L50 - A - nVidia GeForce satellite does not properly

Similar Questions

• First cc 2015, 960 SC NVIDIA graphics card does not properly - advice please!

  I have just signed up to Premiere Pro CC 2015.  I also had the 'SuperSuper clocked' new graphics EVGA Gtx 960 map that I've been informed that my makes it would really speed up.  Unfortunately there is no Super current synchronization and makes is very slow. No change.

  I have:

  -Downloaded the latest NVIDIA drivers

  -Ticked all the boxes in the first for the use of the GPU with CUDA, Maximum acceleration few make it,.

  Runs from PC:

  -Windows 7 (64-bit)

  -24 GB of RAM memory installed.

  -INTEL CORE i7, 3.33 GHz

  Maybe Adobe Premiere does not accept the officially this new graphics card?  Any help would be appreciated.

  Thanks, Patrick

  Hi Safohene,

  Patrick Beesley wrote:

  I have just signed up to Premiere Pro CC 2015.  I also had the 'SuperSuper clocked' new graphics EVGA Gtx 960 map that I've been informed that my makes it would really speed up.  Unfortunately there is no Super current synchronization and makes is very slow. No change.

  Effects of rendering previews is a CPU-based process.

  Export the video is also a CPU-based process.

  Therefore, I do not expect you would see improvements in most of the cases, as your GPU is not used for these processes.

  Thank you
  Kevin

• After Windows Update my NVIDIA GeForce 9800GX2 does not use NVIDIA drivers

  Vista Ultimate x 64 with NVIDIA GeForce 9800GX2 graphics card.

  It worked perfectly until one update windows cannot load the new driver for the graphics card; now, it will work only in VGA mode, and the map is shown as an unknown device in Device Manager.

  I tried to manually load the drivers for the card, but Vista some how block installation.

  How can I get my drivers loaded so I can use the graphics on this card.

  Try drivesweep. 3rd party software to remove the drivers.

  in SafeMode (small-scale)
  (1) uninstalled the drivers first.
  (2) run the driver scan, this will clear the registry of nvidia
  (3) remove the folders from nvidia.
  (4) reinstall the drivers (safe mode)

  http://www.Guru3D.com/category/driversweeper/

• NVIDIA gforce9500 gt does not properly after the to...

  Hi I m using vista family basic n my graphics card is nvidia 9500gt it was work propely for months, but when I update the nvidia windows update driver it will restart in an instant the problem is that the computer works normally but the screen shows blue dotted staright lines I have reinstall the driver but nothing won't be going on so please help me...

  Hello

  Remove ALL power and remove and reinsert the card - are not only well adjusted. Be sure to operate fans and
  clean the dust bunnies. Check the range of cables for the video card and monitor.

  Check with support from Nvidia, their drivers live and ask questions in Nvidia forums about known issues
  with this card.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  Hope these helps.

• Satellite L50 - after Win10 touchpad upgrade does not

  Brand-new Satellite L50-C03E laptop pad touch does not work. Upgrade to Windows 10. Tried using all combinations of F5, FN & F5, don't hit to swipe and checking settings and nothing works.

  I guess you can use external USB mouse.
  Connect it to the laptop and uninstall the old touchpad software / driver for Windows 10 system. You should find it in Control Panel → programs and features.

  After the the touchpad driver has been removed, restart the laptop and win 10 updates.

  It would be very interesting to know if this solution allows you to get the touchpad working again.

• Nvidia optimus T440p does not work on Windows 8.1

  Hello

  I recently bought my new laptop (Lenovo T440p) which comes with built-in OPTIMUS Intel coupled by GeForce GT 730 M 1 GB graphics card. I tried to play games; However for some reason any show of game options, that my Intel HD card is used as a default graphics card. This suggests that the OPTIMUS technology does not properly switch the graphics card. System running on windows 8.1 Pro 64-bit. How to activate the switching Optimus?

  THX

  Majlou

  Try the latest drivers available on the nvidia site. They work very well on T440s + gt730m and W8.1, so there should be no reason not to work on your t440p. For some reason, put the Lenovo system update does not detect them.

  You can also check in the nvidia Control Panel, that optimus is not set to "only integrated graphics. They are 3 parameters, you can choose amongst (gpu integrated, discreet, auto).

  It is also an option in the nvidia Control Panel to display an icon in the taskbar with the current gpu being used, could be useful. Do not remember exactly where the option is good.

• NVIDIA Control Panel does not open

  I just reinstalled Windows 7 on my PC and the NVIDIA Control Panel does not open when I click on the link in the windows control panel.  I installed it by using Windows Update.

