LabVIEW Developer or test engineer

Similar Questions

• "VI a error 1002288.The full version of LabVIEW Development is necessary to correct the errors."

  Hello

  I had created an executable in LabVIEW 8.6 on a PC windows XP 32-bit. The application uses some screws of Vision. The executable is running in most of the PC except one. the PC is a windows 7 64 bit. I first got the error "Labview support 3 error code: could not load front". "" I fixed this by changing the settings of the source file in the application builder. Now I get the error message "VI a error 1002288.The full version of LabVIEW Development is necessary to correct the errors"and the exe displays a run button broken.»

  But if I build the exe in the same PC I get no error and it works very well. Moreover, I tested this exe in another PC with the same configuration, it works. I tried to reinstall labview in the PC, the problem persists.

  Hi Nitrox,

  There is no official adapter for LabVIEW 8.6 in Windows 7. See link below.

  www.ni.com/LabVIEW/OS-support/

  Upgrade to SP1 LV2009 should solve your problem. We had this problem with another client and update SP1 LV2009 solved his problem and should solve your problem too. If you have a problem after the update let me know.

  Kind regards

  Christophe P

  Technical sales engineer

  National Instruments

• Basis of LabVIEW Development with Compact RIO device software

  Hello.  Currently, I have the LabVIEW Base development software package and have been using it with DAQ Compact devices for the acquisition of basic data.  I would now like to start integrating controls in my system, changing to RIO Compact for deterministic real-time features.  My question is that I would be able to build applications for the Compact RIO system using only the basis of LabVIEW Development package without updating immediately?  Maybe some features are not available for me, but could at least get a good start like that?

  A CompactRIO embedded time real operating system (RTOS) called VxWorks you need to target the deployment of LabVIEW code to the device. Classic LabVIEW screws you will have been written so far are built to target general purpose operating systems (GPO) such as windows.

  To create screws that are deployable to STSOp, you will need the real-time Module that is not included in the basis of LabVIEW. As a result, to take advantage of the embedded FPGA, you'll need to install the LabVIEW FPGA Module as well.

  As long as you have the FPGA modules and in real time, it seems to me that you should be able to control these devices with LabVIEW Base. Without these software components you will not be able to create an instance of the device target your LabVIEW project.

• The executable font size different from that in the enrironment of LabVIEW Development

  I created an executable of LabVIEW, but the size of the font used in the executable file is different from the original font used in the labVIEW development environment. How to solve this problem?

  Thank you.

  Ian

  
  

• Virtual LabVIEW Developer Days

  Dear experts LabVIEW,

  I think registration of the virtual Webcast LabVIEW Developer Days (from 15 to 17 May), but do not know if I have to pay any registration fees or watch the webcast. Advice or comments will be greatly appreciated.

  Sincerely,

  Fuh

  Dear Lynn,

  Thank you very much for your answer. I appreicate it. I search, but was unable to find anything saying that the webcast event is FREE. The fact that I can't find anything that indicates a charge does not mean that this event is free. I might have overlooked. So I think that prevention is better than cure. Actally, I sent a NI Marketing Manager (who sent a broadcast e-mail to many people, including me) on 25 April. Unfortunately, I don't have nothing heard back yet. I think that my email could have fallen a crack... Because I'm really thinking about the possibility to record the webcast event, I'm going with the last resource - post a question on the Discussion Board OR. Someone there may be able to help me.

  I'm sorry to post a question at a meeting of false. I've mixed up. Sorry! However, I appreciate your clarification. Now, I know (and am sure) this webcast event is FREE. I'll go ahead and sign up for this.

  Thank you much for your clarifications and have a nice day.

  Fuh

• How can I contact Alex Zambelli (Windows Media Player and VC-1 Codec, Software Test Engineer, Microsoft)?

  I just want to know how I can contact with Alex Zambelli (Windows Media Player and VC-1 Codec, Software Test Engineer, Microsoft)?
  I know maybe it is not a good place to ask this question but could not find anywhere else. I have a problem FPS and 3D.
  Thank you.

  You can leave a comment on his blog http://alexzambelli.com/blog/

  It is also on LinkedIn http://www.linkedin.com/in/alexzambelli?_mSplash=1

  There is an email address on this page http://alexzambelli.com/blog/about/

• SQL Developer: Failure-Test failed: IO error: got at least one by a CA read

  SQL Developer: Failure-Test failed: IO error: Got minus one since a call to reading
  
  Hello
  
  I'm sorry I know this is probably more frequently asked question, but I have no idea what I should get.
  I looked at the error message above to see if I could find a solution, but unfortunately I do not have.
  
  Right let me start with I'm a Total Noob... Well it terms of having to install Oracle 11 g myself.
  In my University they welcomed a database and we assigned to a user & pass it's how I was using SQL Developer,.
  but since I'm no longer a student at the University. I need to use the Oracle database.
  
