LabVIEW 2009 SP1 - incorrect icon in connector component palette


This was actually recorded under CAR # 116251 a long time ago. That being said, I can confirm that R & D is aware, but I feel that it is pretty low on the priority list...

Tags: NI Software

Similar Questions

  • LabVIEW 2009 SP1 crashes when moving large selection with the arrow key

    If I select a lot (10 or 15) diagram components and try to move some distance with the arrow button, I'm often a program crash.  Because a reduced number of components seems to hang after a longer distance traveled, it looks like some sort of buffer overflow error.  I don't see this problem when you use the mouse to move selections.

    I checked to make sure I have the latest version of the video driver for my NVIDIA Quatro FX570.  I also tried to work with no hardware acceleration and no handset, written.  What happens on Windows XP SP3 with all current updates.

    It became so bad that I have to do a save as every fifteen minutes to avoid losing data.

    Why not use my mouse for all movements?  Because it is not as specific and not so easy to limit to only one dimension of the movement.   My hand is not as stable as it once was.

    I'm hoping someone will have a suggestion that will clear up this problem.

    As I have indicated, I had the same problem with 8.5 and just DID a new install of Labview 2009.

    Since it is possible that my three monitors configuration, which of course requires more memory video, may be at the origin of the problem, I am satisfied with workaround by dragging the objects closer to their final destination and then using the arrow keys.

    Three monitors are ideal for the front, block and help/Internet/probe damaged.  When I got to work in the field with a single monitor, I felt severely handicapped.

    You can consider the issue closed.

    Thank you for trying to reproduce the failure.

  • LabVIEW 2009 SP1 image ROI identification number?

    In BT 8.5 (Vision), several Kings had displayed beside them identification numbers:

    Apparently not so much more in 2009 SP1:

    The only difference between the two screws is that I used a classic image object and I am now using the modern version; and the image tool window is replaced by the image associated with the picture tool palette. There is no property of the image I can find to activate the return on investment 'Legends' or not.

    How the user is supposed to know what return on investment is that?

    Oops...: indeed. I checked my LV 8.5 code (actually written in BT 6 or whenever the first control of the Image has been released) and I overlay numbers KING myself right here!

    Given that I had used at the same time of overlay to get return on investment numbers, I've just reinvented the wheel... twice.

    I still think it would make sense to access this feature by default in the Vision Toolkit.

    X.

  • "Decimal string to Number.vi" bug in LabVIEW 2009 SP1

    The "decimal string to Number.vi' seems to be the conversion of the input data in the type int32 internally even when the input tape in vi data is expanded floating point (no points of constraint).  This is causing me grief.  See attached vi

    This bug is still present in LabVIEW 2010?

    Thank you

    Richard Ballantyne

    There is no bug. You use the wrong function (see Help) If you want a floating point output. Use Fract/Exp string to a number.

  • How to remove the scrollbars Panel sub with LabVIEW 2009 SP1?

    I did a search and found this thread on the subject: http://forums.ni.com/t5/LabVIEW/subpanel-scollbars-in-labview-8-0/m-p/284503/highlight/false#M149983

    I double checked that the horizontal and vertical scroll bars have not been successful in the appearance of window customize and they were not retained as shown in the image below.  You see scroll bars villain in the façade of the image at the bottom.  Of couse, since the code / sw cannot be shown, it has been repainted but you can still see the scroll bars along the frame of the side panel.

    Custom window appearance settings:

    Scroll bars appear at the bottom & right panel sub frame

    Found the solution...

    Right-click the scroll bars and select horizontal scroll bar and select always off.

    Repeat the procedure for the vertical scroll bar.

  • LabVIEW 2009 sp1 not having replied to the questionnaire / accident

    Hello

    I seem to have developed a problem with LabVIEW, in which case it freezes at a random point during execution. It is not a matter of a VI gel, rather LabVIEW itself stops working and has closed by the Task Manager. What I have running at the moment is a VI host that sends and receives data over a TCP connection to a target in real time on a PXI system. The real-time application continues to operate after the crash. The host system is also running control of 3D image showing some basic graphics. The entire system is controlled at a higher level by a program crushed in c# via a TCP connection, but can work alone. When you run stand alone the problem will not occur.

    The communication between LabVIEW and c# works very well, but at a random time during the operation, LabVIEW freezes while c# continues to work. This does not appear to correspond to a particular action by the c# program. I guess my question is, is there any likely culprit by which LabVIEW can be crushed by an exernal program where the only communication is via TCP, which seems to work very well and where it does not seem to be excessive memory or CPU usage?