  Updates Windows reports that it installed properly but the Panel itself will be open from nt.

  Should I remove it and reinstall again?

  Version is Ver: 191.07

  Hi AdelaideJohn67,
   
  I suggest to uninstall existing NVIDIA Control Panel and restart the computer. Visit the NVIDIA Web site, download and install the drivers manually.

  http://www.nvidia.com/download/find.aspx?lang=en-us
  After installing the drivers, restart the computer and just do a right click on your desktop and watch if the NVIDIA Control Panel whether or not written.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.

• Toshiba 47L7453DG - CEC does not properly using exernal amplifier

  I bought Toshiba 47L 7453 a few days ago.

  It is connected to the amplifier Onkyo TX-NR535 but CEC does not properly. Volume control works fine but On / Off or stanby does not at all.

  My previous TV Toshiba 42XV635DG was communicated by the CEC with the Onkyo even without any problem.

  The wire connection is HDMI 1.4 certified.
  Maybe the problem is with the firmware of the TV.

  Maybe someone had the same problem.

  Any suggestion?

  Thank you

  Hello

  From my point of few TV and amplifier are connected some CEC (Volume control) functions that work. I think you should check the auto power settings and HDMI CEC standby control system.

  Manual, you will find some important notes:
  http://www.Toshiba-OM.NET/LCD/PDF/English/L7453-424755-English.PDF

  _Page: 11_
  + You can control the basic functions of audio/video devices connected with s TV remote if you connect an HDMI-CEC compatible AV amplifier or playback device. +
  + If several devices are connected, the HDMI CEC control function may not work correctly. +

  _Page: 86 - 87_
  + When the point to activate the HDMI CEC control in the menu of HDMI CEC control configuration is defined on.
  + On, also allocated to individual features will be activated. +
  + When the connected equipment work, HDMI CEC control automatically detects the TV input selection. If the TV is in standby mode, it will be automatically reactivated. +
  + If the TV is off (standby), television will send a message turns off (standby) all devices HDMI CEC control connected to the TV. +

• EQUIUM A60: graphic ATI does not properly

  I HAVE AN EQUIUM A60 1 YEAR MESSAGE SUDDENLY CRASH SAID: ATI GRAPHICS CARD DOES NOT PROPERLY.
  CAN'T FIND THE DRIVERS UPDATED ON ATI OR MICROSOFT HELP PLEASE?

  Hello

  Can you tell me when this message appears?
  First of all, you can try to update the graphics driver from Toshiba. It is a first step that you can try.
  Check this page for the driver download.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Good bye

• Error message: Shockwave, Flash Player does not properly during playback Slotomania

  Original title: shockwave flash player

  Hi I have problems with some games. Especially slotomania. When I enter the RM of slotomania that flashing message saying that Flash shockwave Player does not properly can give to interrupt or stop options taken but its gone too fast for me to do something. Then the really slow game. Can you help me?

  Hello Marilyn,.

  Thanks for posting your query in the Microsoft Community Forum.

  According the information, you are facing problems to play games online as Slotomania due to the Adobe Shockwave, Flash Player error messages.

  It would be useful that you can answer these questions to help you further.

  1. are you facing problems that when you play online game Slotomania?

  2. using Internet Explorer or another web browser?

  3. what version of the Windows operating system is installed on your computer?

  4. have you made a recent software or hardware changes to the system?

  If you use Internet Explorer, you can see the article and check if it helps to solve the problem.

  The problems of games online using Internet Explorer

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• fan does not properly

  Does not properly on the laptop

  Sometimes it is just dust, animal hair etc. blocking the fan. Take a can of compressed air and blow all the ports/vents/opening very carefully to see if any change.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• Graphic drive does not properly.

  Graphics driver does not properly.  Screen will Dim and must restart to resume use.  Occurring more frequently now.  Y at - it a fix for this problem?

  Problem does not occur in safe mode.  Failure seems to occur on any key or the video style.

  Any material support is the manufacturer of the hardware regardless of the operating system that you choose to use.  As it is unlikely that you have a Microsoft video/graphics card - one you have and have you downloaded and installed the latest drivers/software they provide for your particular device?

• COQ2014: COQ2014 AMD/ATI does not properly

  2 messages warn me for "AMD/ATI does not properly" and "search solution AMD Display adapt-ATI Radeon Graphics Cards.  Search for updates, solutions with nothing appear.  I don't know what that precisely uninstall nor where the new material.

  Thank you!

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and uninstall the graphics driver AMD/ATI to address current from the control panel > programs and features.

  After you have uninstalled the current graphics driver, please try and install the following driver and check:

  Suite software Catalyst:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+32

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP