126, peer table correlator Removing failed, no match!Can someone help me pls?
Is behind a NAT device ASA? Also what version of the ASA are you running?
Also, make sure that the settings on the client are right according to this doc:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807213a7.shtml
-
Microsoft l2tp IPSec VPN site to site ASA on top
I have a specialized applications casino that requires end-to-end encryption. I'm under the stack of Microsoft IPSec l2tp between my XP machine and my Windows 2003 server on the LAN. Can I use the same type of protocol stack Microsoft l2tp IPSec between my XP machine and the Windows Server 2003 a branch on the SAA to site to site ASA VPN tunnel? The VPN site-to site ASA is a type of key Preshare IPSec VPN tunnelle traffic between our head office and a branch in distance.
In other words, the ASA site-to-site IPSec VPN will allow Microsoft l2tp through IPSec encrypted traffic? My ACL tunnel would allow full IP access between site. Something like:
name 192.168.100.0 TexasSubnet
name 192.168.200.0 RenoSubnet
IP TexasSubnet 255.255.255.0 RenoSubnet 255.255.255.0 allow Access-list extended nat_zero
Hello
Yes, the L2TP can be encapsulated in IPSEC as all other traffic.
However, make sure that no NAT is performed on each end. L2TP is a default header protection which will see NAT as a falsification of package and reject it.
See you soon,.
Daniel
-
Router configuration Cisco for the IPSec VPN with VPN in Windows 7 builtin client
Where can I find an example config for IPSec VPN where Windows 7 native client to connect to the Cisco routers. I use the cisco 881w, in this case.
Thomas McLeod
Native Client Windows supports only L2TP over IPSec. Example at the end of this doc may be enough for you:
I've not personally configured L2TP/IPSec on IOS, only on ASA, so cannot be 100% sure that the config in the link works, but the general idea should be ok.
-
Intercept-dhcp works to tunnel L2TP through IPsec ASA?
Hello
Is there anyone in the world operating a tunnel L2TP through IPsec on Cisco ASA for the native Windows clients and a Tunnel Split Configuration fully functional?
I created a tunnel L2TP through IPsec on the ASA 5520 9.1 (6) Version of the software running. My configuration is:
mask 172.23.32.1 - 172.23.33.255 255.255.252.0 IP local pool VPN_Users
ROUTING_SPLIT list standard access allowed 192.168.0.0 255.255.0.0
ROUTING_SPLIT list standard access allowed 172.16.0.0 255.248.0.0Crypto ipsec transform-set esp-aes-256 WIN10, esp-sha-hmac ikev1
transport mode encryption ipsec transform-set WIN10 ikev1
Crypto ipsec transform-set esp-3des esp-sha-hmac WIN7 ikev1
Crypto ipsec transform-set transport WIN7 using ikev1
Dynamic crypto map DYNMAP 10 set transform-set WIN10 WIN7 ikev1
Crypto dynamic-map DYNMAP 10 the value reverse-road
card crypto CMAP 99-isakmp dynamic ipsec DYNMAP
CMAP interface ipsec crypto mapCrypto isakmp nat-traversal 29
crypto ISAKMP disconnect - notify
Ikev1 enable ipsec crypto
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
output
IKEv1 crypto policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
outputinternal EIK_USERS_RA group policy
EIK_USERS_RA group policy attributes
value of 12.34.56.7 DNS Server 12.34.56.8
VPN - connections 2
L2TP ipsec VPN-tunnel-Protocol ikev1
disable the password-storage
enable IP-comp
enable PFS
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ROUTING_SPLIT
ad.NYME.Hu value by default-field
Intercept-dhcp enable
the authentication of the user activation
the address value VPN_Users pools
outputattributes global-tunnel-group DefaultRAGroup
authentication-server-group challenger
accounting-server-group challenger
Group Policy - by default-EIK_USERS_RA
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
no authentication ms-chap-v1
ms-chap-v2 authentication
outputNow, the native Windows clients can connect using this group of tunnel:
our - asa # show remote vpn-sessiondb
Session type: IKEv1 IPsec
User name: w10vpn Index: 1
Assigned IP: 172.23.32.2 public IP address: 12.34.56.9
Protocol: IKEv1 IPsecOverNatT L2TPOverIPsecOverNatT
License: Another VPN
Encryption: IKEv1: (1) 3DES IPsecOverNatT: (1) L2TPOverIPsecOverNatT AES256: (1) no
Hash: IKEv1: (1) IPsecOverNatT SHA1: (1) L2TPOverIPsecOverNatT SHA1: (1) no
TX Bytes: 1233 bytes Rx: 10698
Group Policy: Group EIK_USERS_RA Tunnel: DefaultRAGroup
Connect time: 15:12:29 UTC Friday, April 8, 2016
Duration: 0: 00: 01:00
Inactivity: 0 h: 00 m: 00s
Result of the NAC: unknown
Map VLANS: VLAN n/a: noHowever, real communication takes place above the tunnel if I 'Gateway on remote network use default'. If I disable this option among the preferences of the IPv4 of the virtual interface of VPN in Control Panel as described in the section 'Configuration of Tunnel of Split' of This DOCUMENT then Windows sends all packets through the channel, because it fails to extract from the ASA routing table. Split routing works perfectly when using legacy Cisco VPN Client with the same group policy, but does not work with L2TP over IPsec.
As far as I can see, the 'intercept-dhcp' option is inefficient somehow. I even managed to intercept packets of the PPP virtual machine Windows XP interface, and I saw that windows sends its DHCP INFORM requests, but the ASA does not. My question is why?
-J' made a mistake in the above configuration?
-Can there be one option somewhere else in my config running that defuses intercept-dhcp?
- Or is there a software bug in my version of firmware ASA? (BTW, I tried with several versions of different software without success?
Hi, I have the same problem you have, but I was lucky enough to be able to install version 9.2 (4) on which this feature works very well. I'm suspecting that it is a bug, but I need to dig a little deeper. If I find something interesting I'll share it here.
-
Help, please! Microsoft Vs Cisco VPN Client VPN
Could someone please indicate if the Cisco VPN Client is safer than the VPN integrated Microsoft on windows XP? If the Cisco client is more secure than why? Microsoft it does not use IPSEC and PPTP right?
Please advise - very urgent!
I don't know a customer Cisco Cisco VPN concentrator is safer, but I'm not sure exactly why.
Carlton,
Take a deeper look at the same time, all your questions will be answered once you look at these links.
IPSec is a Cisco VPN standard, open customer or any customer VPN IPSec based should meet these standards. You'll learn more by reading these few bellow of links at the end of the reading you will be to have a better
perspective on the customer you would gear more to use as a professional network.
Personally, I've been away little by little PPTP and substituting Cisco VPN clients. Don't get me wrong, PPTP is still widely used there, but it is more vulnerable.
With Ipsec VPN, you have a wider choice of authentication algorithms, to base
granularity of ciphers as a way to implement a secure VPN extreamely for RA architecture
Introduction to IPsec
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a0080094203.shtml
Introduction to PPTP/L2TP
http://www.Clavister.com/manuals/ver8.6x/manual/VPN/pptp_basics.htm
Analysis of vulnerabilities and implementation MS PPTP
http://www.Schneier.com/paper-PPTP.html
http://www.Schneier.com/paper-PPTP.PDF
Alternative workaround to use client MS using L2TP over Ipsec
In addition, you can do a google search on "hacking PPTP" or "Ipsec" to preview more vulnerabilities.
Rgds
Jorge
-
Hello
I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:
"This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »
I tried to look for a solution, but I did not understand what Live Meeting I need to download.
Can you help me?
Thank you.
Original title: Live Meeting 2007
Hi Alex,
Thanks for posting your query in Microsoft Community.
I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.
FAQ: Live Meeting related topics media
Hope this information is useful. Let us know if you need more help, we will be happy to help you.
-
double authentication with Cisco's VPN IPSEC client
Cisco VPN client (the legacy IPSEC client) does support dual authentication with RSA token AND ActiveDirectory credentials?
I know that AnyConnect supports it and the commandsecondary- authentication -Server- group' is only for ssl connections, but must be confirmed.
Kind regards
Mohammad
Hi Mohammad,.
What is double authentication support for Cisco VPN Client?
A. No. Double authentication only is not supported on the Cisco VPN Client.
You can find more information on the customer Cisco VPN here.
As you said the only client that supports dual authentication is the Cisco AnyConnect secure mobility Client.
Please note and mark it as correct this Post!
Let me know if there are still questions about it!
David Castro,
-
[WRT160NL] Problem with the only AES encryption
Hello
I have problems after changing the shape of TKIP or AES to AES encryption. After that everything works OK for a few minutes, then I'm 100% loss when ping anything (including the router). After waiting a few minutes connection starts to work again, and everything is repeated. All the time I'm connected. If I reconnect everything works for a few minutes and then I'm once again, this situation. Return to TKIP or AES does not change this behavior until the reboot of the router. I've got second laptop computer connected through wired interface and it work without problem. My card is: Intel WiFi Link 5100. Settings on the router:
Firmware version: 1.00.01 B17 may 12, 2009
Network mode: wireless - n only
Channel width: wide angle: 40 MHz channel
Scale channel: Auto
Security mode: WPA2 Personal
Does anyone have similar problems? Any ideas?
Kind regards
Maciek
Try to re-flash the firmware on the router and re - configure the router from scratch. You can download the firmware from www.linksys.com/downloads.After re-flashing the firmware, reset the router for 30-35 seconds, power cycle the router and then re - configure from scratch.
-
Hi all
I am setting up IPSEC tunnel GRE... I am able to get neighbors OSPF looked through the GRE tunnel, but when traffic is sent through the gre tunnel it does not encrypt and transmit through plaintext despite she buy from loopback interfaces
Here is my config
Config of R1
crypto ISAKMP policy 10
BA aes
preshared authentication
Group 5
test key crypto isakmp 192.168.1.2 addressCrypto ipsec transform-set test aes - esp esp-sha-hmac
test card crypto-address Ethernet0/0
test 10 map ipsec-isakmp crypto
defined peer 192.168.1.2
Set transform-set test
match address WILLGRE extended IP access list
allow gre 10.0.10.0 0.0.0.255 10.0.20.0 0.0.0.255interface Ethernet0/0
No switchport
IP 192.168.1.1 255.255.255.0
crypto map testinterface Loopback0
IP 10.0.10.1 255.255.255.0
IP ospf 1 zone 0Tunnel1 interface
10.0.100.2 IP address 255.255.255.0
IP ospf 1 zone 0
source of tunnel Ethernet0/0
tunnel destination 192.168.1.1
end-----------------------------------------------------------
R2 configcrypto ISAKMP policy 10
BA aes
preshared authentication
Group 5
test key crypto isakmp 192.168.1.1 address
!
!
Crypto ipsec transform-set test aes - esp esp-sha-hmac
!
!
!
test card crypto-address Ethernet0/0
test 10 map ipsec-isakmp crypto
defined peer 192.168.1.1
Set transform-set test
match address GR
!GR extended IP access list
allow gre 10.0.20.0 0.0.0.255 10.0.10.0 0.0.0.255interface Ethernet0/0
No switchport
IP 192.168.1.2 255.255.255.0
crypto map testinterface Loopback0
IP 10.0.20.1 255.255.255.0
IP ospf 1 zone 0Tunnel1 interface
10.0.100.1 IP address 255.255.255.0
IP ospf 1 zone 0
source of tunnel Ethernet0/0
tunnel destination 192.168.1.2
end-------------------------------------------
Hello
With p2p GRE over IPsec solution, all traffic between sites is encapsulated in a GRE p2p package before the process of encryption.
More info on this link:
http://www.Cisco.com/c/en/us/TD/docs/solutions/Enterprise/WAN_and_MAN/P2...
Kind regards
Aditya
Please evaluate the useful messages and mark the correct answers.
-
IPSEC packets are not encrypted
Hello (and Happy Thanksgiving in the USA),
We recently switched our ASA and applied again the saved for the new device configuration. There is a VPN site-to site that works and a remote VPN client that does not work. We use certain Cisco VPN clients and some Shrew Soft VPN clients. I compared the config of the ASA again to that of ASA old and I can't find all the differences (but the remote client VPN was working on the old ASA). Remote clients connect and a tunnel is created, but they are unable to pass traffic. Systems on the network where the ASA are able to access the internet.
Out of sho isakmp crypto his (ignore peer #1, this is the site to site VPN work)
HIS active: 2
Generate a new key SA: 0 (a tunnel report Active 1 and 1 generate a new key ITS d)
Total SA IKE: 2
1 peer IKE: xx.168.155.98
Type: L2L role: answering machine
Generate a new key: no State: MM_ACTIVE
2 IKE peers: xx.211.206.48
Type: user role: answering machine
Generate a new key: no State: AM_ACTIVE
Output of sho crypto ipsec his (info about VPN site-to-site deleted). Packets are decrypted but unencrypted.
Tag crypto map: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: publi
c ip
local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
Remote ident (addr, mask, prot, port): (10.20.1.100/255.255.255.255/0/0)
current_peer: xx.211.206.48, username: me
dynamic allocated peer ip: 10.20.1.100
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 20, #pkts decrypt: 20, #pkts check: 20
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0
success #frag before: 0, failures before #frag: 0, #fragments created: 0
Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
#send errors: 0, #recv errors: 0
endpt local crypto. : public-ip/4500, crypto endpt distance. : xx.211.206.48/4
500
Path mtu 1500, fresh ipsec generals 82, media, mtu 1500
current outbound SPI: 7E0BF9B9
current inbound SPI: 41B75CCD
SAS of the esp on arrival:
SPI: 0x41B75CCD (1102535885)
transform: aes - esp esp-sha-hmac no compression
running parameters = {RA, Tunnel, NAT-T program,}
slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP
calendar of his: service life remaining key (s): 28776
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
SPI: 0xC06BF0DD (3228299485)
transform: aes - esp esp-sha-hmac no compression
running parameters = {RA, Tunnel, NAT-T program Rekeyed}
slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP
calendar of his: service life remaining key (s): 28774
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x000003FF 0xFFF80001
outgoing esp sas:
SPI: 0x7E0BF9B9 (2114714041)
transform: aes - esp esp-sha-hmac no compression
running parameters = {RA, Tunnel, NAT-T program,}
slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP
calendar of his: service life remaining key (s): 28774
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
SPI: 0xCBF945AC (3422111148)
transform: aes - esp esp-sha-hmac no compression
running parameters = {RA, Tunnel, NAT-T program Rekeyed}
slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP
calendar of his: service life remaining key (s): 28772
Size IV: 16 bytes
support for replay detection: Y
Anti-replay bitmap:
0x00000000 0x00000001
Config of ASA
: Saved
: Written by me at 19:56:37.957 pst Tuesday, November 26, 2013
!
ASA Version 8.2 (4)
!
hostname mfw01
domain company.int
enable encrypted password xxx
XXX encrypted passwd
names of
Name xx.174.143.97 description cox cox-gateway Gateway
name 172.16.10.0 iscsi-description iscsi network
name 192.168.1.0 network heritage heritage network description
name 10.20.50.0 management-description management network
name 10.20.10.0 network server server-description
name 10.20.20.0 user-network description user-network
name 192.168.1.101 private-em-imap description private-em-imap
name 10.20.10.2 description of private Exchange private-Exchange
name 10.20.10.3 description of private-private ftp ftp
name 192.168.1.202 description private-private-ip-phones ip phones,
name 10.20.10.6 private-kaseya kaseya private description
name 192.168.1.2 private mitel 3300 description private mitel 3300
name 10.20.10.1 private-pptp pptp private description
name 10.20.10.7 private-sharepoint description private-sharepoint
name 10.20.10.4 private-tportal private-tportal description
name 10.20.10.8 private-xarios private-xarios description
name 192.168.1.215 private-xorcom description private-xorcom
Name xx.174.143.99 description public Exchange public-Exchange
public xx.174.143.100 public-ftp ftp description name
Name xx.174.143.101 public-tportal public tportal description
Name xx.174.143.102 public-sharepoint description public-sharepoint
name of the public ip description public-ip-phones-phones xx.174.143.103
name mitel-public-3300 xx.174.143.104 description public mitel 3300
Name xx.174.143.105 public-xorcom description public-xorcom
xx.174.143.108 public-remote control-support name description public-remote control-support
Name xx.174.143.109 public-xarios public xarios description
Name xx.174.143.110 public-kaseya kaseya-public description
Name xx.174.143.111 public-pptp pptp-public description
name Irvine_LAN description Irvine_LAN 192.168.2.0
Name xx.174.143.98 public-ip
name 10.20.10.14 private-RevProxy description private-RevProxy
Name xx.174.143.107 public-RevProxy description public RevProxy
name 10.20.10.9 private-XenDesktop description private-XenDesktop
Name xx.174.143.115 public-XenDesktop description public-XenDesktop
name 10.20.1.1 private-bridge description private-bridge
name 192.168.1.96 description private-remote control-support private-remote control-support
!
interface Ethernet0/0
public nameif
security-level 0
IP address public ip 255.255.255.224
!
interface Ethernet0/1
Speed 100
full duplex
nameif private
security-level 100
address private-gateway IP, 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
the IP 192.168.0.1 255.255.255.0
management only
!
passive FTP mode
clock timezone pst - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain mills.int
object-group service ftp
the tcp eq ftp service object
the purpose of the tcp eq ftp service - data
object-group service DM_INLINE_SERVICE_1
Group-object ftp
the eq tftp udp service object
DM_INLINE_TCP_1 tcp service object-group
port-object eq 40
EQ port ssh object
object-group service web-server
the purpose of the service tcp eq www
the eq https tcp service object
object-group service DM_INLINE_SERVICE_2
EQ-tcp smtp service object
object-group web server
object-group service DM_INLINE_SERVICE_3
EQ-ssh tcp service object
object-group web server
object-group service kaseya
the purpose of the service tcp eq 4242
the purpose of the service tcp 5721 eq
EQ-8080 tcp service object
the eq 5721 udp service object
object-group service DM_INLINE_SERVICE_4
Group-object kaseya
object-group web server
object-group service DM_INLINE_SERVICE_5
will the service object
the eq pptp tcp service object
object-group service VPN
will the service object
ESP service object
the purpose of the service ah
the eq pptp tcp service object
EQ-udp 4500 service object
the eq isakmp udp service object
the MILLS_VPN_VLANS object-group network
object-network 10.20.1.0 255.255.255.0
Server-network 255.255.255.0 network-object
user-network 255.255.255.0 network-object
255.255.255.0 network-object-network management
legacy-network 255.255.255.0 network-object
object-group service InterTel5000
the purpose of the service tcp 3998 3999 range
the 6800-6802 range tcp service object
the eq 20001 udp service object
the purpose of the udp 5004 5007 range service
the purpose of the udp 50098 50508 range service
the purpose of the udp 6604 7039 range service
the eq bootpc udp service object
the eq tftp udp service object
the eq 4000 tcp service object
the purpose of the service tcp eq 44000
the purpose of the service tcp eq www
the eq https tcp service object