  So I downloaded Oracle 11 g Enterprise installed on my laptop that I don't use much.
  Name of the database: Christiane
  
  It of the entire facility and seems to have succeeded, I went https://localhost:1158 / em (although not sure why em? what's the deal with that?) I thought that it would be Https://localhost:1158 / Christiane) anyway...
  Connected with the user of the System .
  Went to users and creates a named user: RUDUHR
  
  Thinking Yes its not work... go my other laptop open SQL Developer.
  
  Connection created with the following settings
  Name of con: RK
  User: RUDUHR
  Pass: TEST
  Con type: basic
  Role: by default
  Hostname: 192.168.0.8
  Port: 1158
  SID: Christiane
  
  It does not work well, why is that?
  192.168.0.8 is portable which oracle 11g installed and running.
  
  I even tried to use SYSTEM user to connect, but same error
  also tried to change the SID to em, it made no difference I get the error message status: failure Test failed: IO error: Got minus one since reading call
  
  So are am clueless... LOL I only know how to create tables and stuff not how to set up a database.
  and just to let you know that I transfer the port on me correct portable router.

  It does not work well, why is that?
  192.168.0.8 is portable which oracle 11g installed and running.

  It's because you read the documentation.

  1158 is the default port for Enterprise Manager
  1521 is the default port for Sqlnet.
  Your port number is incorrect.

  Of course, you can create your tables in EM too.

  As by the Forums of the label of the post (first link when you arrive at this page) it is recommended that read the documentation before asking an another Doc issue yet.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• How to: free account developer to test your own iOS on iPhone application using Xcode 7.2.1

  The free Xcode 7.2.1 iOS Developer membership feature I'm trying, I have installed xcode 7.2.1 and tried to test self written objective c code on my own in iPhone 5 s ios9.0.2.

  The sequence of error occurs as follows:

  (1) no signing identity valid (certificate and private key pair) have been found.

  Xcode can try to solve this problem. This will reset your signature code and parameters of provisioning of recommended values and solve problems with the signature of the identities and provisioning profiles.

  I clicked on the button "deal" and

  2) clicked "ADD" an APPLE ID account 'sign using the Apple ID ". I sign in using exist before APPLE ID.

  (3) the error said: an unexpected error has occurred. Please try again.  If the problem persists, contact the support of the Apple Developer program. https://developer.Apple.com/support

  No signature found identity code: no valid signature identity (certificate and private key pair) have been found.

  (4) I repeat the above steps, but mistakes persist.

  After failed attempts, I tried the steps of Xcode 7.2.1 still 3 days later using Apple ID sign. I could create IOS developer cert for free using Xcode > Preferences > ADD apple ID.

  I was able to compile the code and to load an app on my own device. Here are a few observations try this developer account "Apple ID sign" free:

  (1) the need to activate the WiFi on my a device and connect to a network to check your application before can run the application. Cannot run app offline.

  (2) there is no debugging, stepping in/out plus. Only can run application without debugging.

  Does anyone have any other comments?

• Runtime LabVIEW Developer Suite DVD

  Hello!

  I need to install runtime Labview on a PC.

  Where can I find it on my DVD of Developer Suite?

  (I would like to avoid downloading LV RTE Web site NOR)

  Thanks in advance for any help,

  Marco

  I'm sure it's for MS-DOS device drivers.

• How can I extend demo of LabVIEW Development 2012?

  Hello

  I would like to extend LabVIEW Full Development System version 2012... Yes 2012!

  On ni.com/extendevaluation, the version is that from 2013 to 2015.

  Is there another way to extend the trial?

  Thank you

  Stephanie

  Contact your local representative of NEITHER.  They have been known to pull all sorts of channels for me.

• Download LabVIEW Development System 2010 SP1 64 bit

  Hello

  I am looking to download the development system LabVIEW 2010 for 64 bit on windows Server 2008, but I can't find link: the only one I found is a 2011, and I don't want to upgrade the project for 2011.
  Best regards

  HI V. f.,.

  Simply call your local representative of NEITHER, they will help these issues...

• can labview call a test module

  Problems with a test dll that works in testing, but I get an error when you try to use the Assistant in labview, however I can use the protypye call library function node there.  Problem - the openComserialPort function (char * comPort, ErrStruct & err), how can you difine the parameters for the ErrStruct & an error of the game.

  Next Question, because this Dll runs in the bench trial, is their anyway export to work in LabVIEW.

  This Dll runs in the test bench, as export their anyway to work in LabVIEW.

  Yes it will work in LabVIEW course.

  How can you difine the parameters for the ErrStruct & an error of the game.

  It is a "pointer to a structure. You must specify the structure of the ErrStruct. Please include the description of this dll to help you better.

• How to develop and test a PACKAGE when my rights are granted a ROLE?

  I created a PACKAGE to test in our Dev database where my rights are granted through a ROLE. As I have since been aware, I can't refer to the objects that I have no direct access, even if they have been granted through a ROLE.

  I asked how to CREATE the PACKAGE, the answer was to CREATE objects in my own scheme. In appearance, so I do not qualify completely the names of objects, I should be able to compile the code.