    See you soon.

    Fixed a problem with an update of the graphics card driver.

  • LabVIEW 2009 linux crashes when editing a control, or a constant of resources VISA

    Linux crashes when I click on a constant resources VISA (block diagram) or control (front).  This happens on LabVIEW 2009 SP1 32-bit for Linux on CentOS (similar to RedHat 6.3) 6.3.  I have updated drivers VISA 5.1.2 and that did not help.  Thanks in advance for any ideas of five Linux guys out there.

    Hello Jason,

    My problem has been resolved with LabVIEW 2012.  To answer your question, LabVIEW would crash only trying to select another device in the list.  Thanks for your help.

    Kind regards

    Marvin

  • Can I build an application with Labview 2009 for Windows 7?

    Hello

    I use Labview 2009 SP1 and the application builder 2009 SP1. If I install the app on win7 this message:

    Engine run LabVIEW depends on failure to upgrade (...) version 9.0.301, language {} code that is not in the distribution.

    Is it a problem with Windows 7, having two records of installation of 32 bit (C:\Program Files (x 86)) and 64 bit (C:\Program Files)?

    I had an application built on a XP machine and installed on a Windows 7 computer that was looking for the files in C:\Program Files when they were actually installed in C:\Program Files (x 86) - because it was 32-bit application.  After the installation I had to move the files to 1 place to another to make it work.

  • Is there an Excel to TDM plugin for LabVIEW 2009

    I downloaded the Excel to TDM plugin and could not run. Dialog error usiReg said "this configuration file was created with a new version of the ICU and can not be used with the software you have installed." I installed LabVIEW 2009 SP1 and the .net version is 4.0. Y at - it another version of the 9

    the plugin I can use? Is there something else I can do, or am I just out of luck, until I update?

    Hello

    the functionality to open Excel files has been added to the ICU starting with version 1.8. However, the ICU in the manner described above upgrade you will register to use ExcelTDM and make it available through the _openWithRoot.vi in LabVIEW 2009. Simply install or DIAdem 2010 NI LabVIEW 2010 as a demo version.

    Please see also the comments from readers on the page of ExcelTDM use, a client has requested the use of using Excel in older versions of DIAdem:

    ExcelTDM use

    Greetings,

    Uwe

  • convert elements using the DAQCard-6024E card to USB-6221using LabVIEW 2009

    I just got an old project, the VI has been primarily designed using the DAQCard-6024E map. Since we would be upgrading the equipment and the DAQCard-6024E serves not long. However, they want to keep the similar façade. I am trying to convert the drop-down menu that I can use with USB-6221 with Windows 7, but I don't know how. Can anyone help?

    Windows 7, NI USB-6221, LabVIEW 2009 sp1

    Hi smoothenigne007,

    After watching your upgrade.  All your writing VI should use the same task.  There is no need to close this task until the end of the program.  In addition, you can remove all the time because they do not allow the task close a loop.  I did a performance highlighted with your code and you can see that the first task was not allowed at the time wherever the data reached the second task.  When you try to create the second task, the error is generated.  Because you do not give me multiple writes to the same port there is no need to open and close the task each time.  Here is a link that will explain a little more about the DAQmx driver works.

    Getting Started With DAQ

    Kind regards

  • [Bug]? LabVIEW 2010 SP1 - Device Drivers Incorrect link

    Hello

    This page link to download LabVIEW 2010 SP1 Device Drivers Feb 2011 on this page points actually to November 2010.

    See you soon

    -JG


  • LabVIEW 2014 SP1, hardware and real-time PXI

    I'm doing my third LabVIEW Wipe/reinstall in as many days, completely frustrated (and after several calls an hour with the support of NEITHER).  Here's the situation:

    I wrote a fairly large (1000 VI) project of Acquisition/control of our graduate students data used for behavioral experiment on sound localization.  It was developed in 2012 LabVIEW with the module running on a PC/PXI system real time.  It worked very well and was brought successfully under LabVIEW 2014 (with upgrades comparable to the software of the PXI.

    About 18 months ago the students began to write their theses, and at one point stopped gathering data.  Also, at some point, I upgraded the software on this system to LabVIEW 2014 SP1, but I am not sure that I never tested my software with this new system.