the purpose of the service tcp eq 5566
the eq 5567 udp service object
the purpose of the udp 6004 6603 range service
the eq 6880 tcp service object
object-group service DM_INLINE_SERVICE_6
ICMP service object
the eq 2001 tcp service object
the purpose of the service tcp eq 2004
the eq 2005 tcp service object
object-group service DM_INLINE_SERVICE_7
ICMP service object
Group object InterTel5000
object-group service DM_INLINE_SERVICE_8
ICMP service object
the eq https tcp service object
EQ-ssh tcp service object
RevProxy tcp service object-group
RevProxy description
port-object eq 5500
XenDesktop tcp service object-group
Xen description
EQ object of port 8080
port-object eq 2514
port-object eq 2598
object-port 27000 eq
port-object eq 7279
port-object eq 8000
port-object eq citrix-ica
public_access_in list any host public-ip extended access allowed object-group DM_INLINE_SERVICE_8
public_access_in list any host public-ip extended access allowed object-group VPN
public_access_in list extended access allowed object-group DM_INLINE_SERVICE_7 any host public-ip-phones
public_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 any public ftp host
public_access_in allowed extended access list tcp any host public-xorcom DM_INLINE_TCP_1 object-group
public_access_in list extended access allowed object-group DM_INLINE_SERVICE_2 any host public-Exchange
public_access_in allowed extended access list tcp all welcome RevProxy-public-group of objects RevProxy
public_access_in list extended access allowed object-group DM_INLINE_SERVICE_3 any host public-remote control-support
public_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any host public-xarios
public_access_in list extended access allowed object-group web server any host public-sharepoint
public_access_in list extended access allowed object-group web server any host public-tportal
public_access_in list extended access allowed object-group DM_INLINE_SERVICE_4 any host public-kaseya
public_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any host public-pptp
public_access_in list extended access permit ip any host public-XenDesktop
private_access_in list extended access permit icmp any one
private_access_in of access allowed any ip an extended list
VPN_Users_SplitTunnelAcl list standard allowed server-network access 255.255.255.0
VPN_Users_SplitTunnelAcl list standard allowed user-network access 255.255.255.0
VPN_Users_SplitTunnelAcl standard access list allow management-network 255.255.255.0
VPN_Users_SplitTunnelAcl standard access list allow 10.20.1.0 255.255.255.0
VPN_Users_SplitTunnelAcl standard access list allow legacy-network 255.255.255.0
private_nat0_outbound list extended access allowed object-group ip MILLS_VPN_VLANS 255.255.255.0 Irvine_LAN
private_nat0_outbound list extended access allowed object-group ip MILLS_VPN_VLANS 10.20.1.96 255.255.255.240
private_nat0_outbound list extended access allowed object-group ip MILLS_VPN_VLANS 10.90.2.0 255.255.255.0
public_1_cryptomap list extended access allowed object-group ip MILLS_VPN_VLANS 255.255.255.0 Irvine_LAN
public_2_cryptomap list extended access allowed object-group ip MILLS_VPN_VLANS 10.90.2.0 255.255.255.0
pager lines 24
Enable logging
list of logging level warnings error events
Monitor logging warnings
logging warnings put in buffered memory
logging trap warnings
exploitation forest asdm warnings
e-mail logging warnings
private private-kaseya host connection
forest-hostdown operating permits
logging of trap auth class alerts
MTU 1500 public
MTU 1500 private
management of MTU 1500
mask 10.20.1.100 - 10.20.1.110 255.255.255.0 IP local pool VPN_Users
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface 101 (public)
private_nat0_outbound of access list NAT 0 (private)
NAT (private) 101 0.0.0.0 0.0.0.0
NAT (management) 101 0.0.0.0 0.0.0.0
static DNS (private, public) public-private-netmask 255.255.255.255 ip phones, ip phones,
static DNS (private, public) private public-ftp-ftp netmask 255.255.255.255
static (private, public) public-private-xorcom netmask 255.255.255.255 xorcom dns
static DNS (private, public) public Exchange private-Exchange netmask 255.255.255.255
RevProxy-public (private, public) public static private-RevProxy netmask 255.255.255.255 dns
static DNS (private, public) public-remote control-support private-remote control-support netmask 255.255.255.255
static (private, public) public-private-xarios netmask 255.255.255.255 xarios dns
static public-sharepoint (private, public) private-sharepoint netmask 255.255.255.255 dns
TPORTAL-public (private, public) public static private-tportal netmask 255.255.255.255 dns
static (private, public) public-private-netmask 255.255.255.255 kaseya kaseya dns
static public-pptp (private, public) private-pptp netmask 255.255.255.255 dns
static public-XenDesktop (private, public) private-XenDesktop netmask 255.255.255.255 dns
Access-group public_access_in in the public interface
Access-group behind closed doors, interface private_access_in
Public route 0.0.0.0 0.0.0.0 cox-gateway 1
Private server network route 255.255.255.0 10.20.1.254 1
Route private user-network 255.255.255.0 10.20.1.254 1
Private networking route 255.255.255.0 10.20.1.254 1
Route private network iscsi 255.255.255.0 10.20.1.254 1
Private heritage network 255.255.255.0 route 10.20.1.254 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Admin-control LDAP attribute-map
Comment by card privileged-level name
LDAP attribute-map allow dialin
name of the msNPAllowDialin IETF-Radius-class card
msNPAllowDialin card-value FALSE NOACCESS
msNPAllowDialin card-value TRUE IPSecUsers
attribute-map LDAP Mills-VPN_Users
name of the msNPAllowDialin IETF-Radius-class card
msNPAllowDialin card-value FALSE NOACCESS
map-value msNPAllowDialin true IPSecUsers
LDAP attribute-map network admins
memberOf IETF Radius-Service-Type card name
map-value memberOf NOACCESS FAKE
map-value memberOf 'Network Admins' 6
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt Mills
host of Mills (private) AAA-server private-pptp
auth-ms01.mills.int NT domain controller
AAA-server Mills_NetAdmin protocol ldap
AAA-server Mills_NetAdmin (private) host private-pptp
Server-port 389
or base LDAP-dn = San Diego, dc = factories, dc = int
or LDAP-group-base dn = San Diego, dc = factories, dc = int
LDAP-scope subtree
name attribute LDAP cn
LDAP-login-password *.
LDAP-connection-dn cn = asa, OU = Service accounts, or = San Diego, dc = factories, dc = int
microsoft server type
LDAP-attribute-map-Mills-VPN_Users
AAA-server NetworkAdmins protocol ldap
AAA-server NetworkAdmins (private) host private-pptp
or base LDAP-dn = San Diego, dc = factories, dc = int
or LDAP-group-base dn = San Diego, dc = factories, dc = int
LDAP-scope subtree
name attribute LDAP cn
LDAP-login-password *.
LDAP-connection-dn cn = asa, OU = Service accounts, or = San Diego, dc = factories, dc = int
microsoft server type
LDAP-attribute-map network-admins
AAA-server ADVPNUsers protocol ldap
AAA-server ADVPNUsers (private) host private-pptp
or base LDAP-dn = San Diego, dc = factories, dc = int
or LDAP-group-base dn = San Diego, dc = factories, dc = int
LDAP-scope subtree
name attribute LDAP cn
LDAP-login-password *.
LDAP-connection-dn cn = asa, OU = Service accounts, or = San Diego, dc = factories, dc = int
microsoft server type
LDAP-attribute-map-Mills-VPN_Users
Console to enable AAA authentication LOCAL ADVPNUsers
Console HTTP authentication of the AAA ADVPNUsers LOCAL
AAA authentication serial console LOCAL ADVPNUsers
Console Telnet AAA authentication LOCAL ADVPNUsers
authentication AAA ssh console LOCAL ADVPNUsers
Enable http server
http 0.0.0.0 0.0.0.0 management
http 0.0.0.0 0.0.0.0 public
http 0.0.0.0 0.0.0.0 private
Community private private-kaseya SNMP-server host * version 2 c
Server SNMP - San Diego location plants
contact SNMP server, help the Mills
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt noproxyarp private
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto public_map 1 match address public_1_cryptomap
card crypto public_map 1 set pfs
card crypto public_map 1 set xx.168.155.98 counterpart
card crypto public_map 1 the value transform-set ESP-3DES-MD5-ESP-AES-128-SHA
public_map card crypto 1 set nat-t-disable
card crypto public_map 1 phase 1-mode of aggressive setting
card crypto public_map 2 match address public_2_cryptomap
card crypto public_map 2 pfs set group5
card crypto public_map 2 peers set xx.181.134.141
card crypto public_map 2 game of transformation-ESP-AES-128-SHA
public_map card crypto 2 set nat-t-disable
public_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
public crypto map public_map interface
crypto ISAKMP enable public
crypto ISAKMP policy 1
preshared authentication
aes encryption
sha hash
Group 5
life 86400
crypto ISAKMP policy 10
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
md5 hash
Group 1
lifetime 28800
Telnet 0.0.0.0 0.0.0.0 private
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 public
SSH 0.0.0.0 0.0.0.0 private
SSH 0.0.0.0 0.0.0.0 management
SSH timeout 5
Console timeout 0
management of 192.168.0.2 - dhcpd addresses 192.168.0.254
!
a basic threat threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
authenticate the NTP
NTP server 216.129.110.22 public source
NTP server 173.244.211.10 public source
NTP server 24.124.0.251 public source prefers
WebVPN
allow the public
enable SVC
internal group NOACCESS strategy
NOACCESS group policy attributes
VPN - concurrent connections 0
VPN-tunnel-Protocol svc
internal IPSecUsers group strategy
attributes of Group Policy IPSecUsers
value of server WINS 10.20.10.1
value of server DNS 10.20.10.1
Protocol-tunnel-VPN IPSec
allow password-storage
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list VPN_Users_SplitTunnelAcl
Mills.int value by default-field
the address value VPN_Users pools
Irvine internal group policy
Group Policy attributes Irvine
Protocol-tunnel-VPN IPSec
username admin password encrypted in Kra9/kXfLDwlSxis
type VPNUsers tunnel-group remote access
tunnel-group VPNUsers General attributes
address pool VPN_Users
authentication-server-group Mills_NetAdmin
Group Policy - by default-IPSecUsers
tunnel-group VPNUsers ipsec-attributes
pre-shared-key *.
tunnel-group xx.189.99.114 type ipsec-l2l
tunnel-group xx.189.99.114 General-attributes
Group Policy - by default-Irvine
XX.189.99.114 group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group xx.205.23.76 type ipsec-l2l
tunnel-group xx.205.23.76 General-attributes
Group Policy - by default-Irvine
XX.205.23.76 group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group xx.168.155.98 type ipsec-l2l
tunnel-group xx.168.155.98 General-attributes
Group Policy - by default-Irvine
XX.168.155.98 group of tunnel ipsec-attributes
pre-shared-key *.
!
Global class-card class
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
World-Policy policy-map
Global category
inspect the dns
inspect esmtp
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the sip
inspect the skinny
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect xdmcp
!
service-policy-international policy global
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:5d5c963680401d150bee94b3c7c85f7a
Maybe my eyes is glazed looking at it for too long. Something seems wrong? Maybe I missed a command that would not appear in the config?
Thanks in advance to those who take a glance.
We see that the UI is sent the echo request but there is no response to echo. This seems to be a routing problem between the ASA and the host you are trying to ping. You can see the range so that the traffic to 10.20.1.0 network is routed to the ASA. If there is no other routing device make sure that the default gateway is correct on the host computer, you're trying to reach.
If you try to ping a windows machine make sure that the windows firewall is disabled or allows ICMP.
--
Please do not forget to rate and choose a response from xorrect
-
Access wifi with WPA encryption Vista giving "access: Local only.
I've read many threads on a similar situation. I am convinced that the symptom has many different causes. Nothing I've read solves the problem for me.
I have toshiba vista laptop and struggled until I've decided to return to the original recovery disk from the manufacturer, reloading everything from scratch. still did not help. The use of WEP encryption works, so I don't know the interface wireless on the laptop works. but it is not acceptable that WEP is such a weak encryption - basically no security. try to use the encryption WPA or WPA2, which does not work for vista. laptop is a few feet from the router, so a lot of signal strength. one other non-Vista computer laptop works well. uninstalled the trial version of mcAfee. updated the drivers and software vista for later. assign an ip address to the laptop, and when it starts up, I see that this address is assigned. Disable all the ipv6. disabled the DHCP broadcast stuff. off the vista firewall. ipconfig/all is shown below, which seems ok to me. never had Norton or symantic is installed. tried to reset the ip stack. Wired ethernet to the router works. just to get the local access only on the wireless with WPA encryption. The router is quite new netgear WNR2000 and also tried a brand new netgear router multiband with identical results.
Sure could use some help here.
Windows IP configuration
Name of the host...: FamilyComputer
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Wireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Atheros AR5005G Wireless Network adapt
Physical address.... : 00-16-E3-F2-DE-BB
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv4 address: 192.168.1.99 (Preferred)
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.1.1.
DNS servers...: 192.168.1.1.
NetBIOS over TCP/IP...: enabledEthernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
Description...: Realtek RTL8139/810 x Family Fast Ethernet NIC
Physical address.... : 00-1B-24-20-AB-E7
DHCP active...: Yes
Autoconfiguration enabled...: YesHello
You said that he can connect with WEP but not WPA.
There is therefore no connection with the router under WPA.
For as far as the OS is concern that WPA doesn't have a general problem in Win XP SP3, Vista or Win 7.
Encryption in many cases problems stem from the problem of drivers.
Quote: "I'm still stuck with a non-working wireless network on my Vista laptop and the place where it is normally used. This means in technical terms.
For example, there's something special about this wireless source?
You can try to check the integrity of Vista using the SFC - http://support.microsoft.com/kb/929833
If I were in that situation, I'll borrow a wireless USB network who knows work and try to make sure that it is not wireless card related problem.
BTW, have you checked the process that there is no residual "junk" left by the safety test.