  The question is, how do I test it later? I guess I can set the default schema for the session. In other words, have two connections to develop the code, the default schema is my own, the other where it is the application schema. So, I could use for the CREATE or REPLACE package statement and the other for testing.

  Does make sense? Is there a better method?

  I asked how to CREATE the PACKAGE, the answer was to CREATE objects in my own scheme. In appearance, so I do not qualify completely the names of objects, I should be able to compile the code.

  Correct - correctly create the package, you must be using the same rights that will be used when the package is deployed in production. There are two common way to do this

  1 create clone objects in your own schema as you pointed

  2. create the objects in the application schema.

  The question is, how do I test it later? I guess I can set the default schema for the session. In other words, have two connections to develop the code, the default schema is my own, the other where it is the application schema. So, I could use for the CREATE or REPLACE package statement and the other for testing.

  Does make sense? Is there a better method?

  Non - who has no sense. Put in CURRENT_SCHEMA does not change the privilege you need; It just makes the resolution process uses a different default schema.

  If SCOTT is the CURRENT_SCHEMA then a reference to the EMP table address the SCOTT. EMP table. You must always have the appropriate privileges on that table granted directly if you use a procedure named using privileges DEFINE.

  There are two types of tests involved. You can use your own objects and schema for the initial test. Copy data to local tables or make some up. Perform a test to ensure that your package seems to work correctly.

  Actual test should be performed using the actual application schema. Each environment (DEV, TEST, QA, PROD) should have a diagram of the application. If you have access to this scheme, as the owner of the schema, then unit tests you would run your DDL/DML deployment scripts in this scheme and make your tests.

  If you don't have access to the application development scheme then a DBA/developer with these privileges must execute your deployment scripts in this test environment.

  As a developer, it is usually your responsibility for creating deployment scripts that a DBA can run to deploy your code.

  1 DDL scripts create/drop/change all the objects required in your code

  2 DML scripts for insert/update/delete all data or changes that you perform the deployment

• How to develop and test the application mobile flex without the real device?

  I'm trying to read some information about it, but decided to ask also here.

  I have a project that has a company wants to grow me, it's for iPad. That's ok I am with Flex and the framework for web development, but not for mobile. Why? Because I have no idea how to test my application. I know generation ago it sort of the desktop version of the application with the change of the "back" button on the orientation stuff, but how do I know my application will look and work exactly the same (I mean NOT performance here). I mean you know how every android or iOS device have their native keyboard or native video player for example and I have only in the debug version of the application.

  The question is how to develop this application based on the desktop emulator or anything and then hope that my app looks and works on a device, as it should... Of course I can't afford to buy all the devices it is just to be able to test on it if necessary? So, how do you, how to test how my iPad app works on a device without a? I know I should get a licence from iOS dev to be able to package the app for iOS, but it's $ 99 per year or something like that I can handle, but how to test my application without having to buy the darn device? Are there any emulator for iPad or something like that I know what my customers will see when they get the application? One of my friends told me that the mac os x use the developers a tool - cause some kit of dev who has emulators for all iOS devices and you can build and test there immediately and that you can simulate virtually any combination of key for example, and he said he's working and seems to 1:1 as the real device but he didn't know if can I export an AIR application and try it like this, he only knew for app written in native code.

  If someone can just tell me how should I do this? Should I buy a mac os x computer laptop to test because I am a user of windows 7, or perhaps create a mac os x virtual machine and tests out there or maybe the only option is to actually buy the device... that would be terrible for a freelancer...

  I hope someone can save the day here! Thank you.

  F

  Since the AIR for iOS applications are compiled to ARM code you will not be able to run on iOS emulators running on Mac OSX.

  You can do a very simple test with the "Simulator" built into Flash Builder, but it is not much more than a window to AIR with a window size that matches the resolution of the selected iOS device.  When running in the simulator of the application is not compiled to ARM code so it will take a completely different code path than what will be the final release of iOS.

  Ultimately if you are developing for iOS with AIR nothing but for tests on real iOS devices.

• Best practices to develop and test AIR iOS multitouch applications

  I plan to change our practice of XCode/Objective C iPhone development in the AIR to take advantage of a larger pool of talent in the House. The biggest concern I have right now tests the functionality multitouch - the prospect of having to make the incremental generation, the sizing and deployment just to test and refine aspects multitouch of our projects is daunting, if not downright depressing.

  What tools / services or techniques have been developed to facilitate what is without a doubt one of the most frequent problems developing for multitouch iOS using a development based on Office AIR environment?

  @tomaugerdotcom

  Something like this might help: https://testflightapp.com/

  Concevably, you could roll your own service internal if what an individual does not suit you. (I have no knowledge about how they do it, but should not be difficult to understand since the rules binding Apple would only a few possibilities).

  USB app install and debugging is not supported on iOS. You must use wireless.

  Another option specifically for multi-touch dev/test, is to use an Android device.