    This week, I pulled up the system to use MAX to open some test on the PXI multifunction and DIO card panels to control manually one of the stimuli.  I discovered that MAX could not communicate with the advice on the PXI system - he attributes them as devices VISA, indicating each Board with an icon with a red X means that he could not communicate with the IP that I had assigned to PXI.  Yet, MAX (a) could "discover" this PXI, (b) MAX can 'see' its IP address, and (c) Windows could not only Ping the IP, but could FTP on the drive of the PXI and I could move files back and forth.

    I did two sequences complete "Wipe/reinstall" using LabVIEW 2014 SP1, all giving the same result.  I know it has worked in the past, including when I installed LabVIEW 2014 (without SP1), something I repeat myself now with my third installation.  I discussed with OR (thin?) possibility that there is a "hidden defect" in the Distribution of the SP1, one that is visible to LabVIEW RT users using PXI hardware and go unnoticed because (a) install a few sites of LabVIEW versions SP1, (b) a minority use the RT Modules and (c) PXI is "old material".

    If anyone has such a system or saw a similar problem, please answer.  I'll do a follow-up post if I managed to 'fix' my system by this last reinstallation "a solution of worked before."

    Bob Schor

    Well, the answer is that, in my system, LabVIEW 2014 SP1 with LabVIEW Real-time connected to a PXI system does not appear to connect to boards plugged into the chassis.  Returning to LabVIEW 2014 (fall release), installed in exactly in the same way that the three failed attempts of LabVIEW 2014 SP1, works immediately.  Engineers OR will try to duplicate/verify/possibly patch? in this issue.

    Bob Schor

  • LabView 2009 Service Pack 1 does this cause a problem with the MAthScripts for lo

    All,

    I just installed Service Pack 1 for Labview 2009.  All of my code that loops in my MathScripts now lets my MathScripts does not compile.  Have a clue what I do?

    Thank you

    Rich

    Windows XP (32-bit)

    LabView 2009 uninstalled, reinstalled after you have removed all files related to 2009.  SP1 installed, then applied for LabView and MathScript.

  • LV 2009 SP1 Build error OR

    While trying to do a build on LV 2009 SP1, I get this error:

    The build failed.

    An error occurred during the recording of the following file: Sample.VI

    Details:

    Visit ni.com/ask support request page to learn more about the resolution of this problem. Use them following as a reference: 1 error this is produced to AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

    Possible reasons: LabVIEW: an input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. = OR-488: command requires GPIB controller charge controller.

    Note that I do not use any GPIB. Also when I build the project NAV 2009 (without SP1) on another computer, I get no error. Any ideas?

    An Application (EXE). Now what I've done is removed the previous generation in the project framework > My Computer > specifications build and created a new Build > Application (EXE). And he built successfully!

    Now, of course was was wrong the first time... but it works now. Thank you!

  • Question of LV 2009 SP1 EXE Builder

    Hi guys:

    I found the exe file, built from LV 2009 SP1 can be easily extracted with WinRAR, I can see all the main or sub - VI, is this a bug? or a risk of setting? I have not found the same problem in LV 8.6,

    Thank you

    I don't think that you should think about a lot of it. One of the first discussions on this subject is here http://forums.ni.com/t5/LabVIEW/decompiling-2009-executable/td-p/991662. It is true that they will be able to extract the screws, but they will not be able to see, any more than you show in your program.

Maybe you are looking for

  • Windows Media Player crashes when you open a file

    The player program freezes when I try to open a video file from Windows Media Player. However, when opening a video file (right click > open with > Windows Media Player) the video plays normally. A month ago, has worked these two methods. Windows XP

  • SEVERAL IF

    Hello, someone can help me. How could you put a number of conditions to multiple values in a single Modbus Word Giving that it is executed when you press a button. Example of Modbus connections: Modbus1.48516 = If(Pb1,50,Modbus1.48516) this phrase is

  • SQL exprss

    I am trying to download this program and I'm coming to the point where it says if the download does not start within 30 seconds, click here.  He never starts and I click there and it brings me back to try again.  I've been around this circle several

  • not available on captivate text effects 9

    Hello. can someone explain to me why my 9 64 captivate version doesn't have the ability to text effects? I watch a tutorial on Lynda. the author shows how to use the effects on a button, but on mine its lack! It; s supposed to be next to the selectio

  • level of service required to save a form at the library

    Esign services (echosign), the trial version does not allow to save a form to the library, to be used over and over again. Should what service level I buy to get this functionality? Individual is sufficient? Thank you!