LabVIEW 2015 do not install it, autorun.exe "met a bad argument.
Hello
I recently got a new laptop and tried to install labVIEW on it. He started to install, but the system loses power in the middle and close. I deleted the National Instruments folder in Program Files (x 86) and retried, but when I run autorun.exe said he "met a bad argument" with a red 'X'. So I tried to launch setup.exe, and he starts, but bypasses LabVIEW and continues for the module in real time, where it says "LabVIEW 2015 must be installed before you install the real time module. Any help would be appreciated.
Thank you
Tags: NI Software
Similar Questions
-
LabVIEW 2010 will not install on Win XP SP3
I have made several attempts to install LabVIEW 2010 on Win XP SP3. I already have LabVIEW 2009 installed and working.
On each attempt, I accept the default installation options and do not put in a serial number. The first attempt got stuck at 2% full and has not changed for 30 minutes. No error message. I canceled the installation and tried to install it again from setup.exe.
The next two attempts to stall at 0% blinking forever. The 4th attempt made in 18% entered at a standstill for more than 30 minutes. The next two attempts is stagnating at 0% repeating and not cancel. I had to end it with the Task Manager.
Why it not install LabVIEW 2010 without stalling until 30 minutes? Why it not spit an error instead of just stalling? How can I know why he moved? How should I do?
I finally got to LabVIEW 2010 to install.
I didn't have a corrupted download. I didn't disable my antivirus. I didn't have a lot of processes running. I turned off my computer last night and I tried the setup.exe again this morning first thing. Maybe running LabVIEW 2009 yesterday before installation left something that the installation did not like. Who knows?
How is the installation of LabVIEW 2010 would just stall for long periods (more than 30 minutes, maybe forever) without any error message or progress?
LabVIEW has a Setup log that I could look into these situations to see where the installation is suspended up to and perhaps why?
-
Hi people,
We have a device driver (* .inf) to our application that is added to our distribution , we create in CVI. In the past we did copy the *.inf in the
/dossier inf directly (using the distribution Installer "files"-Tab ""). Recently, we have followed the guidelines described in "Using LabWindows/CVI to install your device .inf files.
So we have now chosen a significant subdirectory of our application as the destination folder for the file *.inf instead of directly copy in the system directory.
Everything works well (besides the fact that our driver has no signature and needs user interaction), while using Windows XP.
DIFxApp (run MsiProcessDrivers) recognizes the *.inf file and installs the device driver.
After completing successfully the setup.exe, the specified *.inf has been duplicated as oem*.inf/pnf under
/INF. But under Windows 7 the *.inf is not installed. I ran "setup.exe/l * v" for the information of the installation log file.
And I found this article:
MSI (s) (8:9 C) [13:56:41:043]: jumping action: MsiProcessDrivers (the condition is false)
Of course the step of installing the drivers is ignored.Choose the
/INF in the folder target to the *.inf (which does not work on Windows XP) everything works fine. Does anyone know why MsiProcessDrives is ignored in Windows 7? It is always ignored or I do something wrong?
Help is appreciated!
Thank you!
Philipp
PS. : The device driver *.inf was written for several OS (XP, Vista, Win7) target according to Microsoft guidelines for this. So it of a universal *.inf file and can be used in each operating system from XP to Win7.
Good,
I solved the problem myself.
The problem is related to the DIFxApp.dll , which is available as 32-bit and 64-bit version.
In my case, I created the distribution as the 32-bit version. That's why 32-Bit DIFxApp.dll is merged into the MSI file that is not compatible with Windows 7 (64-bit).
This is why NOR added to this CustomAction Condition (NOT VersionNT64) for MsiProcessDrivers, which is perfectly adapted to the species but of by not having is not the *.inf file
installed in Win7. I guess the distribution building like Release64 it will use the 64-bit Version of DIFxApp.dll. I'm not able to verify that (still works on XP).
But then it will probably crash on XP.
But anyway. We have a distribution for the two BONES.
Quick & dirty solution I figured out:
-Edit-> files distribution: Add the *.inf file to C:\window\inf
-Manually add VersionNt64 condition in the resulting MSI file under component ->
(you can use the ORCA editor for this) So now, in the case of XP, the *.inf file gets installed by DIFxApp.dll.
Windows 7 using the *.inf is copied directly in the windows/inf folder and installs automatically the first time that the device is connected.
I guess you can merge DIFxApp.dll (32 bit) and DIFxApp.dll (64-bit) to the MSI and manage things together, create conditions. But it is not quickly implemented. At least for me is not...
Regards Philipp
-
Installation of 12 elements PShop DVD does not start, no autorun.exe
New installation of Photoshop elements 12 DVD, will not start. It IS in a DVD player, and Win Explorer shows no Autorun.exe, as suggested in the troubleshooting information. What should do?
You can download a trial version and activate it with your serial number http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements
-
Adobe Photoshop CC 2015 will not install and error
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DW003, DW071 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 3 error(s) ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} ----------- ERROR: DW071: ERROR: DW003: Third party payload installer vcredist_x64.exe failed with exit code: -2147024546 ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\Elixi\AppData\Local\Temp\{53553352-1842-4834-B532-A0A25D2C3598}\Photoshop_16_LS20_win64\Adobe CC 2015\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com
PC brand new, never a product adobe inside short life of 15 minutes, same problem.
Hi Sugarfiend,
Please reinstall of the Package Microsoft Visual C++ 2012 (x 64) using this link: Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center
You can troubleshoot using this link: errors 'Exit Code 6' and ' exit 7 "Code install Adobe CS6, CS5.5, CS5, Premiere Elements and Photoshop Elements .
We invite you to update this discussion in case you need more help.
Thank you.
-
Photoshop CC 2015 is not installing in Windows 10
I have a new laptop (Toshiba A8, 8 GB, 1 TB harddrive) running Windows 10. I've installed all the updates and finally try to install Adobe Photoshop. I downloaded and installed the installer of creative cloud. Of this show, I tried to install Photoshop and Dreamweaver. I get the same error on every installation.
-------------------------------------------------------------------------------------
Exit code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DW003, DW071...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 3 (s)
-Payload: Package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}.
ERROR: DW071:
ERROR: DW003: third payload Installer vcredist_x64.exe failed with exit code:-2147024546
ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\cscot\AppData\Local\Temp\{51E4EA88-7B00-4EB4-89BE-8FB4EB621DA2}\Photoshop_16_LS 20_win64\Adobe CC 2015\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com
-------------------------------------------------------------------------------------
I went to Microsoft website and download (and install) vcredit_x64, exe with no problems at all. However, I still continue to have this problem.
Can someone explain to me what is happening?
Please see the links below.
- Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CC, CS6, CS5.5
- Error "exit 6" or "exit 7" | "» Install log | Read, write, file system errors. CS5, CS5.5
Hope this will help you.
Kind regards
Hervé Khare
-
Adobe Photoshop CC 2015 do not install?
Hi, I tried to install Adobe Photoshop CC test using CC on Windows 8 PC for about a week now, and I get the same report error every time :/ I tried to run my PC in Safe Mode, restart my PC, allowing Admin Adobe access my firewall and it has not changed a thing. Here is the error report that I receive after each attempt:-
Exit code: 34 please see specific errors below for troubleshooting.
For example, the ERROR:
-------------------------------------- Summary --------------------------------------
-fatal error 1, 0 FATAL error: payload "Microsoft Visual C++ 2008 Redistributable Package (x 64) 9.0.0.21 {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9}". "
information not found in Media_db.
----------------------------------------------------------------------------------------- ---
Thanks in advnace
Go to C: > Program Files (x 86) > common files > Adobe.
Open Adobe folder and rename under mentioned folders.
(1) adobe PCD - Adobe PCD centenarians.
(2) hats - caps-old.
3-backup - backup-old.
Then try to install Photoshop CC 2015 and check.
Let me know if it helps.
Thank you
Varun
-
Photoshop CC 2015 will not install on windows 8. It gets stuck at 51%.
Hello
I tried to install Photoshop for about a week now.
All the time I try to install it, it gets stuck at 51%. Sometimes it will say waiting instead, in which he remains waiting for several hours.
I have yet to get an error message or anything like that. I've deleted and reinstalled / used the cleaner program. I'm looking for help since I need it for a class I'm taking.
If anyone has any ideas, please let me know.
Hello
You can use the software for 2015 CC version direct download link using the link below.
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
It will download the 7z file, you can exactly the file using the 7z Extractor
http://www.7-zip.org/download.html
Then, run the Setup file.
It will be useful.
~ Mohit
-
I tried to install it at work
At home
but no luck
Hello
Please see the below help document to resolve the error message:
Download error, installation or update of Cloud Creative applications
Kind regards
Sheena
-
Windows connects successfully to the LEGO EV3 via USB or Bluetooth.
However, the Terminal LEGO of LabVIEW 2015 do not recognize.
I installed the software at retail EV3 for check and it * is * connect to the EV3.
I'm trying to fix the "LEGO Mindstorms NXT x 64" driver, but it will not uninstall even if I uninstall everything of LabVIEW, including the module (input administrator rights when prompted.)
I've been struggling with this days, and I need to connect my EV3 to teach my students LabVIEW.
Any help is greatly appreciated! Thank you in advance.
-Associate Professor Matthew,
#Date: Thu, January 21, 2016 17:21:58
#OSName: Windows 7 Enterprise Service Pack 1
#OSVers: 6.1
#OSBuild: 7601
#AppName: LabVIEW
#Version: 15.0 32 bits
#AppKind: FDS
21/01/2016 5:27:54.774 PM
Coolish 0x00BA6193:
c:\nimble\penguin\labview\components\mgcore\trunk\15.0\source\ThEvent.cpp(267): coolish 0x00BA6193:
Minidump ID: 789e6f18-0e9e-4b10-8b46-c0dd7448d8d4
$Id: //labview/components/mgcore/trunk/15.0/source/ThEvent.cpp#1 $We found it!
Our IT Department has been able to dig up in the driver package and finally managed to uninstall.
Something has been damaged and the pilot wouldn't uninstall correctly.
This fixed the problem beautifully.
-Matthew
-
Compilation of Xilinx not installed labview 2015 FPGA tools
Hello
I just installed Labview 2015 + FPGA Module on my computer with an older version of Labview 8.6.
When I compile a labview FPGA project 2015 I got this error message "year error occurred while communicating with the server compilation" and warning "tools of Compilation of Xilinx not installed."
I can assure you that my server of 2015 lunch perfectly and I installed everything correctly. I assure that it is a conflict between labview 8.6 and 2015 therefore uninstalled the older one.
The problem is my build configuration is set to Xilinx 10.1 (which should be 14.7) and there is no way to change this.
After looking around I found that Labview looking for best compilation tools then maybe this is not the problem
Is there something I missed?
Kind regards
Hello
I found the source of the problem. The FPGA, I used was based on a FPGA Virtex II matrix that is not compatible with this version of the build tools.
Thanks for helping me!
-
It is in these exact words and it's annoying me like crazy can help pleae somone
Hello
Thank you for joining Microsoft Community!
According to the description, it looks like you get the autorun.exe when installing a program on a disk.
However, we need more information to help you better.
Please help me answer this question.
1. is the particular problem with a particular program?
2. is the specific issue when installing a program on a particular CD?
3. what program are you trying to install?
4. What antivirus do you use?
The probable cause for this error 'not a 32-bit application valid' can have several causes:
I have listed some of them below.
The file is corrupted, bad or missing.
a. If the hard drive is damaged or badly it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
b. If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.
File is not designed for your version of Windows:
a. If you try to run a program that is not designed for your version of Windows, you can get this error.
b. Although numerous older programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
c. If the program is an MS-DOS program more former start program or Windows, you get this error.
d. If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.File is a virus, worm or other malicious program file.
a. this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
(b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program, start the computer in
Safe mode will ensure that nothing is running in the background that could cause this problem.
Hardware incompatibility.a. If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
b. download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)
Provide us with more information on the issue to provide a better solution.
-
Autorun.exe DVD opens with main menu.html. then when I click 1. HTML which is ment to start (from the main menu.html) only to open a white page only and plays not the file using src = flvplayer.swf player flash video. (it works on all other browsers) fine. Installed the flash plugin but still does not not in Fire fox. But when I navigate to the root of the cd and click 1. HTML it opens and plays very well, but do does not form the main menu.html. any help would be grat
Thank you
In your main.html:
- What is the URL in the address bar?
- What is the URL of the link?
-
LabVIEW 2015 "not responding" on the open project
I worked on two projects in LabVIEW 2015 for awhile.
Today I wanted to install an upgrade to SP1 2015 LabVIEW. This included a patch for 2015 SP1 f1.
After installation and reboot, I opened one of my projects again. LabVIEW froze with "do not answer" in the title.
After several minutes, I noticed that the Project Explorer had indeed appeared, but when I do something (try opening a .vi) it freezes and crashes again.
I tried to open the other project, and it works fine.
I have the same exact files on a laptop, that I haven't had not upgraded to SP1 f1, and everything works fine there.
I have troubleshooted for a little while, but decided to uninstall SP1 and reinstall 2015.
After doing this, I still have the same problem with the number 1 of the project.
I will attach the .lvproj here, in case someone is a magician and can say something to him.
LabVIEW hangs on the message "opening Hawk.lvproj.
Any advice or help is welcome! Thank you!
Concerning
Oksavik
As I mentioned the Project Explorer seemed finally after about 10 minutes of "not responding".
I clicked 'save everything' and left. Upon return, this is sensitive yet and since then: no problem.
I don't know what caused it, but 'save everything' seems to have solved any problem LV had with my project folder.
Maybe this will help someone else in the future.
-
Update "Compilation of Xilinx tools are not installed" thread for 2015
I have Labview 2015, I need compile a vi for a Compact 9081 RIO fpga. I get the error "the Compilation of Xilinx tools are not installed. Install them using the support or download from ni.com installation. »
OK, pretty simple. What download where? Is there a link?
These Xilinx tools do not resolve the problem, I discovered only after you download all 9 gigabytes:
http://www.NI.com/download/LabVIEW-FPGA-Module-2014/4845/en/
http://www.NI.com/download/LabVIEW-FPGA-Module-2015/5492/en/
Bonus question: where are the instructions that specify which download links to click on what material?
This KB should list on what compilation of tools you need for your specific target.
http://digital.NI.com/public.nsf/allkb/7CF3DD1ABBE6AE5886257EFB0006E303
It can be a little confusing at first, but you need the Xilinx 14.7 for 2015 LabVIEW tools, that you can download from the following link. It seems that you have found the correct version of Xilinx, but it was for 2015 of LabVIEW which is what I assume is the problem.
http://www.NI.com/download/LabVIEW-FPGA-Module-2015/5494/en/
You can also try the cloud of compilation to ni.com/trycompilecloud
Maybe you are looking for
-
Satellite A200-22I - DHCP and SENSE of the problems when you start Windows Vista
When I started my laptop yesterday, I noticed it was going quite slowly, more there was a message saying that windows could not connect to a specified service. As a result my firewall was off tour and I can t connect to the internet. I tried to turn
-
How to upgrade second generation iPad in 5.1.1 to 8
I went to the Apple store and restored my second generation iPad to its original state. I want to update the iOS to 8 or even 9 if possible. How could I do and any advice on that would be better? Do not see it in the app store. Thank you. Barb
-
Error by running Setup.exe in the installation of MS - SQL 2008
Hello I need to install MS SQL2008 but I am unable to run setup.exe in my system. The error was the installation of the .NET framework 3.5 service pack 1 has failed, and SQL Server 2008 requires .NET framework3.5SP1 should be installed. But I install
-
Laptop has a heavy program that runs in the background constantly which makes the device unusable (I think it must be some kind of virus ' cos nothing appears in the Manager of tasks or processes) and I want to reformat the hard drive and reinstall X
-
Issue weird policies Windows w/Quickbooks
It started all of a sudden. The use of Quickbooks 2009 if I find, preview or print anything that has a sign "$" I see rather a ' Z$ '. I copied my data file to another PC and it is fine. I uninstalled Qbooks and remove any substance left on the drive