Download it, run it and take a look at changing it running.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
GRE over IPSec tunnel cannot pass traffic through it
I am trying to configure a GRE over IPSec tunnel between sites, we use the router cisco 7613 SUP720 (IOS: s72033-advipservicesk9_wan - mz.122 - 18.SXF15a.bin) and 3845 router (IOS:c3845 - advsecurityk9 - mz.124 - 25c.bin), we are facing problems when we use the tunnel because traffic is not passing through it. the configuration was working when we were using two routers cisco 3845 (IOS:c3845 - advsecurityk9 - mz.124 - 25c.bin), but for some reason, it doesn't work anymore when I paste the configuration on the new 7613 router.
Head office
crypto ISAKMP policy 10
BA aes
preshared authentication
Group 5
ISAKMP crypto key T3ST001 address 0.0.0.0 0.0.0.0
!
!
Crypto ipsec transform-set IPSec_PLC aes - esp esp-sha-hmac
transport mode
!
map PLC - CUM 10 ipsec-isakmp crypto
defined by peer 167.134.216.89
game of transformation-IPSec_PLC
match address 100
!
!
!
Tunnel1 interface
bandwidth 1984
IP 167.134.216.94 255.255.255.252
Mtu 1476 IP
load-interval 30
source of tunnel Serial0/1/0:0
tunnel destination 167.134.216.89interface Serial0/1/0:0
IP 167.134.216.90 255.255.255.252
card crypto PLC - CUMaccess-list 100 permit gre 167.134.216.90 host 167.134.216.8
Router eigrp 100
network 167.134.216.92 0.0.0.3Directorate-General of the
crypto ISAKMP policy 10
BA aes
preshared authentication
Group 5
ISAKMP crypto key T3ST001 address 0.0.0.0 0.0.0.0
!
!
Crypto ipsec transform-set IPSec_PLC aes - esp esp-sha-hmac
transport mode
!
map PLC - CUM 10 ipsec-isakmp crypto
defined by peer 167.134.216.90
game of transformation-IPSec_PLC
match address 100Tunnel1 interface
bandwidth 1984
IP 167.134.216.93 255.255.255.252
Mtu 1476 IP
load-interval 30
source of tunnel Serial1/0/0:1
tunnel destination 167.134.216.90interface Serial1/0/0:1
bandwidth 1984
IP 167.134.216.89 255.255.255.252
IP access-group 101 in
load-interval 30
no fair queue
card crypto PLC - CUMaccess-list 100 permit gre 167.134.216.89 host 167.134.216.90
ER-7600 #sh crypto isakmp his
conn-id State DST CBC slot
167.134.216.89 167.134.216.90 QM_IDLE 3 0ER-3845 #sh crypto isakmp his
status of DST CBC State conn-id slot
167.134.216.89 167.134.216.90 QM_IDLE 3 0 ACTIVEER-3845 #sh active cryptographic engine connections
Algorithm of address State IP Interface ID encrypt decrypt
3 Serial0/1/0: 167.134.216.90 0 HMAC_SHA + AES_CBC 0 0 value
3001 Serial0/1/0: 167.134.216.90 0 set AES + SHA 0 0
3002 Serial0/1/0: 167.134.216.90 0 set AES + SHA 61 0ER-7600 #sh active cryptographic engine connections
Algorithm of address State IP Interface ID encrypt decrypt
3 Serial1/0/0:1 167.134.216.89 set HMAC_SHA + AES_CBC 0 0
2000 Serial1/0/0:1 167.134.216.89 set HMAC_SHA + 0 66 AES_CBC
2001 Serial1/0/0:1 167.134.216.89 set HMAC_SHA + AES_CBC 0 0I had this error on the er-3845: % CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd package not an IPSEC packet and this one on the IPSEC (epa_des_crypt) UH-7600: decrypted packet has no control of his identity
Please help, it's so frustrating...
Thanks in advance
Oscar
Here is a document from cisco, mentioning clearly for a card encryption on the two physical as tunnel interface well.
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a008009438e.shtml
It may be useful
Manish
Maybe you are looking for
-
Hey I have a few question 2 days ago before I updated my firefox, this site "Animekompi.web.id" showed the picture/thumbnail normally. And yesterday so far I've already updated my firefox twice, when I opened this website, the image did not appear li
-
El capitan sank my already very usable macbook pro 13 "! EACH application is slowed until almost uselessness, takes almost five minutes to wake up to the top/connect to wifi after sleep, a lot of problems with playback of streaming audio and audio it
-
Text formatting will not work on 7.23
Hello. It has been recently updated (about two weeks ago) that completely broke text formatting for me. None of the options work for me. They would look like this under my messages: * bold *. _italics_ ~ bar ~ {code} and I don't even know what to cal
-
I installed Windows XP but I can't access the internet. I checked the IPconfig and it is empty. The indicator light on the adapter is on green. Of course, the drivers are missing but whom? original title: IPConfig and lack of internet access
-
Split 13 x 2: split 13 x 2 hangs at startup
My Split X 2 sometimes locks the blue HP logo during startup. Generally a hard reboot will work with any other issue. A few times, including today, hard reboot does not work and it continues to block on the logo screen. I restarted hard about ten